Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Effects of the diffusive mixing and self-discharge reactions in microfluidic membraneless vanadium redox flow batteries

  • Ibañez, Santiago E.
  • Quintero, Alberto E.
  • García-Salaberri, Pablo A.
  • Vera Coello, Marcos
Microfluidic-based membraneless redox flow batteries have been recently proposed and tested with the aim of removing one of the most expensive and problematic components of the system, the ion-exchange membrane. In this promising design, the electrolytes are allowed to flow parallel to each other along microchannels, where they remain separated thanks to the laminar flow conditions prevailing at sub-millimeter scales, which prevent the convective mixing of both streams. The lack of membrane enhances proton transfer and simplifies overall system design at the expense of larger crossover rates of vanadium ions. The aim of this work is to provide estimates for the crossover rates induced by the combined action of active species diffusion and homogeneous self-discharge reactions. As the rate of these reactions is still uncertain, two limiting cases are addressed: infinitely slow (frozen chemistry) and infinitely fast (chemical equilibrium) reactions. These two limits provide lower and upper bounds for the crossover rates in microfluidic vanadium redox flow batteries, which can be conveniently expressed in terms of analytical or semi-analytical expressions. In summary, the analysis presented herein provides design guidelines to evaluate the capacity fade resulting from the combined effect of vanadium cross-over and self-discharge reactions in these emerging systems., This work has been partially funded by the Agencia Estatal de Investigación (PID2019-106740RB-I00/AEI/10.13039/501100011033), by Grant IND2019/AMB-17273 of the Comunidad de Madrid and by project MFreeB which have received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 726217). S. E. Ibáñez gratefully acknowledges Dr. Rebeca Marcilla for its insightful discussions. P.A. García-Salaberri also acknowledges the support of the project PEM4ENERGY-CM-UC3M funded by the call "Programa de apoyo a la realización de proyectos interdisciplinares de I+D para jóvenes investigadores de la Universidad Carlos III de Madrid 2019-2020" under the frame of the "Convenio Plurianual Comunidad de Madrid-Universidad Carlos III de Madrid".
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Mathematical modelling of a membrane-less redox flow battery based on immiscible electrolytes

  • Ruiz Martín, Desirée
  • Moreno Boza, Daniel
  • Marcilla, Rebeca
  • Vera Coello, Marcos
  • Sánchez Sanz, Mario
We present a mathematical model to study the steady-state performance of a membrane-less reversible redox flow battery formed by two immiscible electrolytes that spontaneously form a liquid-liquid system separated by a well defined interface. The model assumes a two-dimensional battery with two coflowing electrolytes and flat electrodes at the channel walls. In this configuration, the analysis of the far downstream solution indicates that the interface remains stable in all the parameter range covered by this study. To simplify the description of the problem, we use the dilute solution theory to decouple the calculation of the velocity and species concentration fields. Once the velocity field is known, we obtain the distribution of the mobile ionic species along with the current and the electric potential field of the flowing electrolyte solution. The numerical integration of the problem provides the variation of the battery current density Iapp with the State of Charge (SoC) for different applied cell voltages Vcell. A detailed analysis of the concentration density plots indicates that the normal operation of the battery is interrupted when reactant depletion is achieved near the negative electrode both during charge and discharge. The effect of the electrolyte flow on the performance of the system is studied by varying the Reynolds, Re and Péclet, Pe, numbers. As expected, the flow velocity only affects the polarization curve in the concentration polarization region, when is well below the equilibrium potential, resulting in limiting current densities that grow with Re......, This work has been partially funded by the Spanish Agencia Estatal de Investigación under projects (PID2019-106740RB- I00 and PID2019-108592RB-C41/AEI/10.13039/50110 0 011033), by Grant IND2019/AMB-17273 of the Comunidad de Madrid and by project MFreeB which have received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 726217). D. Ruiz-Martín acknowledges the support of an FPI predoctoral fellowship (BES-2016-078629) under project ENE2015-68703-C2-1-R (MINECO/FEDER, UE) and the insigh- ful conversations with professor Mark Blyth during her research visit at the University of East Anglia (UK).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

High-Performance All-Organic Aqueous Batteries Based on a Poly(Imide) Anode and Poly(Catechol) Cathode

