Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Homogenization of unsaturated bentonite during hydration

  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Barboza de Vasconcelos, Ramón
  • Rodríguez Romero, Carlos Eduardo
  • Vaunat, Jean|||0000-0003-3579-9652
  • Villar Galicia, María Victoria
Bentonite barriers are a key component in may designs of deep geological repositories for high level nuclear waste. During the hydration stage, the bentonite undergoes non-uniform changes in dry density that may persist even after reaching a fully saturated state. Since dry density controls the properties of the bentonite that ensure the functions of safety of the barrier, the potential of bentonite for homogenization or otherwise is a matter of high relevance. The paper presents the results and the analyses of two hydration tests on initially heterogenous samples, especially designed to explore the phenomena and processes underlying the homogenisation of bentonite materials. The formulation and constitutive model used in the analyses are briefly presented followed by a description of the tests. Subsequently, the experimental dataobtained from the tests are discussed together with the results of the hydromechanical analyses performed. Particular attention is given to the degree of homogenization of the specimens achieved at the end of the tests. The simulations have resulted in a very satisfactory agreement with test observations, especially egarding the final state of the samples, thus enhancing the confidence in the numerical tool employed., The work presented has been developed in the framework of the Bentonite Mechanical Evolution Project (BEACON). The project receives funding from the Euratom research and training programme 2014-2018 under grant agreement No 745942. The support of Conacyt (Id. no. 710153) to the third author is also gratefully acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Beacon: bentonite mechanical evolution

  • Sellin, Patrick
  • Westermark, Mary
  • Leupin, Olivier
  • Norris, Simon
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Wieczorek, Klaus
  • Talandier, Jean
  • Swahn, Johan
The aim of Beacon is to develop the understanding of fundamental processes that lead to material homogenisation, as well as to improve capabilities for numerical modelling. In earlier assessments of bentonite EBS, the mechanical interaction between the installed bentonite components has been neglected and an “ideal” final state has generally been assumed. Key features of the project are (1) re-evaluation of the available knowledge to extract the crucial data to compile the qualitative and quantitative data and to enhance the conceptual understanding. (2) Enhanced, robust and practical numerical tools based on a good scientific understanding, which have the expected predictive capabilities regarding the evolution of engineered barriers and seals. (3) A developed database with experimental data needed by the quantitative models. (4) Verified calculation tools based on experimental results in different scales. The Beacon project is required for the pan-European objectives at building confidence amongst regulators and stakeholders regarding the performance of the engineered barriers in a geological repository., The BEACON project receives funding from the Euratom research and training programme 2014-2018 under grant agreement No 745942., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical modelling of unsaturated bentonite subjected to different hydro-mechanical stress paths, Modélisation numérique de bentonite insaturée soumise à différents chemins de contraintes hydromécaniques

  • Rodríguez Romero, Carlos Eduardo
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Barboza de Vasconcelos, Ramón
  • Vaunat, Jean|||0000-0003-3579-9652
Bentonite-based materials such as MX-80 bentonite have been considered for their use as engineered barriers (EB) in deep radioactive waste geological repositories, mainly due to their low permeability, swelling pressure, and radionuclide retention properties. To ensure their integrity and to know their influence, different hydro-mechanical stress paths must be assessed. The European project BEACON (Bentonite Mechanical Evolution), addressed the behavior of MX-80 bentonite subjected to different conditions including these laboratory hydration tests carried out by EPFL (Lausanne, Switzerland). The experiments consist of the use of granular MX-80 bentonite in the as-poured state subjected to hydration, simulating the EB concept. For the fulfillment of the task, the constitutive response of the model is evaluated, decreasing the suction linearly to zero from its initial value simultaneously in the entire domain of analysis. A purely mechanical constitutive model calculation and noflow conditions are enforced to probe the predictive power of the proposed numerical model. The paper presents a comparison between these numerical simulations and the laboratory test data showing satisfactory results.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Physical evolution of a bentonite buffer during 18 years of heating and hydration

  • Villar Galicia, María Victoria
  • Iglesias, Rubén Javier
  • Garcia Siñeriz, Jose Luis
  • Lloret Morancho, Antonio|||0000-0001-7991-8487
  • Huertas Ilera Ilera, Fernando
The FEBEX in situ experiment was a full-scale test reproducing the near-field of an underground nuclear waste repository. It was performed in a gallery excavated in granite, two heaters simulated the thermal effect of the waste canisters and a bentonite barrier composed of highly-compacted blocks surrounded them, acting as buffer between the heaters and the crystalline host rock. The barrier slowly hydrated with the natural incoming groundwater. The bentonite and rock were instrumented and the sensors provided information about the state of the barrier. Half of the experiment was dismantled after five years of operation (partial dismantling), and the other half was left running for subsequent thirteen years before the complete, final dismantling. During both the partial and the final dismantling numerous samples of bentonite were taken for the on-site determination of dry density and water content. This work compares the physical state of the bentonite barrier after two different periods of time, drawing conclusions about the performance of the barrier and the factors affecting its saturation rate and evolution. The physical state of the barrier was mostly conditioned by the heating and hydration processes, although at some points it was affected by installation particularities. The dry density gradients generated proved to be persistent, and maybe largely irreversible, since they were already observed after five years of operation and remained for another thirteen years, despite the fact that the degree of saturation at the end of the experiment was overall quite high. These gradients did not impair the performance of the barrier and its sealing ability. To properly compute the bentonite degree of saturation the differences between the microstructural and macrostructural water density have to be taken into account, and this is essential for the proper estimation of the time needed for full saturation of the barrier. In any case, the water content changes evidenced the slowing down of the hydration rate over time, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling the hydration of bentonites under isothermal and non-isothermal conditions using a double-porosity approach

