Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 61
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Bentonite powder XRD quantitative analysis using Rietveld refinement: Revisiting and updating bulk semiquantitative mineralogical compositions

  • Cuevas Rodríguez, Jaime Fernando
  • Cabrera, Miguel Angel
  • Fernández, Carlos
  • Mota Heredia, Carlos
  • Fernández Martín, Raúl
  • Torres, Elena
  • Turrero, María Jesús
  • Ruiz García, Ana Isabel
Bentonite is a claystone formed by a complex mineralogical mixture, composed of mont-morillonite, illite, and accessory minerals like quartz, cristobalite, feldspars, carbonates, and minor amounts of iron oxy-hydroxides. Bentonite presents complexity at various scales: (1): a single mineral may present different chemical composition within the same quarry (e.g., feldspars solid solu-tions); (2): montmorillonite presents variability in the cation-exchange distribution while illite may be presented as mixed-layer with smectite sheets; and (3): hardness and crystal size are larger in accessory minerals than in clay minerals, preventing uniform grinding of bentonite. The FEBEX bentonite used is originally from Almería (Spain), and it is a predominantly calcium, magnesium, and sodium bentonite. This Spanish FEBEX bentonite has been hydrothermally altered at laboratory scale for 7–14 years. A thermal gradient was generated by heating a disk of pressed iron powder, simulating the metal waste canister, in contact with the compacted bentonite sample. Hydration was forced from the opposite direction. XRD recorded patterns were very similar. In order to min-imize the bias of XRD semi-quantitative determination methods, Rietveld refinement was per-formed using BGMN software and different structural models. Confidence in the quantification of the main phases allows us to convincingly detect other subtle changes such as the presence of calcite in the hydration front, right at the interface between the saturated and unsaturated bentonite, or the presence of goethite, and not hematite, in the saturated bentonite, near the source of hydration. Smectite component was 72 ± 3% and the refinement was consistent with the presence of ~10% illite, comparable with previous characterizations
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Reactive transport models of the geochemical interactions at the iron/bentonite interface in laboratory corrosion tests

  • Mon, Alba
  • Samper, Javier
  • Montenegro, Luis
  • Turrero, María Jesús
  • Torres, Elena
  • Cuevas Rodríguez, Jaime Fernando
  • Fernández Martín, Raúl
  • Windt, Laurent de
Carbon steel and compacted bentonite have been proposed as candidate materials for the overpack and buffer, respectively, of the multi-barrier system of a geological high-level radioactive waste repository. Carbon steel corrosion may impair bentonite properties. The interactions of corrosion products and bentonite are analyzed with laboratory corrosion tests. Here coupled thermo-hydro-chemical-mechanical (THCM) models of two types of heating and hydration tests performed on compacted bentonite in contact with Fe powder are presented to study the iron-bentonite interactions at representative repository conditions. Tests on small cells (SC) were performed under unsaturated non-isothermal conditions in 25 mm long columns containing 21 mm of bentonite and 4 mm of Fe powder. Tests on medium-size cells (FB) were performed under unsaturated non-isothermal conditions in 99.8 mm long columns containing 86.8 mm of bentonite and 13 mm of Fe powder. Model results for the SC tests showed that magnetite and Fe(OH)2(s) were the main corrosion products which compete for Fe2+ precipitation. Computed corrosion products precipitate mainly in the Fe powder, penetrate a few mm into the bentonite and reproduce the measured iron weight data. Model results of the FB tests showed that magnetite precipitates throughout the Fe powder interface and reproduce the main trends of the corrosion products. Model results of these corrosion tests will be of great relevance for the performance assessment of engineered barriers of radioactive waste repositories, The research leading to these results was funded by ENRESA within the Work Package ACED of EURAD (European Joint Programme on Radioactive Waste Management of the European Union, grant agreement nº 847593), the Spanish Ministry of Science and Innovation (PID2019-109544RB-I00) and the Galician Regional Government (Grant ED431C2021/54). The comments and corrections of the special editor and the two anonymous reviewers are greatly appreciated
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Mineralogy and Geochemistry of a Bentonite Pellets Column Heated for 10 years

  • Villar, M. V.
  • Cuevas Rodríguez, Jaime Fernando
  • Zabala, A. B.
  • Ortega Martos, María Almudena
  • Melón, A. M.
  • Iglesias, R. J.
  • Ruiz García, Ana Isabel
A common design of a high-level radioactive waste (HLW) disposal system consists of the waste canisters emplaced in tunnels or shafts, with the space between the heat-emitting canisters and the surrounding rock filled with a bentonite-based material. Understanding the behavior of this barrier, in particular the effect of prolonged heating on its properties, is important to assess the barrier’s long-term performance. The objective of the present study was to add to this understanding and to supply experimental data about the state of bentonite hydrated and heated for a long period of time. To that end, a 50 cm long column of Wyoming-type bentonite pellets was heated at its base at 140 °C (simulating the waste canister) while a synthetic sodium-chloride-rich groundwater including sulfate, calcium, and magnesium was supplied through its upper surface for almost 10 y. At the end of the experiment the upper half of the column was saturated, but in the lower half the water content decreased sharply toward the heater, where it was close to 0%. No relevant mineralogical changes occurred, and the main component of the bentonite continued to be a predominantly sodium montmorillonite with no structural changes with respect to the initial one. In the area where the temperatures were >60°C and the material very dry, however, the smectite was not able to completely develop the 1-layer hydrate after 48 h of stabilization at RH 55%, although its expandability was fully recovered when the smectite was hydrated with liquid water. The ions solubilized as a result of the water-content increase were transported toward the heater and concentrated in two distinct areas: sodium and calcium chlorides closer to the heater than calcium and sodium sulfates. At the heater contact, the bentonite microstructure was of dense packets with carbon and Na-S-coated cavities. Precipitation of calcite and calcium sulfates and possibly dissolution of silica minerals also took place close to the heater, The research leading to these results was performed in the framework of the EURAD project – WP7HITEC (http://www.ejp-eurad.eu/), which receives funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No 847593. The laboratory work was carried out at CIEMAT’s facilities by A.E. González
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Dual effect of Se(IV) and bentonite microbial community interactions on the corrosion of copper and Se speciation: Implication on repository safety assessment

  • Martínez-Moreno, Marcos F.
  • Povedano Priego, Cristina
  • Morales Hidalgo, Mar
  • Mumford, Adam D.
  • Lazuen-Lopez, Guillermo
  • Aranda Ballesteros, Elisabet|||0000-0001-5915-2445
  • Vílchez-Vargas, Ramiro
  • Solari, Pier L.
  • Ju-Nam, Yon
  • Jroundi, Fadwa|||0000-0002-6532-1441
  • Ojeda, Jesús J.
  • Merroun, Mohamed Larbi|||0000-0003-4553-5976
The present work was supported by the grant RTI2018–101548-B-I00 “ERDF A way of making Europe” to MLM from the “Ministerio de Ciencia, Innovación y Universidades” (Spanish Government). The project leading to this application has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 847593 to MLM. ADM acknowledges funding from the UK Engineering and Physical Sciences Research Council (EPSRC) DTP scholarship (project reference: 2748843)., The Deep Geological Repository (DGR) design, the internationally safest option for the long-term disposal of high-level radioactive waste (HLW), features metal canisters encased in compacted bentonite clay and embedded deep within a host rock. Despite presenting a hostile environment for microorganisms, DGRs scenarios with favorable microbial-activity conditions must be considered for the safety assessment of this disposal. This study investigated the impact of Se(IV), as a natural analogue of 79Se present in the HLW, in anoxic microcosms of bentonite slurry spiked with a bacterial consortium and amended with lactate, acetate, and sulfate as electron donors/acceptor. The addition of the bacterial consortium promoted the rate of Se(IV) reduction to Se(0), while the tyndallization (heat-shock) of bentonite slowed this process. Se(IV) reduced the relative abundance of most genera of sulfate-reducing bacteria (SRB), while stimulating the abundance of Se-tolerant bacteria, which played an important role in Se(IV) reduction. Moreover, it was observed that lactate was the preferred electron donor, linking to the production and subsequent consumption of acetate. X-ray absorption spectroscopy (XAS) and high- resolution transmission electron microscopy (HRTEM) revealed the reduction of Se(IV) forming amorphous Se(0) nanospheres. In addition, HRTEM showed that the biogenic Se(0) undergo a biotransformation to more stable crystalline forms, contributing to the immobilization of Se in the case of HLW release. Additionally, the sulfide generated by the activity of SRB reacted with Cu producing corrosion products (Cu x S) on the surface of the copper material., “ERDF A way of making Europe” RTI2018–101548-B-I00, Spanish Government, European Union's Horizon 2020, 847593, UK Engineering and Physical Sciences Research Council (EPSRC) 2748843
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Long-term tracking of the microbiology of uranium-amended water-saturated bentonite microcosms: A mechanistic characterization of U speciation

  • Morales Hidalgo, Mar
  • Povedano Priego, Cristina
  • Martinez-Moreno, Marcos F.
  • Ojeda, Jesus J.
  • Jroundi, Fadwa|||0000-0002-6532-1441
  • Merroun, Mohamed Larbi|||0000-0003-4553-5976
Deep geological repositories (DGRs) stand out as one of the optimal options for managing high-level radioactive waste (HLW) such as uranium (U) in the near future. Here, we provide novel insights into microbial behavior in the DGR bentonite barrier, addressing potential worst-case scenarios such as waste leakage (e.g., U) and groundwater infiltration of electron rich donors in the bentonite. After a three-year anaerobic incubation, Illumina sequencing results revealed a bacterial diversity dominated by anaerobic and spore-forming microorganisms mainly from the phylum Firmicutes. Highly U tolerant and viable bacterial isolates from the genera Peribacillus, Bacillus, and some SRB such as Desulfovibrio and Desulfosporosinus, were enriched from U-amended bentonite. The results obtained by XPS and XRD showed that U was present as U(VI) and as U(IV) species. Regarding U(VI), we have identified biogenic U(VI) phosphates, U(UO2)·(PO4)2, located in the inner part of the bacterial cell membranes in addition to U(VI)-adsorbed to clays such as montmorillonite. Biogenic U(IV) species as uraninite may be produced as result of bacterial enzymatic U(VI) reduction. These findings suggest that under electron donor-rich water-saturation conditions, bentonite microbial community can control U speciation, immobilizing it, and thus enhancing future DGR safety if container rupture and waste leakage occurs., This study was supported by the grant RTI2018-101548-B-I00 “ERDF A way of making Europe” to MLM from the “Ministerio de Ciencia, Innovación y Universidades” (Spanish Government). The project leading to this application has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 847593 to MLM and the grant FPU20/00583 to the first author from the “Ministerio de Universidades” (Spanish Government).
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Tesis doctoral (DoctoralThesis)

Explorando el papel de los microorganismos y parámetros fisicoquímicos en los procesos biogeoquímicos en la interfaz contenedor de cobre/bentonita/selenio: con vistas a un almacenamiento geológico profundo de residuos radiactivos, Exploring the role of microorganisms and physicochemical parameters on the biogeochemical processes at the metal container/bentonite/selenium interface: in view of a Deep Geological Repository of nuclear waste

  • Martínez Moreno, Marcos Felipe
Tesis Univ. Granada., Promoción de Empleo Joven e Implantación de la Garantía Juvenil en I+D+i del Ministerio de Ciencia e Innovación (ref. PEJ2018‐ 003299‐A), Proyecto del Plan Nacional “Impacto de los procesos microbianos en la interface contenedor de cobre-bentonita compactada y sus efectos sobre la movilización del selenio” (ref. RTI2018-101548-B-I00) financiado por el Ministerio de Ciencia, Innovación y Universidades, Proyecto Europeo “EURAD - European Joint Programme on Radioactive Waste Management” (ref. 847593, EURATOM - NFRP- 2018) financiado por la Comisión Europea, Erasmus Prácticas (Erasmus+) del Vicerrectorado de Estudiantes de la Universidad de Granada, FEMS Research and Training Grant (FEMS-GO-2021-077)
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Microbial influence in Spanish bentonite slurry microcosms: Unveiling a-year long geochemical evolution and early-stage copper corrosion related to nuclear waste repositories

