Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Regeneration of Exhausted Palladium-Based Membranes: Recycling Process and Economics: Recycling Process and Economics

  • Toro, Luigi
  • Moscardini, Emanuela
  • Baldassari, Ludovica M.
  • Forte, Flavia
  • Coletta, Jacopo
  • Palo, Emma
  • Cosentino, Vittoria
  • Angelini, Fabio
  • Arratibel Plazaola, Alba
  • Pagnanelli, Francesca
  • Altimari, Pietro
The aim of the present work is the recycling treatment of tubular α-Al2O3-supported ceramic membranes with a Pd/Ag selective layer, employed in hydrogen production with integrated CO2 capture. A nitric acid leaching treatment was investigated, and recovered ceramic supports were characterized, demonstrating their suitability for the production of novel efficient membranes. The main objective was the metal dissolution that preserved the support integrity in order to allow the recovered membrane to be suitable for a new deposition of the selective layer. The conditions that obtained a satisfactory dissolution rate of the Pd/Ag layer while avoiding the support to be damaged are as follows: nitric acid 3 M, 60 °C and 3.5 h of reaction time. The efficiency of the recovered supports was determined by nitrogen permeance and surface roughness analysis, and the economic figures were analysed to evaluate the convenience of the regeneration process and the advantage of a recycled membrane over a new membrane. The experimentation carried out demonstrates the proposed process feasibility both in terms of recycling and economic results.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membrane for CO2/N2 separation: the influence of the casting solution concentration on its morphology, thermal properties and gas separation performance

  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Sánchez-Laínez, Javier
  • Téllez, Carlos
  • Coronas, Joaquín
The present work is focused on the study of the effect that the casting solution concentration has on the morphology and gas separation performance of poly(ether-block-amide) copolymer membranes (Pebax® MH 1657). With this aim, three different concentrations of Pebax® MH 1657 in the casting solution (1, 3 and 5 wt%) were used to prepare dense membranes with a thickness of 40 µm. The morphology and thermal stability of all membranes were characterized by scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, rotational viscometry and thermogravimetric analyses. An increase in crystallinity was notable when the amount of solvent in the Pebax® MH 1657 solution was higher, mainly related to the polymer chains arrangement and the solvent evaporation time. Such characteristic seemed to play a key role in the thermal degradation of the membranes, confirming that the most crystalline materials tend to be thermally more stable than those with lower crystallinity. To study the influence of their morphology and operating temperature on the CO2 separation, gas separation tests were conducted with the gas mixture CO2/N2. Results indicated that a compromise must be found between the amount of solvent used to prepare the membranes and the crystallinity, in order to reach the best gas separation performance. In this study, the best performance was achieved with the membrane prepared from a 3 wt% casting solution, reaching at 35°C and under a feed pressure of 3 bar, a CO2 permeability of 110 Barrer and a CO2/N2 selectivity of 36., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 760944 (MEMBER project). Also, financial support from the Spanish Ministry of Science, Innovation and Universities and FEDER (MAT2016-77290-R), the Aragón Government (T43-17R) and the ESF is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sized-controlled ZIF-8 nanoparticle synthesis from recycled mother liquors: Environmental impact assessment

  • García Palacín, Marta
  • Martínez, José I.
  • Paseta, Lorena
  • Deacon, Adam
  • Johnson, Timothy
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
The effect of different deprotonators as well as washing steps and drying procedure on the synthesis of ZIF-8 from the mother liquor was investigated. The morphology, thermal stability, crystallinity, and surface area of the synthesized MOF were investigated. In addition, life-cycle assessment (LCA) or, in other words, eco-balance, was implemented as well. LCA compares the full range of environmental effects associated with the product by evaluating all inputs and outputs of material flows and predicting how such flow will affect the environment. ZIF-8 nanocrystals were synthesized from the recycled mother liquors using NaOH or NH4OH thus preserving the main characteristics of the ZIF-8 nanoparticles derived from the initial synthesis. The rest of the characterization methods confirmed the suitability of the synthesis methodology considering the phase purity of the obtained ZIF-8 and nanometer size particles. This procedure enabled us not only to obtain phase pure ZIF-8 but also to substantially decrease the amount of solvent used for washing making it a sustainable process., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 760944 (MEMBER project). Also, financial support from the Spanish Ministry of Science, Innovation and Universities and FEDER (MAT2016-77290-R), the Aragón Government (T43-17R) and the ESF is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membranes in CO2 separation applications

