Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric relaxation, ac conductivity and electric modulus in poly(vinylidene fluoride)/NaY zeolite composites

  • Lopes, A.C.
  • Costa, C.M.
  • Neves, I.C.
  • Lanceros-Mendez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(vinylidene fluoride)/zeolite composites prepared by solvent casting at 190 °C have been investigated by scanning electronic microscopy, Fourier transformed infrared spectroscopy and broadband dielectric relaxation spectroscopy. The inclusion of the NaY zeolite filler in the polymer matrix induces the crystallization of poly(vinylidene fluoride), PVDF, in the electroactive γ phase. The dielectric function, ac conductivity and electric modulus of the composites were investigated as a function of zeolite content in the frequency range from 0.1 Hz to 1×107 Hz at temperatures from −120 to 150 °C. The main relaxation process (β-relaxation) of the amorphous phase of the polymer matrix is not affected by the presence of the zeolite, as verified by the similar relaxation parameters obtained for the pure polymer and for the PVDF/NaY4% composite. In a similar way, the zeolite low temperature relaxation is not significantly affected by the polymer phase. On the other hand, the electric modulus formalismreveals significant contributions of the fillers to the electrical permittivity and conductivity of the composites. The presence of the zeolite particles increases ac conductivity and theMaxwell Wagner Sillars contribution that is predominant at low frequencies with respect to ohmic contribution to permittivity., This work is partially funded by the Centre of Physics and Centre of Chemistry (University of Minho, Portugal) and by FEDER funds through the Programa Operacional Factores de Competitividade-COMPETE and by national funds by FCT-Fundação para a Ciência e a Tecnologia, project references, NANO/NMed-SD/0156/2007, PTDC/CTM/69316/2006, PEst-C/QUI/UI0686/2011 and PTDC/CTM-NAN/112574/2009. A.C.L. and C.M.C. also thank the FCT for the grant SFRH/BD/62507/2009 and SFRH/BD/68499/2010, respectively. The authors also thank support from the COST Action MP1003, the European Scientific Network for Artificial Muscles (ESNAM)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of ferrite nanoparticle type and content on the crystallization kinetics and electroactive phase nucleation of poly(vinilidene fluoride)

  • Sencadas, Vitor Joao Gomes Da Silva
  • Pitaes, Alexandre
  • Benelmekki, Maria
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This work reports on the nucleation of the beta-phase of poly(vinylidene fluoride) (PVDF) by incorporating CoFe2O4 and NiFe2O4 nanoparticles, leading in this way to the preparation of magnetoelectric composites. The fraction of filler nanoparticles needed to produce the same beta- to alpha-phase ratio in crystallized PVDF is 1 order of magnitude lower in the cobalt ferrite nanoparticles. The interaction between nanoparticles and PVDF chains induce the all-trans conformation in PVDF segments, and this structure then propagates in crystal growth. The nucleation kinetics is enhanced by the presence of nanoparticles, as corroborated by the increasing number of spherulites with increasing nanoparticle content and by the variations of the Avrami's exponent. Further, the decrease of the crystalline fraction of PVDF with increasing nanoparticle content indicates that an important fraction of polymer chains are confined in interphases with the filler particle., This work is funded by FEDER funds through the “Programa Operacional Factores de Competitividade COMPETE” and by national funds by FCT- Fundac-~ao para a Ci^encia e a Tecnologia, project references NANO/NMed-SD/0156/2007 and PTDC/CTM/69316/2006. V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. P.M. thanks the FCT for the SFRH/BD/45265/2008 grant. J.L.G.-R. acknowledges the support of the Spanish Ministry of Education through Project No. MAT2010-21611-C03-01 (including the FEDER financial support), Project EUI2008-00126, and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of filler size and concentration on the low and high temperature dielectric response of poly(vinylidene fluoride) /Pb(Zr0.53Ti0.47)O3 composites

