Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Artículo científico (JournalArticle)

A patchy particle model for C-S-H formation

  • Prabhu, Achutha
  • Dolado, Jorge S.
  • Koenders, Eddie A.B.
  • Zarzuela, Rafael
  • Mosquera, María J.
  • Garcia-Lodeiro, Ines
  • Blanco-Varela, María Teresa
The composition and structure of Calcium-Silicate-Hydrate (C-S-H) phases depends on various reaction parameters leading to its formation. Molecular Dynamic simulation studies probing the formation and structure of C-S-H are generally computationally expensive and can reach only very short time scales. Herein, we propose a coarse graining approach to model the formation of C-S-H, using patchy particles and a modified Patchy Brownian Cluster Dynamics algorithm. The simulations show that patchy particle systems can recover the qualitative kinetic evolution of C-S-H formation, and the obtained final structures were comparable to previously reported molecular dynamics studies and experiments. The model was extended to study the effect of water in the polymerization of tetraethoxysilane oligomers, the principal component of an impregnation treatment for deteriorated concrete surfaces. The intermediate system properties predicted by the simulations, such as viscosity and gel time, and structure were found to be well in accordance with the tailored experiments.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

A patchy particle model for C-S-H formation

  • Prabhu, Achutha
  • Sánchez Dolado, Jorge
  • Koenders, Eddie A.B.
  • Zarzuela, Rafael
  • Mosquera, María J.
  • Garcia-Lodeiro, Ines
  • Blanco-Varela, María Teresa
The composition and structure of Calcium-Silicate-Hydrate (C-S-H) phases depends on various reaction parameters leading to its formation. Molecular Dynamic simulation studies probing the formation and structure of C-S H are generally computationally expensive and can reach only very short time scales. Herein, we propose a coarse graining approach to model the formation of C-S-H, using patchy particles and a modified Patchy Brownian Cluster Dynamics algorithm. The simulations show that patchy particle systems can recover the qualitative kinetic evolution of C-S-H formation, and the obtained final structures were comparable to previously reported molecular dynamics studies and experiments. The model was extended to study the effect of water in the polymerization of tetraethoxysilane oligomers, the principal component of an impregnation treatment for deteriorated concrete surfaces. The intermediate system properties predicted by the simulations, such as viscosity and gel time, and structure were found to be well in accordance with the tailored experiments., The work described in this manuscript has been performed under InnovaConcrete EC project, supported by funding from the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No 760858. AP and JSD also acknowledge the support received from the BASKRETE initiative and the Joint Transborder Laboratory (LTC) "Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials".
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Effect of alkoxysilane on early age hydration in portland cement pastes

  • Husillos-Rodríguez, N.
  • Martínez-Ramírez, S.
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Blanco-Varela, María Teresa
  • Garcia-Lodeiro, Inés
Silanes added during mortar or concrete preparation, may modify the fresh state properties, hydration kinetics and mechanical strength of the final product. The effects of silanes on cement hydration have been widely studied in the literature, however, there is some controversy about its effect at short ages. The present study was undertaken to determine the effect of a TEOS-based alkoxysilane (UCA-T), produced by ultrasound-assisted pre-hydrolysis of an oligomeric precursor, on early age cement paste hydration. The nature of the processes modifying the various stages of cement hydration kinetics in the presence of the alkoxysilane was ascertained by analysing paste composition at several ages (defined on the grounds of calorimetric curve results) using XRD, TG-DTG, FTIR and Raman spectroscopy. The calorimetric curve of pastes containing UCA-T exhibited a new early age, pre-induction period exothermal peak, indicative of UCA-T hydrolysis, C(3)A and C3S dissolution and ettringite and C-S-H gel precipitation. Portlandite, however, did not precipitate but reacts with the Si(OH)(4) sourced from UCA-T hydrolysis to generate further C-S-H gel. The induction period following on that new exothermal peak was considerably longer than the period observed in the reference cement, an effect that intensified at higher UCA-T content.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Tesis doctoral (DoctoralThesis)

Nuevos materiales de construcción ecosostenibles por su acción superhidrofugante

  • Martínez Carrascosa, Luis Antonio
La protección de materiales de construcción frente a la acción del agua, el principal vehículo de los agentes de degradación, es un factor clave para aumentar la vida útil de los edificios. En la actualidad existen materiales de construcción superhidrofugantes, los cuales poseen una elevada hidrofobicidad (como consecuencia de su una baja energía superficial) que evita la penetración de agua, y una alta repelencia (debido a una rugosidad característica de un estado Cassie-Baxter) que dota a los materiales de propiedades auto-limpiantes. Sin embargo, los materiales superhidrofugantes presentan dos inconvenientes principales: (1) su baja durabilidad, y (2) su escasa resistencia a contaminantes de naturaleza oleosa. En la presente Tesis Doctoral, se plantean soluciones a estos inconvenientes mediante el desarrollo productos, obtenidos por ruta sol-gel, que dotan a los materiales de construcción de propiedades innovadoras respecto a la durabilidad y la resistencia a contaminantes. Para ello, se han seguido dos líneas de investigación: 1. Materiales de construcción superhidrofugantes de elevada durabilidad. Se plantean dos estrategias. La primera de ellas ha sido desarrollar un producto superhidrofugante que contiene nanopartículas hidrófobas, unidas por un oligómero de sílice, lo que le confiere una elevada adhesión al sustrato. En la segunda aproximación, la superhidrofobicidad es obtenida mediante la aplicación de un producto hidrofugante y la posterior ablación láser de la superficie 2. Materiales de construcción con resistencia a contaminantes de naturaleza oleosa. En una primera aproximación se ha diseñado un producto que contiene nanopartículas de sílice y un fluoroalquilsilano, el cual dota a los materiales de propiedades oleofugantes. La siguiente estrategia consiste en producir materiales de construcción que presenten superoleofobicidad bajo agua, como consecuencia de la superhidrofilia foto-inducida en su superficie, mientras el interior del material mantiene su hidrofobicidad. Para ello se emplea un producto que contiene nanopartículas de TiO2 integradas en un gel de sílice modificado orgánicamente., Texto de los capítulos 1, 2, 7 y 8 en español.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Producing C-S-H gel by reaction between silica oligomers and portlandite: A promising approach to repair cementitious materials