  • Martinez-Moreno, Marcos F.
  • Povedano Priego, Cristina
  • Morales Hidalgo, Mar
  • Mumford, Adam D.
  • Aranda Ballesteros, Elisabet|||0000-0001-5915-2445
  • Vilchez-Vargas, Ramiro
  • Jroundi, Fadwa|||0000-0002-6532-1441
  • Ojeda, Jesus J.
  • Merroun, Mohamed Larbi|||0000-0003-4553-5976
The deep geological repository (DGR) concept consists of storing radioactive waste in metal canisters, surrounded by compacted bentonite, and placed deeply into a geological formation. Here, bentonite slurry microcosms with copper canisters, inoculated with bacterial consortium and amended with acetate, lactate and sulfate were set up to investigate their geochemical evolution over a year under anoxic conditions. The impact of microbial communities on the corrosion of the copper canisters in an early-stage (45 days) was also assessed. The amended bacterial consortium and electron donors/acceptor accelerated the microbial activity, while the heatshocked process had a retarding effect. The microbial communities partially oxidize lactate to acetate, which is subsequently consumed when the lactate is depleted. Early-stage microbial communities showed that the bacterial consortium reduced microbial diversity with Pseudomonas and Stenotrophomonas dominating the community. However, sulfate-reducing bacteria such as Desulfocurvibacter, Anaerosolibacter, and Desulfosporosinus were enriched coupling oxidation of lactate/acetate with reduction of sulfates. The generated biogenic sulfides, which could mediate the conversion of copper oxides (possibly formed by trapped oxygen molecules on the bentonite or driven by the reduction of H2O) to copper sulfide (Cu2S), were identified by X-ray photoelectron spectroscopy (XPS). Overall, these findings shed light on the ideal geochemical conditions that would affect the stability of DGR barriers, emphasizing the impact of the SRB on the corrosion of the metal canisters, the gas generation, and the interaction with components of the bentonite., The present work was supported by the grant RTI 2018–101548-BI00 “ERDF A way of making Europe” to MLM from the “Ministerio de Ciencia, Innovación y Universidades” (Spanish Government). The project leading to this application has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 847593 to MLM
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Digitalisation for nuclear waste management: predisposal and disposal

  • Kolditz, Olaf
  • Jacques, Diederik
  • Claret, Francis
  • Bertrand, Johan
  • Churakov, Sergey V.
  • Debayle, Christophe
  • Diaconu, Daniela
  • Fuzik, Kateryna
  • García-Cobos, D.
  • Graebling, Nico
  • Grambow, Bernd
  • Holt, Erika
  • Idiart, Andrés
  • Leira, Petter
  • Montoya, Vanessa
  • Niederleithinger, Ernst
  • Olin, Markus
  • Pfingsten, Wilfried
  • Prasianakis, Nikolaos
  • Rink, Karsten
  • Samper, Javier
  • Szöke, István
  • Szöke, Réka
  • Theodon, Louise
  • Wendling, Jacques
[Abstract:] Data science (digitalisation and artificial intelligence) became more than an important facilitator for many domains in fundamental and applied sciences as well as industry and is disrupting the way of research already to a large extent. Originally, data sciences were viewed to be well-suited, especially, for data-intensive applications such as image processing, pattern recognition, etc. In the recent past, particularly, data-driven and physics-inspired machine learning methods have been developed to an extent that they accelerate numerical simulations and became directly usable for applications related to the nuclear waste management cycle. In addition to process-based approaches for creating surrogate models, other disciplines such as virtual reality methods and high-performance computing are leveraging the potential of data sciences more and more. The present challenge is utilising the best models, input data and monitoring information to integrate multi-chemical-physical, coupled processes, multi-scale and probabilistic simulations in Digital Twins (DTw) able to mirror or predict the performance of its corresponding physical twins. Therefore, the main target of the Topical Collection is exploring how the development of DTw can benefit the development of safe, efficient solutions for the pre-disposal and disposal of radioactive waste. A particular challenge for DTw in radioactive waste management is the combination of concepts from geological modelling and underground construction which will be addressed by linking structural and multi-physics/chemistry process models to building or tunnel information models. As for technical systems, engineered structures a variety of DTw approaches already exist, the development of DTw concepts for geological systems poses a particular challenge when taking the complexities (structures and processes) and uncertainties at extremely varying time and spatial scales of subsurface environments into account., This work has been financed within the framework of EURAD, the European Joint Programme on Radioactive Waste Management (Grant Agreement No 847593) and PREDIS (Pre-disposal management of radioactive waste, Euratom research and training programme, grant agreement No 945098). The contribution of Javier Samper (UDC) was partly funded by Project PID2019-109544RB-I00). These supports are gratefully acknowledged., Open Access funding enabled and organized by Projekt DEAL.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Digitalization and Digital Twins in Long Term Management of Radioactive Waste

  • Jacques, Diederik
  • Kolditz, Olaf
  • Szöke, István
  • Churakov, Sergey V.
  • García-Cobos, D.
  • Laloy, Eric
  • Montoya, Vanessa
  • Prasianakis, Nikolaos
  • Samper, Javier
[Abstract:] Digitalization and Artificial Intelligence is the fastest emerging paradigms in engineering and natural science applications. As an example data-driven and physics-inspired machine learning methods have been developed and evaluated to accelerate numerical simulations; evaluating their usability for applications related to the radioactive waste management cycle is therefore of high relevance. Under the umbrella of the European Joint Programme on Radioactive Waste Management (EURAD) and on Pre-disposal Management of Radioactive Waste (PREDIS), different initiatives have been established to facilitate evaluation and implementation of digitalization technologies (and specifically digital twins mirroring their corresponding physical assets) for long-term radioactive waste management. Previous studies indicate that digitalization is an important tool, to improve processes throughout the whole waste management cycle including pre-disposal activities like waste treatment, conditioning, storage and aspects related to the operation and long-term performance of disposal systems. However, before implementation, several challenges related to different facets of digital twins and digitalization need further research. At this stage, the specific potential and role of different aspects of digital transformation for different topics of waste management is still somewhat vague. In this contribution, an overview will be given addressing selected research developments s based on activities that are ongoing in EURAD and PREDIS or in closely related activities., This project has received funding from the Euratom research and training programme 2019-2020 under grant agreement No 945098. Results reported in section 3 are funded in the framework of EURAD (Grant Agreement No 847593). The Authors sincerely thank Tom-Robert Bryntesen, Hans-Olav Randem, Svein-Tore Edvardsen and Réka Szőke for their contribution to the developments in the PREDIS project discussed under section 4.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Position paper on high fidelity simulations for coupled processes, multi-physics and chemistry in geological disposal of nuclear waste

  • Churakov, Sergey V.
  • Claret, Francis
  • Idiart, Andrés
  • Jacques, Diederik
  • Govaerts, Joan
  • Kolditz, Olaf
  • Prasianakis, Nikolaos
  • Samper, Javier
[Abstract:] This opinion paper describes the major coupled T(Thermal)-H(Hydro)-M(Mechanical)-C(Chemical) processes in geological repository systems and the frontier of related model development. Particular focus is made on the analysis of existing approaches and open research questions with respect to the further development of coupled codes and models for realistic multi-scale simulations of repository systems. These include the use of machine learning and artificial intelligence in acceleration of computer codes; sensitivity analysis, inverse modelling and optimisation; software engineering and collaborative platforms for model development., This work has been financed within the framework of EURAD, the European Joint Programme on Radioactive Waste Management (Grant Agreement No 847593) and PREDIS (Pre-disposal management of radioactive waste, Euratom research and training programme, grant agreement No 945098). Funding was also provided by ENRESA, the Spanish Ministry of Science and Innovation (TED2021-130315B-I00, NextGenerationEU) PID2023-153202OB-I00), the Galician Regional Government (Grant ED431C2021/54), and Nagra, the National Cooperative for the Disposal of Radioactive Waste. Authors especially acknowledge the developments conducted in EURAD WPs ACED, DONUT, FUTURE & MAGIC. We appreciate the comments, suggestions and corrections of the two anonymous reviewers, which contributed to improve the manuscript., Xunta de Galicia; ED431C2021/54
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A non-isothermal reactive transport model of the long-term geochemical evolution at the disposal cell scale in a HLW repository in granite

  • Montenegro, Luis
  • Samper, Javier
  • Mon, Alba
  • De Windt, Laurent
  • García, Enrique
  • Samper, Aurora C.
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] The assessment of the long-term performance of the engineered barrier systems of high-level radioactive waste (HLW) repositories requires the use of reactive transport models. Here a non-isothermal reactive transport model of the long-term geochemical evolution of a HLW disposal cell in a granitic host rock is presented. The model includes the vitrified waste (40 cm in diameter), the carbon-steel canister (5 cm thick), the saturated FEBEX bentonite buffer (75 cm thick) and the reference granitic rock. The model accounts for the thermal transient stage and assumes generalized steel corrosion under anaerobic conditions with a corrosion rate equal to 1.41 m/y. Canister failure is assumed to occur when the remaining canister thickness is equal to 3.5 cm at t = 25,000 years. Canister corrosion caused an increase in pH. The computed pH in the canister just before canister failure (t = 25,000 years) was equal to 9.25 and ranged from 7.82 to 9.25 in the bentonite. Magnetite, the main corrosion product, precipitated in the bentonite and especially in the canister. The thickness of magnetite precipitation band in the bentonite was 1 cm. Siderite precipitated at both sides of the canister/bentonite interface. The precipitation front penetrated >1 cm into the bentonite. Nuclear glass started dissolving after canister failure (t > 25,000 years). The concentration of dissolved silica increased in the inner part of the glass until t = 30,000 years and decreased in the outer part of the glass due to the out diffusion of dissolved silica into the canister and the bentonite. This diffusive flux caused the precipitation of greenalite at the glass/canister and canister/bentonite interfaces. The pH at the end of the simulation (t = 50,000 years) ranged from 7.93 to 7.89 in the glass, from 7.89 to 8.66 in the canister and from 7.87 to 8.6 in the bentonite. Magnetite precipitated in the canister while there was carbon steel to corrode. Once the canister was fully corroded, magnetite redissolved near the glass/canister interface. Greenalite precipitated in the canister and the bentonite, especially at the glass/canister interface and siderite precipitated at the canister/bentonite interface. The simulation results should be useful for the performance assessment of engineered barriers of radioactive waste repositories in granitic host rocks., The research leading to these results was funded by ENRESA within the Work Package ACED of EURAD (European Joint Programme on Radioactive Waste Management of the European Union, EC grant agreement nº 847593), the Spanish Ministry of Science and Innovation (PID2019-109544RB-I00) and the Galician Regional Government (Grant ED431C2021/54). Funding for open access charge was provided by Universidade da Coru˜na/CISUG. We thank Diederik Jacques, leader of the ACED Work Package, and the ACED members for many enriching discussions, suggestions and recommendations, Erika Neeft (COVRA) for providing the temperature curves, and the special editor and the two anonymous reviewers for their comments and corrections., Xunta de Galicia; ED431C2021/54
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Continuous and discrete adjoint state formulations of conservative and reactive solute transport in porous media

  • Core Samper, A.
  • Samper, Javier
  • Mon, Alba
  • Yang, Changbing
  • Lentijo, F.
[Resumen:] El método del estado adjunto (AS) es comúnmente utilizado para calcular las derivadas locales de la función objetivo del problema inverso de la estimación automática de los parámetros de modelos numéricos de flujo y transporte de solutos y para calcular las sensibilidades de los resultados de los modelos a variaciones de sus parámetros. El método AS se puede aplicar: (a) Al problema original (método continuo) o (b) A la versión discretizada del problema original (método discreto). El método AS continuo consiste en obtener las ecuaciones del estado adjunto a partir de las ecuaciones en derivadas parciales del problema original y, posteriormente, resolver numéricamente dichas ecuaciones. El método AS discreto consiste en obtener las ecuaciones del estado adjunto directamente a partir de las ecuaciones discretizadas del problema original. Este trabajo presenta la formulación del estado adjunto continuo y discreto para el transporte de solutos conservativos y reactivos en medios porosos. Se incluye la descripción de los dos métodos, el análisis de sus propiedades y la comparación de ambas versiones así como su aplicación a sistemas multicomponente de solutos conservativos y sistemas reactivos con reacciones de disolución/precipitación de minerales y de intercambio catiónico., [Abstract:] The adjoint state (AS) method is commonly used for calculating local derivatives of objective functions in the solution of the inverse problem of parameter estimation and computing model sensitivities for water flow and solute transport. The AS method can be applied to: (a) The continuous version of the original problem (continuous AS method) and (b) The discretized form of the original problem (discrete AS method). The continuous AS method consists on deriving the AS equations from the partial differential equations (PDEs) of the original problem and then solving numerically the resulting PDEs of the AS. The discrete adjoint state method consists on obtaining the discretized AS equations directly from the discretized equations of the original problem. Here we present the formulation of both the continuous and discrete AS for conservative solute transport in porous media. The methods are described and the properties of both continuous and discrete AS formulations are analysed and compared. We also present the AS equations for multicomponent reactive systems with mineral dissolution/precipitation and cation exchange reactions., Acknowledgements. The research leading to these results was funded by ENRESA through a Research Contract within the Work Package DONUT of EURAD (European Joint Programme on Radioactive Waste Management of the European Union, Grant Agreement, 847593). The work was partly funded also by the Spanish Ministry of Economy and Competitiveness (Project PID2019-109544RB-I00) and the Galician Regional Government (Grant number ED431C2021/54 from “Consolidación e estruturación de unidades de investigación competitivas”). We acknowledge Carlos López for his support and comments., Xunta de Galicia; ED431C2021/54
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Reactive transport models of the geochemical interactions at the iron/bentonite interface in laboratory corrosion tests

