Pasar al contenido principal

REVALORIZACION DE RESIDUOS DIRIGIDA HACIA LA CIRCULARIDAD DE LOS BIOPLASTICOS: SINTESIS, DEGRADACION, RECICLADO Y DIVERSIFICACION DE LOS POLIESTERES BACTERIANOS (BIOCIR)

PID2020-112766RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Order matters: Methods for extracting cellulose from rice straw by coupling alkaline, ozone and enzymatic treatments

  • Cabrera-Villamizar, Laura Andrea
  • Ebrahimi, Mahrokh
  • Martínez-Abad, Antonio
  • Talens-Perales, David
  • López-Rubio, Amparo
  • Fabra, Maria José
[EN] Rice straw is a widely produced residue that can be converted into value-added products. This work aimed at using greener processes combining mild alkali (A), ozone (O) and enzymatic (engineered xylanase) (E) treatments to extract cellulose and other value-added compounds from rice straw and to evaluate the effects of the order of the treatments. Solid (S) and liquid (L) fractions from the process were collected for physicochemical characterization. AOE treatment showed the best capacity to extract high purity cellulose and other valuable compounds. The lignin content was significantly decreased independently of the order of the treatments and, its content in the extract obtained after the AOE process was lower than the one obtained after the OAE process. Moreover, thermal stability of the samples increased after the enzymatic process, being higher in SAOE. The alkaline treatment increased the hemicellulose and polyphenol content (antioxidant activity) in the liquid fractions (LA and LOA). In contrast, the ozonized liquid fractions had lower polyphenol content. Therefore, alkali was fundamental in the process. In conclusion, the AOE strategy could be a more environmentally friendly method for extracting cellulose and other valuable compounds, which could be used to develop active materials in the future., Grant PID2020-112766RB-C21 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGe- nerationEU/PRTR". Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged. Julio Polaina and Maria Castanedo are acknowledged for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition

  • Cabrera-Villamizar, Laura
  • Campano, Cristina
  • López Rubio, Amparo
  • Fabra, Maria José
  • Prieto, M. Auxiliadora
[EN] This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged. The authors would like to thank Jose Maria Coll for his help in processing the confocal laser scanning microscopy images.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

When microbial biotechnology meets material engineering

  • Hernández-Arriaga, A.M.
  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
15 p.-3 fig.-1 tab., Bacterial biopolymers such as bacterial cellulose (BC), alginate or polyhydroxyalkanotes (PHAs) have aroused the interest of researchers in many fields, for instance biomedicine and packaging, due to their being biodegradable, biocompatible and renewable. Their properties can easily be tuned by means of microbial biotechnology strategies combined with materials science. This provides them with highly diverse properties, conferring them non-native features. Herein we highlight the enormous structural diversity of these macromolecules, how are they produced, as well as their wide range of potential applications in our daily lives. The emergence of new technologies, such as synthetic biology, enables the creation of next-generation-advanced materials presenting smart functional properties, for example the ability to sense and respond to stimuli as well as the capacity for self-repair. All this has given rise to the recent emergence of biohybrid materials, in which a synthetic component is brought to life with living organisms. Two different subfields have recently garnered particular attention: hybrid living materials (HLMs), such as encapsulation or bioprinting, and engineered living materials (ELMs), in which the material is created bottom-up with the use of microbial biotechnology tools. Early studies showed the strong potential of alginate and PHAs as HLMs, whilst BC constituted the most currently promising material for the creation of ELMs., Research on polymer biotechnology at the lab of Auxi Prieto is supported by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreements no. 745737 (Afterlife), no. 760994 (Engicoin),no. 870294 (Mix-Up), no. 814418 (SinFonia) and no. 101000733 (Promicon). At National level, the lab is supported by grants from the Community of Madrid (P2018/NMT4389), the Spanish Ministry of Science and Innovation under research grants BIOCIR (PID2020-112766RB-C21), REVOLUZION (PLEC2021-008188) and the Juan de la Cierva aid of Cristina Campano (FJC2019-040298-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gaining control of bacterial cellulose colonization by polyhydroxyalkanoate-producing microorganisms to develop bioplasticized ultrathin films

  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Fabra, María José
  • Prieto, María Auxiliadora
Synergistic methodological strategies based on the fields of microbial biotechnology and materials science open up an enormous range of possibilities for the sustainable production of advanced materials with predictable properties. This study shows how naturally produced polyhydroxyalkanoate (PHA) particles are introduced into bacterial cellulose (BC) driven by their bacterial producers. Thanks to an extensive knowledge of the internal structure of BC, it was possible to control the colonization process, i.e. loading and localization of PHA. A subsequent acid treatment favored the PHA-BC bonding at the position reached by the bacteria. These biodegradable films showed improved mechanical and barrier properties even with respect to reference plastic films 8 times thicker, reaching a Young's modulus 4.25 times higher and an oxygen permeability 3 times lower than those of polyethylene terephthalate (PET) films. Owing to the versatility of the method, a wide variety of materials can be developed for very diverse fields of application., Authors want to acknowledge the European Union's Horizon 2020 Research and Innovation Program under the grant agreement no. 870294 (Mix-Up). Authors also received financial support from the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), and the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21), DECOMPACK (PID2020-112766RB-C22) and the Juan de la Cierva aid of Cristina Campano (FJC2019-040298-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Producción de la bacteria depredadora B. bacteriovorus HD100 en biorreactor: del laboratorio a la industria

  • Salgado-Briegas, Sergio
  • Prieto, María Auxiliadora
1 p., La bacteria depredadora Bdellovibrio bacteriovorus ha despertado gran interés en los últimos años debido a su potencial uso como antibiótico vivo, ya que puede lisar otras bacterias Gram negativas incluyendo patógenos humanos. Su ciclo de vida está compuesto por una fase libre móvil o de ataque, en la que nada a gran velocidad hasta localizar a la presa, y una fase intraperiplásmica o de crecimiento, en la que consume los componentes celulares de la presa como paso previo a la lisis de ésta y liberación de la progenie. Además,en nuestro laboratorio se ha puesto de manifiesto la aplicación de B. bacteriovorus en el campo industrial para la purificación de productos intracelulares como los bioplásticos. Para llevar a cabo el procesado de bioproductos a escala industrial es necesario disponer de biomasa suficiente del depredador. En este trabajo,presentamos la optimización de la producción de B. bacteriovorus en biorreactores con un volumen de cultivo de 1 litro, empleando diferentes modos de operación y concentración de bacteria presa. La tasa de crecimiento y la biomasa final de B. bacteriovorus fueron los parámetros de optimización del escalado.Debido a la complejidad que dicha bacteria presenta para el seguimiento de su crecimiento, en este proceso se ha empleado una cepa modificada del depredador que es fluorescente y que permite la monitorización del número de células viables mediante citometría de flujo. Por último, con el fin de facilitar su conservación,transporte y comercialización, se ha puesto a punto un proceso de liofilización en diferentes condiciones., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzybiotic-mediated antimicrobial functionalization of polyhydroxyalkanoate nanoparticles

