Pasar al contenido principal

HERRAMIENTAS PARA LA OBSERVACION, INTERPRETACION Y MODELACION DE LA INTERACCION Y MOVIMIENTO MULTIFASICO EN MEDIO POROSO APLICADO A LAS INFRAESTRUCTURAS PARA LA ENERGIA Y LA M

PID2022-141429OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Digital image-based measurement of degree of saturation on moving soil

  • Morales Flauzin, Gerardo
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Alvarado Bueno, Mauricio
  • Alonso Pérez de Agreda, Eduardo|||0000-0003-2472-3951
This paper presents a novel methodology that combines Particle Image Velocimetry - Numerical Particles (PIV-NP) and Short-Wave Infrared Spectral Imaging for the non-invasive measurement of displacements and degree of saturation on moving soils. This allows for continuous monitoring and visualization of soil behavior and provides valuable insight into the deformation patterns and moisture evolution. The method was applied to a small-scale dam failure experiment. The methodology offers an integrated, comprehensive, and non-invasive approach to investigating soil physical models by simultaneously measuring displacements, strains, velocities, and degree of saturation in soils in motion., Project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Gas transportbehaviourofbentonite/sandmixtures used insealingsystems

  • Mesa Alcantara, Arisleidy
  • Torres Serra, Joel|||0000-0002-2267-4570
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • De La Vaissiere, Remi
  • Talandier, Jean
Bentonite/sand brick mixtures installed at hygroscopic water content are currently considered for use in sealing systems for the deep and long-term disposal of radioactive wastes. The transport mechanisms of gas through bentonite/sand sealing materials at varying saturation levels represent a critical factor in the overall performance and integrity of the sealing system. Hence, several helium gas injection/dissipation tests were performed at constant total vertical stress or constant volume conditions at different dry densities and degrees of saturation of the mixture to understand the complex gas transport processes. The results provided the variation of the effective gas, The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Compressibility of a binary bentonite-based mixture with particular emphasis on pellet orientation

  • Mesa Alcantara, Arisleidy
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Torres Serra, Joel|||0000-0002-2267-4570
  • Mokni, Nadia
Binary mixtures of Wyoming-type bentonite, consisting of 80 % mass high-density pellets and 20 % granular bentonite, are currently considered candidate materials for the French concept of vertical sealing systems for deep and long-term disposal of radioactive wastes. At low emplacement water contents, the hydro-mechanical behaviour is primarily controlled by contact forces between pellets, forming a coarse grain-supported structure over which granular bentonite is poured. These pellets were uniaxially compacted at elevated stresses to reach high dry densities. Subsequent pellet unloading resulted in anisotropic features due to fissuring and delamination, followed by water absorption. This study investigated compressibility changes upon loading under laterally confined conditions of a well-oriented pellet-supported structure, mimicking the setup of the in situ VSEAL 1 experiment at Tournemire (France). Two pellet orientations at the same dry density and coordination number of pellet contacts were examined in a pure pellet skeleton and a mixture to account for potential heterogeneity during pouring. A discrete element method was used to simulate the compression results with pellets represented as a clump with a heterogeneous void ratio distribution due to fissuring. These simulations were instrumental in understanding the important anisotropic deformation properties of pellet-supported structures under two distinct orientations., The authors thank the financial support of ‘Institut de Radioprotection et de Sûreté Nucléaire’ IRSN (France) through different collaboration agreements with CIMNE (Spain) within the context of the VSEAL Project ‘Long-term performance of vertical sealing systems and impact of gas migration’ (2016-2023). The second and third authors also thank project PID2022-141429OB-I00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027) and the Spanish Ministry of Universities, who awarded the third author a ‘Margarita Salas’ post-doctoral fellowship (2022-2024)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Gas migration in low-permeability clay-based barriers

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Gas migration in low-permeability materials has become a critical focus in energy and environmental geotechnics, particularly for managing the deep geological disposal of radioactive waste. Such waste can release radionuclides over hundreds of thousands of years, making it vital to understand the long-term processes occurring in repositories. Among these, significant gas volume generation, accumulation, and release are of great concern. While these processes vary depending on waste type and repository design, they must be addressed in all safety assessments. To this end, an experimental program was developed to investigate how excessive gas pressures induce damage in clay-rich geomaterials using materials from artificial (granular bentonite) and natural (argillaceous rock) barriers. Evidence suggests that gas preferentially flows through preferential pathways. Microstructural analyses conducted before and after gas injection provide insights into failure mechanisms, including the pore and fracture network geometric descriptors in intact and damaged materials. The self-sealing capacity of these materials was also evaluated using the same gas injection setup. A resaturation stage assesses water conductivity to quantify the potential loss of its hydraulic barrier function. These findings contribute to the safety case for repositories by improving our understanding of gas-induced damage and the resilience of engineered barriers., The authors acknowledge the financial support from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from the project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modelling offshore cable-soil interaction during pull-in operations with the material point method (MPM)