  • Zarzuela Sánchez, Rafael
  • Luna Aguilera, Manuel Jesús
  • Martínez Carrascosa, Luis Antonio
  • Yeste Siguenza, María del Pilar
  • Garcia-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Cauqui López, Miguel Ángel
  • Rodríguez-Izquierdo Gil, José María
  • Mosquera Díaz, María Jesús
Impregnation treatments are one of the alternatives to protect concrete-based building and monuments from weathering degradation. However, it is important to consider the chemical compatibility of the reaction products with the building material. The impregnation product studied here consists of a silica oligomer able to poly- merize, by a simple sol-gel process, inside the pore structure of concrete. In this work, we investigate the ability of this impregnation treatment to produce C-S-H gel in contact with cement paste. A complete characterization of the reaction products demonstrated that the silanol groups from silica oligomers react with the portlandite present in the cement paste generating a material with the chemical, structural and morphological features of C- S-H gel. Simultaneously, the 29Si NMR results indicate that the SieO units are incorporated into the existing C-S- H, increasing its chain length. These results open the way for a simple concrete structures repairing procedure. 1.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Studying the bulk hydrophobization of cement mortars by the combination of alkylalkoxysilane admixture and fluoropolymer-functionalized aggregate

  • Zarzuela Sánchez, Rafael
  • González-Coneo, Jorge
  • Luna Aguilera, Manuel Jesús
  • Díaz, Ana
  • Mosquera Díaz, María Jesús
In this work, hydrophobic mortars are produced by combining a silane-based admixture with the pre-treatment of the aggregates with an alkoxysilane-ended fluoropolymer. A comparative study is presented to determine the effect of the components, under different curing conditions, on the hydrophobicity, mechanical performance, composition and micro-structure. The combination of both strategies allows obtaining hydrophobic properties at different curing conditions, whereas the silane loses effectiveness at high humidity and the modified aggregate at low humidity. The silane hinders cement hydration and promotes gaps in the aggregate-matrix interfacial transition zone, decreasing mechanical resistance, whereas the modified aggregate changes the interfacial transition zone morphology without significant effects on resistance. The combination of both strategies partially compensates the negative impact of the silane admixture, especially when the mortars are cured at high humidity. Thus, this combination increases versatility of the mortars and poses as a potential route to address the limitations of silane admixtures. © 2022 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Social appreciation for the improvement of tourism management of 20th-century heritage: a methodological proposal

  • Ramírez Guerrero, Gema
  • García Onetti, Javier
  • Chica Ruíz, Juan Adolfo
  • Arcila Garrido, Manuel
Abstract Purpose This paper attempts to fill the gap that exists in research regarding 20th-century heritage and its social appreciation. The purpose of this paper is to explore different ways of evaluating the heritage value and tourism potential and to propose an innovative model validated in the Zarzuela Hippodrome as an example of cultural asset from 20th century with important economic, social, cultural, aesthetic and architectural aspects. Design/methodology/approach This study opted for an interpretation of heritage from an ecosystem, integrating and global paradigm, understanding the asset as a set of resources that interact with each other, generating a common and enriched tourist experience among all the elements that make it up. From this perspective, it is conceived that by modifying one of the elements, the whole (tourist) ecosystem will be equally influenced. On the other side, it was incorporated non-parametric techniques based on the implementation of surveys for the validation of the tool to the case study of the Zarzuela hippodrome. Findings The results suggest that the hippodrome's internal values have been evaluated very positively, while its external values are low. Through this study, the paper has identified several weaknesses that impede its functioning as a viable “tourist product.” The distance from the city center, the lack of available information and the scarce diffusion and tourism promotion are its main weaknesses. The proposed analysis tool reveals the importance of the active participation of visitors to evaluate cultural assets through the combination of aspects related to the conservation of cultural assets and, in turn, elements that encourage their commodification as tourist products, break down barriers between these two disciplines. Research limitations/implications The management tool proposed in this study can be used to underpin the creation of tourism experiences in cultural or heritage assets by diagnosing the current state of its tourist potential, quantifying its value in relation to the visitors’ perception and making visible those problematic aspects to develop actions to solve them. Although the present study is support for future research, as well as for improving the marketing of heritage in tourist settings, an in-depth analysis of the technical elements of heritage, as well as of its intervention (if applicable), will be necessary for the managers who want to use the tool. Social implications One of the most differentiating characteristics between the construction typology of 20th-century historical buildings is perhaps the scarcity of decorative ornamentation, with exposed concrete being the main surface coating. Many of these constructions have an important cultural and historical relevance, however, the social perception, as regards its consideration as architectural and artistic heritage seems to reflect discordant aspects. This study provides support as a decision-making tool to determine the existing valuation of a building and how to enhance it. Originality/value This study takes steps toward the creation of a model that supports decision-makers and owners of cultural assets through a measurement system that makes it possible to quantify and determine the current state of tourism use through the social evaluation of heritage criteria. It defines which are the elements that favor the resilience of the property or, on the contrary, which are those that undermine its enhancement.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A combined data-driven, experimental and modelling approach for assessing the optimal composition of impregnation products for cementitious materials