  • Blanco Parte, Francisco German
  • Vázquez, Roberto
  • Hernández-Arriaga, A.M.
  • García González, Pedro
  • Prieto, María Auxiliadora
22 p.-5 fig.-1 tab., Background: Increasing antibiotic resistance is depleting the available arsenal of these conventional antimicrobials, thus making the development of alternative antibacterial agents a priority for biomedical research. This is the case for Streptococcus penumoniae, a severe respiratory pathogen which, upon colonization of the lung alveoli below the lung surfactant layer (LS), causes community-acquired pneumonia. One of the alternative approaches is the use of enzybiotics, phage-encoded peptidoglycan hydrolases that degrade the bacterial cell wall, thus leading to their death by osmotic shock. To meet therapeutic parameters such as longer in vivo half-life or targeted activity release, the design of enzybiotic formulations is required. Polyhydroxyalkanoates (PHAs) nanoparticles (NPs), present some ideal properties as biomedical nanocarriers such as their inherent biocompatibility, biodegradability, and ability to be vehiculized through hydrophobic barriers, including the lung surfactant (LS). Here, we develop PHA NPs as a platform for the immobilization of enzybiotics against S. pneumoniae via a minimal PHA affinity tag., Results In this study, we tagged the Cpl-711 enzybiotic, which specifically targets S. pneumoniae, with the minimal PHA affinity peptide MinP, resulting in the M711 protein. Then, a PHA nanoparticulate suspension with adequate physicochemical properties for pulmonary delivery was formulated, and M711 was immobilized on their surface. Finally, we assessed the antipneumococcal activity of the nanosystem against planktonic and sessile forms of the pathogen. The resulting pioneer nanosystem displayed sustained antimicrobial activity against free cells, and effectively disaggregated S. pneumoniae biofilms., Conclusions Our findings indicate tag-mediated immobilization of enzybiotics as an effective method for the antimicrobial functionalization of PHA NPs. This straightforward approach may be extrapolated to other enzybiotics (or cargo proteins) with other specificities, highlighting the versatility of the system., The authors want to acknowledge the European Union's Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up). The authors also received financial support from the CSIC Page 14/22 Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTISusplast+),and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). Francisco G. Blanco is a recipient of (PRE-2018-083859)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzybiotic-mediated antimicrobial functionalization of polyhydroxyalkanoates

  • Blanco Parte, Francisco German
  • Vázquez, Roberto
  • Hernández-Arriaga, A.M.
  • García González, Pedro
  • Prieto, María Auxiliadora
11 p.-6 fig.-1 tab., Polymeric nanoparticles (NPs) present some ideal properties as biomedical nanocarriers for targeted drug delivery such as enhanced translocation through body barriers. Biopolymers, such as polyhydroxyalkanoates (PHAs) are gaining attention as nanocarrier biomaterials due to their inherent biocompatibility, biodegradability, and ability to be vehiculized through hydrophobic media, such as the lung surfactant (LS). Upon colonization of the lung alveoli, below the LS layer, Streptococcus pneumoniae, causes community-acquired pneumonia, a severe respiratory condition. In this work, we convert PHA NPs into an antimicrobial material by the immobilization of an enzybiotic, an antimicrobial enzyme, via a minimal PHA affinity tag. We first produced the fusion protein M711, comprising the minimized PHA affinity tag, MinP, and the enzybiotic Cpl-711, which specifically targets S. pneumoniae. Then, a PHA nanoparticulate suspension with adequate physicochemical properties for pulmonary delivery was formulated, and NPs were decorated with M711. Finally, we assessed the antipneumococcal activity of the nanosystem against planktonic and biofilm forms of S. pneumoniae. The resulting system displayed sustained antimicrobial activity against both, free and sessile cells, confirming that tag-mediated immobilization of enzybiotics on PHAs is a promising platform for bioactive antimicrobial functionalization., The authors received financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up), the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). FB is a recipient of (PREQ13 2018-083859)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nature-inspired material binding peptides with versatile polyester affinities and binding strengths

  • Blanco Parte, Francisco German
  • Machatschek, Rainhard
  • Keller, Manuela
  • Hernández-Arriaga, A.M.
  • Godoy, Manuel S.
  • Tarazona, Natalia A.
  • Prieto, María Auxiliadora
14 p.-6 fig.-4 tab., Biodegradable polyesters, such as polyhydroxyalkanoates (PHAs), are having a tremendous impact on biomedicine. However, these polymers lack functional moieties to impart functions like targeted delivery of molecules. Inspired by native GAPs, such as phasins and their polymer-binding and surfactant properties, we generated small material binding peptides (MBPs) for polyester surface functionalization using a rational approach based on amphiphilicity. Here, two peptides of 48 amino acids derived from phasins PhaF and PhaI from Pseudomonas putida, MinP and the novel-designed MinI, were assessed for their binding towards two types of PHAs, PHB and PHOH. In vivo, fluorescence studies revealed selective binding towards PHOH, whilst in vitro binding experiments using the Langmuir-Blodgett technique coupled to ellipsometry showed KD in the range of nM for all polymers and MBPs. Marked morphological changes of the polymer surface upon peptide adsorption were shown by BAM and AFM for PHOH. Moreover, both MBPs were successfully used to immobilize cargo proteins on the polymer surfaces. Altogether, this work shows that by redesigning the amphiphilicity of phasins, a high affinity but lower specificity to polyesters can be achieved in vitro. Furthermore, the MBPs demonstrated binding to PET, showing potential to bind cargo molecules also to synthetic polyesters., This work was financially supported by the European Unio n's Horizon 2020 Research and Innovation Program, grant agreement no. 870294 ( Mix -Up). The authors also received financial support from the CSIC Interdisciplinary Thematic Platform ( PTI+) Sustainable Plastics towards a Circular Economy (PTI -Susplast+), and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). This work was financially supported by the Helmhotlz Association through program-oriented funding . Francisco G . Blanco is the recipient of a predoctoral grant from the State Program for the Promotion of Talent and Its Employability in R & D & I (PRE-2018-083859) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heterologous constitutive production of short-chain-length polyhydroxyalkanoates in Pseudomonas putida KT2440: the involvement of IbpA inclusion body protein

  • Manoli, Maria-Tsampika
  • Blanco Parte, Francisco German
  • Rivero-Buceta, Virginia
  • Kniewel, Ryan
  • Herrera Alarcón, Sandra
  • Salgado-Briegas, Sergio
  • Prieto, María Auxiliadora
18 p.-6 fig.-5 tab., Designing cell factories for the production of novel polyhydroxyalkanoates (PHAs) via smart metabolic engineering is key to obtain à la carte materials with tailored physicochemical properties. To this end, we used the model medium-chain-length-PHA producing bacterium, P. putida KT2440 as a chassis, which is characterized by its metabolic versatility and stress tolerance. Different PHA biosynthetic modules were assembled in expression plasmids using the Golden gate/MoClo modular assembly technique to implement an orthogonal short-chain-lengh-PHA (scl-PHA) switch in a “deaf” PHA mutant. This was specifically constructed to override endogenous multilevel regulation of PHA synthesis in the native strain. We generated a panel of engineered approaches carrying the genes from Rhodospirillum rubrum, Cupriavidus necator and Pseudomonas pseudoalcaligenes, demonstrating that diverse scl-PHAs can be constitutively produced in the chassis strain to varying yields from 23% to 84% PHA/CDW. Co-feeding assays of the most promising engineered strain harboring the PHA machinery from C. necator resulted to a panel of PHBV from 0.6% to 19% C5 monomeric incorporation. Chromosomally integrated PHA machineries with high PhaCCn synthase dosage successfully resulted in 68% PHA/CDW production. Interestingly, an inverse relationship between PhaC synthase dosage and granule size distribution was demonstrated in the heterologous host. In this vein, it is proposed the key involvement of inclusion body protein IbpA to the heterologous production of tailored PHA in P. putida KT2440., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 633962 (P4SB), 814418 (SinFonia) and 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID 2020-112766RB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A singular PpaA/AerR-like protein in Rhodospirillum rubrum rules beyond the boundaries of photosynthesis in response to the intracellular redox state