  • Maglia Espinàs, Mateu
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Hoffmann Jauge, Christian Amadeo
In a context of climate emergency decarbonization of energy is one of the main goals at the global level, and renewable energies are growing in share to substitute energy traditionally coming from hydrocarbons. The offshore environment has traditionally been used by oil and gas extraction industry, and now the accumulated knowledge in this field can be transferred to renewable energies such as offshore wind power plants. Both industries need to transport the energy onshore by pipelines or cables that are usually laid on soil surface relying only on soil bearing capacity to withstand installation and service loads. The assessment of soil reaction to embedment and lateral pipe movement is a key aspect to correctly install and dimension these structures. Material remolding and deformation in cable installation and service can play an important role in soil reaction as occurs in unburied pipe-soil interaction problems. For that reason, including large deformation analysis can have some benefits over classical bearing capacity solutions or standard finite element method (FEM) analysis. In this study, the material point method (MPM) implemented in the open-source code Anura3D, able to simulate large deformations and soil-water-structure interaction, is selected to study pipe/cable-soil interaction. The contact formulation, based on a velocity predictor-corrector scheme is addressed and improved. The numerical approach and its developments are validated against an instrumented centrifuge experiment in which a rigid pipe interacts with saturated sandy soil. The results compared with a current industry procedure known as the “wished-in-place” (WIP) method. This method is based on standard FEM analysis and cannot simulate large deformations or account for material remolding; instead, the deformed geometry is imposed directly. This work shows that MPM is a powerful tool to address problems where large deformation plays an important role., The first author acknowledges the support of Secretariat for Universities and Research of the Generalitat de Catalunya. through the Joan Oró grant (ref. BDNS 657443). The second author thanks the financial support received from the Serra Húnter Program put forward by the Department of Enterprise and Knowledge of the Secretariat for Universities and Research of the Generalitat de Catalunya. The authors acknowledge the financial support of the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER and Union Europea NextGenerationEU/PRTR. The authors also acknowledge the support of Anura3D MPM Research Community., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling wetting collapse, failure and deposition of an unsaturated slope with material point method

  • Carluccio, Gaia di|||0000-0001-7748-2317
  • Avilés Murcia, Luis Ángel|||0000-0002-9235-2374
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Alonso Pérez de Agreda, Eduardo|||0000-0003-2472-3951
The paper presents the modelling of unsaturated soils with the material point method (MPM), including the effect of wetting leading to the loss of strength and the volumetric collapse. The elastoplastic Clay and Sand Model (CASM) extended to unsaturated conditions, formulated in terms of Bishop's stress and suction, has been implemented in an MPM-based computational tool, in which gas density and pressure is assumed constant. The implementation of infiltration and seepage boundary conditions, required for wetting problems, are discussed and validated. A centrifuge experiment involving the construction, wetting, failure and post-failure of a slope is interpreted and reproduced by the MPM-based tool. Centrifuge data captured by video images, first analysed by particle image velocity (PIV) and then improved by the PIV-numerical particle (NP) procedure, provides the motion and deformation of the entire experiment and is compared with calculations. The measured response of a 1D column of the model slope during the first stages of the test provided a first approximation of the constitutive parameters. The finally adopted set of model parameters led to a proper simulation of the entire response of the slope during wetting pre- and post-failure stage., This study was supported by the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER and Union Europea NextGenerationEU/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integrated characterisation of bentonite pellet structures for in situ test installation

  • Torres Serra, Joel|||0000-0002-2267-4570
  • Mesa Alcantara, Arisleidy
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Bentonite pellet-based mixtures are currently investigated as candidate materials in large-scale in situ sealing experiments such as the Vertical SEALing project by the Institute for Radiological protection and Nuclear Safety (IRSN, France) due to their expected gap-filling capacity in engineered barrier systems for the geological disposal of radioactive waste. In the short term, after installation, the hydro-mechanical behaviour of these pellet-based structures is governed by pellet-pellet interactions, which have been characterised experimentally by oedometer compression tests and numerically by discrete-element modelling of single-layered pellet skeleton samples. In this work, we integrate these experimental and numerical tools to characterise the compressibility of three-layered pellet-based structures with axis-oriented arrangements. We validate the simulated deformation of bentonite pellet samples against experimental data and analyse the evolution of the dry density distribution and axial stiffness along the oedometer compression curve. Our integrated approach has implications for the emplacement and monitoring in situ tests on multi-layered pellet-based barrier systems., The authors are grateful for the financial support provided by IRSN (France) through different collaboration agreements with CIMNE (Spain) within the framework of the VSEAL project. The first and third authors also thank project PID2022-141429OB-I00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU and the Spanish Ministry of Universities, who awarded the first author the 2021UPC-MS-67340 ‘Margarita Salas ’ post-doctoral fellowship.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploring rate and temperature effects on residual strength. Review and implications for a landslide case study, Exploration des effets de la vitesse et de la température sur la résistance résiduelle. Examen et implications pour une étude de cas de glissement de terrain

  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • García Núñez, Luis Miguel
  • Lloret Morancho, Antonio|||0000-0001-7991-8487
  • Alvarado, Mauricio
A large landslide immediate to a reservoir, identified in 2006, is the guiding case to discuss its triggering, namely a consequence of fast reservoir drawdown, and its post-failure response. The reactivation of the landslide, twelve years later, allowed the validation of some hypotheses assumed in the first study (2012). The risk of landslide acceleration, for a constant residual friction and an assumed thermal pressurization of the sliding surface, was not realistic since the landslide never accelerated. In recent years, efforts have been addressed to gain further knowledge by developing advanced numerical tools and a better understanding of clay shear strength. The paper presents the developments achieved. The results of a comprehensive experimental program to investigate the effect of shear strain rate and temperature are presented for a variety of soil types. The expected landslide response under rapid drawdown conditions was simulated by a material point method-based numerical tool that handles, in a dynamic formulation, large displacements and soil /rock materials characterized by temperature, strain rate, and strain softening dependence. The risk of landslide acceleration, predicted in the 2012 analysis looks, at present, as a remote event., Acknowledge the support of Ministeri de Ciència i Innovació (MICIN), Agencia Estatal de Investigación (AEI) and el Fons Europeu de Desenvolupament Regional (FEDER) in the framework of the research project PID2022-141429OB-I00. The first author, Associate Professor Serra Húnter, gratefully acknowledges the funding from the Departament de Recerca and Universitats de la Generalitat de Catalunya.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploring the role of the granular skeleton on the swelling pressure of heavily compacted bentonite/sand mixtures

