Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering vacancies in Bi2S3 yielding sub-bandgap photoresponse and highly sensitive short-wave infrared photodetectors

  • Huo, Nengjie
  • Figueroba, Alberto
  • Yang, Yujue
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Magén, César
  • Konstantatos, Gerasimos
Defects play an important role in tailoring the optoelectronic properties of materials. Here we demonstrate that sulphur vacancies are able to engineer sub-band photoresponse into the short-wave infrared range due to formation of in-gap states in Bi2S3 single crystals supported by density functional (DF) calculations. Sulfurization and subsequent refill of the vacancies results in faster response but limits the spectral range to the near infrared as determined by the bandgap of Bi2S3. A facile chemical treatment is then explored to accelerate the speed of sulphur deficient (SD)-based detectors on the order of 10 ms without sacrificing its spectral coverage into the infrared, while holding a high D* close to 10^15 Jones in the visible-near infrared range and 10^12 Jones at 1.6 um. This work also provides new insights into the role sulphur vacancies play on the electronic structure and, as a result, into sub-bandgap photoresponse enabling ultrasensitive, fast and broadband photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). Y.Y. acknowledges support from the National Natural Science Foundation of China under grant no. 61805045. S.C. acknowledges support from Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600). Furthermore, the research leading to these results has received funding from the European Union H2020 Programme under grant agreement no. 785219 Graphene Flagship, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Single-exciton gain and stimulated emission across the infrared telecom band from robust heavily doped PbS colloidal quantum dots

  • Christodoulou, Sotirios
  • Ramiro, Iñigo
  • Othonos, Andreas
  • Özdemir, Onur
  • Dalmases Solé, Mariona|||0000-0002-4151-6586
  • Özdemir, Onur
  • Pradhan, Santanu
  • Itskos, Grigorios
  • Konstantatos, Gerasimos
Materials with optical gain in the infrared are of paramount importance for optical communications, medical diagnostics, and silicon photonics. The current technology is based either on costly III-V semiconductors that are not monolithic to silicon CMOS technology or Er-doped fiber technology that does not make use of the full fiber transparency window. Colloidal quantum dots (CQDs) offer a unique opportunity as an optical gain medium in view of their tunable bandgap, solution processability, and CMOS compatibility. The 8-fold degeneracy of infrared CQDs based on Pb-chalcogenides has hindered the demonstration of low-threshold optical gain and lasing, at room temperature. We demonstrate room-temperature, infrared, size-tunable, band-edge stimulated emission with a line width of ~14 meV. Leveraging robust electronic doping and charge-exciton interactions in PbS CQD thin films, we reach a gain threshold at the single exciton regime representing a 4-fold reduction from the theoretical limit of an 8-fold degenerate system, with a net modal gain in excess of 100 cm-1., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER) through grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA, and from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledges support from a Marie Curie Standard European Fellowship (NAROBAND, H2020-MSCA-IF-2016-750600). I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. We are also thankful to Dr. Kaifen Wu for fruitful discussions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Near-Unity Photoluminescence Quantum Yield in CsPbBr3 Nanocrystal Solid-State Films via Postsynthesis Treatment with Lead Bromide

  • Stasio, Francesco Di
  • Christodoulou, Sotirios
  • Huo, Nengjie
  • Konstantatos, Gerasimos
Metal halide perovskite nanocrystals (NCs) possess high photoluminescence (PL) quantum yield (PL) and color tunability. Yet, until now, it has been difficult to maintain the high PL observed in solution in spin-coated films. Here, we report a novel CsPbBr3 NCs room-temperature synthesis based on Cs acetate, which displays near-unity PL in solid-state films upon post-synthetic treatment with lead bromide. The as-synthesized NCs show a PL of 80% in spincoated films but the post-synthesis treatment further enhances the efficiency >95%. The high PL is further confirmed by the monomolecular decay of the PL (5.8 ns) indicating a nearly complete suppression of non-radiative channels. The obtained films demonstrate high stability in air and require around 3 weeks to decrease to half the initial PL value., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low-temperature colloidal synthesis of CuBiS2 nanocrystals for optoelectronic devices, Low-temperature Colloidal Synthesis of CuBiS2 Nanocrystals for Optoelectronic Devices