  • Montenegro, Luis
  • Samper, Javier
  • Mon, Alba
  • De Windt, Laurent
  • Torres, Elena
  • Cuevas, Jaime
  • Fernández, Raúl
  • Turrero, María J.
[Abstract:] Carbon steel and compacted bentonite have been proposed as candidate materials for the overpack and buffer, respectively, of the multi-barrier system of a geological high-level radioactive waste repository. Carbon steel corrosion may impair bentonite properties. The interactions of corrosion products and bentonite are analyzed with laboratory corrosion tests. Here coupled thermo-hydro-chemical-mechanical (THCM) models of two types of heating and hydration tests performed on compacted bentonite in contact with Fe powder are presented to study the iron-bentonite interactions at representative repository conditions. Tests on small cells (SC) were performed under unsaturated non-isothermal conditions in 25 mm long columns containing 21 mm of bentonite and 4 mm of Fe powder. Tests on medium-size cells (FB) were performed under unsaturated non-isothermal conditions in 99.8 mm long columns containing 86.8 mm of bentonite and 13 mm of Fe powder. Model results for the SC tests showed that magnetite and Fe(OH)2(s) were the main corrosion products which compete for Fe2+precipitation. Computed corrosion products precipitate mainly in the Fe powder, penetrate a few mm into the bentonite and reproduce the measured iron weight data. Model results of the FB tests showed that magnetite precipitates throughout the Fe powder interface and reproduce the main trends of the corrosion products. Model results of these corrosion tests will be of great relevance for the performance assessment of engineered barriers of radioactive waste repositories., The research leading to these results was funded by ENRESA within the Work Package ACED of EURAD (European Joint Programme on Radioactive Waste Management of the European Union, grant agreement nº 847593), the Spanish Ministry of Science and Innovation (PID2019-109544RB-I00) and the Galician Regional Government (Grant ED431C2021/54). The comments and corrections of the special editor and the two anonymous reviewers are greatly appreciated., Xunta de Galicia; ED431C2021/54
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Modelling of the long-term evolution and performance of engineered barrier system

  • Claret, Francis
  • Dauzeres, Alexandre
  • Jacques, Diederik
  • Sellin, Patrik
  • Cochepin, Benoit
  • De Windt, Laurent
  • Garibay-Rodríguez, Jaime
  • Govaerts, Joan
  • Leupin, Olivier
  • Mon, Alba
  • Montenegro, Luis
  • Montoya, Vanessa
  • Prasianakis, Nikolaos
  • Samper, Javier
  • Talandier, Jean
Euratom Research and Training in 2022: challenges, achievements and future perspectives, [Abstract:] Components of the so-called “multiple-barrier system” from the waste form to the biosphere include a combination of waste containers, engineered barriers, and natural barriers. The Engineered Barrier System (EBS) is crucial for containment and isolation in a radioactive waste disposal system. The number, types, and assigned safety functions of the various engineered barriers depend on the chosen repository concept, the waste form, the radionuclides waste inventory, the selected host rock, and the hydrogeological and geochemical settings of the repository site, among others. EBS properties will evolve with time in response to the thermal, hydraulic, mechanical, radiological, and chemical gradients and interactions between the various constituents of the barriers and the host rock. Therefore, assessing how these properties evolve over long time frames is highly relevant for evaluating the performance of a repository system and safety function evaluations in a safety case. For this purpose, mechanistic numerical models are increasingly used. Such models provide an excellent way for integrating into a coherent framework a scientific understanding of coupled processes and their consequences on different properties of the materials in the EBS. Their development and validation are supported by R&D actions at the European level. For example, within the HORIZON 2020 project BEACON (Bentonite mechanical evolution), the development, test, and validation of numerical models against experimental results have been carried out in order to predict the evolution of the hydromechanical properties of bentonite during the saturation process. Also, in relation to the coupling with mechanics, WP16 MAGIC (chemo Mechanical AGIng of Cementitious materials) of the EURAD Joint Programming Initiative focuses on multi-scale chemo-mechanical modeling of cementitious-based materials that evolve under chemical perturbation. Integration of chemical evolution in models of varying complexity is a major issue tackled in the WP2 ACED (Assessment of Chemical Evolution of ILW and HLW Disposal cells) of EURAD. WP4 DONUT (Development and improvement of numerical methods and tools for modeling coupled processes) of EURAD aims at developing and improving numerical models and tools to integrate more complexity and coupling between processes. The combined progress of those projects at a pan-European level definitively improves the understanding of and the capabilities for assessing the long-term evolution of engineered barrier systems., Euratom research and training program 2014–2018; 745942, Ministerio de Ciencia e Innovación; PID2019-109544RB-I00
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Geochemical interactions at the steel-bentonite interface caused by a hydrothermal gradient

  • Mota Heredia, Carlos
  • Cuevas Rodríguez, Jaime Fernando
  • Ortega, Almudena
  • Torres, Elena
  • Turrero, María Jesús
  • Fernández Martín, Raúl
  • Ruiz García, Ana Isabel
Bentonites are used in deep geological disposal facilities as an engineered barrier to isolate high level radioactive waste, contained in metallic canisters. The present study, performed at laboratory scale, evaluated the behaviour of MX-80 (Na-bentonite) and FEBEX (Ca-Mg-Na-bentonite) in contact with carbon steel, subjected to a hydrothermal gradient. A dominant Na-Cl-SO4 saline solution was injected towards the compacted bentonite from the top, while a heater, located at the bottom in contact with the steel disc, maintained a constant temperature of 100 °C. The cells were studied after one and six months of interaction. Changes in the physical (water content and specific surface area) and chemical (cation exchange capacity and element distribution) properties of the bentonite were observed, as well as the formation of a corrosion layer on the steel, at the interface with bentonite, mainly composed of magnetite, maghemite and hematite. The bentonites were mainly altered at the mm scale, being enriched in iron content, and changing their ion distribution to Ca-dominant smectite (in MX-80 bentonite), This project has received funding from the European Union’s Horizon 2020 research and innovation programme 2014-2018 under grant agreement N◦847593
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Geochemical evolution of mg-bentonite affected by the contact of carbon steel and a hydrothermal gradient

  • Mota Heredia, Carlos
  • Cuevas Rodríguez, Jaime Fernando
  • Fernández Martín, Raúl
Publisher source must be acknowledged with citation, Carbon steel and bentonite are materials selected as engineered barriers for high-level radioactive waste confinement. Their long-term interaction must be evaluated to confirm the barrier’s stability. Three laboratory experiments of the carbon steel—Mg-bentonite interaction were conducted for 1, 6, and 22 months under a hydrothermal gradient. Changes in bentonite’s water content, specific surface area, and cation exchange capacity were measured. Mineralogy was studied by X-ray diffraction and scanning electron microscopy. The redistribution of aqueous species and the redox state of iron were determined across the bentonite columns. Results indicated water saturation after 22 months. The specific surface area of bentonite was reduced near contact with the steel, while the cation exchange capacity mostly decreased at 3–6 mm from the steel interface. The corrosion rate decreased with time and bentonite enriched in Fe in the first 1.5 mm from the steel contact. The formation of new Fe-bearing minerals, such as di-tri ferri-sudoite, magnetite, hematite, maghemite, lepidocrocite, siderite and ankerite was observed. Aqueous species redistributed in the porewater of bentonite with decreasing concentrations of Fe and Cl as a function of time and increasing concentrations of Na, Ca and SO4 after 22 months. This occurs under conditions where the bentonite is saturated with Mg, which conditioned the formation and nature of iron clay minerals with time, This research has been developed by the UAM AcMe research group to support the WP.2 EURAD-ACED project results, which has received funding from the European Union\u2019s Horizon 2020 research and innovation program under grant agreement No. 847593
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemo-hydro-mechanical effects of CO2 injection on reservoir and seal rocks: A review on laboratory experiments

  • Vafaie, Atefeh
  • Cama, Jordi
  • Soler, Josep M.
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
Geological carbon storage is one of the technologies required to arrive at the ambitious yet realistic net-zero emission target and climate change neutrality. Injected CO2 in geological formations acidifies the resident brine, inducing chemical reactions with the minerals. Reactions may alter the hydraulic and mechanical properties of the rock and have an impact on reservoir and wellbore integrity, reservoir injectivity, long-term compaction and caprock sealing capacity. We provide a comprehensive review of chemo-hydro-mechanical (CHM) effects of CO2 on the reservoir and sealing rocks, either intact or fractured, which have been studied through laboratory experiments under no-flow and open-flow conditions, i.e., batch and flow-through experiments. The hydraulic and mechanical rock properties affected by geochemical processes comprise (a) physical properties influencing the flow and transport of solutes (pore size distribution, porosity, permeability and fracture aperture and roughness), (b) multi-phase flow properties (capillary entry pressure and relative permeability), (c) mechanical characteristics, including stiffness (i.e., elastic moduli for intact rocks and normal stiffness for fractures), strength (cohesion, friction angle and fracture toughness), and poroelastic response (Biot's coefficient), and (d) time-dependent behavior of the rock (compaction creep). The experiments alone cannot capture the complex dynamics of CO2 flow underground, but they provide critical insights into short-term alteration mechanisms of rock with implications to geologic CO2 storage. Studying naturally altered rocks, extending the experiments to tens-of-meters-scale underground rock laboratories, and bringing together experimental observations and numerical simulations are valuable for the advance in the understanding of CHM processes and upscaling them across space and time., This work has received funding from European Joint Programme on Radioactive Waste Management, EJP-EURAD of the the European Union's Horizon 2020 Research and Innovation Programme 2014–2018 under agreement No. 847593, specifically from the WP MAGIC. I.R.K. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). I.R.K. also acknowledges support by the PCI2021-122077-2 B project (www.easygeocarbon.com) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. J.C. and J.M.S. also acknowledge funding from the Catalan Government through project 2017SGR1733. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S funded by MCIN/AEI/10.13039/501100011033). This research has been carried out within the framework of the activities of the Spanish Government through the “Maria de Maeztu Centre of Excellence” accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). Open access funding is provided by the Spanish National Research Council (CSIC). The authors acknowledge Dr. Nicolas Espinoza for providing source figures to prepare Fig. 9., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001198-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modelling of coupled thermo-hydro-mechanical processes in a nuclear waste repository considering a dual-structure constitutive law for the expansive clay buffer

  • Vilarrasa, Víctor
Trabajo presentado en NWS-RSO webinar on Coupled Process Modelling "Mathematical Models of Coupled Processes", celebrado el 23 de junio de 2022 y organizado por Nuclear Waste Services Research Support Office (RSO), This work has received funding from the European Union’s Horizon 2020 research and innovation programme 2014 2018 under grant agreement n 847593 specifically from the WP MAGIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemo-hydro-mechanical effects of CO<inf>2</inf> injection into a permeable limestone

  • Vafaie, Atefeh
  • Cama, Jordi
  • Soler, Josep M.
  • Grgic, D.
  • Vilarrasa, Víctor
CO2 storage in carbonate aquifers is a way to mitigate atmospheric CO2 emissions, but it leads to acid-producing reactions that may induce alterations in the rock pore structure and hydromechanical properties. To gain a better understanding of these changes in rock properties, percolation experiments under constant flow-rate conditions with (i) CO2-saturated water (PCO2 = 100 bar and T = 60 °C) and (ii) HCl solutions (P = 1 bar and T = 60 °C) were performed on centimetric cores of the grain-supported Pont du Gard Limestone (permeability about 10−14–10−13 m2). Effluent chemistry analyses, X-ray imaging, and measurements of the hydromechanical properties of intact and altered specimens were used to quantify acid-induced changes in the two acid-rock systems. Experimental results show that the rock dissolution patterns highly depend on the acid type and pore space heterogeneity. Under the flow conditions of these experiments, complete HCl dissociation (strong acid) and rapid HCl-rock reaction result in a compact dissolution pattern that only affects the hydromechanical properties of the core inlet. Conversely, partial dissociation of H2CO3 (weak acid) produces chemical reactions all along the core. Initial structural heterogeneities localize chemical reactions along preferential flow pathways, causing instabilities in the reaction front and wormhole formation, which markedly enhances permeability. A powerlaw relationship with a very large exponent (as high as 24) accounts for the variation in permeability as a function of porosity. Altered cores render both a significant attenuation in mechanical rock properties and ultrasonic velocities, which is reproduced using a Differential Effective Medium (DEM) homogenization approach. The high-pressure percolation experiments of this study using CO2-saturated water represent an extreme scenario of CO2-brine-rock interactions in carbonate reservoirs, which needs to be considered to improve the prediction and monitoring of the storage performance., This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme 2014-2018 under agreement No. 847593, specifically from the WP MAGIC. A.V. acknowledges funding from the University of Barcelona under Travel grants for Ph.D. students in Earth Sciences 2020. V.V. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). J.C. and J.M.S. also acknowledge funding from the Catalan Government through project 2017SGR1733. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S funded by MCIN/AEI/10.13039/501100011033). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033). Thanks are due to Jordi Bellés (IDAEA-CSIC), Laurent Schoumacker (GeoResources Laboratory) and Christophe Morlot (GeoResources Laboratory) for their help in conducting the percolation experiments, MICP and uniaxial compression tests, and XMCT imaging, respectively. The authors would also like to thank the thoughtful reviews by anonymous reviewers, which helped improve the quality of the article., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001198-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Experimental and numerical study of chemo-hydro-mechanical effects of CO2 injection on permeable limestone