  • Torres Serra, Joel|||0000-0002-2267-4570
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Mesa Alcantara, Arisleidy
The contribution of the stiff sand skeleton in compacted bentonite/sand mixture hydration was investigated through experiments and numerical simulations. The final swelling pressure for various bentonite/sand proportions (40/60, 60/40, 100/0) was measured under constant volume and fully saturated conditions. Discrete element modelling was used to reproduce the confining effect of the sand skeleton in mixtures compared to granular bentonite at an equivalent dry density of the bentonite. A good agreement between model results and measurements will enable the identification of the main mechanisms, the roles played by the stiffness of the skeletal and filling components and their critical fractions, which will be relevant for the fabrication of high-density B/S bricks used in large-scale sealing experiments (e.g., the ‘Noyau de SCellement’ NSC Experiment, Bure, France)., The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Soil testing at different scales: from micro-experiments to field tests in earthworks

  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
<jats:p>Examples of upscaling phenomena with experimental techniques are presented and discussed within the framework of compacted soils for hydraulic and environmental earthworks and engineered barriers for the energy sector. A series of laboratory experiments at different scales are presented and interpreted to focus on the need for experimental upscaling in compacted soils since distinctive behavioural features can only be detected at specific length scales. Permeability results on fine-grained soils and artificially prepared sand/bentonite mixture at different scales will be discussed with microstructural tests regarding ‘dry’ or ‘wet side’ compaction, element and mock-up tests on compacted soils in the laboratory, and field tests on a compacted trial embankment and demonstration test to explore anisotropic and heterogeneous features. The presented examples will help to motivate new experimental research subjects and promote experimental protocols at different scales ranging from mm-scale (micro), cm-scale element tests, dm-scale mock-ups and m-scale (trial/demonstration tests) to help understand and approach some fundamental questions observed at the application scale of compacted soils.</jats:p>, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Levasseur, Séverine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hydro-mechanical and gas transport (HM-G) characterization of sand/bentonite mixture within the framework of the Gas Permeable Seal Test (GAST)

  • Toprak, Erdem|||0000-0001-9006-3504
  • Olivella Pastallé, Sebastià|||0000-0003-3976-4027
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Fraccica, Alessandro
  • Lanyon, B.
The sand/bentonite (S/B) mixture is considered as a candidate sealing and backfilling material for Switzerland’s deep geological repository (DGR). Using S/B mixtures as sealing material offers key advantages, such as higher intrinsic gas permeability and lower swelling pressure, which enhance gas transport efficiency. These properties make the S/B mixture a strong candidate for use as a gas-permeable seal within the Engineered Gas Transport System (EGTS) concept. This study investigates hydro-mechanical and gas transport (HM-G) response of the S/B mixture, incorporating the effects of dynamic compaction-induced variability in dry density. Key properties of the S/B mixture, such as porosity-dependent and strain-dependent water retention curves (WRC), effective and intrinsic water and gas permeability, and mechanical parameters, were calibrated while accounting for the multiscale heterogeneity in dry density and effective gas permeability of the system. Laboratory-scale simulations of oedometer and swelling pressure tests were conducted to support the parametrization of the mechanical model. The simulations were performed using CODE_BRIGHT, a Finite Element Method (FEM) program. Advanced geo-mechanical models, including the Barcelona Basic Model (BBM), the Barcelona Expansive Model (BExM), and strain-dependent permeability, were utilized to characterize the material behavior., Financial support has been granted by the National Cooperative for the Disposal of Radioactive Waste of Switzerland (Nagra) through a collaboration agreement with CIMNE (Spain). The authors thank Clara Alvarado, Thomas Spillmann, Emiliano Stopelli, Stefan Finsterle, Stratis Vomvoris and Alexandros Papafotiou for technical assistance and useful discussions. The authors acknowledge support from project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU and the Spanish Ministry of Universities., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of gap-sealing on hydro-mechanical behaviour of granular bentonite

  • Zeng, Hao
  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Granular bentonite (GB), offering better pourability and workability than traditional powder bentonites, has been proposed as a candidate material for engineered barriers in deep geological repositories of radioactive waste. During service, involving complex hydro-mechanical (HM) stress paths, GB barriers are expected to seal technological gaps within the system. However, few studies have examined the HM behaviour of GB related to gap sealing. To address this, a technological gap was initially fabricated within the compacted GB samples used for HM testing. The gap enhanced the compressibility of the sample, promoting a hardening effect under high stress and thereby reducing the volumetric collapse during subsequent wetting. Under low stress, the gap accelerated the hydration swelling, while the final swelling strain depended on the sample’s initial global dry density. Similarly, gap sealing had little effect on the development of swelling pressure when the sample was wetted under constant volume. Furthermore, the water permeability after saturation at a comparable global void ratio was higher in the initially gapped sample than in the intact one. These findings are anticipated to support a long-term safety assessment of GB barriers., This project has received funding from the European Union’s Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP GAS ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. The authors acknowledge the support of NAGRA through the project ‘Scientific work related to barrier integrity’ Ref 18722 (2019-2024). All authors also thank project PID2022141429OB-I00, funded by the Spanish Ministry of Science/Research Agency 501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling the evolutionary stiffness of granular bentonite mixtures