  • Perko, Janez
  • Laloy, Eric
  • Zarzuela Sánchez, Rafael
  • Couckuyt, Ivo
  • Garcia-Navarro, R.
  • Mosquera Díaz, María Jesús
The effectiveness of sol-gel based treatments for the protection of concrete depends on their capacity to penetrate into the material pores. Optimization of sol formulation to achieve maximum penetration depth is not a straightforward process, as the influence of different physical properties of the sol varies with the pore size distribution of each concrete. Thus, a comprehensive experimental programme to evaluate this large number of materials would require a significant number of experiments. This manuscript describes an approach, using combined computational and experimental approach to design tailor-made impregnation products with optimized penetration depth on concrete or cementitious materials with different pore size distributions. First, a process-based numerical model, calibrated experimentally for one sol composition and several cementitious material samples with different pore structures is developed. The model calculates the penetration depth for a specific pore structure. The optimization process utilizes the probabilistic and non-parametric Gaussian Processes regression method Gaussian Processes at two steps; first to make the choice of the optimal experimental design, and second to make predictions of physical properties based on the obtained training points. In the final step, the penetration depth is calculated for each mix combination in defined parameter range. The effectiveness of this approach is demonstrated on three cases. In the first instance, we optimized the impregnation product for the maximum penetration depth without any restrictions. With another two cases, we impose the restrictions on the gelation time, i.e. the time in which the sol reacts to gel. The validation of the procedure has been made by the use of a blind validation and shows promising results. The impregnation product penetrated significantly deeper with a product selected by using the described procedure compared to the considered best product before this optimization. The proposed procedure can be applied to a wide range of cementitious materials based on their pore size distribution data. This offers significant advantage compared to purely experimental approaches, where a set of experiments is required for each considered material.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Chemistry of the interaction between an alkoxysilane-based impregnation treatment and cementitious phases

  • Garcia-Lodeiro, Inés
  • Carmona-Quiroga, P.M.
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Blanco-Varela, María Teresa
Chemical compatibility with a wide range of materials is among the features that has driven the use of alkox- ysilanes as consolidants in built structures. Such compatibility is particularly important in cementitious materials where the reaction with portlandite may generate C-S-H gel, one of the main hydration phases of OPC. The cementitious matrix is a complex system, however, and the reaction of its many phases with alkoxysilanes, while poorly understood, may determine treatment efficacy. This article describes a detailed study of the individual interactions between an oligomeric alkoxysilane-based impregnation treatment previously shown to interact with the portlandite present in cement paste and the cementitious phases generated in ordinary portland cement hydration. The findings show that both portlandite and C-S-H gel interact with the silicon oligomers in the hydrolysed impregnation treatment to generate a C-S-H gel (in the case of portlandite) and a rise in C-S-H gel mean chain length (MCL). Ettringite is also altered in the presence of alkoxysilanes, transforming to gypsum and AH3. Its transformation generates a tetrahedral aluminium that is taken up into a high silicon gel sourced from the treatment to form an amorphous aluminosilicate gel. Monocarboaluminate and katoite also partially decompose in the interaction with the product, whereas gibbsite remains unaffected
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A Simple, Long-Lasting Treatment for Concrete by Combining Hydrophobic Performance with a Photoinduced Superhydrophilic Surface for Easy Removal of Oil Pollutants

  • Martínez Carrascosa, Luis Antonio
  • Zarzuela Sánchez, Rafael
  • Badreldin, Nabil
  • Mosquera Díaz, María Jesús
Superhydrophobic surfaces present promising applications in the protection of building materials, such as the self-cleaning effect promoted by their high water-repellent properties. However, these surfaces easily lose their properties when exposed to oil contaminants. This is a critical weak point for their application in building facades, which are exposed to environmental pollutants such as hydrocarbons and vandalism (e.g., grafitti). A viable strategy to remove oils is to produce superhydrophilic surfaces, which present underwater superoleo- phobic behavior. In the case of buildings, the use of this strategy can be considered counterproductive because it promotes their interaction with water, the main vehicle of most decay agents. In this work, we have successfully combined the advantages of a superhydrophilic coating with a hydrophobic impregnation treatment, which prevents water ingress into the porous structure of the substrate. Specifically, a photoinduced superhydrophilic surface was produced on concrete by simple spraying of a starting sol containing TiO2NPs, which create a Cassie-Baxter state, a silica oligomer, producing a compatible matrix promoting good adhesion to the substrate and polydimethylsiloxane as a hydrophobic agent. After being exposed to sunlight, the treated surfaces switched from superhydrophobic (SCA 160°) to superhydrophilic (SCA < 10°). These surfaces presented underwater superoleophobicity (SCA 152° with CHCl3) and oil-contaminated dust was easily cleaned without employing detergents. The photoactivation does not alter the protection against water absorption (>85% reduction). The treatment showed suitable adhesion to the substrate and good resistance
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Validation of alkoxysilane-based protective treatments for increasing service life of cementitious materials under different weathering conditions

  • Zarzuela Sánchez, Rafael
  • Luna Aguilera, Manuel Jesús
  • Gemelli, Giada María Chiara
  • González-Coneo, Jorge
  • Garcia-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Mosquera Díaz, María Jesús
Gradual degradation of cementitious materials by exposure to the environment decreases the lifespan of buildings, increasing maintenance andrepair costs. Surface treatments based on alkoxysilanes may prevent weathering effects and repair onset damages, though little attention is paid to how the physical-chemical alterations caused by weathering affect their performance. This work reports a comprehensive characterization/validation of an alkoxysilane-based protective treatment on a mortar subjected to different artificial aging processes (freeze-thaw, thermal cycles, carbonation and chlorides), including measurements of water transport, mechanical properties, reaction products and durability under freeze-thaw and sulfate exposure cycles. Formation of compact silica and C-S-H gel structures decreases porosity and water absorption rate with minimal effect on vapor permeability. Bulk mechanical reinforcement and waterproofing are substantially limited on freeze-thaw aged mortars, whereas surface hardness is barely increased for carbonated mortars. These properties were found to effectively increase the mortar resistance against sulfate and freeze-thaw induced damages.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Consolidation of artificial decayed portland cement mortars with an alkoxysilane-based impregnation treatment and its influence on mineralogy and pore structure

  • Garcia-Lodeiro, Inés
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Blanco-Varela, María Teresa
Surface treatments, especially hydrophobic agents to prevent water ingress and consolidants able to fill decay- induced cracks, are often proposed as a method for preserving stone cultural heritage, however its use to pro- tect concrete heritage is much less common. New products, specifically designed for concrete, have been developed. These products are based on alkoxysilanes that interact directly with the products of portland cement (OPC) hydration (essentially Ca(OH)2 and C-S-H) to generate additional C-S-H gel. This study assesses the effect of an impregnation treatment, based on alkosysilanes, on artificially decayed cement mortars, in terms of product penetration depth, changes in the porosity of mortars and changes in its mechanical strengths. Reduced porosity and enhanced mechanical strength attested to treatment efficacy. Substrate porosity and pore size distribution were not the only factors found to condition treatment effectiveness, however, mineralogical changes caused by the deterioration processes (such as the presence or absence of portlandite, or the presence of salts) modify the sol gelling time and the substrate surface energy, impacting treatment penetration depth.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo de hormigones con acción hidrofóbica y repelente al agua