  • Vafaie, Atefeh
Carbon capture and storage (CCS) in saline aquifers is a proven technology aimed at reducing atmospheric CO2 emissions and mitigating the climate change crisis. CO2 injection acidifies the formation water inducing mineral dissolution and alterations in the pore structure and hydromechanical properties of the rock, particularly in carbonate reservoirs with large contents of fast-reacting minerals. Improving the current understanding of the form, extent, and governing mechanisms of such interactions is central to optimizing and securing the implementation of CCS and serves as the primary goal of this study. To achieve this goal, this study combines (i) percolation experiments with CO2-saturated water and HCl solutions on cm-scale cores of highly permeable Pont du Gard Limestone and (ii) 3D Darcy-scale reactive transport simulations of the performed experiments. Effluent chemistry analyses, X-ray Micro Computed Tomography (XMCT) imaging, and measurements of the hydromechanical properties of intact and altered specimens are employed to quantify acid-induced changes in the two acid-rock systems. Further, a digital rock approach is developed to construct heterogeneous permeability maps of the intact specimens from CT images that feed as inputs into 3D Darcy-scale reactive transport models. Experimental results show that the acid type and pore space heterogeneity have primary control on dissolution patterns formed in limestone specimens and the resulting alterations in their hydromechanical properties. Under the flow conditions of these experiments, the complete dissociation of HCl as a strong acid leads to rapid limestone dissolution and the formation of compact dissolution patterns that only affect the hydromechanical properties at the core inlet. In contrast, partial dissociation of H2CO3 as a weak acid extends the dissolution reaction along the core and induces wormhole formation that markedly enhances the rock permeability. Altered cores render significant attenuation in both mechanical rock properties and ultrasonic velocities. Chemically-driven alterations in rock stiffness are reproduced using a Differential Effective Medium (DEM) homogenization approach. Numerical simulations using the 3D Darcy-scale reactive transport model satisfactorily reproduce the experimentally measured changes in effluent chemistry, porosity, permeability, and the observed dissolution features in CT images of reacted limestone samples. Simulation results indicate that the pore space heterogeneity controls calcite dissolution from the very beginning of acidic fluid injections while the acid type becomes progressively important as the reaction front further penetrates into the rock. The compact dissolution pattern formed in the HCl-limestone system can be numerically ‎captured using the classical Kozeny-Carman porosity-permeability relationship with a ‎power-law exponent of 3 applied to the grid blocks of the numerical domain. In the case of CO2 injection, however, formation of wormhole by continuous acid renewal exerts strong feedback between the fluid flow and the dissolution reaction. This dissolution pattern can only be reproduced using an exponent as large as 15 that increases to ≈ 27 for the bulk behavior of the core containing a wormhole. This demonstrates that acid-induced permeability evolution in carbonate rocks is highly scale-dependent. The percolation experiments performed using CO2-saturated water represent a severe scenario of CO2-brine-rock interactions in carbonate reservoirs that needs to be considered in predictions and monitoring of CO2 storage. This study highlights (1) the importance of small-scale heterogeneities in controlling flow properties and localization of flow and chemical reactions in limestones and (2) the need for developing rigorous upscaling approaches to account for them in field-scale simulations., This Ph.D. study has received funding from the European Joint Programme on Radioactive Waste Management, EJP-EURAD of the European Union’s Horizon 2020 Research and Innovation Programme 2014-2018 under agreement No. 847593, specifically from the WP MAGIC, and also from the Catalan Government through project 2017SGR1733., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Implicit hydromechanical representation of fractures using a continuum approach

  • Vaezi, Iman
  • Parisio, Francesco
  • Yoshioka, Keita
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Olivella, Sebastià
  • Vilarrasa, Víctor
Fractures control fluid flow, solute transport, and mechanical deformation in crystalline media. They can be modeled numerically either explicitly or implicitly via an equivalent continuum. The implicit framework implies lower computational cost and complexity. However, upscaling heterogeneous fracture properties for its implicit representation as an equivalent fracture layer remains an open question. In this study, we propose an approach, the Equivalent Fracture Layer (EFL), for the implicit representation of fractures surrounded by low-permeability rock matrix to accurately simulate hydromechanical coupled processes. The approach assimilates fractures as equivalent continua with a manageable scale (≫1 μm) that facilitates spatial discretization, even for large-scale models including multiple fractures. Simulation results demonstrate that a relatively thick equivalent continuum layer (in the order of cm) can represent a fracture (with aperture in the order of μm) and accurately reproduce the hydromechanical behavior (i.e., fluid flow and deformation/stress behavior). There is an upper bound restriction due to the Young's modulus because the equivalent fracture layer should have a lower Young's modulus than that of the surrounding matrix. To validate the approach, we model a hydraulic stimulation carried out at the Bedretto Underground Laboratory for Geosciences and Geoenergies in Switzerland by comparing numerical results against measured data. The method further improves the ability and simplicity of continuum methods to represent fractures in fractured media., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST ( www.georest.eu ), under grant agreement No. 801809. J.C. and V.V. acknowledge financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project no. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). The work of Geo-Energie Suisse AG was financially supported by the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. F. P. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, Spain under Grant Agreement No. 882733. K.Y. acknowledges funding from EURAD, the European Joint Programme on Radioactive Waste Management through the project DONUT (Grant No 847593 ). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198 , funded by MCIN/AEI/10.13039/501100011033). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variational Phase-Field Fracture Approach in Reactive Porous Media

  • Mollaali, Mostafa
  • Yoshioka, Keita
  • Lu, Renchao
  • Montoya, Vanessa
  • Vilarrasa, Víctor
  • Kolditz, Olaf
We present a comprehensive model to simulate fracture nucleation and propagation in porous media, incorporating chemical reactions. This model integrates three main processes: fluid flow in porous media, reactive transport, and the mechanical deformation of fractured porous media using a variational phase-field approach. To account for chemical reactions, we use the geochemical package PHREEQC, coupled with a finite-element transport solver (OpenGeoSys), to model reactions in both thermodynamic equilibrium and kinetically, considering changes in porosity. To represent chemical damage, we introduce a variable that ranges from intact material to fully damaged material. This variable accounts for changes in porosity as a result of chemical reactions, separate from the mechanical damage represented by the phase-field variable. We test our model through various examples to showcase its ability to capture fracture nucleation and propagation driven by chemical reactions. Our model is implemented within the open-source finite element framework OpenGeoSys., This work has been financed within the framework of EURAD, the European Joint Programme on Radioactive Waste Management (grant agreement No. 847593), specifically in the WP MAGIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A 3D Darcy-scale reactive transport modeling of experimental wormhole formation in limestone under geological CO2 storage conditions

  • Vafaie, Atefeh
  • Soler, Josep M.
  • Cama, Jordi
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
Geologic CO2 storage is projected to play a key role in mitigating the climate change crisis. Changes in pore structure and hydraulic properties are likely to occur in carbonate rocks when they interact with CO2 as an acid-producing agent. The ability to understand and evaluate such alterations benefits an improved understanding of CO2 flow and storage behavior in the subsurface. Here, we combine laboratory experiments and numerical simulations of CO2-saturated water and HCl solution injections into limestone specimens to develop an improved understanding of reactive flow in these rocks. We employ a digital rock approach based on X-ray micro-computed tomography (µCT) to construct heterogeneous rock permeability maps, fed as inputs into 3D Darcy-scale reactive transport models of the experiments. The simulations satisfactorily reproduce measured changes in effluent chemistry, porosity, and permeability as well as the observed dissolution features in reacted rock samples. We show that the pore space heterogeneity controls chemical reactions from the very beginning of acid injections while the acid type becomes progressively important as the reaction front further penetrates the rock. The complete dissociation of HCl as a strong acid leads to a compact dissolution pattern, numerically captured using the classical Kozeny-Carman porosity-permeability relationship. In contrast, the partial dissociation of aqueous CO2 as a weak acid and the related pH-buffering effect drive a strong feedback between fluid flow and dissolution, leading to wormhole formation. This dissolution pattern can be only reproduced by a large exponent (15 to 27.6) in the porosity-permeability relationship. The obtained results highlight the primary control of small-scale heterogeneities and acid type on coupled flow and chemical reactions in permeable limestones and the need for a rigorous upscaling approach for field-scale studies., This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme 2014–2018 under agreement No. 847593, specifically from the WP MAGIC. J.C. and J.M.S. acknowledge funding from the Catalan Government through project 2021 SGR 00308. I.R.K. and V.V. acknowledge support by the PCI2021-122077-2B project (www.easygeocarbon.com) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.K. also received funding from the Engineering and Physical Sciences Research Council through the UKRI Postdoc Guarantee Award THMC4CCS [Grant number EP/X026019/1]. V.V. acknowledges funding from the Spanish Ministry of Science, Innovation and Universities through the project HydroPoreII (PID2022-137652NB-C44). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S funded by MCIU/AEI/10.13039/501100011033). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MICIU/AEI/1013039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

EURAD state-of-the-art report: thermo-hydro-mechanical behaviour at high temperature of host clay formations

  • Villar Galicia, María Victoria
  • Bésuelle, Pierre
  • Collin, Frédéric
  • Cuss, Robert J.
  • de Lesquen, Christophe
  • Dizier, Arnaud
  • El Tabbal, Ginger
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Graham, Caroline
  • Grgic, Dragan
  • Harrington, J. F.
  • Imbert, Cristophe
  • Leupin, Olivier
  • Levasseur, Severine
  • Narkuniene, Asta
  • Simo, Eric
  • Tatomir, Alexandru Bogdan
Most safety cases for radioactive waste disposal concepts consider a temperature limit of 90°C in the clay host rock. Being able to tolerate higher temperature would have significant advantages. For this reason, part of the EURAD-HITEC project aimed at determining the influence of temperature above 90°C on clay host rock properties, trying to establish the possible extent of elevated temperature damage in the near and far field of clay host rock formations and the consequences of any such damage. Three clay formations considered to host radioactive waste repositories in Europe were the focus of the studies: the Boom Clay, the Callovo-Oxfordian claystone and the Opalinus Clay. A summary of the background knowledge about the thermo-hydro-mechanical behaviour of these clay host rocks is first presented. Then, the experimental and modelling activities carried out in the framework of the EURAD-HITEC project concerning these materials have been synthesised. The laboratory tests analysed the impact of temperature on the short- and long-term behaviour of the clay host rock and the self-sealing processes. Hydro-mechanical couplings between peak pore water pressure, temperature, permeability and confining stress were identified. The results confirmed that the claystone keeps its good mechanical and retention properties even when heated up to 100°C. Provided that the clay content of the samples is high enough, self-sealing was an efficient mechanism whatever the experimental conditions, although temperature may have a delaying effect. Poro-elastic models were used to model generic cases of a high-level waste repository, and consistent results were obtained by the different codes and teams, which shows the robustness of the modelling approach used to design the repositories. Two heating tests, performed in the HADES (Belgium) and MHM (France) underground research laboratories, were selected as benchmarks for the modelling activities. The evolutions of temperature and pore pressure were well modelled in the far field with a poro-elastic approach, but more advanced models are needed to take into account the processes occurring around the tunnels (e.g., modification of hydraulic properties within the EDZ, creep). The modelling of laboratory experiments showed the importance of a good understanding of the tests setup and of the boundary conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Levasseur, Severine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hydro-mechanical modelling of gas transport processes in clay materials using a multi-scale approach

  • Corman, Gilles
  • González Blanco, Laura|||0000-0003-3800-3007
  • Levasseur, Severine
  • Collin, Frédéric
Deep geological disposal is the preferred solution for radioactive waste management in many countries, including Belgium, where the Boom Clay is one of the potential candidate host formations. Over the long term, corrosion mechanisms are expected to release large amounts of gas that will rise in pressure and activate different gas transport processes in the system and the surrounding geological formation. Assessing which transfer mode prevails under which range of pressure conditions in the sound rock layers remains a major issue. This paper presents a multi-scale Hydro-Mechanical (HM) model capturing the influence of the microstructure features on the macroscopic gas flow, and especially the emergence of preferential gas-filled pathways. A detailed constitutive model for partially saturated clay materials is developed from experimental data to perform the modelling of a Representative Element Volume (REV), and integrated into a multi-scale scheme using homogenisation and localisation techniques for the transitions to the macroscopic scale. Using this tool, numerical modelling of a gas injection test in the Boom Clay is performed with the aim of improving the mechanistic understanding of gas transport processes in natural clay barriers.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling the hydration of bentonites under isothermal and non-isothermal conditions using a double-porosity approach