  • Patil, Nagaraj
  • Mavrandonakis, Andreas
  • Jérôme, Christine
  • Detrembleur, Christophe
  • Casado Pérez, Nerea
  • Mecerreyes Molero, David
  • Palma, Jesús
  • Marcilla, Rebeca
Aqueous all-polymer batteries (AqPBs) are foreseen as promising solutions for safe, sustainable, and high-performance energy storage applications. Nevertheless, their development is still challenging as it demands precise optimization of both electrodes and the electrolyte composition to be able to sustain a stable redox activity, while delivering an optimal voltage output. Herein, we report AqPBs based on a poly(imide) (PI) anode and poly(catechol) (PC) cathode that exhibit tunable cell voltage depending on the salt used in the aqueous electrolyte, i.e., 0.58, 0.74, 0.89, and 0.95 V, respectively, when Li+, Zn2+, Al3+, and Li+/H+ were utilized as charge carriers. The PI-PC full-cell delivers the best rate performance (a sub-second charge/discharge) and cycling stability (80% capacity retention over 1000 cycles at 5 A g(-1)) in Li+. Furthermore, a maximum energy/power density of 80.6 W h kg(anode+cathode)(-1)/348 kW kg(anode+cathode)(-1) is achieved in Li+/H+, superior to most of the previously reported AqPBs., RM, NP and AM thank the Spanish Ministry of Science, Innovation and Universities through the SUSBAT project (Ref. RTI2018-101049-B-I00) (MINECO/FEDER, UE) and the European Research Council (ERC) through the "MFreeB" project (grant agreement No. 726217) for financial support. NP also appreciates Spanish MINECO for the Juan de la Cierva-formation fellowship [FJC2018-037781-I] received to carry out this work. AM acknowledges the TALENTO grant (2017-T1/AMB-5264) from the Comunidad de Madrid for financial support. The authors acknowledge the computing facilities of CSUC for providing resources that contributed to the research results reported within this paper. DM and NC are grateful to the financial support of the European Research Council by the Proof of Concept Grant Innovative Polymeric Batteries by 3D Printing (iPes-3DBat) 789875. CD and CJ thank the "Fonds de la Recherche Scientifique" (FRS-FNRS) for funding.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the role of supporting electrolytes in organic redox flow battery performance

  • Navalpotro, Paula
  • Mavrantonakis, Andreas
  • Marcilla, Rebeca
This article is part of a Special issue entitled: ‘HYCELTEC2024’ published in Journal of Energy Storage., Redox Flow Batteries (RFBs) are promising energy storage systems to mitigate the fluctuations in renewable energy production and stabilize the electrical grid. One key strategy proposed by the scientific community to address the sustainability issues of current vanadium technology is the replacement of metallic species with organic redox molecules. While substantial efforts have focused on molecular engineering to optimize the properties of these active species, the critical role of the supporting electrolyte has been overlooked and neglected. This review highlights the importance of the supporting electrolyte, comprising the solvent and salt, in influencing the performance of organic RFBs. In particular, computational and experimental studies reporting and elucidating the interactions between supporting electrolytes and organic redox species are thoroughly analysed here. These interactions have been shown to significantly enhance battery performance by shifting the redox potential, increasing solubility, and improving stability of the active molecules. Additionally, the importance of the proper selection of counterions and its role in modulating these effects is analysed. Finally, the review outlines key challenges and provides future research directions to deepen the understanding of electrolyte effects on organic RFB performance, emphasizing the need for interdisciplinary approaches to achieve stable, efficient, and commercially viable organic redox flow batteries., The authors acknowledge the financial support from the Spanish Government (Grant Nos. PID2021-124974OB-C21 and TED2021-129378 Bsingle bondC22) as well as the European Innovation Council through the MeBattery project (No. 101046742) and the European Research Council (ERC) through the 3-Phase-BAT project (No. 101213311) and MFreeB project (No. 726217)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Mitigating capacity fading in aqueous organic redox flow batteries through a simple electrochemical charge balancing protocol

  • Páez, Teresa
  • Martínez Cuezva, Alberto
  • Marcilla, Rebeca
  • Palma, Jesús
  • Ventosa Arbaizar, Edgar
Aqueous organic redox flow batteries (AORFBs) have recently been attracting much attention due to their potential utilization as a sustainable solution for stationary energy storage. However, AORFBs have still to face various challenges to become a competitive technology to other mature redox flow batteries. Fading of the energy storage capacity upon cycling leading to insufficient lifetime is likely the most pressing issue. Several processes are contributing to this issue. Among the capacity fading promoters, the existence of side reactions such as water splitting and reactions related to oxygen reduction triggers an imbalanced state of charge for the catholyte and anolyte. Herein, a simple electrochemical balancing procedure is proposed and successfully demonstrated through the restoration of the oxidation states of the two half-cell solutions. The results reveal that it is possible to mitigate and even revert the effects of such side reactions, developing a useful method for mitigating the capacity fading and prolonging the cycling performance of AORFBs. In the two case studies, the implementation of this simple charging procedure leads to a remarkable 20-fold reduction of capacity fading (% h−1). The protocol is a general approach for redox flow batteries, easily implementable and inexpensive., European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 726217). The results reflect only the authors' view and the Agency is not responsible for any use that may be made of the information they contain. The authors also acknowledge the financial support by the Spanish Government through the Research Challenges Programme (Grant RTI2018-099228-A-I00). E.V. thanks the MINECO for the financial support (RYC2018-026086-I). A.M.-C. thanks the MINECO for the financial support (RYC2017-22700).