  • González-Coneo, Jorge
En la mayor parte de los procesos de deterioro del hormigón, tales como corrosión, cristalización de sales o biodeterioro, interviene el agua. Para reducir la absorción de agua, se suelen emplear tratamientos superficiales que generan una superficie hidrófoba. Su principal inconveniente se relaciona con la limitada durabilidad de su efecto protector que está asociado a la escasa penetración de los tratamientos en el hormigón. Otra estrategia alternativa es la incorporación del componente hidrófobo, como aditivo, durante el proceso de fabricación. No obstante, esta estrategia presenta también inconvenientes asociados a la ralentización de las reacciones de hidratación del cemento y a la dificultad de mezclado de los componentes, que provocan un claro empeoramiento de las propiedades mecánicas del material. En esta Tesis Doctoral, se han desarrollado diversas estrategias de síntesis para producir tres formulaciones, basadas en alcoxisilanos, con aplicación como aditivos en el proceso de fabricación del hormigón. Las formulaciones son empleada con el objetivo de dotar al hormigón de propiedades hidrófobas y establecer, además, una interacción efectiva con las fases cementantes, promoviendo la formación de silicato de calcio hidratado (gel C-S-H). Adicionalmente, se exploró la incorporación de áridos funcionalizados con un agente hidrófobo con capacidad de interaccionar simultáneamente con los componentes del hormigón y con las formulaciones objeto de investigación. Para evaluar la efectividad de las estrategias empleadas, se ha llevado a cabo una completa caracterización de los siguientes parámetros: (i) procesos de hidratación del cemento en presencia de las formulaciones desarrolladas; (ii) interacciones químicas entre los componentes del hormigón y las formulaciones; (iii) microestructura del hormigón fabricado y (iv) propiedades mecánicas, hídricas y texturales del hormigón. Los resultados obtenidos han demostrado que las estrategias aplicadas permiten obtener hormigones con una elevada resistencia a la absorción de agua, consiguiéndose la repelencia en algunas de las formulaciones ensayadas. Además, se confirmó que la formación de silicato de calcio hidratado, como consecuencia de la interacción entre alcoxisilano y portlandita resultante de las reacciones de hidratación, contribuyen a una mayor cohesión del hormigón fabricado. También se determinó que las condiciones de curado tienen un efecto significativo en el comportamiento hidrofugante de los materiales, siendo más favorable en las condiciones de humedad reducida. Por último, destacar que en una de las formulaciones desarrolladas se comparó la eficacia y durabilidad del tratamiento aplicado como aditivo, con respecto a su aplicación en superficie y también se comparó con productos comerciales. En todos los casos, los mejores resultados fueron obtenidos con la formación desarrollada en nuestro laboratorio y aplicada como aditivo en el proceso de fabricación del hormigón.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Concrete as heritage: The social perception from heritage criteria perspective: The eduardo Torroja's work

  • Ramírez Guerrero, Gema
  • García Onetti, Javier
  • Chica Ruiz, Juan Adolfo
  • Arcila Garrido, Manuel
Eduardo Torroja Miret (1899-1961) was one of the most important Spanish engineers. His understanding of structures and materials made him a world reference in the field of engineering and architecture. Due to the lack of ornamentation in his works and the lack of heritage interpretation aimed at a non-specialist public, many of his works sometimes go unnoticed by inexperienced eyes and, despite his important legacy, Torroja remains a great unknown. This paper reports on the existing heritage perception of two of his most outstanding works in Spain, the Zarzuela Hippodrome and the Instituto Técnico de la Construcción y el Cemento (Eduardo Torroja Institute). To this end, surveys and interviews were carried out with visitors to both buildings based on different heritage criteria, such as their architectural importance, aesthetics, significance or representativeness, but also from the point of view of the available tourist infrastructure. The results show a lack of appreciation in the heritage criteria related to its architectural, historical and aesthetic values, combined with a lack of knowledge about Torroja and its way of understanding architectural beauty. © 2020 WITPress. All rights reserved., InnovaConcrete Project, funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 760858, supported this work. The administrators of the Zarzuela hippodrome and the staff of Eduardo Torroja Institute, who allowed the data collection, also supported the study
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Alkylsiloxane/alkoxysilane sols as hydrophobic treatments for concrete: A comparative study of bulk vs surface application

  • González-Coneo, Jorge
  • Zarzuela Sánchez, Rafael
  • Elhaddad, Farid
  • Martínez Carrascosa, Luis Antonio
  • Gil Montero, María Luisa Almoraima
  • Mosquera Díaz, María Jesús
Water and waterborne decay agents (e.g. salts, microorganisms) are commonly associated with undesired alterations and damages on concrete elements. A strategy to mitigate their impact is to decrease water retention in the material either by surface treatments or admixtures. In this work, hydrophobic concretes were developed by the addition of a hydrophobic sol containing TEOS and PDMS oligomers, synthetized by a surfactant-assisted sol-gel route, either as an admixture or as a surface treatment. The hydrophobic performance was similar for both application modes (>70% capillary absorption reduction) and higher than concrete containing a commercial (calcium stearate) admixture or a nanosilica-based hydrophobic coating. Addition as an admixture led to a higher durability in the rain and abrasion tests. The hydrophobic sol as an admixture promotes an increase of surface roughness and porosity, as well as the formation of C–S–H like reaction products with the cement matrix components, as evidenced by AFM, MIP, SEM and FTIR. Despite the higher porosity, impact resistance and material cohesion were not negatively affected respect to the plain concrete. Application as a surface treatment decreased porosity and led to a higher amorphous SiO2 content. The material cohesion and impact resistance was increased by this application, although penetration was limited to the first 4 mm and the hydrophobic properties were more susceptible to mechanical damages to the surface. © 2021 The Authors, This project has received funding from the European Union's Horizon 2020 - Research and Innovation Framework Programme under grant agreement No 760858; This work has been financed by the Spanish State Research Agency R&D program 2020 (Project reference: PID2020-115843RB-I00); This work has been co-financed by the European Union under the 2014-2020 ERDF Operational Programme and by the Department of Economic Transformation, Industry, Knowledge, and Universities of the Regional Government of Andalusia (Project reference: FEDER- UCA18-106613).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Chemistry of the interaction between an alkoxysilane-based impregnation treatment and cementitious phases

