Pasar al contenido principal

EXPERIMENTAL AND NUMERICAL STUDY OF GEOLOGIC CARBON STORAGE ?

PCI2021-122077-2B

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprograma Subprograma Estatal de Internacionalización
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemo-hydro-mechanical effects of CO2 injection on reservoir and seal rocks: A review on laboratory experiments

  • Vafaie, Atefeh
  • Cama, Jordi
  • Soler, Josep M.
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
Geological carbon storage is one of the technologies required to arrive at the ambitious yet realistic net-zero emission target and climate change neutrality. Injected CO2 in geological formations acidifies the resident brine, inducing chemical reactions with the minerals. Reactions may alter the hydraulic and mechanical properties of the rock and have an impact on reservoir and wellbore integrity, reservoir injectivity, long-term compaction and caprock sealing capacity. We provide a comprehensive review of chemo-hydro-mechanical (CHM) effects of CO2 on the reservoir and sealing rocks, either intact or fractured, which have been studied through laboratory experiments under no-flow and open-flow conditions, i.e., batch and flow-through experiments. The hydraulic and mechanical rock properties affected by geochemical processes comprise (a) physical properties influencing the flow and transport of solutes (pore size distribution, porosity, permeability and fracture aperture and roughness), (b) multi-phase flow properties (capillary entry pressure and relative permeability), (c) mechanical characteristics, including stiffness (i.e., elastic moduli for intact rocks and normal stiffness for fractures), strength (cohesion, friction angle and fracture toughness), and poroelastic response (Biot's coefficient), and (d) time-dependent behavior of the rock (compaction creep). The experiments alone cannot capture the complex dynamics of CO2 flow underground, but they provide critical insights into short-term alteration mechanisms of rock with implications to geologic CO2 storage. Studying naturally altered rocks, extending the experiments to tens-of-meters-scale underground rock laboratories, and bringing together experimental observations and numerical simulations are valuable for the advance in the understanding of CHM processes and upscaling them across space and time., This work has received funding from European Joint Programme on Radioactive Waste Management, EJP-EURAD of the the European Union's Horizon 2020 Research and Innovation Programme 2014–2018 under agreement No. 847593, specifically from the WP MAGIC. I.R.K. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). I.R.K. also acknowledges support by the PCI2021-122077-2 B project (www.easygeocarbon.com) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. J.C. and J.M.S. also acknowledge funding from the Catalan Government through project 2017SGR1733. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S funded by MCIN/AEI/10.13039/501100011033). This research has been carried out within the framework of the activities of the Spanish Government through the “Maria de Maeztu Centre of Excellence” accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). Open access funding is provided by the Spanish National Research Council (CSIC). The authors acknowledge Dr. Nicolas Espinoza for providing source figures to prepare Fig. 9., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001198-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Global physics-based database of injection-induced seismicity

