Pasar al contenido principal

BATERIAS INJECTABLES DE ELECTRODES SEMI-SOLIDOS

RTI2018-099228-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION IMDEA ENERGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Injectable Battery. A Conceptually New Strategy in Pursue of a Sustainable and Circular Battery Model

  • Pérez Antolín, Daniel
  • Trócoli, Rafael
  • Palma, Jesús
  • Ventosa, Édgar
Energy storage is being long accepted to play a key role in achieving a sustainable and environmentally-friendly energy and transportation model. Among the various energy storage systems, batteries are attracting increasing attention since they offer a good compromise of energy efficiency, energy density and cost. However, the sus-tainability of an environmentally-friendly model based on batteries is under debate since the recycling processes are costly and energy-demanding. Herein, the injectable battery, in which cathode and anode electrodes are not fixed on a current collector, is for the first time proposed as an innovative concept to facilitate the recycling process and reuse the battery cells. Battery crushing during recycling is not needed for the injectable batteries since battery cells are reused, which leads to significant reduction in number of steps, products, energy and thus battery costs. The proof-of-concept for the envisioned strategy is shown for aqueous injectable batteries (standard and super-concentrated electrolytes Zn – LiFePO4 and LiTi2(PO4)3– LiFePO4), as well as its plausibility for non- aqueous injectable battery (Li – LiFePO4). This new battery concept is expected to be of special interest for future emerging aqueous battery chemistries with low cost of active materials with respect to inactive ones., The authors acknowledge the financial support by the Spanish Government through the Research Challenges Programme (Grant RTI2018-099228-A-I00) as well as the Comunidad de Madrid through the Talent Attraction programme (2017-T1/AMB-5190). E.V. thanks the MINECO for the financial support (RYC2018-026086-I)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Mitigating capacity fading in aqueous organic redox flow batteries through a simple electrochemical charge balancing protocol

  • Páez, Teresa
  • Martínez Cuezva, Alberto
  • Marcilla, Rebeca
  • Palma, Jesús
  • Ventosa Arbaizar, Edgar
Aqueous organic redox flow batteries (AORFBs) have recently been attracting much attention due to their potential utilization as a sustainable solution for stationary energy storage. However, AORFBs have still to face various challenges to become a competitive technology to other mature redox flow batteries. Fading of the energy storage capacity upon cycling leading to insufficient lifetime is likely the most pressing issue. Several processes are contributing to this issue. Among the capacity fading promoters, the existence of side reactions such as water splitting and reactions related to oxygen reduction triggers an imbalanced state of charge for the catholyte and anolyte. Herein, a simple electrochemical balancing procedure is proposed and successfully demonstrated through the restoration of the oxidation states of the two half-cell solutions. The results reveal that it is possible to mitigate and even revert the effects of such side reactions, developing a useful method for mitigating the capacity fading and prolonging the cycling performance of AORFBs. In the two case studies, the implementation of this simple charging procedure leads to a remarkable 20-fold reduction of capacity fading (% h−1). The protocol is a general approach for redox flow batteries, easily implementable and inexpensive., European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 726217). The results reflect only the authors' view and the Agency is not responsible for any use that may be made of the information they contain. The authors also acknowledge the financial support by the Spanish Government through the Research Challenges Programme (Grant RTI2018-099228-A-I00). E.V. thanks the MINECO for the financial support (RYC2018-026086-I). A.M.-C. thanks the MINECO for the financial support (RYC2017-22700).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

The Redox‐Mediated Nickel–Metal Hydride Flow Battery

  • Páez, Teresa
  • Zhang, FeiFei
  • Lubian, Lara
  • Xi, Shibo
  • Wang, Qing
  • Palma, Jesús
  • Muñoz Torres, Miguel Ángel
  • Sanz Díez, Roberto
  • Ventosa Arbaizar, Edgar
Each battery technology possesses intrinsic advantages and disadvantages, e.g., nickel–metal hydride (MH) batteries offer relatively high specific energy and power as well as safety, making them the power of choice for hybrid electric vehicles, whereas aqueous organic flow batteries (AORFBs) offer sustainability, simple replacement of their active materials and independent scalability of energy and power, making them very attractive for stationary energy storage. Herein, a new battery technology that merges the above mentioned battery technologies through the use of redox-mediated reactions is proposed that intrinsically possesses the main features of each separate technology, e.g., high energy density of the solid active materials, easy recyclability, and independent scalability of energy and power. To achieve this, Ni(OH)2 and MHs are confined in the positive and negative reservoirs of an AORFB that employs alkaline solutions of potassium ferrocyanide and a mixture of 2,6-dihydroxyanthraquinone and 7,8-dihydroxyphenazine-2-sulfonic acid as catholyte and anolyte, respectively. An energy density of 128 Wh L–1 is achieved based on the capacity of the reservoirs leaving ample room for improvement up to the theoretical limit of 378 Wh L–1. This new battery technology opens up new market opportunities never before envisaged, for redox flow batteries, e.g., domestic energy storage and heavy-duty vehicle transportation., Spanish Government through the Research Challenges Programme (Grant No. RTI2018-099228-A-I00). E.V. thanks the MINECO for the financial support (RYC2018-026086-I).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Mediated Alkaline Flow Batteries: From Fundamentals to Application