  • Godoy, Manuel S.
  • De Miguel, Santiago R.
  • Prieto, María Auxiliadora
21 p.-8 fig., Photosynthesis (PS) in purple non-Sulfur bacteria (PNSB) is strictly controlled to avoid energy consumption and to prevent oxidative stress when oxygen is present. PpsR, a transcriptional repressor encoded in the photosynthesis gene cluster (PGC), is one of the main players in the regulation of PS-related genes. In some cases, PpsR does not sense the environmental cue by itself but delegates this task to other proteins like PpaA/AerR anti-repressors, which can ultimately affect PpsR affinity to some promoter regions. In this work, the effects of locus Rru_A0625 product (HP1) on PS regulation of Rhodospirillum rubrum were studied by mutation/complementation and transcriptomic strategies. Rru_A0625 is located next to ppsR gene, just like other PpaA/AerR members, and its deletion annuls pigment synthesis in dark micro/anaerobic growth conditions. HP1 shows similarity to PpaA/AerR anti-repressors family, although it does not possess their typical cobalamin binding domain. A transcriptomic analysis of Rru_A0625 deletion mutant showed that HP1 not only has effects on bacteriochlorophyll and carotenoid biosynthesis, but also many other biological processes in the cell. The most notorious is the impact on the transcription of the nitrogenase complex components and accessory proteins. Our results suggest that this new member of the PpaA/AerR family has evolved losing the canonical cobalamin binding domain, but not the redox sensing capability, conserving a not fully understood mechanism of PS regulation., The authors want to acknowledge the financial support from the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics toward a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of poly(3-hydroxybutyrate)/poly(lactic acid) from industrial wastewater by wild-type Cupriavidus necator H16

  • Hernández, Natalia
  • Rivero-Buceta, Virginia
  • Pardo, Isabel
  • Prieto, María Auxiliadora
14 p.-10 fig.-5 tab., The massive production of urban and industrial wastes has created a clear need for alternative waste management processes. One of the more promising strategies is to use waste as raw material for the production of biopolymers such as polyhydroxyalkanoates (PHAs). In this work, a lactate-enriched stream obtained by anaerobic digestion (AD) of wastewater (WW) from a candy production plant was used as a feedstock for PHA production in wild-type Cupriavidus necator H16. Unexpectedly, we observed the accumulation of poly(3-hydroxybutyrate)/poly(lactic acid) (P(3HB)/PLA), suggesting that the non-engineered strain already possesses the metabolic potential to produce these polymers of interest. The systematic study of factors, such as incubation time, nitrogen and lactate concentration, influencing the synthesis of P(3HB)/PLA allowed the production of a panel of polymers in a resting cell system with tailored lactic acid (LA) content according to the GC–MS of the biomass. Further biomass extraction suggested the presence of methanol soluble low molecular weight molecules containing LA, while 1 % LA could be detected in the purified polymer fraction. These results suggested that the cells are producing a blend of polymers. A proteomic analysis of C. necator resting cells under P(3HB)/PLA production conditions provides new insights into the latent pathways involved in this process. This study is a proof of concept demonstrating that LA can polymerize in a non-modified organism and paves the way for new metabolic engineering approaches for lactic acid polymer production in the model bacterium C. necator H16., This work has been supported by the AFTERLIFE project which has received funding from the Bio-Based Industries Joint Undertaking under the European Union's Horizon 2020 research and innovation program under grant agreement No. 745737. This work also received financial support from the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020–112766RB-C21), funded by MCIN/ AEI/10.13039/501100011033/ and by ERDF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aerobic-anaerobic transition boosts poly(3-hydroxybutyrate-co-3-hydroxyvalerate) synthesis in Rhodospirillum rubrum: the key role of carbon dioxide

  • Godoy, Manuel S.
  • De Miguel, Santiago R.
  • Prieto, María Auxiliadora
16 p.-7 fig., Background: Microbially produced bioplastics are specially promising materials since they can be naturally synthesized and degraded, making its end-of-life management more amenable to the environment. A prominent example of these new materials are polyhydroxyalkanoates. These polyesters serve manly as carbon and energy storage and increase the resistance to stress. Their synthesis can also work as an electron sink for the regeneration of oxidized cofactors. In terms of biotechnological applications, the co-polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), or PHBV, has interesting biotechnological properties due to its lower stiffness and fragility compared to the homopolymer poly(3-hydroxybutyrate) (P3HB). In this work, we explored the potentiality of Rhodospirillum rubrum as a producer of this co-polymer, exploiting its metabolic versatility when grown in different aeration conditions and photoheterotrophically, Results: When shaken flasks experiments were carried out with limited aeration using fructose as carbon source, PHBV production was triggered reaching 29 ± 2% CDW of polymer accumulation with a 75 ± 1%mol of 3-hydroxyvalerate (3HV) (condition C2). Propionate and acetate were secreted in this condition. The synthesis of PHBV was exclusively carried out by the PHA synthase PhaC2. Interestingly, transcription of cbbM coding RuBisCO, the key enzyme of the Calvin-Benson-Bassham cycle, was similar in aerobic and microaerobic/anaerobic cultures. The maximal PHBV yield (81% CDW with 86%mol 3HV) was achieved when cells were transferred from aerobic to anaerobic conditions and controlling the CO2 concentration by adding bicarbonate to the culture. In these conditions, the cells behaved like resting cells, since polymer accumulation prevailed over residual biomass formation. In the absence of bicarbonate, cells could not adapt to an anaerobic environment in the studied lapse, Conclusions: We found that two-phase growth (aerobic-anaerobic) significantly improved the previous report of PHBV production in purple nonsulfur bacteria, maximizing the polymer accumulation at the expense of other components of the biomass. The presence of CO2 is key in this process demonstrating the involvement of the Calvin-Benson-Bassham in the adaptation to changes in oxygen availability. These results stand R. rubrum as a promising producer of high-3HV-content PHBV co-polymer from fructose, a PHBV unrelated carbon source., This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI +) Sustainable Plastics towards a Circular Economy (PTI-Susplast +), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). Santiago R. de Miguel is a recipient of a predoctoral FPI grant PRE2021-098281., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A systems biology approach for enhancing the synthesis of functionalyzed polymers in Pseudomonas putida

  • Rodríguez Carreiro, Marina
  • Manoli, Maria-Tsampika
  • Rivero-Buceta, Virginia
  • Durante-Rodríguez, Gonzalo
  • Díaz, Eduardo
  • Nogales, Juan
  • Prieto, María Auxiliadora
1 p., The environmental challenge associated with conventional plastics has created a need for alternative solutions, placing bio-based polymers like polyhydroxyalkanoates (PHAs) in a promising position.These polyesters are produced under nutritional stress conditions by several microorganisms including the model bacterium Pseudomonas putida. Carbon sources for PHA synthesis can be classified into two categories: i) PHA related substrates, primarily fatty acids, which provide high production yields, and ii) non-PHA related substrates, such as sugars, whose conversion into PHA precursors through de novo fatty acid synthesis route has been associated with low production yields [1]. Significant efforts have been devoted for the use of carbohydrates as carbon sources within a circular economy framework. To address this challenge, systems biology approaches, like genomescale metabolic models, offer valuable insights into the metabolic features of PHA cycle in P. putida KT2440 [2]. These approaches enable the prediction of the key reaction to be deleted in order to redirect the metabolic routes of interest, and represent powerful tools for optimizing and enhancing the utilization of non-PHA related carbon sources in a sustainable manner. In order to construct an optimized PHA producer P. putida KT2440 strain when using sugars as feedstock, we employed the iJN1411 genome-scale metabolic model to predict those genes to be deleted for eliminating potential competing pathways and redirecting carbon flux from acetyl-CoA towards PHA biosynthesis [3], and those genes to be added for using sucrose as carbon source. We obtained the engineered MT9 strain which was tested to produce PHA from sucrose. Additionally, the synthesis of the antimicrobial biopolymer PHACOS was explored by co-feeding the chemical precursor 6-acetylthiohexanoic acid (6-ATH) and glucose or sucrose [4]. The results revealed that MT9 cultures grown with sucrose as carbon sources achieved a PHA accumulation of 35% per cell dry weight (CDW) compared to 22% for the WT strain under the same conditions. Moreover, the addition of 6-ATH significantly increased the PHA content, both with sucrose and glucose, to approximately 70% of CDW, revealing the presence of 90% of functionalized 4- and 6- carbons monomers, and providing further evidence for the production of PHACOS., This project receives funding from the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21) and the European Union's Horizon 2020 research and innovation program under grant agreement No. EU 101000733 (PROMICON)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

