Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Digital image-based measurement of degree of saturation on moving soil

  • Morales Flauzin, Gerardo
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Alvarado Bueno, Mauricio
  • Alonso Pérez de Agreda, Eduardo|||0000-0003-2472-3951
This paper presents a novel methodology that combines Particle Image Velocimetry - Numerical Particles (PIV-NP) and Short-Wave Infrared Spectral Imaging for the non-invasive measurement of displacements and degree of saturation on moving soils. This allows for continuous monitoring and visualization of soil behavior and provides valuable insight into the deformation patterns and moisture evolution. The method was applied to a small-scale dam failure experiment. The methodology offers an integrated, comprehensive, and non-invasive approach to investigating soil physical models by simultaneously measuring displacements, strains, velocities, and degree of saturation in soils in motion., Project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modelling offshore cable-soil interaction during pull-in operations with the material point method (MPM)

  • Maglia Espinàs, Mateu
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Hoffmann Jauge, Christian Amadeo
In a context of climate emergency decarbonization of energy is one of the main goals at the global level, and renewable energies are growing in share to substitute energy traditionally coming from hydrocarbons. The offshore environment has traditionally been used by oil and gas extraction industry, and now the accumulated knowledge in this field can be transferred to renewable energies such as offshore wind power plants. Both industries need to transport the energy onshore by pipelines or cables that are usually laid on soil surface relying only on soil bearing capacity to withstand installation and service loads. The assessment of soil reaction to embedment and lateral pipe movement is a key aspect to correctly install and dimension these structures. Material remolding and deformation in cable installation and service can play an important role in soil reaction as occurs in unburied pipe-soil interaction problems. For that reason, including large deformation analysis can have some benefits over classical bearing capacity solutions or standard finite element method (FEM) analysis. In this study, the material point method (MPM) implemented in the open-source code Anura3D, able to simulate large deformations and soil-water-structure interaction, is selected to study pipe/cable-soil interaction. The contact formulation, based on a velocity predictor-corrector scheme is addressed and improved. The numerical approach and its developments are validated against an instrumented centrifuge experiment in which a rigid pipe interacts with saturated sandy soil. The results compared with a current industry procedure known as the “wished-in-place” (WIP) method. This method is based on standard FEM analysis and cannot simulate large deformations or account for material remolding; instead, the deformed geometry is imposed directly. This work shows that MPM is a powerful tool to address problems where large deformation plays an important role., The first author acknowledges the support of Secretariat for Universities and Research of the Generalitat de Catalunya. through the Joan Oró grant (ref. BDNS 657443). The second author thanks the financial support received from the Serra Húnter Program put forward by the Department of Enterprise and Knowledge of the Secretariat for Universities and Research of the Generalitat de Catalunya. The authors acknowledge the financial support of the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER and Union Europea NextGenerationEU/PRTR. The authors also acknowledge the support of Anura3D MPM Research Community., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling wetting collapse, failure and deposition of an unsaturated slope with material point method

  • Carluccio, Gaia di|||0000-0001-7748-2317
  • Avilés Murcia, Luis Ángel|||0000-0002-9235-2374
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Alonso Pérez de Agreda, Eduardo|||0000-0003-2472-3951
The paper presents the modelling of unsaturated soils with the material point method (MPM), including the effect of wetting leading to the loss of strength and the volumetric collapse. The elastoplastic Clay and Sand Model (CASM) extended to unsaturated conditions, formulated in terms of Bishop's stress and suction, has been implemented in an MPM-based computational tool, in which gas density and pressure is assumed constant. The implementation of infiltration and seepage boundary conditions, required for wetting problems, are discussed and validated. A centrifuge experiment involving the construction, wetting, failure and post-failure of a slope is interpreted and reproduced by the MPM-based tool. Centrifuge data captured by video images, first analysed by particle image velocity (PIV) and then improved by the PIV-numerical particle (NP) procedure, provides the motion and deformation of the entire experiment and is compared with calculations. The measured response of a 1D column of the model slope during the first stages of the test provided a first approximation of the constitutive parameters. The finally adopted set of model parameters led to a proper simulation of the entire response of the slope during wetting pre- and post-failure stage., This study was supported by the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER and Union Europea NextGenerationEU/PRTR., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling wetting collapse, failure and deposition of an unsaturated slope with material point method

  • Carluccio, Gaia di
  • Avilés Murcia, Luis Ángel
  • Pinyol Puigmartí, Núria Mercè
  • Alonso Pérez de Agreda, Eduardo
The paper presents the modelling of unsaturated soils with the material point method (MPM), including the effect of wetting leading to the loss of strength and the volumetric collapse. The elastoplastic Clay and Sand Model (CASM) extended to unsaturated conditions, formulated in terms of Bishop's stress and suction, has been implemented in an MPM-based computational tool, in which gas density and pressure is assumed constant. The implementation of infiltration and seepage boundary conditions, required for wetting problems, are discussed and validated. A centrifuge experiment involving the construction, wetting, failure and post-failure of a slope is interpreted and reproduced by the MPM-based tool. Centrifuge data captured by video images, first analysed by particle image velocity (PIV) and then improved by the PIV-numerical particle (NP) procedure, provides the motion and deformation of the entire experiment and is compared with calculations. The measured response of a 1D column of the model slope during the first stages of the test provided a first approximation of the constitutive parameters. The finally adopted set of model parameters led to a proper simulation of the entire response of the slope during wetting pre- and post-failure stage., This study was supported by the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER and Union Europea NextGenerationEU/PRTR., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Digital image-based measurement of degree of saturation on moving soil

  • Morales Flauzin, Gerardo
  • Pinyol Puigmartí, Núria Mercè
  • Alvarado Bueno, Mauricio
  • Alonso Pérez de Agreda, Eduardo
This paper presents a novel methodology that combines Particle Image Velocimetry - Numerical Particles (PIV-NP) and Short-Wave Infrared Spectral Imaging for the non-invasive measurement of displacements and degree of saturation on moving soils. This allows for continuous monitoring and visualization of soil behavior and provides valuable insight into the deformation patterns and moisture evolution. The method was applied to a small-scale dam failure experiment. The methodology offers an integrated, comprehensive, and non-invasive approach to investigating soil physical models by simultaneously measuring displacements, strains, velocities, and degree of saturation in soils in motion., Project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE., Peer Reviewed, Postprint (author's final draft)