  • Wang, Jian-Jun
  • Akgul, Zafer
  • Bi, Yu
  • Christodoulou, Sotirios
  • Konstantatos, Gerasimos
A new facile colloidal synthesis of CuBiS2 (CBS) nanocrystals with monodispersed size and good quality has been developed. The CBS nanocrystal films was deposited by solid-state ligand exchange and their field effect transistor and photoconductive characteristics were characterized. The prototype solar cell has presented a decent performance. The suitable bandgap and highly appealing photoresponsivity demonstrate the as-synthesized CBS nanocrystals as an alternative to existing Cd- and Pb-containing nanocrystals for optoelectronic and photovoltaic devices., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mid- and long-wave infrared optoelectronics via intraband transitions in PbS Colloidal Quantum Dots

  • Özdemir, Onur
  • Konstantatos, Gerasimos
  • Ramiro, Iñigo
  • Christodoulou, Sotirios
  • Gupta, Shuchi
  • Dalmases, Mariona
  • Torre, Iacopo|||0000-0001-6515-181X
Optical sensing in the mid- and long-wave infrared (MWIR, LWIR) is of paramount importance for a large spectrum of applications including environmental monitoring, gas sensing, hazard detection, food and product manufacturing inspection, and so forth. Yet, such applications to date are served by costly and complex epitaxially grown HgCdTe quantum-well and quantum-dot infrared photodetectors. The possibility of exploiting low-energy intraband transitions make colloidal quantum dots (CQD) an attractive low-cost alternative to expensive low bandgap materials for infrared applications. Unfortunately, fabrication of quantum dots exhibiting intraband absorption is technologically constrained by the requirement of controlled heavy doping, which has limited, so far, MWIR and LWIR CQD detectors to mercury-based materials. Here, we demonstrate intraband absorption and photodetection in heavily doped PbS colloidal quantum dots in the 5-9 µm range, beyond the PbS bulk band gap, with responsivities on the order of 10-4 A/W at 80 K. We have further developed a model based on quantum transport equations to understand the impact of electron population of the conduction band in the performance of intraband photodetectors and offer guidelines toward further performance improvement., I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through Grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledge support from a Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High Open Circuit Voltage Solar Cells based on bright mixed-halide CsPbBrI2 Perovskite Nanocrystals Synthesized in Ambient Air Conditions

  • Christodoulou, Sotirios
  • Stasio, Francesco Di
  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in the wavelength range 350-660 nm were fabricated in air with two different deposition methods. The solar cells display a photo-conversion efficiency of 5.3% and open circuit voltage (Voc) up to 1.31V, among the highest reported for perovskite based solar cells with band gap below 2eV, clearly demonstrating the potential of this material., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-Efficiency Light-Emitting Diodes Based on Formamidinium Lead Bromide Nanocrystals and solution processed transport layers

  • Stasio, Francesco Di
  • Ramiro, Íñigo
  • Bi, Yu
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and bright-ness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrication. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evaporation in ultra-high-vacuum., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Near-Unity Photoluminescence Quantum Yield in CsPbBr3 Nanocrystal Solid-State Films via Postsynthesis Treatment with Lead Bromide

  • Stasio, Francesco Di
  • Christodoulou, Sotirios
  • Huo, Nengjie
  • Konstantatos, Gerasimos
Metal halide perovskite nanocrystals (NCs) possess high photoluminescence (PL) quantum yield (PL) and color tunability. Yet, until now, it has been difficult to maintain the high PL observed in solution in spin-coated films. Here, we report a novel CsPbBr3 NCs room-temperature synthesis based on Cs acetate, which displays near-unity PL in solid-state films upon post-synthetic treatment with lead bromide. The as-synthesized NCs show a PL of 80% in spincoated films but the post-synthesis treatment further enhances the efficiency >95%. The high PL is further confirmed by the monomolecular decay of the PL (5.8 ns) indicating a nearly complete suppression of non-radiative channels. The obtained films demonstrate high stability in air and require around 3 weeks to decrease to half the initial PL value., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mid- and long-wave infrared optoelectronics via intraband transitions in PbS Colloidal Quantum Dots