À la carte synthesis of polyhydroxyalkanoates using Pseudomonas putida: exploiting the possibilities within the synthetic biology

  • De Miguel, Santiago R.
  • Manoli, Maria-Tsampika
  • Godoy, Manuel S.
  • Prieto, María Auxiliadora
1 p., Bio-based materials are a sustainable alternative for the substitution of oil derived plastics. Within this group we can highlight the polyhydroxyalkanoates (PHAs), biodegradable polymers with similar properties to conventional plastics. The physicochemical properties of the PHA can be tuneable and strongly depends on its hydroxyacids’ monomeric composition1. The synthesis of these PHAs is triggered in many bacteria by a complex regulatory network driven by many factors such as the nutritional imbalance, where the cells experience an excess of carbon coupled with a limitation of other nutrients such as nitrogen. In this study we focus on the model bacterium Pseudomonas putida KT2440 for the production of à la carte PHAs due to its versatile metabolism, resistance to stress, and that naturally produces medium-chain-length-PHA. In order to avoid the complexity of the native regulatory system in this chassis, the entire pha operon was deleted generating the P. putida ∆pha strain, named as PP05_01. Using the Golden Gate technology, a battery of synthetic operons was constructed bearing the minimum set of genes needed for tuneable PHA production in PP05_01. For this, we explored a range of enzymatic set scenarios from different microorganisms (i.e. Rhodospirillum rubrum, Cupriavidus necator, P. putida) producing a panel of PHA with different monomer composition. The most promising candidates were expressed in a multicopy system in PP05_01 strain chassis and the amount and composition of PHA synthesized from various substrates was determined. This study provides P. putida optimized cell factories for the production of tailored PHAs., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21. This study is supported by a “Ayudas para contratos predoctorales para la formación de doctores” fellowship (PRE2021-098281) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

À la carte synthesis of polyhydroxyalkanoates using Pseudomonas putida: exploiting the possibilities within the synthetic biology

  • De Miguel, Santiago R.
  • Manoli, Maria-Tsampika
  • Godoy, Manuel S.
  • Prieto, María Auxiliadora
1 p.-6 fig.-1 tab., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21. This study is supported by a “Ayudas para contratos predoctorales para la formación de doctores” fellowship (PRE2021-098281) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Golden Standard: a complete standard, portable, and interoperative MoClo tool for model and non-model proteobacteria

  • Blázquez, Blas
  • San León, David
  • Torres-Bacete, Jesús
  • Gómez-Luengo, Álvaro
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
16 p.-8 fig.-1 tab.-1 graph.abst., Modular cloning has become a benchmark technology in synthetic biology. However, a notable disparity exists between its remarkable development and the need for standardization to facilitate seamless interoperability among systems. The field is thus impeded by an overwhelming proliferation of organism-specific systems that frequently lack compatibility. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture. GS unlocks modular cloning applications for most bacteria, and delivers combinatorial multi-part assembly to create genetic circuits of up to twenty transcription units (TUs). Reliance on MoClo syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was validated in terms of DNA assembly, portability, interoperability and phenotype engineering in α-, β-, γ- and δ-proteobacteria. Furthermore, we provide a computational pipeline for parts characterization that was used to assess the performance of GS parts. To promote community-driven development of GS, we provide a dedicated web-portal including a repository of parts, vectors, and Wizard and Setup tools that guide users in designing constructs. Overall, GS establishes an open, standardized framework propelling the progress of synthetic biology as a whole., European Union's Horizon 2020 research and innovation program [814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), 870294 (MixUp)]; Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 [AEI /10.13039/501100011033], BIO2017-83448-R and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+); A.G.L. was funded by ‘Fondo Social Europeo’ and ‘Iniciativa de Empleo Juvenil (YEI)’ [PEJ-2020-AI/BIO-18028] and S.S. by a FPU (Ayuda para la formación de profesorado universitario) fellowship [FPU17/03978] from the Spanish Ministry of Universities. Funding for open access charge: Consejo Superior de Investigaciones Científicas (CSIC) [82582328]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A model-driven approach to upcycling recalcitrant feedstocks in Pseudomonas putida by decoupling PHA production from nutrient limitation

  • Manoli, Maria-Tsampika
  • Gargantilla-Becerra, Álvaro
  • Del Cerro, Carlos
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
  • Nogales, Juan
24 p.-7 fig.-1 graph. abst., Bacterial polyhydroxyalkanoates (PHAs) have emerged as promising eco-friendly alternatives to petroleum-based plastics since they are synthesized from renewable resources and offer exceptional properties. However, their production is limited to the stationary growth phase under nutrient-limited conditions, requiring customized strategies and costly two-phase bioprocesses. In this study, we tackle these challenges by employing a model-driven approach to reroute carbon flux and remove regulatory constraints using synthetic biology. We construct a collection of Pseudomonas putida-overproducing strains at the expense of plastics and lignin-related compounds using growth-coupling approaches. PHA production was successfully achieved during growth phase, resulting in the production of up to 46% PHA/cell dry weight while maintaining a balanced carbon-to-nitrogen ratio. Our strains are additionally validated under an upcycling scenario using enzymatically hydrolyzed polyethylene terephthalate as a feedstock. These findings have the potential to revolutionize PHA production and address the global plastic crisis by overcoming the complexities of traditional PHA production bioprocesses., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 633962 (P4SB), 870294 (MIX-up), and 101000733 (PROMICON). We also acknowledge support from the Spanish Ministry of Innovation and Science (AEI/10.13039/501100011033) through projects BIO2017-83448-R_TECMABIO, PID2020-112766RB-C21-BIOCIR, PID2022-139247OB-I00 (Rob3D), and TED2021-130689B-C33 (SyCoSys). Funding was likewise provided by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving water resistance of rice straw cellulose-based aerogels