  • Pacelli, Rubem Vasconcelos|||0000-0001-5933-8565
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Rodríguez Romero, Carlos Eduardo
  • Vaunat, Jean|||0000-0003-3579-9652
The constitutive model for expansive materials described here follows the usual double-porosity approach that represents the clay soil as two overlapping pore media (microstructure and macrostructure) coupled through a micro-macro strain mechanism. However, the current formulation also includes a local water mass transfer controlling the saturation of the microstructure, the definition of water retention curves for each structural level, and the occurrence of thermal strains in both pore domains. These additional features enhance the model's ability to simulate the response of bentonites under varying moisture conditions. This double-porosity model satisfactorily simulated some infiltration tests taken from the literature, reproducing the main test observations and validating its use for predicting the behaviour of bentonites in various geotechnical engineering scenarios. The infiltration tests selected were carried out in columns made of FEBEX and MX-80 bentonites under isothermal and non-isothermal conditions to characterize the main hydro-mechanical and thermo-hydro-mechanical processes that occur within a bentonite barrier hydrated under confined conditions. The numerical simulations showed that structural changes in bentonite materials during the transient hydration phase are due to the irreversible response of the macrostructure (changes in macroporosity) but also depend on the mechanisms controlling the saturation of the microstructure., The work presented in this paper was developed in the framework of the Bentonite Mechanical Evolution Project (BEACON) and the European Joint Programme on Radioactive Waste Management (EURAD-HITEC) and received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement N◦ 745942 and from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement n◦ 847593, respectively. The support of Conacyt (Id. N◦ 710153) to the third author is gratefully acknowledged. The financial and technical support of ENRESA is also gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical investigation of THM behavior in anisotropic poroelastic media: from element test to geological disposal applications

  • Song, Fei|||0000-0002-3888-5786
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Collico, Stefano
  • Wang, Huaning
This study investigates the coupled Thermo-Hydro-Mechanical (THM) behaviour in anisotropic poroelastic media. The elastic stiffness is represented by using a cross-anisotropic constitutive model, while the water flow and the heat conduction are represented by using generalized Darcy's law and Fourier's law, respectively. Specifically, the THM formulations are modified to account for an anisotropic porous medium using anisotropic Biot's effective stress. As a verification step, numerical predictions of pore pressure evolutions subjected to mechanical and thermal loadings agree well with those obtained from analytical solutions. Numerical studies are conducted to identify the overpressure mechanism resulting from stress redistribution and thermal pressurization. As the discrepancy between Biot's coefficients and one increases, the inconsistency in the resulting pore pressures becomes more evident when using different definitions of solid pressure expression. Furthermore, a significant difference has been observed in pore pressure evolution computed by anisotropic and the equivalent isotropic Biot’s coefficient for Opalinus clay, but no obvious difference for Callovo-Oxfordian. These findings have implications for the understanding of the THM behaviour of argillaceous rocks, which benefit the potential geological applications in nuclear waste disposals., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hydro-mechanical response to gas transfer of deep argillaceous host rocks for radioactive waste disposal

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Marschall, Paul
  • Levasseur, Severine
During recent decades, argillaceous sedimentary formations have been studied as potential host formations for the geological disposal of long-living and heat-emitting radioactive waste—Boom Clay in Belgium and Opalinus Clay and Brown Dogger in Switzerland. A significant issue in the long-term performance of these potential host rocks concerns the generation and transport of gases. The pressure resulting from the generation of gas in an almost impermeable geological medium in the near field of a repository will increase. Under high gas pressures, the mechanical and hydraulic properties of the host rock are expected to change significantly. Preferential gas pathways may develop which exploit material heterogeneity, anisotropy (bedding planes), rock discontinuities, or interfaces between the different components of the repository, and may eventu- ally lead to the release of the produced gases. Gas flow through these clayey rocks is investigated on the basis of laboratory work. Priority has been given to studying the volume change response of these initially water-saturated materials through relatively fast and controlled volume-rate gas injections. The effect of the gas injection rate, the confining pressure and the bedding orientation on the gas transport properties have been studied with particular attention paid to the coupling with strain behaviour. The results have shown features common to the three formations concerning the gas transfer process through preferential pathways, despite their initially differential properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work is funded by the European Joint Programme on Radioactive Waste Management (EURAD WP-GAS) within the Horizon 2020-Euratom programme under grant agreement No 847593 (2019–2024). Past research contracts with NAGRA (National Cooperative for the Disposal of Radioactive Waste, Switzerland) and ONDRAF/NIRAS (Belgian Agency for Radioactive Waste and Enriched Fissile Materials) also provided funding., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effectiveness of self-sealing after gas transport in Boom Clay

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Levasseur, Severine
The study of gas transport in low permeable materials is becoming a significant focus in energy-related geotechnics, particularly for managing deep geological disposal of long-lived and heat-emitting radioactive waste. Argillaceous rocks, studied to host the disposal, may present induced fractures caused by the excavation activities that increase the permeability to liquid and gas. The generation of gases can also lead to an excessive pressure build-up in these saturated media resulting in the development or reactivation of fractures/fissures creating preferential pathways for the gas flow [1]. Nevertheless, these rocks present the advantage of self-seal (via swelling of clay minerals due to re-saturation, consolidation or creep), reducing fissure permeability and potentially restoring the barrier function. This study focuses on Boom Clay, a Cenozoic clay candidate for hosting the repository in the Belgian programme, aiming at characterising the effectiveness of its self-sealing process after gas injection/dissipation tests due to the swelling of clay minerals during re-saturation. This poorly indurated rock presents sedimentary bedding planes that can act as preferential pathways during the gas invasion. In a previous experimental campaign, samples at two bedding orientations (parallel and orthogonal to the flow) were tested under oedometer conditions [3, 4]. The results indicate that gas transport induced slight expansion of the samples in both orientations, increasing their intrinsic permeability, which suggested the opening of preferential paths. Furthermore, the analyses of the pore network using mercury intrusion porosimetry (MIP) and micro-focus X-ray computed tomography (µ-CT) confirmed the development of gas pathways following the bedding direction or interconnecting bedding planes [4, 5]., This project has received funding from the European Union’s Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. In addition, the acknowledgements are extended to the Belgian Agency for Radioactive Waste and Enriched Fissile Ma- terials (ONDRAF/NIRAS) under contract No. CCHO 2021-0377/00/00 (2021-2024)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fully coupled THM constitutive model for clay rocks: formulation and application to laboratory tests

  • Song, Fei|||0000-0002-3888-5786
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Collico, Stefano
  • Grgic, Dragan
  • Wang, Huaning
This study presents a fully coupled thermo-hydro-mechanical (THM) constitutive model for clay rocks. The model is formulated within the elastic-viscoplasticity framework, which considers nonlinearity and softening after peak strength, anisotropy of stiffness and strength, as well as permeability variation due to damage. In addition, the mechanical properties are coupled with thermal phenomena and accumulated plastic strains. The adopted nonlocal and viscoplastic approaches enhance numerical efficiency and provide the possibility to simulate localization phenomena. The model is validated against experimental data from laboratory tests conducted on Callovo-Oxfordian (COx) claystone samples that are initially unsaturated and under suction. The tests include a thermal phase where the COx specimens are subjected to different temperature increases. A good agreement with experimental data is obtained. In addition, parametric analyses are carried out to investigate the influence of the hydraulic boundary conditions (B.C.) and post-failure behavior models on the THM behavior evolution. It is shown that different drainage conditions affect the thermally induced pore pressures that, in turn, influence the onset of softening. The constitutive model presented constitutes a promising approach for simulating the most important features of the THM behavior of clay rocks. It is a tool with a high potential for application to several relevant case studies, such as thermal fracturing analysis of nuclear waste disposal systems., This work was funded by the European Union's Horizon 2020 research and innovation programme under a grant agreement (Grant No. 847593), partially supported by the Fundamental Research Funds for the Central Universities (Grant No. 22120240029). The authors thank the organizing Committee of Unsat-Waste2023 for their invitation to contribute to the special issue “Unsat-Waste2023"., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Levasseur, Séverine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A multi-scale insight into gas transport in a deep Cenozoic clay

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
The migration of gases is crucial to ensure the long-term feasibility of argillaceous formations for the deep disposal of radioactive waste. This paper presents an experimental investigation with a multi-scale perspective on the response to gas transport of initially saturated Boom Clay (Belgium). Gas injection tests have been performed under oedometer conditions at different controlled-volume rates, constant total vertical stress and different sample orientations (flow orthogonal or parallel to bedding planes). The results confirm soil expansion and consequent degradation during injection that has a significant impact on the aperture of localised gas pathways (fissures) and increases intrinsic permeability during the gas pressure dissipation stage. The analyses with complementary techniques (mercury intrusion porosimetry, field-emission scanning electron microscopy and X-ray micro-tomography) confirm the opening of fissures with different apertures and separations at the microstructural scale. Large-aperture fissures develop along the weaker bedding planes. These techniques allow the volume of fissures to be quantified, which does not significantly depend on gas flow direction, as also measured in the isotropic response of the gas effective permeability. A scalar damage variable derived from the fissured fraction has been used to assess the gas-entry pressure reduction and the intrinsic permeability increase after the gas tests in both directions., The authors are grateful to ONDRAF/NIRAS (Belgian National Agency for Radioactive Waste and Enriched Fissile Material) for funding this research programme under contract no. XSI/AV/2012-1952 (2012–2016) and no. CCHO 2018-0089/00/00 (2018–2020). This project has received funding from the European Union's Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under the grant agreement No. 847593. The Spanish ‘Severo Ochoa Programme for Centres of Excellence in R&D’ (CEX2018-000797-S) is also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of gap-sealing on hydro-mechanical behaviour of granular bentonite

  • Zeng, Hao
  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Granular bentonite (GB), offering better pourability and workability than traditional powder bentonites, has been proposed as a candidate material for engineered barriers in deep geological repositories of radioactive waste. During service, involving complex hydro-mechanical (HM) stress paths, GB barriers are expected to seal technological gaps within the system. However, few studies have examined the HM behaviour of GB related to gap sealing. To address this, a technological gap was initially fabricated within the compacted GB samples used for HM testing. The gap enhanced the compressibility of the sample, promoting a hardening effect under high stress and thereby reducing the volumetric collapse during subsequent wetting. Under low stress, the gap accelerated the hydration swelling, while the final swelling strain depended on the sample’s initial global dry density. Similarly, gap sealing had little effect on the development of swelling pressure when the sample was wetted under constant volume. Furthermore, the water permeability after saturation at a comparable global void ratio was higher in the initially gapped sample than in the intact one. These findings are anticipated to support a long-term safety assessment of GB barriers., This project has received funding from the European Union’s Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP GAS ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. The authors acknowledge the support of NAGRA through the project ‘Scientific work related to barrier integrity’ Ref 18722 (2019-2024). All authors also thank project PID2022141429OB-I00, funded by the Spanish Ministry of Science/Research Agency 501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of heating on clay formations: results of a THM modelling benchmark exercise on two heater tests in indurated and poorly indurated clays

  • de Lesquen, Christophe
  • Dizier, Arnaud
  • Plúa, Carlos
  • Vu, Minh-Ngoc
  • Armand, Gilles
  • Simo, Eric
  • Leon Vargas, Rocio Paola
  • Raude, Simon
  • El Tabbal, Ginger
  • Seetharam, Suresh
  • Narkuniene, Asta
  • Collin, Frédéric
  • Song, Hangbiao
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Song, Fei|||0000-0002-3888-5786
  • Levasseur, Severine
In the framework of the European Joint Programme EURAD, the HITEC work package aimed at investigating the influence of thermal loading on the behaviour of clay-based materials. Three clay formations considered to host potential radioactive waste repositories were studied, the Callovo-Oxfordian (COx) claystone, the Boom Clay and the Opalinus clay as well as different types of bentonite used as engineered barrier. Through HITEC, a series of benchmarking exercises focusing on the clayey host formations were proposed to seven European modelling teams. The benchmark consisted in three consecutive steps, starting with 2D generic models to study the near-field and far-field effects of heating on the behaviour of clay rocks and then considering triaxial compression tests under elevated temperature on COx samples. The last step of the benchmark consisted in modelling two in-situ heating experiments: ALC1605 in the COx claystone and the large scale PRACLAY Heater test in the Boom Clay. In both cases, the teams successfully managed to reproduce the anisotropic response of the clay host rocks to excavation and heating. The evolutions of temperature and pore pressure were well modelled in the far-field with an anisotropic poro-elastic approach but this article highlights particularly how advanced models allowed to capture the processes occurring around the tunnels. In order to match best the measurements, these models required a dependence of the stiffness and permeability with the deformation. One of these advanced models was tested on both in-situ experiments and gave remarkably good results, even though the two clayey host formations have different hydro-mechanical properties. It illustrates a common understanding of THM processes in poorly indurated clay and in claystone and provides some keys for transferring knowledge from one clay formation to another., The authors would like to thank the EU for funding the research via the EURAD programme and the organising committee of the 9th Clay Conference in Hannover for the opportunity to publish their work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

EURAD state-of-the-art report: thermo-hydro-mechanical behaviour of clay buffers at high temperatures