  • Navarro Gámir, Vicente
  • Tengblad, Erik
  • López-Vizcaíno, Rubén
  • Torres Serra, Joel|||0000-0002-2267-4570
  • Asensio, Laura
The multimodal and evolutive pore size distribution of granular bentonite mixtures makes it advisable to adopt a triple porosity approach for the macroscopic modelling of their hydromechanical behaviour under different water content conditions. These models must integrate the evolutive effect of compressibility of the megapores between the bentonite grains on the overall stiffness of the mixture. This work proposes a strategy for this integration which, while assuming a constant compressibility of the megaporosity, allows an evolutionary expression for the overall stiffness of the mixture to be obtained. To evaluate the scope of this proposal, the hydration of two mixtures with very different initial packing is analysed. Both analyses start from dry conditions (89 MPa suction) and end in full saturation. Therefore, their analysis requires modelling the behaviour of the granular bentonite mixture for the whole range of structural organisation it can have. It is therefore a very demanding qualification exercise in which, despite the simplicity of the proposed formulation, very satisfactory results have been obtained., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Layered construction process with the material point method

  • Avilés Murcia, Luis Ángel|||0000-0002-9235-2374
  • Carluccio, Gaia di|||0000-0001-7748-2317
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
This paper presents a novel procedure to simulate layered construction processes with the material point method (MPM), a method suitable for modelling large deformations. For the first time, the paper provides the MPM with the capability of modelling the behaviour of earth structures from their construction until the eventual post-failure behaviour in an integrated manner without requiring, as currently done, the use of other numerical tools for the construction simulation. In addition, the proposed methodology includes the option of simulating the engineering practice of compensating settlements that occurred during construction, to match the designed geometry. This option, typically neglected in alternative numerical methods, is implemented by filling the computational elements of the layers that become empty by adding new material points. The construction process proposed and its numerical implementation into an open-source code are described in detail. The validation is carried out by modelling an elastic oedometric column with varying number of layers and by comparing it with analytical solutions and finite element-based results. The construction of a soil embankment in dry, saturated, and partially saturated conditions is also simulated. It shows the capability of the method to capture the excess pore water pressures that may develop., The authors acknowledge the financial support of the project PDC2022-133222-100 and funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “European Union Next Generation EU/PRTR”, and the project PID2022-141429OB-100 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. They also acknowledge the support of the Anura3D MPM research community. The third author, a Serra Húnter associate professor, also offers thanks for the financial support received from the Serra Húnter Program put forward by the Department of Enterprise and Knowledge of the Secretariat for Universities and Research of the Generalitat de Catalunya, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Comparative study of gas testing protocols in clayey rocks for nuclear waste repositories

  • González Blanco, Laura|||0000-0003-3800-3007
  • Llabjani, Qazim
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Ferrari, Alessio
  • Laloui, Lyesse
  • Marschall, Paul
Understanding gas transport processes in clay barriers is crucial for assessing the long-term safety of geological repositories for radioactive waste. Fundamental and well-designed experimental research at the laboratory scale is an indispensable prerequisite for conceptualising gas transport mechanisms and their simulation at repository scales. In practice, however, it turns out that comparing gas invasion experiments on argillaceous rock samples is difficult since different laboratories use different test protocols. This paper presents a collaborative and comparative study conducted by two teams from the Geotechnical Laboratory at the Universitat Politècnica de Catalunya (UPC, Spain) and the Laboratory of Soil Mechanics at the Swiss Federal Institute of Technology of Lausanne (LMS/EPFL, Switzerland), carried out as part of the European Joint Programme EURAD. Both teams employed equivalent gas testing protocols to characterise two argillaceous host rocks: Boom Clay (Belgium) and Opalinus Clay (Switzerland). The integrated workflow enabled the determination of common features regarding the hydro-mechanical response of the tested samples. This research underscores the importance of verifiable testing methods to enhance the understanding of gas transport in geological repositories. The results highlight the benefits of coordinated efforts and shared methodologies in advancing geotechnical research and fostering collaboration among national agencies., It is acknowledged the funding received from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593 and from Nagra (Nationale Genossenschaft für die Lagerung radioaktiver Abfälle) under contracts No. 18713 and No. 18722. The first and third authors also acknowledge the financial support of the INTERMO2 project (PID2022141429OB-I00) funded by the Spanish Ministry of Science/Research Agency CIN/AEI/10.13039/501100011033/FEDER EU (2023-2027) and from ONDRAF/NIRAS under contract No. CCHO 2024-0374/00/00 (2024-2026).
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Gas migration in low permeability clay-based barriers

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Gas migration in low-permeability materials has become a critical focus in energy and environmental geotechnics, particularly for managing the deep geological disposal of radioactive waste. Such waste can release radionuclides over hundreds of thousands of years, making it vital to understand the long-term processes occurring in repositories. Among these, significant gas volume generation, accumulation, and release are of great concern. While these processes vary depending on waste type and repository design, they must be addressed in all safety assessments. To this end, an experimental program was developed to investigate how excessive gas pressures induce damage in clay-rich geomaterials using materials from artificial (granular bentonite) and natural (argillaceous rock) barriers. Evidence suggests that gas preferentially flows through preferential pathways. Microstructural analyses conducted before and after gas injection provide insights into failure mechanisms, including the pore and fracture network geometric descriptors in intact and damaged materials. The self-sealing capacity of these materials was also evaluated using the same gas injection setup. A resaturation stage assesses water conductivity to quantify the potential loss of its hydraulic barrier function. These findings contribute to the safety case for repositories by improving our understanding of gas-induced damage and the resilience of engineered barriers., The authors acknowledge the financial support from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from the project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Probabilistic large-deformation modelling of tunnel face collapse using random material point method (RMPM) incorporating cross-correlated random fields