  • Cabrera Villamizar, Laura
  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Fabra, María José
  • López-Rubio, Amparo
  • Prieto, María Auxiliadora
1 p., Annually, about 760 million tons of rice are produced worldwide. This results in agricultural residues such as rice straw. For 1 kg of rice grain, about 1.5 kg of rice straw is produced.Therefore, some management strategies have been studied to extract value-added compounds from this abundant residue and convert it into commodities. In this context, cellulose is one of the compounds studied that can be used for various applications, such as the development of materials and food packaging. Recently, cellulose-based aerogels have become the focus of research as a substitute for absorbent materials. However, using cellulose to absorb aqueous solutions is challenging because the material usually loses its integrity due to its hydrophilic nature. Therefore, stabilization methods should be proposed to maintain the integrity of the material under high humidity conditions to solve this problem., The aim of this work was to produce water stable cellulose-based aerogels from rice straw. Two strategies were investigated: first, TEMPO mediated oxidation followed by high pressure homogenization (HPH) and second, regeneration of cellulose by solubilization with ionic liquids.Briefly, rice straw cellulose was suspended in water by sonicating it at high intensity. Then, the suspension was oxidized and passed through HPH 2, 4 and 8 cycles at 600 bar. On the other hand, BMIM-Cl ionic liquid (IL) was used to dissolve the cellulose at 90 ºC. Then, the suspensions were poured off and freeze-dried. Both methods allowed the preparation of cellulose aerogels with improved water resistance. In addition, this work proposes a novel method to study the internal structure of the porous aerogel using confocal laser scanning microscopy (CLSM).The images acquired by CLSM showed differences in the size and distribution of microfibers in the aerogels at the different HPH cycles tested. In addition, the materials obtained by the regeneration method had different porosity/density than those produced by HPH. Therefore, HPH and regeneration by IL are valuable tools in the fabrication of materials with stable aerogel structure from rice straw. These advances mark a starting point for the development of cellulose- based aerogels without the need for compatibilization with other polymers., Spanish Ministry of Science and Innovation under the research grant PID2020-112766RB-C21, and Santiago Grisolia aid of Laura Cabrera-Villamizar (GRISOLIA/2021/050)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Designing biopolymers with advanced functional properties

  • Prieto, María Auxiliadora
1 p., The emergence of new technologies, such as synthetic biology, enables the creation of nextgeneration- advanced materials presenting smart functional properties. Among these group, biohybrid materials have recently grown in attention due to the enormous range of possibilities presented by a material that has the functionalities of living cells or simply enzymes supported on a scaffold. Bacterial biopolymers such as bacterial cellulose (BC) and polyhydroxyalkanotes (PHAs) have stood out in thisfield as their properties can be engineered by microbial biotechnology tools through sustainable bioprocesses combined with materials science. Moreover, the fabrication of new formulations based on BC and PHA polymers with complementary characteristics provides them with highly diverse properties, conferring them non-native features [1]. BC, an extracellular biopolymer produced by bacteria of the genus Komagataeibacter spp., shows excellent mechanical performance with a high capacity of retaining water in its nanofibrillar structure that can be controlled by bioprocess engineering. PHAs, intracellular biopolyesters synthetized by bacteria of many genus, highlight by theirhydrophobic character which triggers this material has excellent barrier properties. Designing cell factories for the production of novel PHAs via smart metabolic engineering is key to obtain à la carte materials with tailored monomer composition and thus, customized mechanical and thermal properties. In this work, we used the model mcl-PHA producing bacterium, Pseudomonas putida KT2440 as a chassis, to assemble heterologous PHA biosynthetic modules to implement an orthogonal PHA switch in a chassis specifically constructed to override endogenous multilevel regulation of PHA synthesis in the native strain. The final goal is to design customized materials with compartments of different functionalities involving the complementary use of BC and PHA and carrying active cargos (i.e. enzymes and/or microorganisms). Several strategies will be presented and discussed such as gaining control of bacterial cellulose colonization by PHA-producing microorganisms to develop bioplasticized ultrathin films [2] and the use of biopolymers for enzybiotics delivery [3]., This project receives funding from the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21), the Community of Madrid (P2018/NMT4389) and the European Union s Horizon 2020 research and innovation program (under grants agreement No. EU 101000733 (PROMICON), 870294 (MIX-up) and 814418 (SinFonia))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can bioplastics always offer a truly sustainable alternative to fossil-based plastics?

  • Serrano-Aguirre, Lara
  • Prieto, María Auxiliadora
10 p.-2 fig.-1 tab., Bioplastics, comprised of bio-based and/or biodegradable polymers, have the potential to play a crucial role in the transition towards a sustainable circular economy. The use of biodegradable polymers not only leads to reduced greenhouse gas emissions but also might address the problem of plastic waste persisting in the environment, especially when removal is challenging. Nevertheless, biodegradable plastics should not be considered as substitutes for proper waste management practices, given that their biodegradability strongly depends on environmental conditions. Among the challenges hindering the sustainable implementation of bioplastics in the market, the development of effective downstream recycling routes is imperative, given the increasing production volumes of these materials. Here, we discuss about the most advisable end-of-life scenarios for bioplastics. Various recycling strategies, including mechanical, chemical or biological (both enzymatic and microbial) approaches, should be considered. Employing enzymes as biocatalysts emerges as a more selective and environmentally friendly alternative to chemical recycling, allowing the production of new bioplastics and added value and high-quality products. Other pending concerns for industrial implementation of bioplastics include misinformation among end users, the lack of a standardised bioplastic labelling, unclear life cycle assessment guidelines and the need for higher financial investments. Although further research and development efforts are essential to foster the sustainable and widespread application of bioplastics, significant strides have already been made in this direction., Authors want to acknowledge the financial support from the CSIC Interdisciplinary Thematic Platform (PTI) Sustainable Plastics towards a Circular Economy (PTI-Susplast), the Spanish Ministry of Science, Innovation and Universities MCIU/AEI/10.13039/501100011033 under the research grant BIOCIR (PID2020-112766RB-C21) and REVOLUZION (PLEC2021-008188/Next Generation EU/PRTR) and European Union's Horizon 2020 Research and Innovation Program, grant agreement no. Mix-UP-870294., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-upcycling of viscose/polyamide textile blends waste to biopolymers and fibers

  • Mihalyi, Sophia
  • Sikacek, Eva
  • Campano, Cristina
  • Hernández, Natalia
  • Rodríguez, Alberto
  • Mautner, Andreas
  • Prieto, María Auxiliadora
  • Quartinello, Felice
  • Guebitz, Georg M.
10 p.-5 fig.-1 tab., Innovative approaches for recycling and upcycling of textile waste are required to sustainably treat the tremendous, discarded amounts. Due to their high specificity and mild reaction conditions, enzymes offer an environmentally friendly alternative for separation of blended materials. Glucose was recovered from cellulose (viscose) and polyamide blends and utilized as carbon source for biosynthesis of two biodegradable polymers. Polyhydroxybutyrate (PHB) was produced by Cupriavidus necator reaching an intracellular accumulation of 60 % (w/w) and 5.2 g/L of PHB from 20 g/L of glucose-rich hydrolysate. Bacterial cellulose (BC) was produced by Komagataeibacter sucrofermentans exhibiting equal properties to BC produced in standard media as confirmed by FTIR spectroscopy, SEM, and XRD. The recovered polyamide fibers were thermo-mechanically reprocessed and characterized by tensile testing showing comparable properties to virgin material. Thus, a combined bioconversion and mechanical reprocessing approach for textile waste is demonstrated allowing for recycling and valorization of each fraction of blended materials., This project received funding from the European Union’s Horizon 2020 program under the grant agreement 101003906 (SCIRT project)and the Spanish Ministry of Science, Innovation and Universities(MCIU/ AEI /10.13039/501100011033), under the research grant BIOCIR (PID2020-112766RB-C21). Furthermore, the authors would like to give special thanks to Novozymes (Denmark) for kindly supplying the enzymes and BASF for kindly providing virgin PA as reference material.Open access funding was provided by the University of Natural Resources and Life Sciences Vienna (BOKU). Additionally, the PhD project is supported by the Doctoral School Biomaterials and Biointerfaces(BioMatInt, BOKU). The authors would like to thank Laura López-Mérida for technical support in routine analytics and data evaluation.Moreover, the authors want to thank the Christian Doppler Forschungsgesellschaft(CDG), for their funding of the “JR Centre Recovery Strategies for Textiles” facilitating this study. The research project was funded by the Austrian Federal Ministry of Labor and Economic Affairs and the National Foundation for Research, Technology and Development as well as the Christian Doppler Research Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bdellovibrio’s prey-independent growth is fuelled by amino acids as a carbon source