  • Kivi, Iman Rahimzadeh
  • Boyet, Auregan
  • Wu, Haiqing
  • Walter, Linus
  • Hanson-Hedgecock, Sara
  • Parisio, Francesco
  • Vilarrasa, Víctor
Fluid injection into geological formations for energy resource development frequently induces (micro)seismicity. Moderate- to large-magnitude induced earthquakes may cause injuries and/or economic loss, with the consequence of jeopardizing the operation and future development of these geo-energy projects. To achieve an improved understanding of the mechanisms of induced seismicity, develop forecasting tools and manage the associated risks, it is necessary to carefully examine seismic data from reported cases of induced seismicity and the parameters controlling them. However, these data are challenging to gather together and are time-consuming to collate as they come from different disciplines and sources. Here, we present a publicly available, multi-physical database of injection-induced seismicity (Kivi et al., 2022a; 10.20350/digitalCSIC/14813), sourced from an extensive review of published documents. Currently, it contains 158 datasets of induced seismicity caused by various subsurface energy-related applications worldwide. Each dataset covers a wide range of variables, delineating general site information, host rock properties, in situ geologic and tectonic conditions, fault characteristics, conducted field operations, and recorded seismic activities. We publish the database in flat-file formats (i.e., .xls and .csv tables) to facilitate its dissemination and utilization by geoscientists while keeping it directly readable by computer codes for convenient data manipulation. The multi-disciplinary content of this database adds unique value to databases focusing only on seismicity data. In particular, the collected data aim at facilitating the understanding of the spatiotemporal occurrence of induced earthquakes, the diagnosis of potential triggering mechanisms, and the development of scaling relations of maximum possible earthquake magnitudes and operational parameters. The database will boost research in seismic hazard forecasting and mitigation, paving the way for increasing contributions of geo-energy resources to meeting net-zero carbon emissions., The authors acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the starting grant GEoREST (http://www.georest.eu, last access: 23 July 2023) under grant agreement no. 801809. Iman R. Kivi and Victor Vilarrasa also acknowledge support by the PCI2021-122077-2B project (http://www.easygeocarbon.com, last access: 23 July 2023), funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Haiqing Wu acknowledges the financial support received from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia (AGAUR) and the European Social Fund (FI-2019). Haiqing Wu also acknowledges the Becas Santander Research Scholarship from the Technical University of Catalonia (UPC) and Santander. Francesco Parisio and Victor Vilarrasa acknowledge funding from the European Union's Horizon 2020 Research and Innovation Programme through the Marie Skłodowska-Curie Action ARMISTICE under grant agreement no. 882733. IDAEA-CSIC is a Centre of Excellence Servero Ochoa (Spanish Ministry of Science and Innovation, grant no. CEX2018-000794-S, funded by MCIN/AEI/10.13039/501100011033). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (grant no. CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001198-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the role of poroelastic stressing and pore pressure diffusion in discrete fracture and fault system in triggering post-injection seismicity in enhanced geothermal systems

  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
  • Kim, Kwang Il
  • Yoo, Hwajung
  • Min, Ki-Bok
© 2024 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., Injection-induced seismicity has become one of the most critical challenges for the widespread deployment of Enhanced Geothermal Systems (EGS). In particular, some EGS development projects have led to large, damaging earthquakes that unexpectedly occurred far off the stimulated reservoir region and, in particular, after stopping fluid injection. Yet, the causative mechanisms of these seismicity patterns remain highly elusive. Here, we identify a combination of mechanisms that could explain delayed seismicity in EGS sites by conducting fully-coupled hydromechanical simulations of the hydraulic stimulation of a naturally-fractured granitic reservoir. The model comprises a sparse network of long, variably-oriented fractures interacting with a nearby, critically-oriented fault. The results show that the presence of fractures introduces notable nonlinearities in the flow field and rock deformation and significantly expands the rock volume affected by fluid injection. First, the stimulated fracture network provides highly-permeable conduits for communicating elevated pore pressure over long distances. Second, the anisotropic expansion of fractures generates shear stress that is transmitted almost instantaneously across the reservoir. The pore pressure and stress perturbations can not only cause slip along fractures, inducing (micro)seismicity during injection, but also affect the stability of nearby faults, which may not necessarily be pressurized during injection. The transferred poroelastic stresses can increase or decrease the slip tendency along different fault segments. However, the fault may reactivate only after several months following injection when a progressive pore pressure diffusion modulated by the transient fault permeability evolution brings a critically-stressed fault segment to failure conditions. We also find that the spatiotemporal evolution of seismicity depends largely on the nearby fault orientation, hydromechanical properties, and hydraulic connection with the fracture network, as well as the initial state of stress. We conclude that accurate subsurface characterization and continuous monitoring during and after injection should allow for managing the risks posed by injection-induced seismicity and safely unlocking the immense potential for clean and sustainable geothermal energy., I.R.K. and V.V. acknowledge support by the PCI2021-122077-2B project (http://www.easygeocarbon.com) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.K. also acknowledges funding from the Engineering and Physical Sciences Research Council through the UKRI Postdoc Guarantee Award THMC4CCS [Grant number EP/X026019/1]. V.V. also acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (http://www.georest.eu) under Grant agreement No. 801809. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Grant CEX2018-000794-S funded by MCIN/AEI/10.13039/501100011033). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033). K.I.K. acknowledges support by the Innovative Technology Development Program for High-level waste management of the National Research Foundation of Korea (NRF) funded by the Korea government (Ministry of Science and ICT, MSIT) (Grant No.2021M2E3A2041312). K.-B.M. and H.Y. were supported by a grant from the Human Resources Development program (No. 20204010600250) of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), funded by the Ministry of Trade, Industry, and Energy of the Korean Government. K.-B.M. and H.Y. were also supported by the Innovative Technology Development Program for High-level waste management of the National Research Foundation of Korea (NRF) funded by the Korea government (Ministry of Science and ICT, MSIT) (Grant No. 2021M2E3A2044264)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Numerical models for the simulation of bleed-off control on post-injection seismicity in ‎enhanced geothermal systems