  • Zhang, Tong
  • Ji, Jian
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
Accurate prediction of tunnel collapse and post-failure ground deformation is critical for safe urban tunnelling. Conventional deterministic analyses usually assume homogeneous ground with mean properties and therefore may not capture the effects of spatially variable soil strength. This study develops a probabilistic largedeformation framework by coupling the Material Point Method with random field theory (RMPM) to simulate tunnel collapse in spatially variable soils. Cross-correlated lognormal random fields of effective cohesion, c', and effective friction angle, f', are generated using the Karhunen–Lo` eve expansion combined with a Choleskydecomposition-based linear coregionalization model (LCM) and the Nataf transformation, and Monte Carlo simulations are conducted to quantify the statistics of the upper-tail material point displacement and the maximum surface settlement. The MPM model is validated against physical model tests and other published results, showing good agreement in final collapse geometry. Results show that positive c' f' correlation slightly increases the mean collapse extent and amplifies response variability, whereas negative correlation has a stabilizing effect. Sensitivity analyses further show that vertical correlation length exerts a stronger influence on collapse propagation than the horizontal one, as smaller vertical correlation lengths tend to form stratified strength barriers that block upward failure development. The proposed RMPM framework provides a useful tool for probabilistic tunnel-collapse assessment under spatially variable ground conditions., The authors acknowledge the financial support by the National Natural Science Foundation of China (GRANT NOS: U22A20594). The authors acknowledge the financial support of the project PID2022-141429OB-I00 funded by MCIN/AEI/ 10.13039/501100011033/FEDER, UE, and the Serra Húnter Program put forward by the Department of Enterprise and Knowledge of the Secretariat for Universities and Research of the Generalitat de Catalunya. The authors also acknowledge the support of Anura3D MPM Research Community. The first author acknowledges the China Scholarship Council for the financial support (202406710011)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integrated characterisation of bentonite pellet structures for in situ test installation

  • Torres Serra, Joel
  • Mesa Alcantara, Arisleidy
  • Romero Morales, Enrique Edgar
Bentonite pellet-based mixtures are currently investigated as candidate materials in large-scale in situ sealing experiments such as the Vertical SEALing project by the Institute for Radiological protection and Nuclear Safety (IRSN, France) due to their expected gap-filling capacity in engineered barrier systems for the geological disposal of radioactive waste. In the short term, after installation, the hydro-mechanical behaviour of these pellet-based structures is governed by pellet-pellet interactions, which have been characterised experimentally by oedometer compression tests and numerically by discrete-element modelling of single-layered pellet skeleton samples. In this work, we integrate these experimental and numerical tools to characterise the compressibility of three-layered pellet-based structures with axis-oriented arrangements. We validate the simulated deformation of bentonite pellet samples against experimental data and analyse the evolution of the dry density distribution and axial stiffness along the oedometer compression curve. Our integrated approach has implications for the emplacement and monitoring in situ tests on multi-layered pellet-based barrier systems., The authors are grateful for the financial support provided by IRSN (France) through different collaboration agreements with CIMNE (Spain) within the framework of the VSEAL project. The first and third authors also thank project PID2022-141429OB-I00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU and the Spanish Ministry of Universities, who awarded the first author the 2021UPC-MS-67340 ‘Margarita Salas ’ post-doctoral fellowship., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Levasseur, Séverine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling wetting collapse, failure and deposition of an unsaturated slope with material point method

  • Carluccio, Gaia di
  • Avilés Murcia, Luis Ángel
  • Pinyol Puigmartí, Núria Mercè
  • Alonso Pérez de Agreda, Eduardo
The paper presents the modelling of unsaturated soils with the material point method (MPM), including the effect of wetting leading to the loss of strength and the volumetric collapse. The elastoplastic Clay and Sand Model (CASM) extended to unsaturated conditions, formulated in terms of Bishop's stress and suction, has been implemented in an MPM-based computational tool, in which gas density and pressure is assumed constant. The implementation of infiltration and seepage boundary conditions, required for wetting problems, are discussed and validated. A centrifuge experiment involving the construction, wetting, failure and post-failure of a slope is interpreted and reproduced by the MPM-based tool. Centrifuge data captured by video images, first analysed by particle image velocity (PIV) and then improved by the PIV-numerical particle (NP) procedure, provides the motion and deformation of the entire experiment and is compared with calculations. The measured response of a 1D column of the model slope during the first stages of the test provided a first approximation of the constitutive parameters. The finally adopted set of model parameters led to a proper simulation of the entire response of the slope during wetting pre- and post-failure stage., This study was supported by the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER and Union Europea NextGenerationEU/PRTR., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Exploring rate and temperature effects on residual strength. Review and implications for a landslide case study, Exploration des effets de la vitesse et de la température sur la résistance résiduelle. Examen et implications pour une étude de cas de glissement de terrain