  • Herencias, Cristina
  • Rivero-Buceta, Virginia
  • Salgado-Briegas, Sergio
  • Baquero, Fernando
  • Del Campo, Rosa
  • Nogales, Juan
  • Prieto, María Auxiliadora
16 p.-5 fig., Identifying the nutritional requirements and growth conditions of microorganisms is crucial for determining their applicability in industry and understanding their role in clinical ecology. Predatory bacteria such as Bdellovibrio bacteriovorus have emerged as promising tools for combating infections by human bacterial pathogens due to their natural killing features. Bdellovibrio’s lifecycle occurs inside prey cells, using the cytoplasm as a source of nutrients and energy. However, this lifecycle supposes a challenge when determining the specific uptake of metabolites from the prey to complete the growth inside cells, a process that has not been completely elucidated. Here, following a model-based approach we illuminate the ability of Bdellovibrio bacteriovorus to replicate DNA, increase biomass, and generate adenosine triphosphate (ATP) in an amino acid-based rich media in the absence of prey, keeping intact its predatory capacity. In this culture, we determined the main carbon sources used and their preference, being glutamate, serine, aspartate, isoleucine, and threonine. This study offers new insights into the role of predatory bacteria in natural environments and establishes the basis for developing new Bdellovibrio applications using appropriate metabolic and physiological methodologies., CH is supported by Sara Borrell contract (Instituto de Salud Carlos III, CD21-00115) and and the Convocatoria Intramural Emergentes 2021 FIBioHRC-IRYCIS. Cod. IPM-21 n°C13. This work was supported by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+). SS was founded by a FPU (Ayuda para la formación de profesorado universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities. This work has received funding from the European Union’s Horizon 2020 research, the innovation programme under grant agreement No.101081776 (project AgriLoop), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). J. Nogales acknowledges the support of SyCoSys project, TED2021-130689B-C33 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. perpetuity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling the expression of heterologous genes in Bdellovibrio bacteriovorus using synthetic biology strategies

  • Salgado, Sergio
  • Hernández, Natalia
  • Prieto, María Auxiliadora
Bdellovibrio bacteriovorus HD100 is an obligate predatory bacterium that preys upon Gram-negative bacteria. It has been proposed to be applied as a "living antibiotic" in several fields such as agriculture or even medicine, since it is able to prey upon bacterial pathogens. Its interesting lifestyle makes this bacterium very attractive as a microbial chassis for co-culture systems including two partners. A limitation to this goal is the scarcity of suitable synthetic biology tools for predator domestication. To fill this gap, we have firstly adapted the hierarchical assembly cloning technique Golden Standard (GS) to make it compatible with B. bacteriovorus HD100. The chromosomal integration of the Tn7 transposon's mobile element, in conjunction with the application of the GS technique, has allowed the systematic characterization of a repertoire of constitutive and inducible promoters, facilitating the control of the expression of heterologous genes in this bacterium. PJExD/EliR proved to be an exceptional promoter/regulator system in B. bacteriovorus HD100 when precise regulation is essential, while the synthetic promoter PBG37 showed a constitutive high expression. These genetic tools represent a step forward in the conversion of B. bacteriovorus into an amenable strain for microbial biotechnology approaches., Horizon 2020 Framework Programme,Grant/Award Number: 76099; HORIZONEUROPE Framework Programme,Grant/Award Number: 101081776; Agencia Estatal de Investigación, Grant/Award Number: BIO2017- 8344- 8- R and PID2020-112766RB- C21; Comunidad deMadrid, Grant/Award Number: P2018/NMT4389; Spanish Ministry of Science,Innovation and Universities, Grant/AwardNumber: FPU17/03978, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Golden Standard: A complete standard, portable, and interoperative MoClo tool for model and non-model bacterial hosts

  • Blázquez, Blas
  • Torres-Bacete, Jesús
  • San León, David
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
39 p.-7 fig.-2 tab., Modular cloning assembly has become a benchmark technology in synthetic biology. However, there is a mismatch between its impressive development and the standardization required to promote interoperability between the different systems available. The full development of the field is thus hampered by a surge of oftentimes incompatible organism-specific systems. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture (SEVA). GS unlocks modular cloning applications with any type of microorganism and delivers consistent combinatorial multi-part assembly of standardized genetic elements to create genetic circuits of up to twenty transcription units. Reliance on the Golden Gate syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was fully validated in terms of DNA assembly performance, portability and phenotype engineering in model and non-model bacteria. In order to facilitate the widespread adoption and future community-driven development of GS, we provide a web-portal featuring: i) a repository of parts and vectors, ii) a SBOLHub for exchange and analysis of constructs and iii) Wizard and Setup tools to guide the design of constructs using stored and user-specific parts., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under grant agreements no. 814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), and 870294 (MixUp), the Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 (AEI /10.13039/501100011033), BIO2017-83448-R, and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). SS was supported by a FPU (Ayuda para la formación de profesorado universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bdellovibrio’s prey-independent growth is fuelled by amino acids as a carbon source

  • Herencias, Cristina
  • Rivero-Buceta, Virginia
  • Salgado-Briegas, Sergio
  • Hernández, Natalia
  • Baquero, Fernando
  • Del Campo, Rosa
  • Nogales, Juan
  • Prieto, María Auxiliadora
11 p.-5 fig., Identifying the nutritional requirements and growth conditions of microorganisms is crucial for determining their applicability in industry and understanding their role in clinical ecology. Predatory bacteria such as Bdellovibrio bacteriovorus have emerged as promising tools for combating infections by human bacterial pathogens due to their natural killing features. Bdellovibrio’s lifecycle occurs inside prey cells, using the cytoplasm as a source of nutrients and energy. However, this lifecycle supposes a challenge when determining the specific uptake of metabolites from the prey to complete the growth inside cells, a process that has not been completely elucidated. Here, following a model-based approach, we illuminate the ability of B. bacteriovorus to replicate DNA, increase biomass, and generate adenosine triphosphate (ATP) in an amino acid-based rich media in the absence of prey, keeping intact its predatory capacity. In this culture, we determined the main carbon sources used and their preference, being glutamate, serine, aspartate, isoleucine, and threonine. This study offers new insights into the role of predatory bacteria in natural environments and establishes the basis for developing new Bdellovibrio applications using appropriate metabolic and physiological methodologies., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. CH is supported by Sara Borrell contract (Instituto de Salud Carlos III, CD21-00115) and the Convocatoria Intramural Emergentes 2021 FIBioHRC-IRYCIS. Cod. IPM-21 n° C13. This work was supported by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy + (PTI-SusPlast +). SS was founded by a FPU (Ayuda para la Formación de Profesorado Universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities. This work has received funding from the European Union’s Horizon 2020 research, the innovation programme under grant agreement No.101081776 (project AgriLoop), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). J. Nogales acknowledges the support of SyCoSys project, TED2021-130689B-C33 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition

  • Cabrera Villamizar, Laura
  • Campano, Cristina
  • López-Rubio, Amparo
  • Fabra, María José
  • Prieto, María Auxiliadora
This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bacterial cellulose with CHAPK‑mediated specific antimicrobial activity against Staphylococcus aureus