  • Victoria Villar, María
  • Cernochova, Katerina
  • Cuevas Rodríguez, Jaime
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Gimeno, Natalia
  • Graham, Caroline
  • Harrington, Jon
  • Kašpar, Vlastislav
  • Kaufhold, Stephan
  • Leupin, Olivier
  • Masín, David
  • Najser, Jan
  • Olin, Markus
  • Reijonen, Heini
  • Šachlová, Šárka
  • Sayenko, Sergey
  • Svensson, Daniel
  • Svoboda, Jiri
  • Vettese, Gianni
  • Yliharju, Janne
  • Zlobenko, Borys
Most safety cases for radioactive waste disposal consider a temperature limit of 100°C for the clay buffers. Given that being able to tolerate higher temperatures would have significant advantages, the work package HITEC of the EURAD project aimed at determining the influence of temperature above 100°C on buffer properties, trying to establish if the safety functions are unacceptably impaired. A synthesis of the state of knowledge on the thermo-hydro-mechanical and chemical behaviours of different buffer materials at different temperatures is presented, along with the progress made in this area during HITEC. The changes in the properties of the preheated material and the hydromechanical properties of bentonite at high temperatures were assessed. To cover the first instance, bentonite was heated at 150°C in dry and wet conditions for different periods of time up to 2 years. The clay mineralogy was significantly preserved. The slight changes observed in the other properties were opposite depending on the heating conditions: in the case of evaporation, the cation exchange capacity, specific surface area, sorption coefficients, and sometimes swelling pressure decreased. These changes likely resulted from the strong drying induced by the elevated temperatures. Bentonite was also subjected to hydration under a thermal gradient in field and laboratory tests. No post-mortem structural modifications of the smectite were observed; however, dissolution and precipitation of species occurred, conditioned by the type of bentonite and hydration water. These processes were accompanied by the modification of the exchangeable cation complex. Determination of the hydromechanical properties of expansive clay at elevated temperatures is challenging owing to experimental and interpretation issues. In most cases, a reduced swelling pressure was obtained when the temperature increased, particularly at higher dry densities. These results may have been affected by the experimental protocols, use of bentonite or purified smectite, and exchangeable cations. Even at the highest temperatures, bentonite can fill voids and develop large swelling pressures at high densities. Thermo-hydro-mechanical models were developed or upgraded during the project to include thermal phenomena and dependencies and were applied to the simulation of new laboratory thermo-hydraulic tests in cells., The author(s) declare that financial support was received for the research and/or publication of this article. European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No 847593., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implicit hydromechanical representation of fractures using a continuum approach

  • Vaezi Anzeha, Iman
  • Parisio, Francesco
  • Keita, Yoshioka
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Olivella Pastallé, Sebastià|||0000-0003-3976-4027
  • Vilarrasa Riaño, Víctor|||0000-0003-1169-4469
Fractures control fluid flow, solute transport, and mechanical deformation in crystalline media. They can be modeled numerically either explicitly or implicitly via an equivalent continuum. The implicit framework implies lower computational cost and complexity. However, upscaling heterogeneous fracture properties for its implicit representation as an equivalent fracture layer remains an open question. In this study, we propose an approach, the Equivalent Fracture Layer (EFL), for the implicit representation of fractures surrounded by low-permeability rock matrix to accurately simulate hydromechanical coupled processes. The approach assimilates fractures as equivalent continua with a manageable scale (»1 µm) that facilitates spatial discretization, even for large-scale models including multiple fractures. Simulation results demonstrate that a relatively thick equivalent continuum layer (in the order of cm) can represent a fracture (with aperture in the order of µm) and accurately reproduce the hydromechanical behavior (i.e., fluid flow and deformation/stress behavior). There is an upper bound restriction due to the Young's modulus because the equivalent fracture layer should have a lower Young's modulus than that of the surrounding matrix. To validate the approach, we model a hydraulic stimulation carried out at the Bedretto Underground Laboratory for Geosciences and Geoenergies in Switzerland by comparing numerical results against measured data. The method further improves the ability and simplicity of continuum methods to represent fractures in fractured media., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. J.C. and V.V. acknowledge financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project no. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). The work of Geo-Energie Suisse AG was financially supported by the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. F. P. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, Spain under Grant Agreement No. 882733. K.Y. acknowledges funding from EURAD, the European Joint Programme on Radioactive Waste Management through the project DONUT (Grant No 847593). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Microstructure and hydro-mechanical behaviour of compacted granular bentonite

  • Zeng, Hao
  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Fraccica, Alessandro
In recent years, granular bentonite GB has become a reference material since it facilitates the backfilling operation due to high-density compacted granules with extended grain size distribution (maximum sizes around 10 mm). This investigation explores the initial microstructure of MX80-type GB and the hydro-mechanical HM response observed at the phenomenological scale. Samples were statically compacted at a fixed dry density (1.55 Mg/m3 ), encompassing dry and wet sides of the optimum. The microstructural study was performed using a combination of X-ray micro-computed tomography and mercury intrusion porosimetry. The results indicate that the pore size density function of compacted GB can be simplified as a double-porosity network with micropores (intra-granular/aggregate pores) and macropores (inter-granular/aggregate pores). Compacting at the dry side increases macropores, making the sample more compressible on loading under as-compacted states despite the higher matric suction. The time evolution of the swelling pressure displays a double-peak pattern attributed to the particular microstructure of the samples. Moreover, the initial microstructure does not significantly influence the water retention properties without a marked hysteresis in the high-suction range under confined wetting/drying cycles. This work’s outcomes highlight the microstructure’s significance in the HM behaviour of compacted GB and provide further insight into the geotechnical properties of this material., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The importance of the microstructure on hydro-mechanical behaviour of compacted granular bentonite

  • Zeng, Hao
  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Fraccica, Alessandro
Granular bentonite (GB) with extended grain size distribution, a candidate material to construct engineered barriers, has low water permeability, high swelling potential and self-sealing capacity and is desirable in portability and workability. However, few systematic data combining microstructural descriptions and hydro-mechanical (HM) behavioural features are available. The present work investigates the HM performance of Wyoming (MX80)-type GB samples compacted at different initial water contents and at a fixed dry density of 1550 kg/m3. The samples' microstructure and its evolution along stress paths were studied using X-ray micro-computed tomography and mercury intrusion porosimetry. The results highlighted that the compacted GB presented local density heterogeneity and a multi-porosity network. Compaction at low initial water content increased the proportion of macropores and contributed to the enhancement of the compressibility and collapse on wetting under high stresses. During isochoric saturation, two stages of swelling development were identified. First, the flooding of macropores and matric suction reduction was related to the initial increase in swelling pressure. The secondary swelling was due to the water absorption of clay sheets in micropores and the expansion of micropores within granules and aggregates, during which the density of pore water increased. A decrease in the compaction water content can result in a higher pore water density after isochoric saturation and a lower water permeability. Finally, the water retention behaviour of the compacted sample within drying/wetting cycles was less sensitive to the initial pore size distribution. The current outcomes underline the critical role of the microstructure on the HM behaviour of compacted GB., This project has received funding from the European Union's Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP GAS ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. The authors acknowledge the support of NAGRA (National Cooperative for the Disposal of Radioactive Waste) through the project ‘Scientific work related to barrier integrity’ Ref 18722 (2019-2024). The first author has received funding from the China Scholarship Council (CSC, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Comparative study of gas testing protocols in clayey rocks for nuclear waste repositories

  • González Blanco, Laura|||0000-0003-3800-3007
  • Llabjani, Qazim
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Ferrari, Alessio
  • Laloui, Lyesse
  • Marschall, Paul
Understanding gas transport processes in clay barriers is crucial for assessing the long-term safety of geological repositories for radioactive waste. Fundamental and well-designed experimental research at the laboratory scale is an indispensable prerequisite for conceptualising gas transport mechanisms and their simulation at repository scales. In practice, however, it turns out that comparing gas invasion experiments on argillaceous rock samples is difficult since different laboratories use different test protocols. This paper presents a collaborative and comparative study conducted by two teams from the Geotechnical Laboratory at the Universitat Politècnica de Catalunya (UPC, Spain) and the Laboratory of Soil Mechanics at the Swiss Federal Institute of Technology of Lausanne (LMS/EPFL, Switzerland), carried out as part of the European Joint Programme EURAD. Both teams employed equivalent gas testing protocols to characterise two argillaceous host rocks: Boom Clay (Belgium) and Opalinus Clay (Switzerland). The integrated workflow enabled the determination of common features regarding the hydro-mechanical response of the tested samples. This research underscores the importance of verifiable testing methods to enhance the understanding of gas transport in geological repositories. The results highlight the benefits of coordinated efforts and shared methodologies in advancing geotechnical research and fostering collaboration among national agencies., It is acknowledged the funding received from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593 and from Nagra (Nationale Genossenschaft für die Lagerung radioaktiver Abfälle) under contracts No. 18713 and No. 18722. The first and third authors also acknowledge the financial support of the INTERMO2 project (PID2022141429OB-I00) funded by the Spanish Ministry of Science/Research Agency CIN/AEI/10.13039/501100011033/FEDER EU (2023-2027) and from ONDRAF/NIRAS under contract No. CCHO 2024-0374/00/00 (2024-2026).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Self-sealing of boom clay after gas transport

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Levasseur, Severine
In the geological disposal of high-level radioactive waste in argillaceous rocks, studying the barrier integrity after gas transport and the pathway closure thanks to self-sealing capacity is a crucial aspect for the safety assessment. This paper presents experimental research in Boom Clay (a potential host rock in Belgium) to evaluate the effectiveness of self-sealing and possible fissure reactivation during a second gas invasion event. Initial water permeability under oedometer conditions was first measured on samples at two bedding orientations, being higher the sample with bedding planes parallel to flow, highlighting marked anisotropy. Then, gas injection tests at a constant volume rate were performed. Results indicated that Boom Clay underwent expansion and degradation during gas injection due to the development of fissures that were quantified using microstructural techniques. The computed effective gas permeability was not significantly dependent on bedding orientation and was slightly larger than the initial intrinsic water permeability. The re-saturation of the samples led to a recovery of the initial water permeability for both orientations, replicating the original anisotropy. The microstructural analyses confirmed the gas pathways’ closure, indicating good self-sealing and the regaining of the hydraulic barrier function. However, a small volume of large unconnected pores was detected on undrained unloading before the microstructural study. An additional gas injection after the self-sealing resulted in a higher effective gas permeability and a larger increase in pore volume, suggesting the reopening of fissures generated during the first injection. Finally, the experimental data were compiled within a multi-scale phenomenological model to relate the microstructural information to macroscopic flow transport properties capturing the intrinsic permeability increase on gas invasion and its recovery during self-sealing., This project has received funding from the Euro- pean Union’s Horizon 2020 research and innovation programme ‘Euro- pean Joint Programme on Radioactive Waste Management (EURAD)’ (2019–2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under Grant agreement No. 847593. In addition, the acknowledgements are extended to the Belgian Agency for Radioactive Waste and Enriched Fissile Materials (ONDRAF/NIRAS) for fund- ing this research program under contract No. CCHO 2021-0377/00/00 (2021–2024)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effectiveness of self-sealing after gas transport in Boom Clay

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Levasseur, Severine
The study of gas transport in low permeable materials is becoming a significant focus in energy-related geotechnics, particularly for managing deep geological disposal of long-lived and heat-emitting radioactive waste. Argillaceous rocks, studied to host the disposal, may present induced fractures caused by the excavation activities that increase the permeability to liquid and gas. The generation of gases can also lead to an excessive pressure build-up in these saturated media resulting in the development or reactivation of fractures/fissures creating preferential pathways for the gas flow [1]. Nevertheless, these rocks present the advantage of self-seal (via swelling of clay minerals due to re-saturation, consolidation or creep), reducing fissure permeability and potentially restoring the barrier function. This study focuses on Boom Clay, a Cenozoic clay candidate for hosting the repository in the Belgian programme, aiming at characterising the effectiveness of its self-sealing process after gas injection/dissipation tests due to the swelling of clay minerals during re-saturation. This poorly indurated rock presents sedimentary bedding planes that can act as preferential pathways during the gas invasion. In a previous experimental campaign, samples at two bedding orientations (parallel and orthogonal to the flow) were tested under oedometer conditions [3, 4]. The results indicate that gas transport induced slight expansion of the samples in both orientations, increasing their intrinsic permeability, which suggested the opening of preferential paths. Furthermore, the analyses of the pore network using mercury intrusion porosimetry (MIP) and micro-focus X-ray computed tomography (µ-CT) confirmed the development of gas pathways following the bedding direction or interconnecting bedding planes [4, 5]., This project has received funding from the European Union’s Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. In addition, the acknowledgements are extended to the Belgian Agency for Radioactive Waste and Enriched Fissile Ma- terials (ONDRAF/NIRAS) under contract No. CCHO 2021-0377/00/00 (2021-2024)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of heating on clay formations: results of a THM modelling benchmark exercise on two heater tests in indurated and poorly indurated clays