  • Firmino Mendes, S.
  • Costa, C.M.
  • Andrio Baldalo, A.
  • Sencadas, V.
  • Gregorio Jr., R.,
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3 ([PVDF]1 − x/[PZT]x ) composites of volume fractions x and (0–3) type connectivity were prepared in the form of thin films. The films were prepared by solvent casting with PZT powder of 0.84, 1.86, and 2.35 μm average size with filler contents up to 40 % volume. The crystalline phase of the polymer matrix was the nonpolar α-phase and the polar β-phase. Dielectric measurements were performed in order to evaluate the influence of the filler size and content as well as the effect of the polymer matrix in the overall response of the material. No nucleation effect of any of the phases was observed for the used fillers. The spherulitic structure of the pure α-PVDF and the characteristic porosity of the β-phase material are destroyed for high PZT volume fractions. The inclusion of ceramic particles in the PVDF polymer matrix increases the complex dielectric constant of the composites independently of the PVDF polymer matrix. The dielectric properties of the composites are mainly affected by the amount of the ceramic particles. With respect to the relaxation processes of the polymer, the activation energy of the αa-relaxation increases and the glass transition temperature decreases with increasing particle size and content. The high-temperature conductivity decreases with increasing filler content and there is an important contribution of the Maxwell-Wagner-Sillars effect to the overall dielectric response., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COM-PETE" and by national funds by FCT-Fundacao para a Ciencia e a Tecnologia, project references PTDC/CTM/69316/2006, PTDC/CTM-NAN/112574/2009, and NANO/NMed-SD/0156/2007. V. S., S. Firmino Mendes and C. M. Costa thank the FCT for the SFRH/BPD/63148/2009, SFRH/BD/22506/2005 and SFRH/BD/68499/2010 grants, respectively. JLGR acknowledge the support of the Spanish Ministry of Education through project No. MAT2007-66759-C03-01 (including the FEDER financial support), and founding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors thank the support from the COST Action MP1003, 2010, 'European Scientific Network for Artificial Muscles' (ESNAM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blends for battery separators in lithium-ion applications

  • Costa, Carlos M.
  • Nunes-Pereira, J.
  • Rodrigues, L.C.
  • Silva, M.M.
  • Lanceros-Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polymer blends based on poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide), P(VDFTrFE)/PEO for Li-ion battery separator applications have been prepared through solvent casting technique. The microstructure, hydrophilicity and electrolyte uptake strongly depend on PEO content within the blend. The best value of ionic conductivity at room temperature was 0.25 mS cm−1 for the 60/40 membrane. The membranes are electrochemically stable., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds by FCT - Fundacao para a Ciencia e a Tecnologia, project references Project PTDC/CTM/69316/2006, NANO/NMed-SD/0156/2007 and Pest-C/QUI/UIO686/2011 and grant SFRH/BD/68499/2010 (C.M.C) and SFRH/BD/66930/2009 CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the morphology and crystallinity of poly(L-lactide acid) electrospun membranes

  • Ribeiro, Clarisse
  • Sencadas, Vitor Joao Gomes Da Silva
  • Miguel Costa, Carlos
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Mendez, Senentxu
[EN] Biodegradable poly(L-lactic acid) (PLLA) microfibers were prepared by electrospinning by varying the applied potential, solution flow rate and collector conditions. PLLA fibers with smoothly oriented and random morphologies were obtained and characterized by scanning electron microscopy. The optimum fiber orientation was obtained at 1000 rpm using a 20.3 cm diameter collecting drum, while for higher and lower drum rotation speeds, the rapid random motion of the jets resulted in a random fiber distribution. The deformation of the jet with rapid solidification during electrospinning often results in a metastable phase. PLLA electrospun fibers are amorphous but contain numerous crystal nuclei that rapidly grow when the sample is heated to 70-140 °C. In this way, the degree of crystallinity of the fibers can be tailored between 0 and 50% by annealing. Infrared transmission spectra revealed that the processing conditions do not affect the PLLA samples at the molecular level and that the crystallinity of the samples is related to the presence of ¿-crystals. © 2011 National Institute for Materials Science., SEM observations were conducted by the authors with the kind help of Jose Carlos Rodriguez from the Microscopy Service of Universidad Politecnica de Valencia, whose advice is greatly appreciated. We thank Centro for Nano and Microtechnologies (CeNTI), Famalicao, Portugal, for technical support and the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM/73030/2006, PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007. VS thanks FCT for the SFRH/BPD/63148/2009 grant and CR thanks IINL for a PhD grant. JLGR acknowledges the support by the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including FEDER financial support), by Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement with Conselleria de Sanidad (Generalitat Valenciana) and Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate

  • California, António
  • Cardoso, Vanessa F.
  • Costa, Carlos M.
  • Sencadas, Vitor
  • Botelho, Gabriela
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Mendez, Senentxu
Ferroelectric macroporous poly(vinylidene fluoride-trifluoroethylene) membranes have been produced by isothermal crystallization from the solution at different temperatures starting from different diluted solutions of the co-polymer in dimethylformamide. In this way pore architecture, consisting in interconnected spherical pores can be obtained. The mechanism and kinetics of solvent evaporation was investigated and related to the evolution of the polymer microstructure. The mechanism underlying the pattern formation has been discussed on the light of the Flory-Huggins (FH) lattice theory, grain boundary effects and the Cahn-Hilliard equation for mass conservation systems. It was also observed that the temperature or initial concentration of the crystallization process does not affect the phase, ferroelectric transition temperature or the melting temperature of the polymer., The authors thank the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM-NAN/112574/2009, PTDC/CTM/73030/2006, PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007. V.F., C.M.C. and V.S. thank the FCT for the SFRH/BD/44289/2008, SFRH/BD/68499/2010, SFRH/BPD/63148/2009 grants, respectively. JLGR acknowledge the funding from the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-09) of the Universidad Politecnica de Valencia for a short stay in Universidade do Minho, Braga, the support of the Spanish Ministry of Science through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Institute de Salud Carlos III (Ministry of Science and Innovation). The authors wish also thank the CeNTI - Centre for Nanotechnology and Smart Materials, Rua Fernando Mesquita, 2782, 4760-034 Vila Nova de Famalicao, Portugal for allowing the use of some experimental equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of solvent evaporation in the microstructure of electroactive beta-poly(vinylidene fluoride) membranes obtained by isothermal crystallization

  • Magalhaes, R.
  • Duraes, N.
  • Silva, M.
  • Silva, J.
  • Sencadas, V.
  • Botelho, G.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Electroactive beta-poly(vinylidene fluoride) (PVDF) membranes were obtained by isothermal crystallization from the solution. Different morphologies and microstructures were obtained by crystallizing at different temperatures. The mechanism and kinetics of solvent evaporation from the polymeric solution were investigated using isothermal thermogravimetric analysis. The kinetic parameters and the activation energy were also calculated. The solvent evaporation is ruled by two steps, related with a metastable-unstable-metastable transition in the solution phase diagram. Scanning electron microscopy revealed the porous structure and the variations of the morphology with the variation of the isothermal evaporation temperature. Finally, the infrared spectroscopy measurements confirm that the polymer crystallizes in the electroactive beta-phase of PVDF., The authors thank the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM/73030/2006, PTDC/CTM/69316/2006, and NANO/NMed-SD/0156/2007. V. Sencadas thanks the FCT for the SFRH/BPD/63148/2009 grant. JLGR acknowledges the funding from the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-09) of the Universidad Politecnica de Valencia for a short stay in Universidade do Minho, Braga, the support of the Spanish Ministry of Science through project No. MAT2007-66759-C03-01 (including the FEDER financial support), and funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors also thank Solvay for providing the excellent quality material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of electrospinning parameters on Poly(hydroxybutyrate) electrospun membranes fiber size and distribution

  • Correia, Daniela M.
  • Ribeiro, Clarisse
  • Ferreira, Jose C. C.
  • Botelho, Gabriela
  • Lanceros Mendez, Senen
  • Sencadas, Vitor
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Poly(hydroxybutyrate) (PHB) obtained from sugar cane waste was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 degrees C. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. Conversely, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of similar to 2.0 mu m but for electric fields higher than 1.5 kV cm(-1), a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53% was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ mol(-1). Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications., Contract grant sponsor: FEDER; contract grant sponsor: Programa Operacional Factores de Competitividade-COMPETE; contract grant sponsor: FCT-Fundacao para a Ciencia e a Tecnologia; contract grant numbers: NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006, and PTDC/CTM/69316/2006; contract grant sponsor: COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'; contract grant sponsor: FCT; contract grant numbers: SFRH/BPD/63148/2009 and SFRH/BD/82411/2011; contract grant sponsor: IINL; contract grant sponsor: Spanish Ministry of Science and Innovation (including the FEDER financial support); contract grant number: MAT2010-21611-C03-01; contract grant sponsors: VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, and Instituto de Salud Carlos III (with assistance from the European Regional Development Fund).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of crystallinity and fiber orientation on hydrophobicity and biological response of poly(L-lactide) electrospun mats