  • Blanco Parte, Francisco German
  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Hernández-Arriaga, A.M.
  • Prieto, María Auxiliadora
15 p.-5 fig.-1 tab., Wound healing represents a complex biological process often hampered by bacterial infections, in particular those caused by Staphylococcus aureus, which is already multiresistant to many antibiotics. In this sense, enzybiotics have additional advantages over conventional antibiotics, since they provide pathogen specificity and do not contribute to antibiotic resistance. However, their soluble administration at the wound site would result in enzyme leakage. On the other hand, bacterial cellulose (BC) pellicles present a very promising dressing and scaffold, given its high purity, water retention capacity, and barrier effect in the wound against possible contaminants. In this study, we present a novel approach that incorporates the enzybiotic CHAPK into BC to develop functionalized membranes that exhibit targeted and controlled antimicrobial activity against S. aureus. The kinetic tests revealed a continuous loading of the enzybiotic into BC until it reaches a maximum and a two-stage release process, characterized by an initial fast release followed by a sustained release. Attenuated total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and Confocal Laser Scanning Microscopy (CLSM) confirmed the incorporation and the preferential surface localization of CHAPK within the BC membranes. Finally, the BC/CHAPK materials demonstrated the sustained reduction of up to 4 logarithmic units in the viability of S. aureus. Overall, the biomaterials developed here exhibit promising antimicrobial efficacy against S. aureus, offering a potential strategy for wound management and skin infection control while maintaining unharmed the commensal skin microbiota, which impairment could compromise the integrity of the skin barrier function., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors received financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up), the CSIC Interdisciplinary Thematic Platform (PTI +) Sustainable Plastics towards a Circular Economy (PTI-Susplast +), and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). FGB is a recipient of the grant PRE2018-083859 awarded by the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hints from nature for a PHA circular economy: Carbon synthesis and sharing by Pseudomonas solani GK13

  • Jiménez, José D.
  • Godoy, Manuel S.
  • Del Cerro, Carlos
  • Prieto, María Auxiliadora
15 p.-7 fig.-5 tab., Polyhydroxyalkanoates (PHAs) are a well-known group of biodegradable and biocompatible bioplastics that are synthesised and stored by microorganisms as carbon and energy reservoirs. Extracellular PHA depolymerases (ePhaZs), secreted by a limited range of microorganisms, are the main hydrolytic enzymes responsible for their environmental degradation. Pseudomonas sp. GK13, initially identified as P. fluorescens GK13, produces PHA and a prototypic ePhaZ that specifically degrades mcl-PHA. In this study, a comprehensive characterization of strain GK13 was performed. The whole genomic sequence of GK13 was consolidated into one complete chromosome, leading to its reclassification as P. solani GK13. We conducted a detailed in silico examination of the bacteria genomic sequence, specifically targeting PHA metabolic functions. From the different growth conditions explored, PHA accumulation occurred only under carbon/nitrogen (C/N) imbalance, whereas ePhaZ production was induced even at balanced C/N ratios in mineral media. We extend our study to other bacteria belonging to the Pseudomonas genus revealing that the ePhaZ production capacity is closely associated with mcl-PHA synthesis capacity, as also suggested by metagenomic samples. This finding suggests that these types of microorganisms could contribute to the carbon economy of the microbial community, by storing PHA in carbon-rich times, and sharing it with the rest of the population during times of carbon scarcity through PHA hydrolysis. The conclusion pointed that carbon cycle metabolism performed by P. solani GK13 may contribute to the environmental circular economy at a microscopic scale., Funding Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 870294 (MIX UP), the Ministry of Science, Innovation and Universities: grant BIOCIR (PID2020-112766RB-C21) funded by MICIU/AEI/ 10.13039/501100011033 and the CSIC Interdisciplinary Thematic Platform (PTI) Sustainable Plastics towards a Circular Economy (PTI-Susplast). José D. Jiménez is the recipient of a postdoctoral FPU grant by the Ministry of Science, Innovation and Universities (FPU21/04158)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Order matters: Methods for extracting cellulose from rice straw by coupling alkaline, ozone and enzymatic treatments

  • Cabrera Villamizar, Laura Andrea
  • Ebrahimi, Mahrokh
  • Martínez-Abad, Antonio
  • Talens Perales, David
  • López-Rubio, Amparo
  • Fabra, María José
Rice straw is a widely produced residue that can be converted into value-added products. This work aimed at using greener processes combining mild alkali (A), ozone (O) and enzymatic (engineered xylanase) (E) treatments to extract cellulose and other value-added compounds from rice straw and to evaluate the effects of the order of the treatments. Solid (S) and liquid (L) fractions from the process were collected for physicochemical characterization. AOE treatment showed the best capacity to extract high purity cellulose and other valuable compounds. The lignin content was significantly decreased independently of the order of the treatments and, its content in the extract obtained after the AOE process was lower than the one obtained after the OAE process. Moreover, thermal stability of the samples increased after the enzymatic process, being higher in SAOE. The alkaline treatment increased the hemicellulose and polyphenol content (antioxidant activity) in the liquid fractions (LA and LOA). In contrast, the ozonized liquid fractions had lower polyphenol content. Therefore, alkali was fundamental in the process. In conclusion, the AOE strategy could be a more environmentally friendly method for extracting cellulose and other valuable compounds, which could be used to develop active materials in the future., Grant PID2020-112766RB-C21 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Novel double-shelled biocarriers: polyester-grafted bacterial cellulose for enhanced bioactive cargo trapping

  • Rivero-Buceta, Virginia
  • García-Fernández, Luis
  • Campano, Cristina
  • Hernández, Natalia
  • Aguilar, Maria Rosa
  • Prieto, María Auxiliadora
1 p., Designing biocarriers is an effective approach for preserving bioactive components in challenging conditions and ensuring their controlled release in targeted environments, thereby enhancing their efficacy. Bacterial polymers, noted for their beneficial properties, create robust and stable structures and are among the most commonly used sources for developing innovative materials. This research focuses on creating particles derived from bacterial cellulose (BC) and biobased polyhydroxybutyrate (PHB) to serve as bionanocarriers. BC, a hydrophilic and porous biopolymer, is known for its high-water retention and tensile strength, whereas PHB, a hydrophobic polymer, provides excellent barrier properties and UV resistance. This study aims to develop a biodegradable PHB coating on BC microparticles to regulate bacterial release. A primary challenge is ensuring the compatibility of both polymers in a stable system . To address this, we covalently bonded the two polymers to form the core particle (BC-PHB). We then utilized a one-step coaxial electrospray technique to prepare unique spherical double-shell hollow particles (DSHP). These DSHP feature a PHB outer shell and a BC-PHB inner shell with a hollow core capable of encapsulating live bacterial cells. The resulting DSHP are stable, spherical microparticles with a PHB outer surface and a BC-PHB inner layer that can house living cells. The inner cavity can hold bacteria at concentrations up to 1.4 ×108 CFU/mL, while the thin outer PHB layer serves as a protective barrier, ensuring the stability and controlled,sustained release of the enclosed live cargo. Due to the biodegradability and low toxicity of the components, BC-PHB DSHP show promise for applications in biomedical or environmental fields., This work received financial support from the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020–112766RB-C21), funded by MCIN/AEI/10.13039/501100011033/ and from the Community of Madrid [P2018/NMT4389]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and Synthesis of Hollow Particles Based on Bacterial Cellulose and Polyhydroxybutyrate for Microbial Entrapping Using Coaxial Electrospray Technology