  • Pinyol Puigmartí, Núria Mercè
  • García Núñez, Luis Miguel
  • Lloret Morancho, Antonio
  • Alvarado, Mauricio
A large landslide immediate to a reservoir, identified in 2006, is the guiding case to discuss its triggering, namely a consequence of fast reservoir drawdown, and its post-failure response. The reactivation of the landslide, twelve years later, allowed the validation of some hypotheses assumed in the first study (2012). The risk of landslide acceleration, for a constant residual friction and an assumed thermal pressurization of the sliding surface, was not realistic since the landslide never accelerated. In recent years, efforts have been addressed to gain further knowledge by developing advanced numerical tools and a better understanding of clay shear strength. The paper presents the developments achieved. The results of a comprehensive experimental program to investigate the effect of shear strain rate and temperature are presented for a variety of soil types. The expected landslide response under rapid drawdown conditions was simulated by a material point method-based numerical tool that handles, in a dynamic formulation, large displacements and soil /rock materials characterized by temperature, strain rate, and strain softening dependence. The risk of landslide acceleration, predicted in the 2012 analysis looks, at present, as a remote event., Acknowledge the support of Ministeri de Ciència i Innovació (MICIN), Agencia Estatal de Investigación (AEI) and el Fons Europeu de Desenvolupament Regional (FEDER) in the framework of the research project PID2022-141429OB-I00. The first author, Associate Professor Serra Húnter, gratefully acknowledges the funding from the Departament de Recerca and Universitats de la Generalitat de Catalunya., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydro-mechanical and gas transport (HM-G) characterization of sand/bentonite mixture within the framework of the Gas Permeable Seal Test (GAST)

  • Toprak, Erdem
  • Olivella Pastallé, Sebastià
  • Romero Morales, Enrique Edgar
  • Fraccica, Alessandro
  • Lanyon, B.
The sand/bentonite (S/B) mixture is considered as a candidate sealing and backfilling material for Switzerland’s deep geological repository (DGR). Using S/B mixtures as sealing material offers key advantages, such as higher intrinsic gas permeability and lower swelling pressure, which enhance gas transport efficiency. These properties make the S/B mixture a strong candidate for use as a gas-permeable seal within the Engineered Gas Transport System (EGTS) concept. This study investigates hydro-mechanical and gas transport (HM-G) response of the S/B mixture, incorporating the effects of dynamic compaction-induced variability in dry density. Key properties of the S/B mixture, such as porosity-dependent and strain-dependent water retention curves (WRC), effective and intrinsic water and gas permeability, and mechanical parameters, were calibrated while accounting for the multiscale heterogeneity in dry density and effective gas permeability of the system. Laboratory-scale simulations of oedometer and swelling pressure tests were conducted to support the parametrization of the mechanical model. The simulations were performed using CODE_BRIGHT, a Finite Element Method (FEM) program. Advanced geo-mechanical models, including the Barcelona Basic Model (BBM), the Barcelona Expansive Model (BExM), and strain-dependent permeability, were utilized to characterize the material behavior., Financial support has been granted by the National Cooperative for the Disposal of Radioactive Waste of Switzerland (Nagra) through a collaboration agreement with CIMNE (Spain). The authors thank Clara Alvarado, Thomas Spillmann, Emiliano Stopelli, Stefan Finsterle, Stratis Vomvoris and Alexandros Papafotiou for technical assistance and useful discussions. The authors acknowledge support from project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU and the Spanish Ministry of Universities., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Soil testing at different scales: from micro-experiments to field tests in earthworks

  • Romero Morales, Enrique Edgar
<jats:p>Examples of upscaling phenomena with experimental techniques are presented and discussed within the framework of compacted soils for hydraulic and environmental earthworks and engineered barriers for the energy sector. A series of laboratory experiments at different scales are presented and interpreted to focus on the need for experimental upscaling in compacted soils since distinctive behavioural features can only be detected at specific length scales. Permeability results on fine-grained soils and artificially prepared sand/bentonite mixture at different scales will be discussed with microstructural tests regarding ‘dry’ or ‘wet side’ compaction, element and mock-up tests on compacted soils in the laboratory, and field tests on a compacted trial embankment and demonstration test to explore anisotropic and heterogeneous features. The presented examples will help to motivate new experimental research subjects and promote experimental protocols at different scales ranging from mm-scale (micro), cm-scale element tests, dm-scale mock-ups and m-scale (trial/demonstration tests) to help understand and approach some fundamental questions observed at the application scale of compacted soils.</jats:p>, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compressibility of a binary bentonite-based mixture with particular emphasis on pellet orientation

  • Mesa Alcantara, Arisleidy
  • Romero Morales, Enrique Edgar
  • Torres Serra, Joel
  • Mokni, Nadia
Binary mixtures of Wyoming-type bentonite, consisting of 80 % mass high-density pellets and 20 % granular bentonite, are currently considered candidate materials for the French concept of vertical sealing systems for deep and long-term disposal of radioactive wastes. At low emplacement water contents, the hydro-mechanical behaviour is primarily controlled by contact forces between pellets, forming a coarse grain-supported structure over which granular bentonite is poured. These pellets were uniaxially compacted at elevated stresses to reach high dry densities. Subsequent pellet unloading resulted in anisotropic features due to fissuring and delamination, followed by water absorption. This study investigated compressibility changes upon loading under laterally confined conditions of a well-oriented pellet-supported structure, mimicking the setup of the in situ VSEAL 1 experiment at Tournemire (France). Two pellet orientations at the same dry density and coordination number of pellet contacts were examined in a pure pellet skeleton and a mixture to account for potential heterogeneity during pouring. A discrete element method was used to simulate the compression results with pellets represented as a clump with a heterogeneous void ratio distribution due to fissuring. These simulations were instrumental in understanding the important anisotropic deformation properties of pellet-supported structures under two distinct orientations., The authors thank the financial support of ‘Institut de Radioprotection et de Sûreté Nucléaire’ IRSN (France) through different collaboration agreements with CIMNE (Spain) within the context of the VSEAL Project ‘Long-term performance of vertical sealing systems and impact of gas migration’ (2016-2023). The second and third authors also thank project PID2022-141429OB-I00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027) and the Spanish Ministry of Universities, who awarded the third author a ‘Margarita Salas’ post-doctoral fellowship (2022-2024)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of gap-sealing on hydro-mechanical behaviour of granular bentonite