  • Pacelli, Rubem Vasconcelos|||0000-0001-5933-8565
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Rodríguez Romero, Carlos Eduardo
  • Vaunat, Jean|||0000-0003-3579-9652
The constitutive model for expansive materials described here follows the usual double-porosity approach that represents the clay soil as two overlapping pore media (microstructure and macrostructure) coupled through a micro-macro strain mechanism. However, the current formulation also includes a local water mass transfer controlling the saturation of the microstructure, the definition of water retention curves for each structural level, and the occurrence of thermal strains in both pore domains. These additional features enhance the model's ability to simulate the response of bentonites under varying moisture conditions. This double-porosity model satisfactorily simulated some infiltration tests taken from the literature, reproducing the main test observations and validating its use for predicting the behaviour of bentonites in various geotechnical engineering scenarios. The infiltration tests selected were carried out in columns made of FEBEX and MX-80 bentonites under isothermal and non-isothermal conditions to characterize the main hydro-mechanical and thermo-hydro-mechanical processes that occur within a bentonite barrier hydrated under confined conditions. The numerical simulations showed that structural changes in bentonite materials during the transient hydration phase are due to the irreversible response of the macrostructure (changes in macroporosity) but also depend on the mechanisms controlling the saturation of the microstructure., The work presented in this paper was developed in the framework of the Bentonite Mechanical Evolution Project (BEACON) and the European Joint Programme on Radioactive Waste Management (EURAD-HITEC) and received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement N◦ 745942 and from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement n◦ 847593, respectively. The support of Conacyt (Id. N◦ 710153) to the third author is gratefully acknowledged. The financial and technical support of ENRESA is also gratefully acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Beacon: bentonite mechanical evolution

  • Sellin, Patrick
  • Westermark, Mary
  • Leupin, Olivier
  • Norris, Simon
  • Gens Solé, Antonio
  • Wieczorek, Klaus
  • Talandier, Jean
  • Swahn, Johan
The aim of Beacon is to develop the understanding of fundamental processes that lead to material homogenisation, as well as to improve capabilities for numerical modelling. In earlier assessments of bentonite EBS, the mechanical interaction between the installed bentonite components has been neglected and an “ideal” final state has generally been assumed. Key features of the project are (1) re-evaluation of the available knowledge to extract the crucial data to compile the qualitative and quantitative data and to enhance the conceptual understanding. (2) Enhanced, robust and practical numerical tools based on a good scientific understanding, which have the expected predictive capabilities regarding the evolution of engineered barriers and seals. (3) A developed database with experimental data needed by the quantitative models. (4) Verified calculation tools based on experimental results in different scales. The Beacon project is required for the pan-European objectives at building confidence amongst regulators and stakeholders regarding the performance of the engineered barriers in a geological repository., The BEACON project receives funding from the Euratom research and training programme 2014-2018 under grant agreement No 745942., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Physical evolution of a bentonite buffer during 18 years of heating and hydration

  • Villar Galicia, María Victoria
  • Iglesias, Rubén Javier
  • Garcia Siñeriz, Jose Luis
  • Lloret Morancho, Antonio
  • Huertas Ilera Ilera, Fernando
The FEBEX in situ experiment was a full-scale test reproducing the near-field of an underground nuclear waste repository. It was performed in a gallery excavated in granite, two heaters simulated the thermal effect of the waste canisters and a bentonite barrier composed of highly-compacted blocks surrounded them, acting as buffer between the heaters and the crystalline host rock. The barrier slowly hydrated with the natural incoming groundwater. The bentonite and rock were instrumented and the sensors provided information about the state of the barrier. Half of the experiment was dismantled after five years of operation (partial dismantling), and the other half was left running for subsequent thirteen years before the complete, final dismantling. During both the partial and the final dismantling numerous samples of bentonite were taken for the on-site determination of dry density and water content. This work compares the physical state of the bentonite barrier after two different periods of time, drawing conclusions about the performance of the barrier and the factors affecting its saturation rate and evolution. The physical state of the barrier was mostly conditioned by the heating and hydration processes, although at some points it was affected by installation particularities. The dry density gradients generated proved to be persistent, and maybe largely irreversible, since they were already observed after five years of operation and remained for another thirteen years, despite the fact that the degree of saturation at the end of the experiment was overall quite high. These gradients did not impair the performance of the barrier and its sealing ability. To properly compute the bentonite degree of saturation the differences between the microstructural and macrostructural water density have to be taken into account, and this is essential for the proper estimation of the time needed for full saturation of the barrier. In any case, the water content changes evidenced the slowing down of the hydration rate over time, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Homogenization of unsaturated bentonite during hydration