  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
[Description of methods used for collection/generation of data] The models are 2D plane strain including a homogeneous and isotropic granitic reservoir rock ‎intersected by an interconnected fracture network and a distant fault to the wellbore. Generic hydromechanical properties are assumed for the reservoir rock and the intersecting fractures and fault. The fault ‎in the models is either hydraulically isolated from the fracture network, i.e., our "basecase" scenario, or intersected by them, a scenario referred to as "connected". Post-‎injection protocols to control seismicity include well shut-in or bleed-off. During bleed-off, the ‎wellhead is opened to impose hydrostatic pressure conditions along the well over a period of ‎either 24 h or 1 h. The ‎hydrostatic pressure profile is maintained afterwards. Different injection ‎periods are considered to inspect the effect of this parameter on the effectiveness of bleed-off ‎in controlling post-injection seismicity. ‎, [Methods for processing the data] The Code_Bright executables "Cb_v9_3.exe" or "Cb_v9_1_3par4", i.e., the parallel version of the code running on 4 CPU cores, can be used to run the numerical models. Upon running the executables, the code generates several outputs, including "root.post.msh" and "root.post.res". These two outputs include the mesh structure and the simulation results, respectively. Any postprocessing software supporting the output file formats can be used to visualize the data., The Global physics-based database of injection-induced seismicity is licensed under Creative Commons CC BY 4.0 International License. Users are free to copy and redistribute the database material in any medium or format, and remix, transform, and build upon the material for any purpose, even commercially., This dataset comprises the input files for numerical simulation of stimulating an enhanced geothermal system and the associated risk of induced seismicity. Numerical models explore the hydromechanical mechanisms of post-injection induced seismicity and the potential impact of bleed-off to control seismicity. The models are 2D plane strain including a homogeneous and isotropic granitic reservoir rock intersected by an interconnected fracture network and a distant fault to the wellbore. The fault in our numerical models is either hydraulically isolated from the fracture network, i.e., our “basecase” scenario, or intersected by them, a scenario referred to as “connected”. Post-injection protocols to control seismicity include well shut-in or bleed-off. During bleed-off, the wellhead is opened to impose hydrostatic pressure conditions along the well over a period of either 24 h or 1 h. The ‎hydrostatic pressure profile is maintained afterwards. Different injection periods are considered to inspect the effect of this parameter on the effectiveness of bleed-off in controlling post-injection seismicity. Following this brief explanation, the dataset includes seven models provided in seven distinct folders: “Basecase_Inj250h_shutin”, basecase scenario of 250 h injection followed by well shut-in, “Basecase_Inj250h_bleedoff_1h”, basecase scenario of 250 h injection followed by well bleed-off over 1 h, “Basecase_Inj250h_bleedoff_24h”, basecase scenario of 250 h injection followed by well bleed-off over 24 h, “Connected_Inj84h_shutin”, connected scenario of 84 h injection followed by well shut-in, “Connected_Inj84h_bleedoff_1h”, connected scenario of 84 h injection followed by well bleed-off over 1 h, “Connected_Inj200h_shutin”, connected scenario of 200 h injection followed by well shut-in, “Connected_Inj200h_bleedoff_1h”, connected scenario of 200 h injection followed by well bleed-off over 1 h. In each folder, there is a file with the name of the folder ending as “_gen.dat” which contains the input data of the model, including material properties, initial and boundary conditions and the time intervals. There is also a file ending as “_gri.dat” that includes the information on the mesh. The file “root.dat” includes the name of the model. To run the simulation, execute the Code_Bright executables “Cb_v9_3.exe” or “Cb_v9_1_3par4”, i.e., the parallel version of the code running on 4 CPU cores, in each folder., - Project EASY GEO-CARBON ‎‎(www.easygeocarbon.com)‎ funded by MCIN/AEI‎ through grant number PCI2021-122077-2B‎. - The UKRI Postdoc Guarantee ‎Award THMC4CCS funded by the Engineering and Physical Sciences Research Council through grant number EP/X026019/1. - The ‎Starting Grant ‎‎GEoREST (www.georest.eu) funded by the European Research Council (ERC) under ‎the ‎‎European Union’s Horizon 2020 Research and ‎Innovation Program through under Grant ‎agreement No. 801809. ‎‎, This dataset comprises the input files for numerical simulation of stimulating an enhanced ‎geothermal system and the associated risk of induced seismicity. Numerical models explore the ‎hydromechanical mechanisms of post-injection induced seismicity and the potential impact of ‎bleed-off to control seismicity.‎ The dataset includes seven models provided in seven distinct folders: ‎ ‎"Basecase_Inj250h_shutin", basecase scenario of 250 h injection followed by well shut-in,‎ ‎"Basecase_Inj250h_bleedoff_1h", basecase scenario of 250 h injection followed by well bleed-‎off over 1 h,‎ ‎"Basecase_Inj250h_bleedoff_24h", basecase scenario of 250 h injection followed by well ‎bleed-off over 24 h, ‎ ‎"Connected_Inj84h_shutin", connected scenario of 84 h injection followed by well shut-in,‎ ‎"Connected_Inj84h_bleedoff_1h", connected scenario of 84 h injection followed by well bleed-‎off over 1 h,‎ ‎"Connected_Inj200h_shutin", connected scenario of 200 h injection followed by well shut-in,‎ ‎"Connected_Inj200h_bleedoff_1h", connected scenario of 200 h injection followed by well ‎bleed-off over 1 h.‎, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bleed-off control on post-injection seismicity in enhanced geothermal systems