  • Zeng, Hao
  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
Granular bentonite (GB), offering better pourability and workability than traditional powder bentonites, has been proposed as a candidate material for engineered barriers in deep geological repositories of radioactive waste. During service, involving complex hydro-mechanical (HM) stress paths, GB barriers are expected to seal technological gaps within the system. However, few studies have examined the HM behaviour of GB related to gap sealing. To address this, a technological gap was initially fabricated within the compacted GB samples used for HM testing. The gap enhanced the compressibility of the sample, promoting a hardening effect under high stress and thereby reducing the volumetric collapse during subsequent wetting. Under low stress, the gap accelerated the hydration swelling, while the final swelling strain depended on the sample’s initial global dry density. Similarly, gap sealing had little effect on the development of swelling pressure when the sample was wetted under constant volume. Furthermore, the water permeability after saturation at a comparable global void ratio was higher in the initially gapped sample than in the intact one. These findings are anticipated to support a long-term safety assessment of GB barriers., This project has received funding from the European Union’s Horizon 2020 research and innovation programme ‘European Joint Programme on Radioactive Waste Management’ EURAD (2019-2024) WP GAS ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593. The authors acknowledge the support of NAGRA through the project ‘Scientific work related to barrier integrity’ Ref 18722 (2019-2024). All authors also thank project PID2022141429OB-I00, funded by the Spanish Ministry of Science/Research Agency 501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Exploring the role of the granular skeleton on the swelling pressure of heavily compacted bentonite/sand mixtures

  • Torres Serra, Joel
  • Romero Morales, Enrique Edgar
  • Mesa Alcantara, Arisleidy
The contribution of the stiff sand skeleton in compacted bentonite/sand mixture hydration was investigated through experiments and numerical simulations. The final swelling pressure for various bentonite/sand proportions (40/60, 60/40, 100/0) was measured under constant volume and fully saturated conditions. Discrete element modelling was used to reproduce the confining effect of the sand skeleton in mixtures compared to granular bentonite at an equivalent dry density of the bentonite. A good agreement between model results and measurements will enable the identification of the main mechanisms, the roles played by the stiffness of the skeletal and filling components and their critical fractions, which will be relevant for the fabrication of high-density B/S bricks used in large-scale sealing experiments (e.g., the ‘Noyau de SCellement’ NSC Experiment, Bure, France)., The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Gas migration in low permeability clay-based barriers

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
Gas migration in low-permeability materials has become a critical focus in energy and environmental geotechnics, particularly for managing the deep geological disposal of radioactive waste. Such waste can release radionuclides over hundreds of thousands of years, making it vital to understand the long-term processes occurring in repositories. Among these, significant gas volume generation, accumulation, and release are of great concern. While these processes vary depending on waste type and repository design, they must be addressed in all safety assessments. To this end, an experimental program was developed to investigate how excessive gas pressures induce damage in clay-rich geomaterials using materials from artificial (granular bentonite) and natural (argillaceous rock) barriers. Evidence suggests that gas preferentially flows through preferential pathways. Microstructural analyses conducted before and after gas injection provide insights into failure mechanisms, including the pore and fracture network geometric descriptors in intact and damaged materials. The self-sealing capacity of these materials was also evaluated using the same gas injection setup. A resaturation stage assesses water conductivity to quantify the potential loss of its hydraulic barrier function. These findings contribute to the safety case for repositories by improving our understanding of gas-induced damage and the resilience of engineered barriers., The authors acknowledge the financial support from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from the project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Layered construction process with the material point method

  • Avilés Murcia, Luis Ángel
  • Carluccio, Gaia di
  • Pinyol Puigmartí, Núria Mercè
This paper presents a novel procedure to simulate layered construction processes with the material point method (MPM), a method suitable for modelling large deformations. For the first time, the paper provides the MPM with the capability of modelling the behaviour of earth structures from their construction until the eventual post-failure behaviour in an integrated manner without requiring, as currently done, the use of other numerical tools for the construction simulation. In addition, the proposed methodology includes the option of simulating the engineering practice of compensating settlements that occurred during construction, to match the designed geometry. This option, typically neglected in alternative numerical methods, is implemented by filling the computational elements of the layers that become empty by adding new material points. The construction process proposed and its numerical implementation into an open-source code are described in detail. The validation is carried out by modelling an elastic oedometric column with varying number of layers and by comparing it with analytical solutions and finite element-based results. The construction of a soil embankment in dry, saturated, and partially saturated conditions is also simulated. It shows the capability of the method to capture the excess pore water pressures that may develop., The authors acknowledge the financial support of the project PDC2022-133222-100 and funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “European Union Next Generation EU/PRTR”, and the project PID2022-141429OB-100 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. They also acknowledge the support of the Anura3D MPM research community. The third author, a Serra Húnter associate professor, also offers thanks for the financial support received from the Serra Húnter Program put forward by the Department of Enterprise and Knowledge of the Secretariat for Universities and Research of the Generalitat de Catalunya, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling the evolutionary stiffness of granular bentonite mixtures