  • Garcia-Lodeiro, Inés
  • Carmona-Quiroga, P.M.
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Blanco-Varela, María Teresa
Chemical compatibility with a wide range of materials is among the features that has driven the use of alkoxysilanes as consolidants in built structures. Such compatibility is particularly important in cementitious materials where the reaction with portlandite may generate C-S-H gel, one of the main hydration phases of OPC. The cementitious matrix is a complex system, however, and the reaction of its many phases with alkoxysilanes, while poorly understood, may determine treatment efficacy. This article describes a detailed study of the individual interactions between an oligomeric alkoxysilane-based impregnation treatment previously shown to interact with the portlandite present in cement paste and the cementitious phases generated in ordinary portland cement hydration. The findings show that both portlandite and C-S-H gel interact with the silicon oligomers in the hydrolysed impregnation treatment to generate a C-S-H gel (in the case of portlandite) and a rise in C-S-H gel mean chain length (MCL). Ettringite is also altered in the presence of alkoxysilanes, transforming to gypsum and AH(3). Its transformation generates a tetrahedral aluminium that is taken up into a high silicon gel sourced from the treatment to form an amorphous aluminosilicate gel. Monocarboaluminate and katoite also partially decompose in the interaction with the product, whereas gibbsite remains unaffected.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A patchy particle model for C-S-H formation

  • Prabhu, Achutha
  • Dolado, Jorge S.
  • Koenders, Eddie A.B.
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Garcia-Lodeiro, Inés
  • Blanco-Varela, María Teresa
The composition and structure of Calcium-Silicate-Hydrate (C-S-H) phases depends on various reaction parameters leading to its formation. Molecular Dynamic simulation studies probing the formation and structure of C-S H are generally computationally expensive and can reach only very short time scales. Herein, we propose a coarse graining approach to model the formation of C-S-H, using patchy particles and a modified Patchy Brownian Cluster Dynamics algorithm. The simulations show that patchy particle systems can recover the qualitative kinetic evolution of C-S-H formation, and the obtained final structures were comparable to previously reported molecular dynamics studies and experiments. The model was extended to study the effect of water in the polymerization of tetraethoxysilane oligomers, the principal component of an impregnation treatment for deteriorated concrete surfaces. The intermediate system properties predicted by the simulations, such as viscosity and gel time, and structure were found to be well in accordance with the tailored experiments.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Multifunctional silane-based superhydrophobic/impregnation treatments for concrete producing C-S-H gel: Validation on mockup specimens from European heritage structures

  • Zarzuela Sánchez, Rafael
  • Luna Aguilera, Manuel Jesús
  • González-Coneo, Jorge
  • Gemelli, Giada María Chiara
  • Andreouli, Dia
  • Kaloidas, Vasilis
  • Mosquera Díaz, María Jesús
Many of the concrete structures that conform our modern cultural heritage are in need of repair and protective interventions. Silane-based impregnation treatments can be used to repair onset cracks and reinforce the surface due to their ability to produce silica and C-S-H gels, and can be modified by incorporating hydrophobic precursors to create multifunctional treatments that also protect from water ingress. Since the effectiveness of impregnation treatments is dependent on substrate properties and chemical-physical changes it may have experienced over time, validation using standard materials may not always be representative of on-site application. In this work, the effectiveness of three innovative silane-based impregnation treatments developed by our group (two of them combining superhydrophobic properties) was evaluated on mockup specimens, which simulate the properties of the cementitious materials from six different heritage structures across Europe, artificially aged to simulate weathering by three methods: carbonation, chloride ingress and physical damages (freeze–thaw and thermal cycles). The characterization of the treatments showed they are compatible in terms of chemical interaction, applicability and minimal aesthetical alterations. Surface resistance and ultrasound pulse measurements have been used to assess the improvement in mechanical properties. The incorporation of hydrophobic components and fumed silica has a relatively low impact over the mechanical properties while it significantly reduces water absorption and grants water repellent properties to the surface, giving rise to a superhydrophobic performance. © 2022 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Achieving superhydrophobic surfaces with tunable roughness on building materials via nanosecond laser texturing of silane/ siloxane coatings

  • Martínez Carrascosa, Luis Antonio
  • Zarzuela Sánchez, Rafael
  • Botana Galvín, Marta
  • Botana Pedemonte, Francisco Javier
  • Mosquera Díaz, María Jesús
In this work, we employ a versatile laser-based top-down approach that allows to create superhydrophobic and hydrophobic surfaces, with controlled roughness and wetting properties, on marble and potentially other building materials. The process involves two stages: (1) application of an organically modified silica coating to reduce surface energy. (2) Controlled texturing of the coating by ablation using a nanosecond-pulse laser. In general terms, at higher laser fluence (energy per unity of area), the contact angles increased from 110 degrees of the non-textured surface to values around 155 degrees, following a nearly linear correlation with the measured roughness values. Starting from fluence values of 154 J cm-2, the surfaces displayed water repellence (hysteresis <= 10 degrees) and the micrographs showed the formation of sub-micrometric structures on top of the micro-roughness by melting and re-deposition of the coating material, suggesting the formation of a Cassie-Baxter wetting regime. Ablation at lower fluences created a random micro-roughness, leading to static contact angles of 135-145 degrees but no water repellence, which is indicative of a Wenzel wetting regime. At the highest fluence values tested, the increasing trends respect roughness and hydrophobic/water repellent properties are inverted due to the damages suffered by the coating. In terms of durability, the coating demonstrated a good adhesion to the stone surface, maintaining its superhydrophobic properties after repeated cycles of an "adhesive tape test". The sand falling test showed that water repellence is relatively sensitive to abrasion, although the hydrophobic character of the coating is maintained.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Dye decomposition and air de-pollution performance of TiO2/SiO2 and N-TiO2/SiO2 photocatalysts coated on Portland cement mortar substates