  • Areias, A.C.
  • Ribeiro, Clarisse
  • Sencadas, Victor
  • Garcia Giralt, Natalia
  • Diez Perez, A.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(L-lactide) electrospun mats have been produced with random and aligned fiber orientation and degrees of crystallinity from 0 up to nearly 50%. These two factors, fiber alignment and degree of crystallinity, strongly affect the hydrophobicity of the samples, this being larger for the aligned fiber mats and for the fibers with a higher degree of crystallinity. Whereas, the first effect can be associated with a decrease in the degree of porosity, the second should be related to an increase in fiber stiffness as the observed fiber roughness variations do not show strong differences between the samples. Proliferation of human chondrocytes cultured in a monolayer on these substrates is similar in both aligned and non-aligned amorphous mats. Crystallization of the aligned mats, on the other hand, nearly suppresses proliferation and the cells produce higher amounts of aggrecan, characteristic of the extracellular matrix of hyaline cartilage., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE'' and by national funds by FCT (Fundacao para a Ciencia e a Tecnologia, project references PTDC/CTM/69316/2006, PTDC/CTM-NAN/112574/2009, and NANO/NMed-SD/0156/2007). V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. C. R. thanks the IINL for the financial support via a PhD grant. NG thanks Red Tematica de Investigacion Cooperativa en Envejecimiento y Fragilidad (RETICEF), which is an initiative of the ISCIII and the Catalan Government (2009SGR00848). JLGR acknowledges the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support). The authors thank the support from the COST Action MP1003, 2010, 'European Scientific Network for Artificial Muscles' (ESNAM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Relaxation dynamics of poly(vinylidene fluoride) studied by dynamical mechanical measurements and dielectric spectroscopy

  • Sencadas, V.
  • Lanceros-Mendez, S.
  • Andrio Balado, A.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this study is to analyze the mobility of polymer chains in semicrystalline poly(vinylidene fluoride) (PVDF). PVDF crystallizes from the melt in the crystalline phase. The transformation from the phase to the electroactive phase can be induced by stretching at temperatures in the range between 80 and 140 ◦C. The spherulitic structure of the crystalline phase is deformed during stretching to form fibrils oriented in the direction of the strain. The amorphous phase confined among the crystalline lamellae is distorted as well and some degree of orientation of the polymer chains is expected. Dynamicmechanical and dielectric spectroscopy measurements were performed in PVDF films stretched to strain ratios up to 5 at temperatures between 80 and 140 ◦C. Dynamic-mechanical measurements were conducted between −60 ◦C and melting and in this temperature range the relaxation spectra show the main relaxation of the amorphous phase (called -relaxation) and at higher temperatures a relaxation related to crystallites motions (c-relaxation). Although the mean relaxation times of the -relaxation are nearly equal in PVDF before and after crystal phase transformation, a significant change of shape of the relaxation spectrum proves the effect of chain distortion due to crystal reorganization. In stretched PVDF the elastic modulus of the polymer in the direction of deformation is significantly higher than in the transversal one, as expected by chain and crystals fibril orientation. The recovery of the deformation when the sample is heated is related with the appearance of the c-relaxation. Dielectric spectroscopy spectrum shows the main relaxation of the amorphous phase and a secondary process (-relaxation) at lower temperatures. Stretching produces significant changes in the relaxation processes, mainly in the strength and shape of the main relaxation. The Havriliak-Negami function has been applied to analyze the dielectric response., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade-COMPETE" and by national funds by FCT-Fundacao para a Ciencia e Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM/69316/2006 and PTDC/CTM-NAN/112574/2009. V. S. thanks the FCT for the SFRH/BPD/63148/2009 grant. JLGR acknowledges the support of the Spanish Ministry of Science and Innovation through MAT2010-21611-C03-01 (including the FEDER financial support), and EUI2008-00126 projects and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors also acknowledge support from the COST Action MP1003, 2010 "European Scientific Network for Artificial Muscles".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrical and thermal behavior of gamma-phase poly(vinylidene fluoride)/NaY zeolite composites