  • Rivero-Buceta, Virginia
  • García-Fernández, Luis
  • Campano, Cristina
  • Hernández-Herreros, Natalia
  • Aguilar, María Rosa
  • Prieto, M. Auxiliadora
The design of biocarriers presents an effective approach for preserving bioactive elements and enabling controlled release in specific environments. This study introduces a novel biocarrier structure composed of two biodegradable, non-toxic, yet inherently incompatible bacterial biopolymers: bacterial cellulose (BC), a hydrophilic porous polymer known for its high water-holding capacity (up to 400 times its dry weight) and tensile strength, and polyhydroxybutyrate (PHB), a hydrophobic polymer characterized by its excellent barrier properties and UV stability. Using a coaxial electrospray technique, double-shelled hollow particles (DSHP) with a spherical architecture and an average diameter of 360 µm were produced. These particles consist of an outer PHB shell that serves as a protective barrier, and an inner BC-based layer designed to support microbial viability. To ensure structural integrity and enhance compatibility between the polymers, PHB chains were grafted onto BC, achieving a modification degree of 31%, prior to electrospraying. The resulting DSHP demonstrated an internal cavity capable of housing bacterial loads up to 108 CFU/mL, maintaining cell viability for at least 2 days and enabling controlled release profile. Additionally, the optimized electrospray conditions ensured high reproducibility and stability. This promising particle configuration offers potential applicability across various fields, from biomedicine to environmental applications., The authors received financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up), the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389), and the grants BIOCIR (PID2020-112766RB-C21) and OPENVIRO (PID2023-146557OB-C21) funded by MCIN/AEI/ 10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible feeding strategy for high-yield PHA bioprocessing in Cupriavidus necator H16 from anaerobically fermented industrial wastewater

  • Hernández, Natalia
  • Rodríguez, Alberto
  • Rivero-Buceta, Virginia
  • Rojas, Antonia
  • Prieto, María Auxiliadora
10 p.-4 fig.-3 tab.-1 graph. abst., Polyhydroxyalkanoates (PHAs) are promising bioplastics. Their cost-effective production might be possible through waste valorisation. This study explores agro-industrial wastewater converted into organic acids by anaerobic acidification as a substrate for PHA biosynthesis by Cupriavidus necator H16. A tailored fed-batch strategy mitigated organic acids toxicity by aligning feed timing with biomass growth and carbon source uptake. This approach enabled PHA accumulation with a final biomass of 19 g/L and 85 % polymer content. This is the highest level of polymer production reported for wild-type C. necator on such complex substrates. The operational mode significantly influenced the properties of the polymer, reducing the polydispersity index from 5.6 to 2.2 and increasing the molecular weight from 3.6 to 5.6 kDa, enhancing the polymer's thermal performance with a melting point of 176 °C. These findings emphasise the importance of feeding strategies in both bioprocess efficiency and PHA properties, providing valuable insights for the production of bioplastics on an industrial scale., This research received funding from the Bio-based Industries Joint Undertaking (JU) under the European Horizon 2020 research and innovation programme under grant agreement No. 745737 (Afterlife). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics Towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science, Innovation and Universities under the research grant BIOCIR (PID2020-112766RB-C21) and OPENVIRO (PID2023-1465570B-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Order matters: Methods for extracting cellulose from rice straw by coupling alkaline, ozone and enzymatic treatments [DATASET]

  • Cabrera Villamizar, Laura Andrea
  • Ebrahimi, Mahrokh
  • Martínez-Abad, Antonio
  • Talens Perales, David
  • López-Rubio, Amparo
  • Fabra, María José
Rice straw is a widely produced residue that can be converted into value-added products. This work aimed at using greener processes combining mild alkali (A), ozone (O) and enzymatic (engineered xylanase) (E) treatments to extract cellulose and other value-added compounds from rice straw and to evaluate the effects of the order of the treatments. Solid (S) and liquid (L) fractions from the process were collected for physicochemical characterization. AOE treatment showed the best capacity to extract high purity cellulose and other valuable compounds. The lignin content was significantly decreased independently of the order of the treatments and, its content in the extract obtained after the AOE process was lower than the one obtained after the OAE process. Moreover, thermal stability of the samples increased after the enzymatic process, being higher in SAOE. The alkaline treatment increased the hemicellulose and polyphenol content (antioxidant activity) in the liquid fractions (LA and LOA). In contrast, the ozonized liquid fractions had lower polyphenol content. Therefore, alkali was fundamental in the process. In conclusion, the AOE strategy could be a more environmentally friendly method for extracting cellulose and other valuable compounds, which could be used to develop active materials in the future., Grant PID2020-112766RB-C21 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition [DATASET]

  • Cabrera Villamizar, Laura A.
  • Campano, Cristina
  • López-Rubio, Amparo
  • Fabra, María José
  • Prieto, María Auxiliadora
This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly-3-hydroxybutyrate production from used cooking olive oil by Cupriavidus necator DSM 545: Bioprocess development and OTR-kLa kinetic modelling in continuous fed-batch fermentation

  • Rodríguez-Izquierdo, Alberto
  • Hernández-Herreros, Natalia
  • Rivero-Buceta, Virginia
  • Rodríguez-Carreiro, Marina
  • García, Eugenio Sanz
  • Prieto, M Auxiliadora
Large-scale production of poly-3-hydroxybutyrate (PHB) is hindered by high operational costs, mainly due to raw material expenses and fermentation requirements. Waste plant oils offer a sustainable, low-cost alternative, supporting residue valorisation. In particular, used cooking olive oil (UCOO), a challenging waste stream in the Mediterranean, requires efficient recycling and bioconversion strategies. In this study, we investigate the production of PHB from UCOO as the sole carbon source by Cupriavidus necator DSM 545. Operating in continuous fed-batch regime, we reached 125.5 g/L of total biomass and 95.3 g PHB/L, tripling the maximum productivity up to 1.8 g PHB/(L·h) and achieving a 99% of waste conversion. Moreover, we identified oxygen transfer rate (OTR) as a key modulator of carbon flux distribution: PHB accumulation was maximized at 0.05 mol O2/(L·h), while lower values of this variable boosted cell growth. Based on these observations, we developed a kinetic model to predict residual biomass, oil consumption, oxygen dynamics and PHB accumulation, by using experimental profiles of volumetric mass transfer coefficient (kLa) and culture dilution rate (D) as independent variables. Our findings validate UCOO as an effective alternative substrate for PHB production and highlight the critical influence of OTR in optimizing high-yield PHA fermentation strategie, This work has been supported by the Spanish Ministry of Science and Innovation under research grants BIOCIR (PID2020-112766RB-C21), FERMENTA (EQC2021-006941-P) and OPENVIRO (PID2023- 146557OB-C21), funded by AEI/10.13039/501100011033, Peer reviewed, Modelo experimental alternativo-NAM, Organismos alternativos no vertebrados - Microorganismos Unicelulares - Bacterias
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional redundancy driven by isocitrate dehydrogenase enhances metabolic robustness in Pseudomonas putida KT2440

  • Manoli, Maria-Tsampika
  • Herrera Alarcón, Sandra
  • Gargantilla-Becerra, Álvaro
  • Prieto, María Auxiliadora
  • Nogales, Juan
Prokaryotic isocitrate dehydrogenase (PIDH) is a conserved and highly versatile enzyme regulating carbon flux between the TCA cycle and the glyoxylate shunt. While most mesophilic organisms encode a single PIDH, the industrial chassis Pseudomonas putida KT2440 harbours two isoforms: a monomeric (IDH) and a dimeric (ICD). The physiological significance of this dual-system in mesophiles remains poorly understood, yet it may provide a framework for understanding metabolic flexibility and flux regulation in biotechnological applications., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by the European Union’s Horizon 2020 research and innovation program under grant agreements 633962 (P4SB) and 870294 (MIX-up). Additional support was provided by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science, Innovation and Universities (AEI/10.13039/501100011033) through research grants BIOCIR (PID2020-112766RB-C21), Rob3D (PID2022-139247OB-I00), RobExplode (PID2019-108458RB-I00), NOVELPOL (202320E107), and SMARTERIAL (PID2023-146557OB-C21). AG acknowledges funding from a predoctoral contract (FPI) associated with RobExplode project (PRE2020-092257)., Peer reviewed