Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Study and optimization of alternative MBE‐deposited metallic precursors for highly efficient kesterite CZTSe:Ge solar cells

  • Giraldo, Sergio
  • Kim, Shinho
  • Andrade‐Arvizu, Jacob Antonio
  • Alcobé i Ollé, Xavier
  • Malerba, Claudia
  • Valentini, Matteo
  • Tampo, Hitoshi
  • Shibata, Hajime
  • Izquierdo‐Roca, Victor
  • Pérez Rodríguez, Alejandro
  • Saucedo Silva, Edgardo
Nowadays, most of the best efficiencies of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are obtained from absorber layers fabricated using sequential processes, including the deposition of metallic stack precursors, typically by sputtering, and followed by reactive annealing under chalcogen atmosphere. The sputtering technique is widely known for the easy growth of metallic layers, although the deposition rates, growth morphology and nucleation, or the roughness can sometimes be an issue leading to inhomogeneities in the final layers. Nevertheless, MBE (molecular beam epitaxy) technique could have some advantages to obtain high‐quality metallic layers, with accurate control of the growth due to ultra‐high vacuum conditions and high purity. In this work, we study the use of advanced MBE systems to grow metallic stack precursors, alternatively to sputtering or thermal evaporation techniques, to obtain high‐quality CZTSe:Ge absorbers. Due to differences in the nature of each type of precursor, thermal annealing optimizations are presented by modifying some critical selenization parameters, such as the temperature or the selenium amount in order to obtain well‐crystallized absorbers. Detailed morphological, compositional, and structural characterizations show relevant features of each precursor, mainly related to the formation of MoSe2 at the back interface, and Se and Sn composition after selenization in different conditions. Regarding the solar cell devices, main efficiency limitations come from VOC and FF, which could be tentatively related to a noncontrolled selenization; different precursor reactivity, porosity, or composition; and different alkali diffusion during the reactive annealing. Finally, in the first optimization, a 9.2% efficiency device has been achieved with promising perspectives for future improvements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High recovery of selenium from kesterite‐based photovoltaic cells

  • Asensio, María Pilar
  • Abás, Elisa
  • Pinilla Ibarz, José Luis
  • Laguna, Mariano
8 figures, 5 tables.-- Supplementary information available, The use of photovoltaic cells is constantly increasing and, in particular, a new generation of thin‐film photovoltaic (PV) cells is under development. The absorber of these new cells, kesterite (CZT(S)Se), is composed of abundant chemical elements. Nonetheless, the development of the recycling process for these elements is indispensable for circular economy. This research is focused on the recovery of selenium by thermal oxidation and subsequent reduction. Thus, recycling of selenium has been firstly studied on synthetic kesterite and then validated in a real sample of kesterite extracted from glass‐based PV cells. The best results were obtained in a vertical tubular furnace at 750 °C with an input of 20 mL/min of air. The posterior reduction process of selenium oxide was achieved by ascorbic acid, a common and economic reagent. Real kesterite was extracted from PV cells by thermal treatment at 90 °C for 1 hour to remove the encapsulant and ulterior treatment with HCl for the release of kesterite absorber. Optimal conditions from synthetic kesterite were applied to a real sample, recovering more than 90 % of selenium with a purity of 99.4 %., Recovery of selenium from kesterite (Cu2ZnSn(S,Se)4) thin film photovoltaic cells by oxidation in a vertical tubular furnace at 750 °C with an input of 20 mL/min of air is described. The only volatile oxide, SeO2, condenses in the cold part of the oven. The posterior reduction process was achieved by ascorbic acid, in a Circular Economy process., This research was supported by the H2020 Programme under the project STARCELL (H2020‐NMBP‐03‐2016‐720907)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical routes for the synthesis of kesterite