  • Khannyra, Souad
  • Gil Montero, María Luisa Almoraima
  • Addou, Mohammed
  • Mosquera Díaz, María Jesús
In this study, the newly synthesized TiO2 and N doped TiO2 clusters were added to silica sol to synthesize N-TiO2/SiO2 composites via the sol-gel method. Afterwards, the prepared cols were applied by brushing on portland cement. Doping with nitrogen significantly increased the absorption of TiO2 towards the visible region, thus, increasing the photocatalytic activity. SEM characterization of the treated samples showed that the clusters were distributed in form of aggregates on the samples' surface. The self-cleaning and air de-polluting performances were assessed through methylene blue degradation and the oxidation of nitrogen oxide, resulting in methylene blue (MB) removal of 85% and 78% after 60 min of irradiation for SN10TiO(2) and STiO2, respectively. Regarding air de-pollution performance, the newly synthesized photocatalysts showed the ability of NOx reduction. However, their efficiency was somewhat lower, in which 23.81% of NO has been oxidized by the sample SN10TiO(2), while SP25 showed a total NO conversion of 38.98%. The powdered xerogels of the newly synthesized nanoparticles revealed high photocatalytic efficiency concerning NO oxidation, resulting in a higher performance compared to those obtained by the xerogel containing P25, Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This project has received funding from the European Union's Horizon 2020 Research and Innovation Framework Programme under grant agreement no 760858. This work has been financed by the Spanish State Research Agency R&D programme 2020 (Project reference: PID2020-115843RB-I00) and has been co-financed by the European Union under the 2014-2020 ERDF Operational Programme and by the Department of Economic Transformation, Industry, Knowledge, and Universities of the Regional Government of Andalusia (Project reference: FEDER-UCA18-106613). S. Khannyra would also like to thank the Aula del Estrecho of the University of Cadiz for her predoctoral grant.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A Tourism Potential Index for Cultural Heritage Management through the Ecosystem Services Approach

  • Ramírez Guerrero, Gema
  • García Onetti, Javier
  • Arcila Garrido, Manuel
  • Chica Ruiz, Juan Adolfo
Tourism as a tool for the enhancement and conservation of heritage represents an opportunity for many managers of cultural properties. However, despite the numerous works developed so far on tourism governance, the elaboration of preliminary studies for decision-making in heritage buildings is still a challenge. Considering the ecosystem services approach, an index is proposed which allows tourism and cultural heritage managers to analyze and quantify the level of tourist exploitation (use) of a monument for the services (benefits) that it offers to society. In this paper, a multi-criteria evaluation system was proposed, related to the main use of the building and its relationship with various tourism components, which have been classified as cultural, leisure, recreational, lodging, catering, intermediation, transportation, and event organization. The model has been applied to the Parroquia del Mar (Alicante, Spain) of great cultural relevance, but not exploited for tourism. The results obtained demonstrate the usefulness and validity of the model, considered as a tool capable of bridging the gap between heritage conservation and its touristic use, highlighting the importance of the services offered as necessary attributes for its (re)valuation, combining the social benefits of its exploitation, its touristic use and the awareness of its conservation and protection.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Changes in OPC mortars after physical and chemical decay processes

  • García-Lodeiro, Inés
  • Zarzuela, Rafael
  • Mosquera, Maria Jesus
  • Blanco-Varela, María Teresa
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., Nowadays, the most common strategies employed to delay concrete degradation are related to modifications carried out during its fabrication process, such as reducing the water/cement ratio and therefore decreasing the porosity of concrete. In the case of old concrete-based structures built in the 20th Century, no particular care was given to critical parameters increasing their long-term performance, such as the water to cement ratio and the thickness of the concrete layer, because decay mechanisms were still largely unknown. One common methodology proposed for preserving concrete heritage is the use of surface treatments, especially hydrophobic agents to prevent water ingress and consolidants able to fill cracks produced by decay. In this sense, some of the new products that are being developing are based on consolidants that can directly interact with hydrated products from the OPC hydration (basically with Ca(OH)2 and C-S-H) generating new C-S-H gel. Given the interaction between these new products and those generated during the hydration of the cement paste, a deeper knowledge of how the C-S-H gel is modified after the various aging processes is vital. The present work analyzes changes in both the microstructure (porosity) of mortar (MIP), as well as changes in the C-S-H structure of the OPC paste (FTIR), after different types of physical and chemical decay processes. Experimental results indicated that the type of deterioration process highly affects the total porosity and the pore size distribution but also the mineralogy and the microstructure of the C-S-H., This work has been funded by the European Union´s Horizon H2020 Research and Innovation Programme under Grant Agreement Nº760858.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Producing C-S-H gel by reaction between silica oligomers and portlandite: A promising approach to repair cementitious materials

  • Zarzuela, Rafael
  • Luna, Manuel
  • Carrascosa, Luis M.
  • Yeste, María Pilar
  • García-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Cauqui, Miguel A.
  • Rodríguez-Izquierdo, José M.
  • Mosquera, Maria Jesus
Impregnation treatments are one of the alternatives to protect concrete-based building and monuments from weathering degradation. However, it is important to consider the chemical compatibility of the reaction products with the building material. The impregnation product studied here consists of a silica oligomer able to polymerize, by a simple sol-gel process, inside the pore structure of concrete. In this work, we investigate the ability of this impregnation treatment to produce C-S-H gel in contact with cement paste. A complete characterization of the reaction products demonstrated that the silanol groups from silica oligomers react with the portlandite present in the cement paste generating a material with the chemical, structural and morphological features of C-S-H gel. Simultaneously, the 29Si NMR results indicate that the Sisingle bondO units are incorporated into the existing C-S-H, increasing its chain length. These results open the way for a simple concrete structures repairing procedure., This project has received funding from the European Union's Horizon 2020 - Research and Innovation Framework Programme under grant agreement No 760858; and from Spanish Government/FEDER-EU under research project MAT2017-84228-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TEOS modified with nano-calcium oxalate and PDMS to protect concrete based cultural heritage buildings