  • de Lesquen, Christophe
  • Dizier, Arnaud
  • Plúa, Carlos
  • Vu, Minh-Ngoc
  • Armand, Gilles
  • Simo, Eric
  • Leon Vargas, Rocio Paola
  • Raude, Simon
  • El Tabbal, Ginger
  • Seetharam, Suresh
  • Narkuniene, Asta
  • Collin, Frédéric
  • Song, Hangbiao
  • Gens Solé, Antonio
  • Song, Fei
  • Levasseur, Severine
In the framework of the European Joint Programme EURAD, the HITEC work package aimed at investigating the influence of thermal loading on the behaviour of clay-based materials. Three clay formations considered to host potential radioactive waste repositories were studied, the Callovo-Oxfordian (COx) claystone, the Boom Clay and the Opalinus clay as well as different types of bentonite used as engineered barrier. Through HITEC, a series of benchmarking exercises focusing on the clayey host formations were proposed to seven European modelling teams. The benchmark consisted in three consecutive steps, starting with 2D generic models to study the near-field and far-field effects of heating on the behaviour of clay rocks and then considering triaxial compression tests under elevated temperature on COx samples. The last step of the benchmark consisted in modelling two in-situ heating experiments: ALC1605 in the COx claystone and the large scale PRACLAY Heater test in the Boom Clay. In both cases, the teams successfully managed to reproduce the anisotropic response of the clay host rocks to excavation and heating. The evolutions of temperature and pore pressure were well modelled in the far-field with an anisotropic poro-elastic approach but this article highlights particularly how advanced models allowed to capture the processes occurring around the tunnels. In order to match best the measurements, these models required a dependence of the stiffness and permeability with the deformation. One of these advanced models was tested on both in-situ experiments and gave remarkably good results, even though the two clayey host formations have different hydro-mechanical properties. It illustrates a common understanding of THM processes in poorly indurated clay and in claystone and provides some keys for transferring knowledge from one clay formation to another., The authors would like to thank the EU for funding the research via the EURAD programme and the organising committee of the 9th Clay Conference in Hannover for the opportunity to publish their work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Levasseur, Séverine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

EURAD state-of-the-art report: thermo-hydro-mechanical behaviour at high temperature of host clay formations

  • Villar Galicia, María Victoria
  • Bésuelle, Pierre
  • Collin, Frédéric
  • Cuss, Robert J.
  • de Lesquen, Christophe
  • Dizier, Arnaud
  • El Tabbal, Ginger
  • Gens Solé, Antonio
  • Graham, Caroline
  • Grgic, Dragan
  • Harrington, J. F.
  • Imbert, Cristophe
  • Leupin, Olivier
  • Levasseur, Severine
  • Narkuniene, Asta
  • Simo, Eric
  • Tatomir, Alexandru Bogdan
Most safety cases for radioactive waste disposal concepts consider a temperature limit of 90°C in the clay host rock. Being able to tolerate higher temperature would have significant advantages. For this reason, part of the EURAD-HITEC project aimed at determining the influence of temperature above 90°C on clay host rock properties, trying to establish the possible extent of elevated temperature damage in the near and far field of clay host rock formations and the consequences of any such damage. Three clay formations considered to host radioactive waste repositories in Europe were the focus of the studies: the Boom Clay, the Callovo-Oxfordian claystone and the Opalinus Clay. A summary of the background knowledge about the thermo-hydro-mechanical behaviour of these clay host rocks is first presented. Then, the experimental and modelling activities carried out in the framework of the EURAD-HITEC project concerning these materials have been synthesised. The laboratory tests analysed the impact of temperature on the short- and long-term behaviour of the clay host rock and the self-sealing processes. Hydro-mechanical couplings between peak pore water pressure, temperature, permeability and confining stress were identified. The results confirmed that the claystone keeps its good mechanical and retention properties even when heated up to 100°C. Provided that the clay content of the samples is high enough, self-sealing was an efficient mechanism whatever the experimental conditions, although temperature may have a delaying effect. Poro-elastic models were used to model generic cases of a high-level waste repository, and consistent results were obtained by the different codes and teams, which shows the robustness of the modelling approach used to design the repositories. Two heating tests, performed in the HADES (Belgium) and MHM (France) underground research laboratories, were selected as benchmarks for the modelling activities. The evolutions of temperature and pore pressure were well modelled in the far field with a poro-elastic approach, but more advanced models are needed to take into account the processes occurring around the tunnels (e.g., modification of hydraulic properties within the EDZ, creep). The modelling of laboratory experiments showed the importance of a good understanding of the tests setup and of the boundary conditions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microstructure and hydro-mechanical behaviour of compacted granular bentonite

  • Zeng, Hao
  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Fraccica, Alessandro
In recent years, granular bentonite GB has become a reference material since it facilitates the backfilling operation due to high-density compacted granules with extended grain size distribution (maximum sizes around 10 mm). This investigation explores the initial microstructure of MX80-type GB and the hydro-mechanical HM response observed at the phenomenological scale. Samples were statically compacted at a fixed dry density (1.55 Mg/m3 ), encompassing dry and wet sides of the optimum. The microstructural study was performed using a combination of X-ray micro-computed tomography and mercury intrusion porosimetry. The results indicate that the pore size density function of compacted GB can be simplified as a double-porosity network with micropores (intra-granular/aggregate pores) and macropores (inter-granular/aggregate pores). Compacting at the dry side increases macropores, making the sample more compressible on loading under as-compacted states despite the higher matric suction. The time evolution of the swelling pressure displays a double-peak pattern attributed to the particular microstructure of the samples. Moreover, the initial microstructure does not significantly influence the water retention properties without a marked hysteresis in the high-suction range under confined wetting/drying cycles. This work’s outcomes highlight the microstructure’s significance in the HM behaviour of compacted GB and provide further insight into the geotechnical properties of this material., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implicit hydromechanical representation of fractures using a continuum approach

  • Vaezi Anzeha, Iman
  • Parisio, Francesco
  • Keita, Yoshioka
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Olivella Pastallé, Sebastià
  • Vilarrasa Riaño, Víctor
Fractures control fluid flow, solute transport, and mechanical deformation in crystalline media. They can be modeled numerically either explicitly or implicitly via an equivalent continuum. The implicit framework implies lower computational cost and complexity. However, upscaling heterogeneous fracture properties for its implicit representation as an equivalent fracture layer remains an open question. In this study, we propose an approach, the Equivalent Fracture Layer (EFL), for the implicit representation of fractures surrounded by low-permeability rock matrix to accurately simulate hydromechanical coupled processes. The approach assimilates fractures as equivalent continua with a manageable scale (»1 µm) that facilitates spatial discretization, even for large-scale models including multiple fractures. Simulation results demonstrate that a relatively thick equivalent continuum layer (in the order of cm) can represent a fracture (with aperture in the order of µm) and accurately reproduce the hydromechanical behavior (i.e., fluid flow and deformation/stress behavior). There is an upper bound restriction due to the Young's modulus because the equivalent fracture layer should have a lower Young's modulus than that of the surrounding matrix. To validate the approach, we model a hydraulic stimulation carried out at the Bedretto Underground Laboratory for Geosciences and Geoenergies in Switzerland by comparing numerical results against measured data. The method further improves the ability and simplicity of continuum methods to represent fractures in fractured media., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. J.C. and V.V. acknowledge financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project no. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). The work of Geo-Energie Suisse AG was financially supported by the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. F. P. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, Spain under Grant Agreement No. 882733. K.Y. acknowledges funding from EURAD, the European Joint Programme on Radioactive Waste Management through the project DONUT (Grant No 847593). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Levasseur, Severine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A multi-scale insight into gas transport in a deep Cenozoic clay

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
The migration of gases is crucial to ensure the long-term feasibility of argillaceous formations for the deep disposal of radioactive waste. This paper presents an experimental investigation with a multi-scale perspective on the response to gas transport of initially saturated Boom Clay (Belgium). Gas injection tests have been performed under oedometer conditions at different controlled-volume rates, constant total vertical stress and different sample orientations (flow orthogonal or parallel to bedding planes). The results confirm soil expansion and consequent degradation during injection that has a significant impact on the aperture of localised gas pathways (fissures) and increases intrinsic permeability during the gas pressure dissipation stage. The analyses with complementary techniques (mercury intrusion porosimetry, field-emission scanning electron microscopy and X-ray micro-tomography) confirm the opening of fissures with different apertures and separations at the microstructural scale. Large-aperture fissures develop along the weaker bedding planes. These techniques allow the volume of fissures to be quantified, which does not significantly depend on gas flow direction, as also measured in the isotropic response of the gas effective permeability. A scalar damage variable derived from the fissured fraction has been used to assess the gas-entry pressure reduction and the intrinsic permeability increase after the gas tests in both directions., The authors are grateful to ONDRAF/NIRAS (Belgian National Agency for Radioactive Waste and Enriched Fissile Material) for funding this research programme under contract no. XSI/AV/2012-1952 (2012–2016) and no. CCHO 2018-0089/00/00 (2018–2020). This project has received funding from the European Union's Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under the grant agreement No. 847593. The Spanish ‘Severo Ochoa Programme for Centres of Excellence in R&D’ (CEX2018-000797-S) is also acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of gap-sealing on hydro-mechanical behaviour of granular bentonite

  • Zeng, Hao
  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
Granular bentonite (GB), offering better pourability and workability than traditional powder bentonites, has been proposed as a candidate material for engineered barriers in deep geological repositories of radioactive waste. During service, involving complex hydro-mechanical (HM) stress paths, GB barriers are expected to seal technological gaps within the system. However, few studies have examined the HM behaviour of GB related to gap sealing. To address this, a technological gap was initially fabricated within the compacted GB samples used for HM testing. The gap enhanced the compressibility of the sample, promoting a hardening effect under high stress and thereby reducing the volumetric collapse during subsequent wetting. Under low stress, the gap accelerated the hydration swelling, while the final swelling strain depended on the sample’s initial global dry density. Similarly, gap sealing had little effect on the development of swelling pressure when the sample was wetted under constant volume. Furthermore, the water permeability after saturation at a comparable global void ratio was higher in the initially gapped sample than in the intact one. These findings are anticipated to support a long-term safety assessment of GB barriers., This project has received funding from the European Union’s Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP GAS ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. The authors acknowledge the support of NAGRA through the project ‘Scientific work related to barrier integrity’ Ref 18722 (2019-2024). All authors also thank project PID2022141429OB-I00, funded by the Spanish Ministry of Science/Research Agency 501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical investigation of THM behavior in anisotropic poroelastic media: from element test to geological disposal applications

  • Song, Fei
  • Gens Solé, Antonio
  • Collico, Stefano
  • Wang, Huaning
This study investigates the coupled Thermo-Hydro-Mechanical (THM) behaviour in anisotropic poroelastic media. The elastic stiffness is represented by using a cross-anisotropic constitutive model, while the water flow and the heat conduction are represented by using generalized Darcy's law and Fourier's law, respectively. Specifically, the THM formulations are modified to account for an anisotropic porous medium using anisotropic Biot's effective stress. As a verification step, numerical predictions of pore pressure evolutions subjected to mechanical and thermal loadings agree well with those obtained from analytical solutions. Numerical studies are conducted to identify the overpressure mechanism resulting from stress redistribution and thermal pressurization. As the discrepancy between Biot's coefficients and one increases, the inconsistency in the resulting pore pressures becomes more evident when using different definitions of solid pressure expression. Furthermore, a significant difference has been observed in pore pressure evolution computed by anisotropic and the equivalent isotropic Biot’s coefficient for Opalinus clay, but no obvious difference for Callovo-Oxfordian. These findings have implications for the understanding of the THM behaviour of argillaceous rocks, which benefit the potential geological applications in nuclear waste disposals., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

EURAD state-of-the-art report: thermo-hydro-mechanical behaviour of clay buffers at high temperatures

  • Victoria Villar, María
  • Cernochova, Katerina
  • Cuevas Rodríguez, Jaime
  • Gens Solé, Antonio
  • Gimeno, Natalia
  • Graham, Caroline
  • Harrington, Jon
  • Kašpar, Vlastislav
  • Kaufhold, Stephan
  • Leupin, Olivier
  • Masín, David
  • Najser, Jan
  • Olin, Markus
  • Reijonen, Heini
  • Šachlová, Šárka
  • Sayenko, Sergey
  • Svensson, Daniel
  • Svoboda, Jiri
  • Vettese, Gianni
  • Yliharju, Janne
  • Zlobenko, Borys
Most safety cases for radioactive waste disposal consider a temperature limit of 100°C for the clay buffers. Given that being able to tolerate higher temperatures would have significant advantages, the work package HITEC of the EURAD project aimed at determining the influence of temperature above 100°C on buffer properties, trying to establish if the safety functions are unacceptably impaired. A synthesis of the state of knowledge on the thermo-hydro-mechanical and chemical behaviours of different buffer materials at different temperatures is presented, along with the progress made in this area during HITEC. The changes in the properties of the preheated material and the hydromechanical properties of bentonite at high temperatures were assessed. To cover the first instance, bentonite was heated at 150°C in dry and wet conditions for different periods of time up to 2 years. The clay mineralogy was significantly preserved. The slight changes observed in the other properties were opposite depending on the heating conditions: in the case of evaporation, the cation exchange capacity, specific surface area, sorption coefficients, and sometimes swelling pressure decreased. These changes likely resulted from the strong drying induced by the elevated temperatures. Bentonite was also subjected to hydration under a thermal gradient in field and laboratory tests. No post-mortem structural modifications of the smectite were observed; however, dissolution and precipitation of species occurred, conditioned by the type of bentonite and hydration water. These processes were accompanied by the modification of the exchangeable cation complex. Determination of the hydromechanical properties of expansive clay at elevated temperatures is challenging owing to experimental and interpretation issues. In most cases, a reduced swelling pressure was obtained when the temperature increased, particularly at higher dry densities. These results may have been affected by the experimental protocols, use of bentonite or purified smectite, and exchangeable cations. Even at the highest temperatures, bentonite can fill voids and develop large swelling pressures at high densities. Thermo-hydro-mechanical models were developed or upgraded during the project to include thermal phenomena and dependencies and were applied to the simulation of new laboratory thermo-hydraulic tests in cells., The author(s) declare that financial support was received for the research and/or publication of this article. European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No 847593., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydro-mechanical response to gas transfer of deep argillaceous host rocks for radioactive waste disposal

