Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

About how to capture and exploit the CO2 surplus that nature, per se, is not capable of fixing

  • Godoy, Manuel S.
  • Mongili, Beatrice
  • Fino, Debora
  • Prieto, María Auxiliadora
10 p.-2 fig., Human activity has been altering many ecological cycles for decades, disturbing the natural mechanisms which are responsible for re-establishing the normal environmental balances. Probably, the most disrupted of these cycles is the cycle of carbon. In this context, many technologies have been developed for an efficient CO2 removal from the atmosphere. Once captured, it could be stored in large geological formations and other reservoirs like oceans. This strategy could present some environmental and economic problems. Alternately, CO2 can be transformed into carbonates or different added-value products, such as biofuels and bioplastics, recycling CO2 from fossil fuel. Currently different methods are being studied in this field. We classified them into biological, inorganic and hybrid systems for CO2 transformation. To be environmentally compatible, they should be powered by renewable energy sources. Although hybrid systems are still incipient technologies, they have made great advances in the recent years. In this scenario, biotechnology is the spearhead of ambitious strategies to capture CO2 and reduce global warming., Research on polymer biotechnology at the laboratory of Auxiliadora Prieto is supported by grants from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreements, no 633962, no. 679050, no. 745791 and no. 745737. We also acknowledge the Community of Madrid (P2013/MIT2807) and the Spanish Ministry of Economy (BIO2013-44878R, BIO2014- 61515-EXP)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

When microbial biotechnology meets material engineering

  • Hernández-Arriaga, A.M.
  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
15 p.-3 fig.-1 tab., Bacterial biopolymers such as bacterial cellulose (BC), alginate or polyhydroxyalkanotes (PHAs) have aroused the interest of researchers in many fields, for instance biomedicine and packaging, due to their being biodegradable, biocompatible and renewable. Their properties can easily be tuned by means of microbial biotechnology strategies combined with materials science. This provides them with highly diverse properties, conferring them non-native features. Herein we highlight the enormous structural diversity of these macromolecules, how are they produced, as well as their wide range of potential applications in our daily lives. The emergence of new technologies, such as synthetic biology, enables the creation of next-generation-advanced materials presenting smart functional properties, for example the ability to sense and respond to stimuli as well as the capacity for self-repair. All this has given rise to the recent emergence of biohybrid materials, in which a synthetic component is brought to life with living organisms. Two different subfields have recently garnered particular attention: hybrid living materials (HLMs), such as encapsulation or bioprinting, and engineered living materials (ELMs), in which the material is created bottom-up with the use of microbial biotechnology tools. Early studies showed the strong potential of alginate and PHAs as HLMs, whilst BC constituted the most currently promising material for the creation of ELMs., Research on polymer biotechnology at the lab of Auxi Prieto is supported by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreements no. 745737 (Afterlife), no. 760994 (Engicoin),no. 870294 (Mix-Up), no. 814418 (SinFonia) and no. 101000733 (Promicon). At National level, the lab is supported by grants from the Community of Madrid (P2018/NMT4389), the Spanish Ministry of Science and Innovation under research grants BIOCIR (PID2020-112766RB-C21), REVOLUZION (PLEC2021-008188) and the Juan de la Cierva aid of Cristina Campano (FJC2019-040298-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of poly(3-hydroxybutyrate)/poly(lactic acid) from industrial wastewater by wild-type Cupriavidus necator H16

  • Hernández, Natalia
  • Rivero-Buceta, Virginia
  • Pardo, Isabel
  • Prieto, María Auxiliadora
14 p.-10 fig.-5 tab., The massive production of urban and industrial wastes has created a clear need for alternative waste management processes. One of the more promising strategies is to use waste as raw material for the production of biopolymers such as polyhydroxyalkanoates (PHAs). In this work, a lactate-enriched stream obtained by anaerobic digestion (AD) of wastewater (WW) from a candy production plant was used as a feedstock for PHA production in wild-type Cupriavidus necator H16. Unexpectedly, we observed the accumulation of poly(3-hydroxybutyrate)/poly(lactic acid) (P(3HB)/PLA), suggesting that the non-engineered strain already possesses the metabolic potential to produce these polymers of interest. The systematic study of factors, such as incubation time, nitrogen and lactate concentration, influencing the synthesis of P(3HB)/PLA allowed the production of a panel of polymers in a resting cell system with tailored lactic acid (LA) content according to the GC–MS of the biomass. Further biomass extraction suggested the presence of methanol soluble low molecular weight molecules containing LA, while 1 % LA could be detected in the purified polymer fraction. These results suggested that the cells are producing a blend of polymers. A proteomic analysis of C. necator resting cells under P(3HB)/PLA production conditions provides new insights into the latent pathways involved in this process. This study is a proof of concept demonstrating that LA can polymerize in a non-modified organism and paves the way for new metabolic engineering approaches for lactic acid polymer production in the model bacterium C. necator H16., This work has been supported by the AFTERLIFE project which has received funding from the Bio-Based Industries Joint Undertaking under the European Union's Horizon 2020 research and innovation program under grant agreement No. 745737. This work also received financial support from the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020–112766RB-C21), funded by MCIN/ AEI/10.13039/501100011033/ and by ERDF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible feeding strategy for high-yield PHA bioprocessing in Cupriavidus necator H16 from anaerobically fermented industrial wastewater

  • Hernández, Natalia
  • Rodríguez, Alberto
  • Rivero-Buceta, Virginia
  • Rojas, Antonia
  • Prieto, María Auxiliadora
10 p.-4 fig.-3 tab.-1 graph. abst., Polyhydroxyalkanoates (PHAs) are promising bioplastics. Their cost-effective production might be possible through waste valorisation. This study explores agro-industrial wastewater converted into organic acids by anaerobic acidification as a substrate for PHA biosynthesis by Cupriavidus necator H16. A tailored fed-batch strategy mitigated organic acids toxicity by aligning feed timing with biomass growth and carbon source uptake. This approach enabled PHA accumulation with a final biomass of 19 g/L and 85 % polymer content. This is the highest level of polymer production reported for wild-type C. necator on such complex substrates. The operational mode significantly influenced the properties of the polymer, reducing the polydispersity index from 5.6 to 2.2 and increasing the molecular weight from 3.6 to 5.6 kDa, enhancing the polymer's thermal performance with a melting point of 176 °C. These findings emphasise the importance of feeding strategies in both bioprocess efficiency and PHA properties, providing valuable insights for the production of bioplastics on an industrial scale., This research received funding from the Bio-based Industries Joint Undertaking (JU) under the European Horizon 2020 research and innovation programme under grant agreement No. 745737 (Afterlife). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics Towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science, Innovation and Universities under the research grant BIOCIR (PID2020-112766RB-C21) and OPENVIRO (PID2023-1465570B-C21)., Peer reviewed