  • Páez, Teresa
  • Martínez Cuezva, Alberto
  • Palma, Jesús
  • Ventosa Arbaizar, Edgar
Alkaline flow batteries are attracting increasing attention for stationary energy storage. Very promising candidates have been proposed as active species for the negative compartment, while potassium ferrocyanide (K4Fe(CN)6) has been the only choice for the positive one. The energy density of this family of batteries is limited by the low solubility of K4Fe(CN)6 in alkaline media. Herein, we propose a general strategy to increase the energy density of this family of alkaline flow batteries by storing energy in commercial Ni(OH)2 electrodes confined in the positive reservoir. In this way, K4Fe(CN)6 dissolved in the electrolyte acts not only as electroactive species but also as charge carrier between current collector and solid Ni(OH)2 particles located in an external reservoir. A storage capacities of 29 Ah L–1 for the positive compartment is demonstrated. The concept is implemented in three systems, Zn–K4Fe(CN)6, anthraquinone–K4Fe(CN)6, and phenazine–K4Fe(CN)6 alkaline flow battery, showing the versatility of the strategy. Challenges and future directions to exceed the 16 Wh Ltotal–1 demonstrated in this work are discussed., Comunidad de Madrid in the Framework of the Talent Attraction Programme (Grant 2017-T1/AMB-5190) and the Spanish Ministry of Science, Innovation and Universities in the Framework of the Research Challenges Programme (Grant RTI2018-099228-A-I00) is gratefully acknowledged. A.M.-C. thanks Ministerio de Ciencia, Innovación y Universidades for a Ramon y Cajal contract and funding (Grant RYC-2017-22700).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Al-Ion Battery Based on Semisolid Electrodes for Higher Specific Energy and Lower Cost

  • Muñoz-Torrero, David
  • Palma, Jesús
  • Marcilla, Rebeca
  • Ventosa Arbaizar, Edgar
Rechargeable aluminum-ion batteries (AIBs) have been intensively studied over past years. However, its commercialization is still hindered by the relatively high capital cost. Increasing the specific areal capacity (mAh cm–2) by using a high mass loading of active material in thick electrodes is an effective strategy to decrease the battery cost. Unfortunately, the high viscosity and low ionic conductivity of the ionic liquid electrolytes prevent implementation of this strategy. Herein, the use of semisolid electrodes in AIBs is for the first time proposed to (i) address the poor wettability related to high viscosity and (ii) increase mass transport through thick electrodes limited by the low ionic conductivity. Indeed, specific areal capacities of up 7 mAh cm–2 are achieved in this work, compared to 0.5–1.5 mAh cm–2 as state-of-the-art. This innovative concept is potentially implementable to advanced material designs to achieve improved battery performance in the future., Spanish Government (MINECO) through the Research Challenges Programme (Grant RTI2018-099228-A-I00) as well as the Comunidad de Madrid through the Talent Attraction programme (2017-T1/AMB-5190).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

New Technique for Probing the Protecting Character of the Solid Electrolyte Interphase as a Critical but Elusive Property for Pursuing Long Cycle Life Lithium-Ion Batteries

  • García-Quismondo, Enrique
  • Alvarez-Conde, Sandra
  • García, Guzmán
  • Medina-Santos, Jesús I.
  • Palma, Jesús
  • Ventosa Arbaizar, Edgar
The formation of a protecting nanolayer, so-called solid electrolyte interphase (SEI), on the negative electrode of Li-ion batteries (LIBs) from product precipitation of the cathodic decomposition of the electrolyte is a blessing since the electrically insulating nature of this nanolayer protects the electrode surface, preventing continuous electrolyte decomposition and enabling the large nominal cell voltage of LIBs, e.g., 3.3−3.8 V. Thus, the protection performance of the nanolayer SEI is essential for LIBs to achieve a long cycle life. Unfortunately, the evaluation of this critical property of the SEI is not trivial. Herein, a new, cheap, and easily implementable methodology, the redox-mediated enhanced coulometry, is presented to estimate the protecting quality of the SEI. The key element of the methodology is the addition of a redox mediator in the electrolyte during the degassing step (after the SEI formation cycle). The redox mediator leads to an internal self-discharge process that is inversely proportional to the protecting character of the SEI. Also, the self-discharge process results in an easily measurable decrease in Coulombic efficiency. The influence of vinylene carbonate as an electrolyte additive in the resulting SEI is used as a case study to showcase the potential of the proposed methodology., The author acknowledges the financial support from the Spanish Government (MINECO) through the Research Challenges Programme (Grant RTI2018-099228-A-I00) and Ramón y Cajal award (RYC2018-026086-I) as well as the NanoBat project. NanoBat has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement no. 861962.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Semi‐solid flow battery and redox-mediated flow battery: two strategies to implement the use of solid electroactive materials in high-energy redox-flow batteries