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Marschall, Paul
  • Levasseur, Severine
During recent decades, argillaceous sedimentary formations have been studied as potential host formations for the geological disposal of long-living and heat-emitting radioactive waste—Boom Clay in Belgium and Opalinus Clay and Brown Dogger in Switzerland. A significant issue in the long-term performance of these potential host rocks concerns the generation and transport of gases. The pressure resulting from the generation of gas in an almost impermeable geological medium in the near field of a repository will increase. Under high gas pressures, the mechanical and hydraulic properties of the host rock are expected to change significantly. Preferential gas pathways may develop which exploit material heterogeneity, anisotropy (bedding planes), rock discontinuities, or interfaces between the different components of the repository, and may eventu- ally lead to the release of the produced gases. Gas flow through these clayey rocks is investigated on the basis of laboratory work. Priority has been given to studying the volume change response of these initially water-saturated materials through relatively fast and controlled volume-rate gas injections. The effect of the gas injection rate, the confining pressure and the bedding orientation on the gas transport properties have been studied with particular attention paid to the coupling with strain behaviour. The results have shown features common to the three formations concerning the gas transfer process through preferential pathways, despite their initially differential properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work is funded by the European Joint Programme on Radioactive Waste Management (EURAD WP-GAS) within the Horizon 2020-Euratom programme under grant agreement No 847593 (2019–2024). Past research contracts with NAGRA (National Cooperative for the Disposal of Radioactive Waste, Switzerland) and ONDRAF/NIRAS (Belgian Agency for Radioactive Waste and Enriched Fissile Materials) also provided funding., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Self-sealing of boom clay after gas transport

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Levasseur, Severine
In the geological disposal of high-level radioactive waste in argillaceous rocks, studying the barrier integrity after gas transport and the pathway closure thanks to self-sealing capacity is a crucial aspect for the safety assessment. This paper presents experimental research in Boom Clay (a potential host rock in Belgium) to evaluate the effectiveness of self-sealing and possible fissure reactivation during a second gas invasion event. Initial water permeability under oedometer conditions was first measured on samples at two bedding orientations, being higher the sample with bedding planes parallel to flow, highlighting marked anisotropy. Then, gas injection tests at a constant volume rate were performed. Results indicated that Boom Clay underwent expansion and degradation during gas injection due to the development of fissures that were quantified using microstructural techniques. The computed effective gas permeability was not significantly dependent on bedding orientation and was slightly larger than the initial intrinsic water permeability. The re-saturation of the samples led to a recovery of the initial water permeability for both orientations, replicating the original anisotropy. The microstructural analyses confirmed the gas pathways’ closure, indicating good self-sealing and the regaining of the hydraulic barrier function. However, a small volume of large unconnected pores was detected on undrained unloading before the microstructural study. An additional gas injection after the self-sealing resulted in a higher effective gas permeability and a larger increase in pore volume, suggesting the reopening of fissures generated during the first injection. Finally, the experimental data were compiled within a multi-scale phenomenological model to relate the microstructural information to macroscopic flow transport properties capturing the intrinsic permeability increase on gas invasion and its recovery during self-sealing., This project has received funding from the Euro- pean Union’s Horizon 2020 research and innovation programme ‘Euro- pean Joint Programme on Radioactive Waste Management (EURAD)’ (2019–2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under Grant agreement No. 847593. In addition, the acknowledgements are extended to the Belgian Agency for Radioactive Waste and Enriched Fissile Materials (ONDRAF/NIRAS) for fund- ing this research program under contract No. CCHO 2021-0377/00/00 (2021–2024)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The importance of the microstructure on hydro-mechanical behaviour of compacted granular bentonite

  • Zeng, Hao
  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Fraccica, Alessandro
Granular bentonite (GB) with extended grain size distribution, a candidate material to construct engineered barriers, has low water permeability, high swelling potential and self-sealing capacity and is desirable in portability and workability. However, few systematic data combining microstructural descriptions and hydro-mechanical (HM) behavioural features are available. The present work investigates the HM performance of Wyoming (MX80)-type GB samples compacted at different initial water contents and at a fixed dry density of 1550 kg/m3. The samples' microstructure and its evolution along stress paths were studied using X-ray micro-computed tomography and mercury intrusion porosimetry. The results highlighted that the compacted GB presented local density heterogeneity and a multi-porosity network. Compaction at low initial water content increased the proportion of macropores and contributed to the enhancement of the compressibility and collapse on wetting under high stresses. During isochoric saturation, two stages of swelling development were identified. First, the flooding of macropores and matric suction reduction was related to the initial increase in swelling pressure. The secondary swelling was due to the water absorption of clay sheets in micropores and the expansion of micropores within granules and aggregates, during which the density of pore water increased. A decrease in the compaction water content can result in a higher pore water density after isochoric saturation and a lower water permeability. Finally, the water retention behaviour of the compacted sample within drying/wetting cycles was less sensitive to the initial pore size distribution. The current outcomes underline the critical role of the microstructure on the HM behaviour of compacted GB., This project has received funding from the European Union's Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP GAS ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. The authors acknowledge the support of NAGRA (National Cooperative for the Disposal of Radioactive Waste) through the project ‘Scientific work related to barrier integrity’ Ref 18722 (2019-2024). The first author has received funding from the China Scholarship Council (CSC, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fully coupled THM constitutive model for clay rocks: formulation and application to laboratory tests

  • Song, Fei
  • Gens Solé, Antonio
  • Collico, Stefano
  • Grgic, Dragan
  • Wang, Huaning
This study presents a fully coupled thermo-hydro-mechanical (THM) constitutive model for clay rocks. The model is formulated within the elastic-viscoplasticity framework, which considers nonlinearity and softening after peak strength, anisotropy of stiffness and strength, as well as permeability variation due to damage. In addition, the mechanical properties are coupled with thermal phenomena and accumulated plastic strains. The adopted nonlocal and viscoplastic approaches enhance numerical efficiency and provide the possibility to simulate localization phenomena. The model is validated against experimental data from laboratory tests conducted on Callovo-Oxfordian (COx) claystone samples that are initially unsaturated and under suction. The tests include a thermal phase where the COx specimens are subjected to different temperature increases. A good agreement with experimental data is obtained. In addition, parametric analyses are carried out to investigate the influence of the hydraulic boundary conditions (B.C.) and post-failure behavior models on the THM behavior evolution. It is shown that different drainage conditions affect the thermally induced pore pressures that, in turn, influence the onset of softening. The constitutive model presented constitutes a promising approach for simulating the most important features of the THM behavior of clay rocks. It is a tool with a high potential for application to several relevant case studies, such as thermal fracturing analysis of nuclear waste disposal systems., This work was funded by the European Union's Horizon 2020 research and innovation programme under a grant agreement (Grant No. 847593), partially supported by the Fundamental Research Funds for the Central Universities (Grant No. 22120240029). The authors thank the organizing Committee of Unsat-Waste2023 for their invitation to contribute to the special issue “Unsat-Waste2023"., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling the hydration of bentonites under isothermal and non-isothermal conditions using a double-porosity approach

  • Pacelli, Rubem Vasconcelos
  • Gens Solé, Antonio
  • Rodríguez Romero, Carlos Eduardo
  • Vaunat, Jean
The constitutive model for expansive materials described here follows the usual double-porosity approach that represents the clay soil as two overlapping pore media (microstructure and macrostructure) coupled through a micro-macro strain mechanism. However, the current formulation also includes a local water mass transfer controlling the saturation of the microstructure, the definition of water retention curves for each structural level, and the occurrence of thermal strains in both pore domains. These additional features enhance the model's ability to simulate the response of bentonites under varying moisture conditions. This double-porosity model satisfactorily simulated some infiltration tests taken from the literature, reproducing the main test observations and validating its use for predicting the behaviour of bentonites in various geotechnical engineering scenarios. The infiltration tests selected were carried out in columns made of FEBEX and MX-80 bentonites under isothermal and non-isothermal conditions to characterize the main hydro-mechanical and thermo-hydro-mechanical processes that occur within a bentonite barrier hydrated under confined conditions. The numerical simulations showed that structural changes in bentonite materials during the transient hydration phase are due to the irreversible response of the macrostructure (changes in macroporosity) but also depend on the mechanisms controlling the saturation of the microstructure., The work presented in this paper was developed in the framework of the Bentonite Mechanical Evolution Project (BEACON) and the European Joint Programme on Radioactive Waste Management (EURAD-HITEC) and received funding from the Euratom Research and Training Programme 2014-2018 under grant agreement N◦ 745942 and from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement n◦ 847593, respectively. The support of Conacyt (Id. N◦ 710153) to the third author is gratefully acknowledged. The financial and technical support of ENRESA is also gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydro-mechanical modelling of gas transport processes in clay materials using a multi-scale approach

  • Corman, Gilles
  • González Blanco, Laura
  • Levasseur, Severine
  • Collin, Frédéric
Deep geological disposal is the preferred solution for radioactive waste management in many countries, including Belgium, where the Boom Clay is one of the potential candidate host formations. Over the long term, corrosion mechanisms are expected to release large amounts of gas that will rise in pressure and activate different gas transport processes in the system and the surrounding geological formation. Assessing which transfer mode prevails under which range of pressure conditions in the sound rock layers remains a major issue. This paper presents a multi-scale Hydro-Mechanical (HM) model capturing the influence of the microstructure features on the macroscopic gas flow, and especially the emergence of preferential gas-filled pathways. A detailed constitutive model for partially saturated clay materials is developed from experimental data to perform the modelling of a Representative Element Volume (REV), and integrated into a multi-scale scheme using homogenisation and localisation techniques for the transitions to the macroscopic scale. Using this tool, numerical modelling of a gas injection test in the Boom Clay is performed with the aim of improving the mechanistic understanding of gas transport processes in natural clay barriers., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparative study of gas testing protocols in clayey rocks for nuclear waste repositories

  • González Blanco, Laura
  • Llabjani, Qazim
  • Romero Morales, Enrique Edgar
  • Ferrari, Alessio
  • Laloui, Lyesse
  • Marschall, Paul
Understanding gas transport processes in clay barriers is crucial for assessing the long-term safety of geological repositories for radioactive waste. Fundamental and well-designed experimental research at the laboratory scale is an indispensable prerequisite for conceptualising gas transport mechanisms and their simulation at repository scales. In practice, however, it turns out that comparing gas invasion experiments on argillaceous rock samples is difficult since different laboratories use different test protocols. This paper presents a collaborative and comparative study conducted by two teams from the Geotechnical Laboratory at the Universitat Politècnica de Catalunya (UPC, Spain) and the Laboratory of Soil Mechanics at the Swiss Federal Institute of Technology of Lausanne (LMS/EPFL, Switzerland), carried out as part of the European Joint Programme EURAD. Both teams employed equivalent gas testing protocols to characterise two argillaceous host rocks: Boom Clay (Belgium) and Opalinus Clay (Switzerland). The integrated workflow enabled the determination of common features regarding the hydro-mechanical response of the tested samples. This research underscores the importance of verifiable testing methods to enhance the understanding of gas transport in geological repositories. The results highlight the benefits of coordinated efforts and shared methodologies in advancing geotechnical research and fostering collaboration among national agencies., It is acknowledged the funding received from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593 and from Nagra (Nationale Genossenschaft für die Lagerung radioaktiver Abfälle) under contracts No. 18713 and No. 18722. The first and third authors also acknowledge the financial support of the INTERMO2 project (PID2022141429OB-I00) funded by the Spanish Ministry of Science/Research Agency CIN/AEI/10.13039/501100011033/FEDER EU (2023-2027) and from ONDRAF/NIRAS under contract No. CCHO 2024-0374/00/00 (2024-2026)., Postprint (author's final draft)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Failure mechanisms in unirradiated ZIRLO® cladding with radial hydrides

  • Ruiz Hervias, Jesus|||0000-0002-2938-6192
  • Simbruner, K.
  • Cristobal Beneyto, Miguel|||0000-0002-9154-1368
  • Perez Gallego, Daniel|||0000-0001-8834-2651
  • Zencker, U.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Spent nuclear fuel management, characterisation, and dissolution behaviour: progress and achievement from SFC and DisCo

  • Sjöland, Anders
  • Christensen, Petra
  • Zetterström Evins, Lena
  • Bosbach, Dirk
  • Duro, Lara
  • Farnan, Ian
  • Metz, Volker
  • Zencker, Uwe
  • Ruiz Hervias, Jesus|||0000-0002-2938-6192
  • Rodríguez Villagra, Nieves
  • Király, Márton
  • Schillebeeckx, Peter
  • Rochman, Dimitri
  • Seidl, Marcus
  • Dagan, Ron
  • Verwerft, Marc
  • Herranz Puebla, Luis Enrique
  • Hordynskyi, Dmitri
  • Feria, Francisco|||0000-0001-7194-2853
  • Vlassopoulos, Efstathios