  • Kapetanaki, Kali
  • Vazgiouraki, Eleftheria
  • Stefanakis, Dimitris
  • Fotiou, Afroditi
  • Anyfantis, George C.
  • García-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Arabatzis, Ioannis
  • Maravelaki, Pagona N.
Cultural Heritage constructions of twentieth century consist largely of mortar and concrete substrates. These concrete structures have suffered different types of decay processes. One of the most widely used consolidants is the Tetraethoxysilane (TEOS), which forms the basis of most existing commercial strengthening agents to protect porous building materials against deterioration. A novel, non-toxic strengthening and protective agent for mortar and concrete substrates was synthesized in a one-pot sol-gel procedure, incorporating in TEOS, Polydimethyl siloxane (PDMS), and nanoparticles of synthesized calcium oxalate (CaOx). PDMS provided hydrophobicity and reduced surface tension that causes cracks on the surface of produced xerogel. The synthesized nanocomposite both in sol and xerogel form was assessed with a variety of analytical techniques (FTIR, XRF, SEM, Optical Microscopy, Dynamic Light Scattering, Thermogravimetric analysis). The excellent physical properties of the produced colloidal solution of the nanocomposite, such as low viscosity and density, allow a penetration up to 2 cm from the surface in the treated cement mortars. This involved improvement of the mechanical and physical properties, such as the dynamic modulus of elasticity and increased water repellency. The treated cement mortars exhibited well-preserved aesthetic surface parameters and significant maintenance of the treatment. Furthermore, no harmful byproducts were identified indicating the nanocomposite compatibility to the siliceous and carbonate nature of the treated cement mortars., This work has been supported by the InnovaConcrete project funded by the European program Horizon 2020 (GA no. 760858)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The importance of physical parameters for the penetration depth of impregnation products into cementitious materials: Modelling and experimental study

  • Perko, Janez
  • Zarzuela, Rafael
  • García-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Mosquera, Maria Jesus
  • Seemann, Timo
  • Yu, Li
The performance of impregnation treatments used for protection and remediation of porous building materials relies on sufficient penetration depth. The penetration of sol–gel impregnation products into partially saturated porous material is driven by capillary suction and depends on material properties, such as pore size distribution on one hand, and on the other hand on sol physical properties, viscosity, density, surface tension and contact angle, along with the time in which the sol gels. In this work we analyse, by the way of modelling and experiments, the penetration depth of a sol–gel impregnation product as the function of pore size distribution and sol properties. The main goal is to determine the importance of sol’s physical properties for the penetration depth for a specific pore size, which will serve as a basis of the optimization of impregnation products to maximize their penetration depth. The model is first calibrated in terms of penetration depth and sol uptake by the experimental data obtained from mortar samples each with a specific pore-size distribution. The correlation between penetration depth and physical parameters is then established by the use of Monte-Carlo method. The results show that the most important parameters for the optimization are surface tension, whose influence increases for larger pores, and gelation time, which with decreasing importance for larger pores., The work described in this manuscript has been performed under InnovaConcrete EC project, supported by funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement N° 760858., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mineralogical and microstructural alterations in a portland cement paste after an accelerated decalcification process

  • García-Lodeiro, Inés
  • Goracci, Guido
  • Dolado, Jorge S.
  • Blanco-Varela, María Teresa
Cement paste leaching and concomitant decalcification is a common cause of concrete structure deterioration. Such alterations entail microstructural changes that condition concrete durability. This study analysed those changes in cement pastes exposed to accelerated decalcification, layer-by-layer, from the surface in contact with the leaching agent, 6 M NH4NO3, to the unaltered area. The microstructural changes were analysed with BSEM, MIP and BET whilst the mineralogical and nanostructural alterations in each layer were assessed with XRD, FTIR, 29Si and 27Al MAS NMR and BSD. Decalcification affected not only portlandite and CSH gel, but also the anhydrous clinker and ettringite, inducing major micro- and nano-structural changes, particularly in the two layers closest to the leaching agent. CSH gel decalcification was more intense in the outer layers where long chain gels co-existed with silicon rich gels. BDS, in turn, revealed differences between the amount of bound water in the surface interfacing with the leaching agent and in the leaching front. More specifically, larger numbers of water molecules were tightly bound to silanol groups in the outer, whereas hydroxyl group distribution was more orderly in the inner layers., This study was funded by the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No. 760858. Funding was also received from the Regional Government of Madrid, (S2018/NMT-4372 TOP Heritage-CM Programme)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Consolidation of artificial decayed portland cement mortars with an alkoxysilane-based impregnation treatment and its influence on mineralogy and pore structure

  • García-Lodeiro, Inés
  • Zarzuela, R.
  • Mosquera, M.J.
  • Blanco-Varela, María Teresa
Surface treatments, especially hydrophobic agents to prevent water ingress and consolidants able to fill decay-induced cracks, are often proposed as a method for preserving stone cultural heritage, however its use to protect concrete heritage is much less common. New products, specifically designed for concrete, have been developed. These products are based on alkoxysilanes that interact directly with the products of portland cement (OPC) hydration (essentially Ca(OH) and C-S-H) to generate additional C-S-H gel. This study assesses the effect of an impregnation treatment, based on alkosysilanes, on artificially decayed cement mortars, in terms of product penetration depth, changes in the porosity of mortars and changes in its mechanical strengths. Reduced porosity and enhanced mechanical strength attested to treatment efficacy. Substrate porosity and pore size distribution were not the only factors found to condition treatment effectiveness, however, mineralogical changes caused by the deterioration processes (such as the presence or absence of portlandite, or the presence of salts) modify the sol gelling time and the substrate surface energy, impacting treatment penetration depth., This work has received funding from the European Union's Horizon 2020 - Research and Innovation Framework Programme under grant agreement No 760858 (Innovaconcrete project). Funding from the Regional Government of Madrid (TopHeritage-CM; S2018/NMT_4372) is also gratefully acknowledged. Finally, the support by the Spanish Government/FEDER-EU (MAT 2017-84228-R) is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterisation and diagnosis of heritage concrete: case studies at the Eduardo Torroja Institute, Madrid, Spain