  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
  • Kim, Kwang Il
  • Yoo, Hwajung
  • Min, Ki-Bok
Deep geothermal reservoirs could provide widespread access to clean and renewable energy around the world. However, hydraulic stimulation of these reservoirs to create sufficient injectivity and heat extraction has frequently induced earthquakes during and, in particular, after reservoir stimulation, which raises public concerns. This study aims to provide a possible explanation for post-injection seismicity and understand how it responds to well bleed-off as a common industrial practice to control such seismic activity. To this end, we perform coupled hydromechanical simulations of reservoir stimulation in a conceptual model comprising a deep granitic reservoir intersected by a network of long fractures and a nearby, critically-stressed fault. We find a combination of mechanisms triggering post-injection seismicity with time delays of several months after stopping injection: (1) poroelastic stressing that transmits normal and shear stress and causes undrained pressure buildup on the fault, (2) fracture-dominated pore pressure migration toward the fault, and (3) long-lasting along-the-fault pressure diffusion toward pre-stressed fault patches, promoted by dilation-induced fault permeability changes. In this setting, bleed-off causes rapid pressure decline in the near-wellbore region but marginal pressure changes farther away. The resulting attenuations of pore pressure and shear stress on the fault plane may not be enough to prevent fault reactivation. Bleed-off may counterintuitively accelerate fault slip by rapid relaxation of normal stress on the fault, which not only brings the stress state closer to failure conditions, but also accelerates pore pressure diffusion along the fault by slightly increasing its permeability. We show that bleed-off can effectively control post-injection seismicity only if rupture initiates from a structure in close proximity and with sufficient hydraulic connection to the wellbore. Future research should be directed toward the optimization of stimulation and post-stimulation design in light of the involved triggering mechanisms and through effective combination with subsurface characterization to control post-injection seismicity., I.R.K. and V.V. acknowledge support by the PCI2021-122077-2B project (www.easygeocarbon.com) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.K. also acknowledges funding from the Engineering and Physical Sciences Research Council through the UKRI Postdoc Guarantee Award THMC4CCS [Grant No. EP/X026019/1]. V.V. also acknowledges funding from the European Research Council under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809. IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033). K.I.K. acknowledges support by the Innovative Technology Development Program for High-level waste management of the National Research Foundation of Korea funded by the Korean government (Ministry of Science and ICT) (Grant No. 2021M2E3A2041312). K.-B.M. and H.Y. were supported by a grant from the Human Resources Development program (No. 20204010600250) of the Korea Institute of Energy Technology Evaluation and Planning, funded by the Ministry of Trade, Industry, and Energy of the Korean Government., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Hydraulic Rock Diffusivity Using Oscillatory Pore Pressure