  • Ventosa Arbaizar, Edgar
Implementing the use of solid electroactive materials in redox-flow battery (RFB) configuration is an appealing challenge since the resulting battery technologies benefit from the high energy density of solid materials and the independent scalability of energy and power of RFB configuration. In recent years, two different strategies have emerged to achieve this goal: i) the semi-solid flow batteries and ii) the redox-mediated flow batteries, also referred to as redox targeting or solid booster, each battery type having intrinsic advantages and disadvantages. In this perspective review, recent progress addressing critical factors for each technology is revised. In particular, chemical engineering aspects are of vital importance for further improvement and practical deployment of these two technologies., The author acknowledges the financial support from “la Caixa” Foundation, under Agreement LCF/PR/PR18/51130007” and the Spanish Government through the Research Challenges Programme (Grant RTI2018-099228-A-I00). E.V. thanks the Ministry of Science, Innovation and Universities (MINECO) for the financial support (RYC2018-026086-I).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Semi-flowable Zn semi-solid electrodes as renewable energy carrier for refillable Zn–Air batteries

  • Perez Antolin, Daniel
  • Schuhmann, Wolfgang
  • Palma, Jesús
  • Ventosa Arbaizar, Edgar
Today’s society relies on energy storage on a day-to-day basis, e.g. match energy production and demand from renewable sources, power a variety of electronics, and enable emerging technologies. As a result, a vast range of energy storage technologies has emerged in the last decades. Among them, rechargeable Zn–Air batteries have held great promises for a long time. However, the severe challenges related to the reversible O2 reactions and poor cyclability at the positive and negative electrodes, respectively, have severely hindered the success of this technology. Herein, electrically-conducting and semi-flowable Zn semi-solid electrodes are proposed to revive the appealing concept of a mechanically–rechargeable alkaline Zn–Air battery, in which the spent negative electrodes are easily substituted at the end of the discharge process (refillable primary battery). In this proof-of-concept study energy densities of ca. 1500 Wh L− 1 (1350 Ah L− 1 electrode and utilization rate of 85%) are achieved thanks to the compromised flowability of the proposed Zn semi-solid electrodes. In this way, semi-solid Zn electrodes become a type of green energy carrier having intrinsic advantages over gas and liquid fuels. Zn semi-flowable electrode can be generated elsewhere using renewable sources, easily stored, transported, and used to produce electricity., The project leading to these results has received funding from “la Caixa” Foundation, under agreement LCF/PR/PR18/51130007” and the Spanish Government through the Research Challenges Programme (Grant RTI2018-099228-A-I00). E.V. thanks the MINECO for the financial support (RYC2018-026086-I).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Regenerative electrochemical ion pumping cell based on semi-solid electrodes for sustainable Li recovery

  • Perez Antolin, Daniel
  • Irastorza, Cristina
  • González, Sara
  • Moreno, Rebeca
  • García-Quismondo, Enrique
  • Palma, Jesús
  • Lado, Julio J.
  • Ventosa Arbaizar, Edgar
Demand of lithium is expected to increase drastically in coming years driven by the market penetration of electric vehicles powered by Li-ion batteries, which will require faster and more efficient Li extraction technologies than conventional ones (evaporation in brines). The Electrochemical Ion Pumping Cell (EIPC) technology based on the use of Faradaic materials is one of the most promising approaches. However, its relatively short lifespan prevents its commercial deployment. Herein, a new EIPC concept based on the use of semi-solid electrodes is proposed for the first time, which takes advantage of the rheological characteristics of semi-solid electrodes that enable simple and cheap regeneration of the Regenerative Electrochemical Ion Pumping Cell (REIPC) systems after reaching its end-of-life. A proof-of-concept for REIPC is accomplished by simple replacement of the semi-solid electrode demonstrating a remarkable electrochemical performance (e.g. 99.87%cycle− 1 , 99.98%h− 1 , 3–4 mAh cm− 2 ) along with a competitive ion separation (e.g. 16.2 mgLi⋅gNiHCF− 1 , 4 gLi m− 2 and 15.6 Wh⋅mol− 1 ). The use of semisolid electrode offers other unique features such as a significant cost reduction of 95% for every regeneration regarding conventional EIPC, proving that REIPC concept successfully addresses the issues associated to the sustainability and recyclability of the conventional EIPC's for lithium capturing., J.J. Lado acknowledges Comunidad de Madrid for the postdoctoral fellowship as part of the Young Talent Attraction Program (2020-T1/ AMB-19799). E. Ventosa acknowledges the financial support by the Spanish Government through the Research Challenges Programme (Grant RTI2018- 099228-A-I00), Ramon y Cajal Programme (RYC2018-026086-I) as well as “la Caixa” Foundation (LCF/PR/PR18/51130007).