  • Navarro Gámir, Vicente
  • Tengblad, Erik
  • López-Vizcaíno, Rubén
  • Torres Serra, Joel
  • Asensio, Laura
The multimodal and evolutive pore size distribution of granular bentonite mixtures makes it advisable to adopt a triple porosity approach for the macroscopic modelling of their hydromechanical behaviour under different water content conditions. These models must integrate the evolutive effect of compressibility of the megapores between the bentonite grains on the overall stiffness of the mixture. This work proposes a strategy for this integration which, while assuming a constant compressibility of the megaporosity, allows an evolutionary expression for the overall stiffness of the mixture to be obtained. To evaluate the scope of this proposal, the hydration of two mixtures with very different initial packing is analysed. Both analyses start from dry conditions (89 MPa suction) and end in full saturation. Therefore, their analysis requires modelling the behaviour of the granular bentonite mixture for the whole range of structural organisation it can have. It is therefore a very demanding qualification exercise in which, despite the simplicity of the proposed formulation, very satisfactory results have been obtained., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Gas transportbehaviourofbentonite/sandmixtures used insealingsystems

  • Mesa Alcantara, Arisleidy
  • Torres Serra, Joel
  • Romero Morales, Enrique Edgar
  • De La Vaissiere, Remi
  • Talandier, Jean
Bentonite/sand brick mixtures installed at hygroscopic water content are currently considered for use in sealing systems for the deep and long-term disposal of radioactive wastes. The transport mechanisms of gas through bentonite/sand sealing materials at varying saturation levels represent a critical factor in the overall performance and integrity of the sealing system. Hence, several helium gas injection/dissipation tests were performed at constant total vertical stress or constant volume conditions at different dry densities and degrees of saturation of the mixture to understand the complex gas transport processes. The results provided the variation of the effective gas, The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Gas migration in low-permeability clay-based barriers

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
Gas migration in low-permeability materials has become a critical focus in energy and environmental geotechnics, particularly for managing the deep geological disposal of radioactive waste. Such waste can release radionuclides over hundreds of thousands of years, making it vital to understand the long-term processes occurring in repositories. Among these, significant gas volume generation, accumulation, and release are of great concern. While these processes vary depending on waste type and repository design, they must be addressed in all safety assessments. To this end, an experimental program was developed to investigate how excessive gas pressures induce damage in clay-rich geomaterials using materials from artificial (granular bentonite) and natural (argillaceous rock) barriers. Evidence suggests that gas preferentially flows through preferential pathways. Microstructural analyses conducted before and after gas injection provide insights into failure mechanisms, including the pore and fracture network geometric descriptors in intact and damaged materials. The self-sealing capacity of these materials was also evaluated using the same gas injection setup. A resaturation stage assesses water conductivity to quantify the potential loss of its hydraulic barrier function. These findings contribute to the safety case for repositories by improving our understanding of gas-induced damage and the resilience of engineered barriers., The authors acknowledge the financial support from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from the project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Digital image-based measurement of degree of saturation on moving soil

  • Morales Flauzin, Gerardo
  • Pinyol Puigmartí, Núria Mercè
  • Alvarado Bueno, Mauricio
  • Alonso Pérez de Agreda, Eduardo
This paper presents a novel methodology that combines Particle Image Velocimetry - Numerical Particles (PIV-NP) and Short-Wave Infrared Spectral Imaging for the non-invasive measurement of displacements and degree of saturation on moving soils. This allows for continuous monitoring and visualization of soil behavior and provides valuable insight into the deformation patterns and moisture evolution. The method was applied to a small-scale dam failure experiment. The methodology offers an integrated, comprehensive, and non-invasive approach to investigating soil physical models by simultaneously measuring displacements, strains, velocities, and degree of saturation in soils in motion., Project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparative study of gas testing protocols in clayey rocks for nuclear waste repositories

  • González Blanco, Laura
  • Llabjani, Qazim
  • Romero Morales, Enrique Edgar
  • Ferrari, Alessio
  • Laloui, Lyesse
  • Marschall, Paul
Understanding gas transport processes in clay barriers is crucial for assessing the long-term safety of geological repositories for radioactive waste. Fundamental and well-designed experimental research at the laboratory scale is an indispensable prerequisite for conceptualising gas transport mechanisms and their simulation at repository scales. In practice, however, it turns out that comparing gas invasion experiments on argillaceous rock samples is difficult since different laboratories use different test protocols. This paper presents a collaborative and comparative study conducted by two teams from the Geotechnical Laboratory at the Universitat Politècnica de Catalunya (UPC, Spain) and the Laboratory of Soil Mechanics at the Swiss Federal Institute of Technology of Lausanne (LMS/EPFL, Switzerland), carried out as part of the European Joint Programme EURAD. Both teams employed equivalent gas testing protocols to characterise two argillaceous host rocks: Boom Clay (Belgium) and Opalinus Clay (Switzerland). The integrated workflow enabled the determination of common features regarding the hydro-mechanical response of the tested samples. This research underscores the importance of verifiable testing methods to enhance the understanding of gas transport in geological repositories. The results highlight the benefits of coordinated efforts and shared methodologies in advancing geotechnical research and fostering collaboration among national agencies., It is acknowledged the funding received from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593 and from Nagra (Nationale Genossenschaft für die Lagerung radioaktiver Abfälle) under contracts No. 18713 and No. 18722. The first and third authors also acknowledge the financial support of the INTERMO2 project (PID2022141429OB-I00) funded by the Spanish Ministry of Science/Research Agency CIN/AEI/10.13039/501100011033/FEDER EU (2023-2027) and from ONDRAF/NIRAS under contract No. CCHO 2024-0374/00/00 (2024-2026)., Postprint (author's final draft)