  • Sciandra, Dario
  • Kivi, Iman Rahimzadeh
  • Makhnenko, Roman Y.
  • Rebscher, Dorothee
  • Vilarrasa, Víctor
The interest of exploring deep geological resources for energy-related activities is rapidly increasing. Lowering the risks associated with these activities requires the development of fast and accurate in situ rock characterization methods. Monitoring and interpreting periodic signals, whether natural or man-induced, can provide valuable information about subsurface formations. This study focuses on improving the understanding of injection-induced pore pressure oscillations in confined formations and describes the use of periodic signals for characterizing hydraulic diffusivity. We revisit existing analytical solutions of cyclic pore pressure diffusion into geologic formations with one-dimensional or axisymmetric geometries and compare their performance with numerical simulations, including uncoupled hydraulic (H) and coupled hydro-mechanical (HM) models. We investigate the solutions in three main applications: (a) energy storage in porous rock, (b) CO₂-rich water injection into a caprock representative for CO2 storage, and (c) stimulation of an enhanced geothermal system in crystalline rock. The wave propagation extends over kilometer scales for the first case. In the second case, the wave propagation is confined to tens of centimeters. For the last case, the wave propagation occurs on the order of tens of meters. Numerical and analytical solutions match under identical assumptions, with errors of less than 3% across all the considered cases. While numerical solutions account for multidimensional hydro-mechanical rock response, analytical solutions provide an immediate initial approximation of the problem, enabling rapid reactions. This study highlights how simplified tools can aid in real-time interpretation for diverse subsurface energy applications, bridging analytical and numerical approaches for practical subsurface monitoring and characterization., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. D.S., V.V., and I.R.K. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809. I.R.K. and V.V. also acknowledge support by the PCI2021-122077-2B project (www.easygeocarbon.com) funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.K. also acknowledges funding from the Engineering and Physical Sciences Research Council through the UKRI Postdoc Guarantee Award THMC4CCS [Grant number EP/X026019/1]. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science, Innovation and Universities, Project CEX2018-000794-S). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MICIU/AEI/https://doi.org/10.13039/501100011033). R.M. acknowledges the support from US National Science Foundation, grant CMMI-2239630., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)2, With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A 3D Darcy-scale reactive transport modeling of experimental wormhole formation in limestone under geological CO2 storage conditions