  • Özdemir, Onur
  • Konstantatos, Gerasimos
  • Ramiro, Iñigo
  • Christodoulou, Sotirios
  • Gupta, Shuchi
  • Dalmases, Mariona
  • Torre, Iacopo
Optical sensing in the mid- and long-wave infrared (MWIR, LWIR) is of paramount importance for a large spectrum of applications including environmental monitoring, gas sensing, hazard detection, food and product manufacturing inspection, and so forth. Yet, such applications to date are served by costly and complex epitaxially grown HgCdTe quantum-well and quantum-dot infrared photodetectors. The possibility of exploiting low-energy intraband transitions make colloidal quantum dots (CQD) an attractive low-cost alternative to expensive low bandgap materials for infrared applications. Unfortunately, fabrication of quantum dots exhibiting intraband absorption is technologically constrained by the requirement of controlled heavy doping, which has limited, so far, MWIR and LWIR CQD detectors to mercury-based materials. Here, we demonstrate intraband absorption and photodetection in heavily doped PbS colloidal quantum dots in the 5-9 µm range, beyond the PbS bulk band gap, with responsivities on the order of 10-4 A/W at 80 K. We have further developed a model based on quantum transport equations to understand the impact of electron population of the conduction band in the performance of intraband photodetectors and offer guidelines toward further performance improvement., I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through Grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledge support from a Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-Efficiency Light-Emitting Diodes Based on Formamidinium Lead Bromide Nanocrystals and solution processed transport layers

  • Stasio, Francesco Di
  • Ramiro, Íñigo
  • Bi, Yu
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and bright-ness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrication. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evaporation in ultra-high-vacuum., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High Open Circuit Voltage Solar Cells based on bright mixed-halide CsPbBrI2 Perovskite Nanocrystals Synthesized in Ambient Air Conditions

  • Christodoulou, Sotirios
  • Stasio, Francesco Di
  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in the wavelength range 350-660 nm were fabricated in air with two different deposition methods. The solar cells display a photo-conversion efficiency of 5.3% and open circuit voltage (Voc) up to 1.31V, among the highest reported for perovskite based solar cells with band gap below 2eV, clearly demonstrating the potential of this material., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Single-exciton gain and stimulated emission across the infrared telecom band from robust heavily doped PbS colloidal quantum dots

  • Christodoulou, Sotirios
  • Ramiro, Iñigo
  • Othonos, Andreas
  • Özdemir, Onur
  • Dalmases Solé, Mariona
  • Özdemir, Onur
  • Pradhan, Santanu
  • Itskos, Grigorios
  • Konstantatos, Gerasimos
Materials with optical gain in the infrared are of paramount importance for optical communications, medical diagnostics, and silicon photonics. The current technology is based either on costly III-V semiconductors that are not monolithic to silicon CMOS technology or Er-doped fiber technology that does not make use of the full fiber transparency window. Colloidal quantum dots (CQDs) offer a unique opportunity as an optical gain medium in view of their tunable bandgap, solution processability, and CMOS compatibility. The 8-fold degeneracy of infrared CQDs based on Pb-chalcogenides has hindered the demonstration of low-threshold optical gain and lasing, at room temperature. We demonstrate room-temperature, infrared, size-tunable, band-edge stimulated emission with a line width of ~14 meV. Leveraging robust electronic doping and charge-exciton interactions in PbS CQD thin films, we reach a gain threshold at the single exciton regime representing a 4-fold reduction from the theoretical limit of an 8-fold degenerate system, with a net modal gain in excess of 100 cm-1., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER) through grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA, and from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledges support from a Marie Curie Standard European Fellowship (NAROBAND, H2020-MSCA-IF-2016-750600). I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. We are also thankful to Dr. Kaifen Wu for fruitful discussions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low-temperature colloidal synthesis of CuBiS2 nanocrystals for optoelectronic devices, Low-temperature Colloidal Synthesis of CuBiS2 Nanocrystals for Optoelectronic Devices

  • Wang, Jian-Jun
  • Akgul, Zafer
  • Bi, Yu
  • Christodoulou, Sotirios
  • Konstantatos, Gerasimos
A new facile colloidal synthesis of CuBiS2 (CBS) nanocrystals with monodispersed size and good quality has been developed. The CBS nanocrystal films was deposited by solid-state ligand exchange and their field effect transistor and photoconductive characteristics were characterized. The prototype solar cell has presented a decent performance. The suitable bandgap and highly appealing photoresponsivity demonstrate the as-synthesized CBS nanocrystals as an alternative to existing Cd- and Pb-containing nanocrystals for optoelectronic and photovoltaic devices., Peer Reviewed, Postprint (author's final draft)