  • Carmona-Quiroga, Paula
  • Pachón Montaño, Alicia
  • Queipo de Llano Moya, Juan
  • Martín-Caro, José Antonio
  • López, David
  • Paniagua, Illán
  • Martínez Sierra, Isabel
  • Rubiano, Francisco
  • García-Lodeiro, Inés
  • Fernández-Ordóñez, L.
  • Blanco-Varela, María Teresa
  • Frías López, Elena
That the preservation of twentieth concrete heritage is an area scantly explored can be attributed to a lack of appreciation for such a young material. In most cases conservation is broached from a technical perspective with little regard for heritage value. Ongoing assessment of the condition of structures is the primary strategy to minimise such misguided action. This study involved characterising the condition of the concrete in a number of singular elements forming part of the Eduardo Torroja Institute for Construction Science headquarters at Madrid, Spain, a modernist compound listed by the city of Madrid as a protected asset. The in situ findings using non-destructive and laboratory techniques revealed the core concrete to be in good condition. The surface material, however, exhibits signs of durability issues calling for conservation treatments and techniques compatible with the preservation of the integrity and authenticity of this young heritage material., This study was funded by the European Union’s Horizon H2020 Research and Innovation Pro-gramme under Grant Agreement No. 760858 (In-novaConcrete) and by the Regional Government of Madrid (TopHeritage-CM; S2018/NMT_4372). The professional support provided by the CSIC’s ‘Open Heritage: Research and Society (PTI-PAIS)’ Interdisciplinary Thematic Platform is gratefully ac-knowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of alkoxysilane on early age hydration in portland cement pastes

  • Husillos Rodríguez, N.
  • Martínez-Ramírez, S.
  • Zarzuela, R.
  • Mosquera, M. J.
  • Blanco-Varela, María Teresa
  • García-Lodeiro, Inés
14 pags., 12 figs., 5 tabs., Silanes added during mortar or concrete preparation, may modify the fresh state properties, hydration kinetics and mechanical strength of the final product. The effects of silanes on cement hydration have been widely studied in the literature, however, there is some controversy about its effect at short ages. The present study was undertaken to determine the effect of a TEOS-based alkoxysilane (UCA-T), produced by ultrasound-assisted pre-hydrolysis of an oligomeric precursor, on early age cement paste hydration. The nature of the processes modifying the various stages of cement hydration kinetics in the presence of the alkoxysilane was ascertained by analysing paste composition at several ages (defined on the grounds of calorimetric curve results) using XRD, TG-DTG, FTIR and Raman spectroscopy. The calorimetric curve of pastes containing UCA-T exhibited a new early age, pre-induction period exothermal peak, indicative of UCA-T hydrolysis, C3A and C3S dissolution and ettringite and C–S–H gel precipitation. Portlandite, however, did not precipitate but reacts with the Si(OH)4 sourced from UCA-T hydrolysis to generate further C–S–H gel. The induction period following on that new exothermal peak was considerably longer than the period observed in the reference cement, an effect that intensified at higher UCA-T content., This study was funded by the European Union’s Horizon H2020 Research and Innovation Programme under Grant Agreement No. 760858. Funding was also received from the Regional Government of Madrid, (S2018/NMT-4372 TOP Heritage-CM Programme). The support received from the CSIC’s PTI-PAIS network during the roll-out of both projects is likewise gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A patchy particle model for C-S-H formation

  • Prabhu, Achutha
  • Dolado, Jorge S.
  • Koenders, Eddie A.B.
  • Zarzuela, Rafael
  • Mosquera, María J.
  • García-Lodeiro, Inés
  • Blanco-Varela, María Teresa
The composition and structure of Calcium-Silicate-Hydrate (C-S-H) phases depends on various reaction parameters leading to its formation. Molecular Dynamic simulation studies probing the formation and structure of C-S-H are generally computationally expensive and can reach only very short time scales. Herein, we propose a coarse graining approach to model the formation of C-S-H, using patchy particles and a modified Patchy Brownian Cluster Dynamics algorithm. The simulations show that patchy particle systems can recover the qualitative kinetic evolution of C-S-H formation, and the obtained final structures were comparable to previously reported molecular dynamics studies and experiments. The model was extended to study the effect of water in the polymerization of tetraethoxysilane oligomers, the principal component of an impregnation treatment for deteriorated concrete surfaces. The intermediate system properties predicted by the simulations, such as viscosity and gel time, and structure were found to be well in accordance with the tailored experiments., The work described in this manuscript has been performed under InnovaConcrete EC project, supported by funding from the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement N° 760858. AP and JSD also acknowledge the support received from the BASKRETE initiative and the Joint Transborder Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Validation of alkoxysilane-based protective treatments for increasing service life of cementitious materials under different weathering conditions

  • Zarzuela, Rafael
  • Luna, Manuel
  • Gemelli, Giada
  • Gonzalez-Coneo, Jorge
  • García-Lodeiro, Inés
  • Blanco-Varela, María Teresa
  • Mosquera, Maria Jesus
Gradual degradation of cementitious materials by exposure to the environment decreases the lifespan of buildings, increasing maintenance andrepair costs. Surface treatments based on alkoxysilanes may prevent weathering effects and repair onset damages, though little attention is paid to how the physical-chemical alterations caused by weathering affect their performance. This work reports a comprehensive characterization/validation of an alkoxysilane-based protective treatment on a mortar subjected to different artificial aging processes (freeze-thaw, thermal cycles, carbonation and chlorides), including measurements of water transport, mechanical properties, reaction products and durability under freeze-thaw and sulfate exposure cycles. Formation of compact silica and C-S-H gel structures decreases porosity and water absorption rate with minimal effect on vapor permeability. Bulk mechanical reinforcement and waterproofing are substantially limited on freeze-thaw aged mortars, whereas surface hardness is barely increased for carbonated mortars. These properties were found to effectively increase the mortar resistance against sulfate and freeze-thaw induced damages., Peer reviewed