  • Vafaie, Atefeh
  • Soler, Josep M.
  • Cama, Jordi
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
Geologic CO2 storage is projected to play a key role in mitigating the climate change crisis. Changes in pore structure and hydraulic properties are likely to occur in carbonate rocks when they interact with CO2 as an acid-producing agent. The ability to understand and evaluate such alterations benefits an improved understanding of CO2 flow and storage behavior in the subsurface. Here, we combine laboratory experiments and numerical simulations of CO2-saturated water and HCl solution injections into limestone specimens to develop an improved understanding of reactive flow in these rocks. We employ a digital rock approach based on X-ray micro-computed tomography (µCT) to construct heterogeneous rock permeability maps, fed as inputs into 3D Darcy-scale reactive transport models of the experiments. The simulations satisfactorily reproduce measured changes in effluent chemistry, porosity, and permeability as well as the observed dissolution features in reacted rock samples. We show that the pore space heterogeneity controls chemical reactions from the very beginning of acid injections while the acid type becomes progressively important as the reaction front further penetrates the rock. The complete dissociation of HCl as a strong acid leads to a compact dissolution pattern, numerically captured using the classical Kozeny-Carman porosity-permeability relationship. In contrast, the partial dissociation of aqueous CO2 as a weak acid and the related pH-buffering effect drive a strong feedback between fluid flow and dissolution, leading to wormhole formation. This dissolution pattern can be only reproduced by a large exponent (15 to 27.6) in the porosity-permeability relationship. The obtained results highlight the primary control of small-scale heterogeneities and acid type on coupled flow and chemical reactions in permeable limestones and the need for a rigorous upscaling approach for field-scale studies., This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme 2014–2018 under agreement No. 847593, specifically from the WP MAGIC. J.C. and J.M.S. acknowledge funding from the Catalan Government through project 2021 SGR 00308. I.R.K. and V.V. acknowledge support by the PCI2021-122077-2B project (www.easygeocarbon.com) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.K. also received funding from the Engineering and Physical Sciences Research Council through the UKRI Postdoc Guarantee Award THMC4CCS [Grant number EP/X026019/1]. V.V. acknowledges funding from the Spanish Ministry of Science, Innovation and Universities through the project HydroPoreII (PID2022-137652NB-C44). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S funded by MCIU/AEI/10.13039/501100011033). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MICIU/AEI/1013039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A MATLAB approach for developing digital rock models of heterogeneous limestones for reactive transport modeling

  • Vafaie, Atefeh|||0000-0003-0104-5377
  • Cama, Jordi|||0000-0002-8949-3088
  • Kivi, Iman R.|||0000-0002-7150-0411
  • Vilarrasa, Victor|||0000-0003-1169-4469
  • Soler, Josep M.|||0000-0003-0741-249X
Porosity is a key parameter controlling the physico-chemical behavior of porous rocks. Digital rock physics offers a unique technique for imaging the inherently heterogeneous rock microstructure at fine spatial resolutions and its computational reconstruction, through which a better understanding and prediction of the rock behavior can be achieved. In this study, we propose a simple but accurate method to build a 3D porosity map of centimeter-scale carbonate rock cores from X-ray Micro Computed Tomography (XMCT) imaging data. The method consists of 3 main steps: i) decomposition of 3D volumetric XMCT data into sub-volumes, ii) processing of equidistributed 2D cross-section images in each sub-volume and iii) 2D slice-by-slice calculation of porosity and its assembly to reconstruct a 3D continuum porosity map over the whole core domain using a MATLAB code. The proposed approach significantly conserves the required memory to manipulate large image datasets. The digitized porosity representations are used to build 3D permeability maps of the cores by applying an explicit permeability-porosity relationship. The permeability maps are used as input for numerical simulation of the rock response to the percolation of reactive fluids through which the general validity of the approach is verified. The developed digital rock model paves the way for an improved understanding of reactive transport in carbonate rocks.