  • Lopes, A. C.
  • Caparros, C.
  • Neves, I. C.
  • Lanceros-Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Poly(vinylidene fluoride), PVDF, based composites with increasing NaY zeolite content up to 32 wt.% have been processed by solvent casting and melt crystallization. Depending on the melting temperature of the polymer, the composite crystallizes in the electroactive gamma or non electroactive a-phase of the polymer. The dielectric constant at room temperature reaches values larger that 1000 for the 32 wt.% composite at 1 kHz and it is mainly attributed to restricted ion mobility and interfacial polarization effects due to the zeolite inclusion, leading also to high dielectric losses. For the higher zeolite concentrations the composite d.c. electrical conductivity is characterized by two conducting regimes separated by a concentration independent breaking voltage of 4 V, which is associated to an intrazeolite charge transport., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by National funds by FCT- Fundacao para a Ciencia e a Tecnologia, Project references NANO/NMed-SD/0156/2007, PTDC/CTM/69316/2006, PEst-C/QUI/L110686/2011 and PTDC/CTM-NAN/112574/2009. ACL thanks the FCT for the Grant SFRH/BD/62507/2009. The authors also thank support from the COST Action MP1003, the 'European Scientific Network for Artificial Muscles' (ESNAM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Composition-dependent physical properties of poly[(vinylidene fluoride)-co-trifluoroethylene] poly(ethylene oxide) blends

  • Costa, Carlos M.
  • Tamano Machiavello, M.N.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polymer blends based on poly(vinylidene fluoride-co-trifluoroethylene) copolymers, P(VDF-TrFE), and poly(ethylene oxide), PEO, with varying compositions have been prepared by solvent casting. In this way, P(VDF-TrFE) crystallizes from the solution while solvent evaporates, while PEO crystallizes from the melt during cooling to room temperature. The surface morphology of the polymer blends indicates the transition from the fibrillar microstructure typical of PVDF-TrFE to the spherulite structure characteristic of PEO. The vibration mode characteristics of P(VDF-TrFE) are not influenced by the presence of PEO in the polymer blend. Confinement of PEO in the P(VDF-TrFE) phase change the conformation of PEO from trans to helix, increasing this transformation for increasing P(VDF-TrFE) content in the polymer blends. Sequential crystallization of the two polymers produce separated amorphous phases whose independent cooperative conformational motions are revealed by two main dynamic-mechanical relaxations. No chemical interaction seems to exist between the polymers within the blend., This study is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE'' and by national funds by FCT-Fundacao para a Ciencia e a Tecnologia, Project References NANO/NMed-SD/0156/2007 and PTDC/CTM/69316/2006. C. M. C. also thanks the FCT for the Grant SFRH/BD/68499/2010. The authors also thank support from the COST Action MP1003, the "European Scientific Network for Artificial Muscles'' (ESNAM). JLGR acknowledges the support of the Spanish Ministry of Education through Project No. MAT2010-21611-C03-01 (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of fiber diameter and crystallinity on the stability of electrospun poly(L-lactic acid) membranes to hydrolytic degradation

  • Dias, Juliana C.
  • Ribeiro, Clarisse
  • Sencadas, V.
  • Botelho, G.
  • Lanceros Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Hydrolytic degradation of electrospun mats of poly(l-lactic acid), PLLA, as a function of crystallinity and fiber diameter has been studied. The degradation in a saline phosphate buffer solution (PBS) up to 20 weeks produced a slight decrease in the sample mass but a clear decrease of the polymer average molecular weight in the amorphous fibers. This effect decreases as crystallinity increases. It is important for applications that morphological characteristics of the membranes such as average fiber diameter and membrane porosity are also affected by the degradation process. Fiber diameter increases while membrane porosity decreases, resulting in closer packed fibers due to the release of internal tensions related to the electrospinning and/or thermal treatment processes., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds arranged by FCT - Fundacao para a Ciencia e a Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006 and PTDC/CTM/69316/2006. The authors also thank support from the COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'. V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. C. R. thanks the Iberian Institute of Nanotechnology Laboratory (IINL) for a PhD grant. JLGR acknowledge the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support).