Pasar al contenido principal

FOTODETECTORES INFRARROJOS BASADOS EN PUNTOS QUANTICOS Y MATERIALES 2D DE BAJO COSTE Y ALTO RENDIMIENTO

TEC2017-88655-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario INSTITUTO DE CIENCIAS FOTONICAS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering vacancies in Bi2S3 yielding sub-bandgap photoresponse and highly sensitive short-wave infrared photodetectors

  • Huo, Nengjie
  • Figueroba, Alberto
  • Yang, Yujue
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Magén, César
  • Konstantatos, Gerasimos
Defects play an important role in tailoring the optoelectronic properties of materials. Here we demonstrate that sulphur vacancies are able to engineer sub-band photoresponse into the short-wave infrared range due to formation of in-gap states in Bi2S3 single crystals supported by density functional (DF) calculations. Sulfurization and subsequent refill of the vacancies results in faster response but limits the spectral range to the near infrared as determined by the bandgap of Bi2S3. A facile chemical treatment is then explored to accelerate the speed of sulphur deficient (SD)-based detectors on the order of 10 ms without sacrificing its spectral coverage into the infrared, while holding a high D* close to 10^15 Jones in the visible-near infrared range and 10^12 Jones at 1.6 um. This work also provides new insights into the role sulphur vacancies play on the electronic structure and, as a result, into sub-bandgap photoresponse enabling ultrasensitive, fast and broadband photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). Y.Y. acknowledges support from the National Natural Science Foundation of China under grant no. 61805045. S.C. acknowledges support from Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600). Furthermore, the research leading to these results has received funding from the European Union H2020 Programme under grant agreement no. 785219 Graphene Flagship, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Colloidal AgBiS2 nanocrystals with reduced recombination yield 6.4% power conversion efficiency in solution-processed solar cells

  • Burgués-Ceballos, Ignasi
  • Wang, Yongjie
  • Akgul, M. Zafer
  • Konstantatos, Gerasimos
AgBiS2 nanocrystals have recently emerged as a RoHS compliant material for photovoltaics. This heavy-metal-free ternary chalcogenide can be prepared from earth-abundant precursors, is solution-processable and presents a high absorption coefficient as well as a suitable bandgap for solar cell applications. However, the full potential of AgBiS2 nanocrystals is yet to be realised; the highest efficiencies reported so far used very thin (~35 nm) absorbing layers due to the limited carrier transport and trap-assisted recombination that hinder the performance of thicker layers. In this work we implement a synthetic route to obtain larger size colloidal AgBiS2 nanocrystals, which in turn allows to fabricate thin film solar cells with higher mobility and reduced trap-assisted recombination, resulting in a power conversion efficiency of 6.4%, due to a photocurrent increase of 4 mA/cm2 compared to prior reports. We conclude by discussing on the main current challenges underpinning the photovoltaic performance of this material as well as strategies to further reduce the voltage and photocurrent losses., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ag2ZnSnS4–ZnS core–shell colloidal quantum dots: a near-infrared luminescent material based on environmentally friendly elements

  • Saha, Avijit
  • Konstantatos, Gerasimos
Low cost, multinary colloidal quantum dots (QDs) based on environmentally friendly elements, with bright, narrow-width, tunable near-infrared (NIR) luminescence are promising alternatives to Cd and Pb chalcogenide QDs for in vivo bio-imaging, LED and sensing applications. Herein, we demonstrate Pb/Cd free solution-processed colloidal luminescent Ag2ZnSnS4–ZnS (AZTS–ZnS) core–shell QDs with precise control over the ZnS shell thickness and thereby its optical properties. Unlike indium based multinary (I–III–VI group) core–shell QDs these nanocrystals show a narrow photoluminescence (PL) full width at half maximum (fwhm) of 105–110 meV in the first NIR window. By monitoring the starting AZTS core size, we achieve tunable emission over a small NIR window in these QDs with the best PL quantum yield (PLQY) of 17.4%., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ag2ZnSnS4–ZnS core–shell colloidal quantum dots: a near-infrared luminescent material based on environmentally friendly elements

  • Saha, Avijit
  • Konstantatos, Gerasimos
Low cost, multinary colloidal quantum dots (QDs) based on environmentally friendly elements, with bright, narrow-width, tunable near-infrared (NIR) luminescence are promising alternatives to Cd and Pb chalcogenide QDs for in vivo bio-imaging, LED and sensing applications. Herein, we demonstrate Pb/Cd free solution-processed colloidal luminescent Ag2ZnSnS4–ZnS (AZTS–ZnS) core–shell QDs with precise control over the ZnS shell thickness and thereby its optical properties. Unlike indium based multinary (I–III–VI group) core–shell QDs these nanocrystals show a narrow photoluminescence (PL) full width at half maximum (fwhm) of 105–110 meV in the first NIR window. By monitoring the starting AZTS core size, we achieve tunable emission over a small NIR window in these QDs with the best PL quantum yield (PLQY) of 17.4%., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Colloidal AgBiS2 nanocrystals with reduced recombination yield 6.4% power conversion efficiency in solution-processed solar cells

  • Burgués-Ceballos, Ignasi
  • Wang, Yongjie
  • Akgul, M. Zafer
  • Konstantatos, Gerasimos
AgBiS2 nanocrystals have recently emerged as a RoHS compliant material for photovoltaics. This heavy-metal-free ternary chalcogenide can be prepared from earth-abundant precursors, is solution-processable and presents a high absorption coefficient as well as a suitable bandgap for solar cell applications. However, the full potential of AgBiS2 nanocrystals is yet to be realised; the highest efficiencies reported so far used very thin (~35 nm) absorbing layers due to the limited carrier transport and trap-assisted recombination that hinder the performance of thicker layers. In this work we implement a synthetic route to obtain larger size colloidal AgBiS2 nanocrystals, which in turn allows to fabricate thin film solar cells with higher mobility and reduced trap-assisted recombination, resulting in a power conversion efficiency of 6.4%, due to a photocurrent increase of 4 mA/cm2 compared to prior reports. We conclude by discussing on the main current challenges underpinning the photovoltaic performance of this material as well as strategies to further reduce the voltage and photocurrent losses., Peer Reviewed, Postprint (published version)