  • Ratz, T.
  • Brammertz, G.
  • Caballero, Raquel
  • León, M.
  • Canulescu, S.
  • Schou, J.
  • Gütay, L.
  • Pareek, D.
  • Taskesen, T.
  • Kim, D. H.
  • Kang, J. K.
  • Malerba, C.
  • Redinger, A.
  • Saucedo, E.
  • Shin, B.
  • Tampo, H.
  • Timmo, K.
  • Nguyen, N. D.
  • Vermang, B.
23 pages, 7 figures, 2 tables, This paper provides an overview of the physical vapor technologies used to synthesize Cu2ZnSn(S,Se)4 thin films as absorber layers for photovoltaic applications. Through the years, CZT(S,Se) thin films have been fabricated using sequential stacking or co-sputtering of precursors as well as using sequential or co-evaporation of elemental sources, leading to high-efficient solar cells. In addition, pulsed laser deposition of composite targets and monograin growth by the molten salt method were developed as alternative methods for kesterite layers deposition. This review presents the growing increase of the kesterite-based solar cell efficiencies achieved over the recent years. A historical description of the main issues limiting this efficiency and of the experimental pathways designed to prevent or limit these issues is provided and discussed as well. A final section is dedicated to the description of promising process steps aiming at further improvements of solar cell efficiency, such as alkali doping and bandgap grading., RCaballero and MLeón acknowledge financial support via the Spanish Ministry of Science, Innovation and Universities project (WINCOST,ENE2016-80788-C5-2-R) and thank H2020 EU Programme under the project INFINITE-CELL(H2020-MSCA-RISE-2017-777968). SCanulescu and JSchou acknowledge the support from Innovation Fund Denmark. D-Kim acknowledges financial support via the DGISTR&DProgram of the Ministry of Science and ICT, KOREA(18-BD-05). CMalerba acknowledges the support from the Italian Ministry of Economic Development in the framework of the Operating Agreement with ENEA for the Research on the Electric System. A Redinger acknowledges financial support via the FNR Attract program, Project : SUNSPOT, Nr. 11244141. 6. E Saucedo thanks H2020EUProgramme under the projects STARCELL (H2020-NMBP-03-2016-720907) and INFINITE-CELL(H2020-MSCA-RISE-2017-777968), the Spanish Ministry of Science, Innovation and Universities for the IGNITEproject(ENE2017-87671-C3-1-R),and the European Regional Development Funds (ERDF, FEDER Programa Competitivit at de Cataluny a2007–2013). IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the‘Generalitat de Catalunya’ (Ref.2017SGR862). Taltech acknowledges financial support via the Estonian Ministry of Education and Research funding project IUT19-28 and the European Union Regional Development Fund, ProjectTK141. B Vermang has received funding from the European Research Council (ERC) under the European Union’s Horizon2020 Research and Innovation Programme(GrantAgreement No 715027)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High Recovery of Selenium from Kesterite-Based Photovoltaic Cells

  • Asensio, M.P.
  • Abás, E.
  • Pinilla, J.L.
  • Laguna, M.
The use of photovoltaic cells is constantly increasing and, in particular, a new generation of thin-film photovoltaic (PV) cells is under development. The absorber of these new cells, kesterite (CZT(S)Se), is composed of abundant chemical elements. Nonetheless, the development of the recycling process for these elements is indispensable for circular economy. This research is focused on the recovery of selenium by thermal oxidation and subsequent reduction. Thus, recycling of selenium has been firstly studied on synthetic kesterite and then validated in a real sample of kesterite extracted from glass-based PV cells. The best results were obtained in a vertical tubular furnace at 750 °C with an input of 20 mL/min of air. The posterior reduction process of selenium oxide was achieved by ascorbic acid, a common and economic reagent. Real kesterite was extracted from PV cells by thermal treatment at 90 °C for 1 hour to remove the encapsulant and ulterior treatment with HCl for the release of kesterite absorber. Optimal conditions from synthetic kesterite were applied to a real sample, recovering more than 90 % of selenium with a purity of 99.4 %.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Study and optimization of alternative MBE‐deposited metallic precursors for highly efficient kesterite CZTSe:Ge solar cells

  • Giraldo, Sergio
  • Kim, Shinho
  • Andrade‐Arvizu, Jacob Antonio
  • Alcobé i Ollé, Xavier
  • Malerba, Claudia
  • Valentini, Matteo
  • Tampo, Hitoshi
  • Shibata, Hajime
  • Izquierdo‐Roca, Victor
  • Pérez Rodríguez, Alejandro
  • Saucedo Silva, Edgardo
Nowadays, most of the best efficiencies of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are obtained from absorber layers fabricated using sequential processes, including the deposition of metallic stack precursors, typically by sputtering, and followed by reactive annealing under chalcogen atmosphere. The sputtering technique is widely known for the easy growth of metallic layers, although the deposition rates, growth morphology and nucleation, or the roughness can sometimes be an issue leading to inhomogeneities in the final layers. Nevertheless, MBE (molecular beam epitaxy) technique could have some advantages to obtain high‐quality metallic layers, with accurate control of the growth due to ultra‐high vacuum conditions and high purity. In this work, we study the use of advanced MBE systems to grow metallic stack precursors, alternatively to sputtering or thermal evaporation techniques, to obtain high‐quality CZTSe:Ge absorbers. Due to differences in the nature of each type of precursor, thermal annealing optimizations are presented by modifying some critical selenization parameters, such as the temperature or the selenium amount in order to obtain well‐crystallized absorbers. Detailed morphological, compositional, and structural characterizations show relevant features of each precursor, mainly related to the formation of MoSe2 at the back interface, and Se and Sn composition after selenization in different conditions. Regarding the solar cell devices, main efficiency limitations come from VOC and FF, which could be tentatively related to a noncontrolled selenization; different precursor reactivity, porosity, or composition; and different alkali diffusion during the reactive annealing. Finally, in the first optimization, a 9.2% efficiency device has been achieved with promising perspectives for future improvements.