  • Gens Solé, Antonio
  • Barboza de Vasconcelos, Ramón
  • Rodríguez Romero, Carlos Eduardo
  • Vaunat, Jean
  • Villar Galicia, María Victoria
Bentonite barriers are a key component in may designs of deep geological repositories for high level nuclear waste. During the hydration stage, the bentonite undergoes non-uniform changes in dry density that may persist even after reaching a fully saturated state. Since dry density controls the properties of the bentonite that ensure the functions of safety of the barrier, the potential of bentonite for homogenization or otherwise is a matter of high relevance. The paper presents the results and the analyses of two hydration tests on initially heterogenous samples, especially designed to explore the phenomena and processes underlying the homogenisation of bentonite materials. The formulation and constitutive model used in the analyses are briefly presented followed by a description of the tests. Subsequently, the experimental dataobtained from the tests are discussed together with the results of the hydromechanical analyses performed. Particular attention is given to the degree of homogenization of the specimens achieved at the end of the tests. The simulations have resulted in a very satisfactory agreement with test observations, especially egarding the final state of the samples, thus enhancing the confidence in the numerical tool employed., The work presented has been developed in the framework of the Bentonite Mechanical Evolution Project (BEACON). The project receives funding from the Euratom research and training programme 2014-2018 under grant agreement No 745942. The support of Conacyt (Id. no. 710153) to the third author is also gratefully acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical modelling of unsaturated bentonite subjected to different hydro-mechanical stress paths, Modélisation numérique de bentonite insaturée soumise à différents chemins de contraintes hydromécaniques

  • Rodríguez Romero, Carlos Eduardo
  • Gens Solé, Antonio
  • Barboza de Vasconcelos, Ramón
  • Vaunat, Jean
Bentonite-based materials such as MX-80 bentonite have been considered for their use as engineered barriers (EB) in deep radioactive waste geological repositories, mainly due to their low permeability, swelling pressure, and radionuclide retention properties. To ensure their integrity and to know their influence, different hydro-mechanical stress paths must be assessed. The European project BEACON (Bentonite Mechanical Evolution), addressed the behavior of MX-80 bentonite subjected to different conditions including these laboratory hydration tests carried out by EPFL (Lausanne, Switzerland). The experiments consist of the use of granular MX-80 bentonite in the as-poured state subjected to hydration, simulating the EB concept. For the fulfillment of the task, the constitutive response of the model is evaluated, decreasing the suction linearly to zero from its initial value simultaneously in the entire domain of analysis. A purely mechanical constitutive model calculation and noflow conditions are enforced to probe the predictive power of the proposed numerical model. The paper presents a comparison between these numerical simulations and the laboratory test data showing satisfactory results., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling the hydration of bentonites under isothermal and non-isothermal conditions using a double-porosity approach

  • Pacelli, Rubem Vasconcelos
  • Gens Solé, Antonio
  • Rodríguez Romero, Carlos Eduardo
  • Vaunat, Jean
The constitutive model for expansive materials described here follows the usual double-porosity approach that represents the clay soil as two overlapping pore media (microstructure and macrostructure) coupled through a micro-macro strain mechanism. However, the current formulation also includes a local water mass transfer controlling the saturation of the microstructure, the definition of water retention curves for each structural level, and the occurrence of thermal strains in both pore domains. These additional features enhance the model's ability to simulate the response of bentonites under varying moisture conditions. This double-porosity model satisfactorily simulated some infiltration tests taken from the literature, reproducing the main test observations and validating its use for predicting the behaviour of bentonites in various geotechnical engineering scenarios. The infiltration tests selected were carried out in columns made of FEBEX and MX-80 bentonites under isothermal and non-isothermal conditions to characterize the main hydro-mechanical and thermo-hydro-mechanical processes that occur within a bentonite barrier hydrated under confined conditions. The numerical simulations showed that structural changes in bentonite materials during the transient hydration phase are due to the irreversible response of the macrostructure (changes in macroporosity) but also depend on the mechanisms controlling the saturation of the microstructure., The work presented in this paper was developed in the framework of the Bentonite Mechanical Evolution Project (BEACON) and the European Joint Programme on Radioactive Waste Management (EURAD-HITEC) and received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement N◦ 745942 and from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement n◦ 847593, respectively. The support of Conacyt (Id. N◦ 710153) to the third author is gratefully acknowledged. The financial and technical support of ENRESA is also gratefully acknowledged., Peer Reviewed, Postprint (published version)