  • Selomon Embaye, Alula
  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Poly(ether-block-amide) (PEBA, commercialized as Pebax) copolymer membranes show a highly promising platform for preparing high-performance membranes for CO2 capture from process streams containing CH4 and N2. Pebax combines high CO2 affinity with the desired mechanical strength for polymeric membranes thanks to its flexible polyether segment and hard polyamide block, respectively. Furthermore, researchers have been improving the performance of these membranes by preparing a thin Pebax selective layer on top of porous supports and by incorporating inorganic and organic nanofillers into the Pebax matrix to overcome the permeance-selectivity limit. The chemical and structural characteristics of Pebax membranes according to the different fabrication techniques and parameters are discussed first. Then, the recent developments in terms of both Pebax-based thin film composite and mixed matrix membranes are summarized. Finally, thermal and water stabilities of these membranes are addressed., This project has received funding from the European Union Horizon 2020 research and innovation program under Grant Agreement No. 760944 (MEMBER project). Also, financial support from the Research Project PID2019-104009RB-I00/AEI/10.13039/501100011033 and the Aragón Government (Grant T43-20R and L. Martínez-Izquierdo Ph.D. grant) is gratefully acknowledged. Finally, we would like to thank the European Commission–Education, Audiovisual and Culture Executive Agency (EACEA) for the Erasmus Mundus scholarship under the program: Erasmus Mundus Master in Membrane Engineering for a Sustainable Word (EM3E-4SW), Project Number- 574441-EPP-1-2016-1-FR-EPPKA1-JMD-MOB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres—long-term experimental study

  • Perea-Cachero, Adelaida
  • Etxeberria-Benavides, Miren
  • David, Oana
  • Deacon, Adam
  • Johnson, Timothy
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H2/CO2 pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H2/CO2 selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H2/CO2 separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H2 permeance was in the 22–47 GPU range corresponding to 22–32 H2/CO2 selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol.237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas)., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 760944 (MEMBER project). Also, financial support from the research project PID2019-104009RB-I00/AEI/10.13039/501100011033 from the Spanish Agencia Estatal de Investigación (AEI) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of ZIF-94 from recycled mother liquors: Study of the influence of its loading on postcombustion CO2 capture with pebax based mixed matrix membranes

  • Hasan, Md. Rafiul
  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Global energy demand is met in large part, by burning of fossil fuels, which is causing global warming. Mixed matrix membranes (MMMs) with metal organic frameworks (MOFs) as fillers are an interesting alternative for capturing post combustion CO2 which would make the energy sector sustainable. This research is focused on the synthesis of MOF ZIF-94 from the recycling of its mother liquors and the incorporation of synthesized MOF into a Pebax MH 1657 for MMM fabrication. The pH and the temperature of ZIF-94 synthesis are modified and monitored and this results in various nanoparticle diameters (average particle size in the range of 41 ± 8–180 ± 73 nm). Incorporation of ZIF-94 significantly improves the performance of the bare Pebax MH 1657 membrane. The maximum CO2/N2 selectivity and CO2 permeability are obtained for 10 wt% ZIF-94 loading in 9 wt% (polymer concentration in 70/30 (v/v) ethanol/water solution) Pebax MH 1657 matrix being 36 ± 7 (71% increment compared to bare membrane) and 137 ± 31 Barrer (80% improvement), respectively., This project received funding from the European Union Horizon 2020 research and innovation program under Grant Agreement No. 760944 (MEMBER project). Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Agencia Estatal de Investigación, Spain) and Grant T43-20R (the Aragón Government) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the ZIF-L to ZIF-8 transformation from fundamentals to fully costed kilogram-scale production

  • Deacon, Adam
  • Briquet, Ludovic
  • Malankowska, Magdalena
  • Massingberd-Mundy, Felicity
  • Rudić, Svemir
  • Hyde, Timothy l.
  • Cavaye, Hamish
  • Coronas, Joaquín
  • Poulston, Stephen
  • Johnson, Timothy
The production of MOFs at large scale in a sustainable way is key if these materials are to be exploited for their promised widespread application. Much of the published literature has focused on demonstrations of preparation routes using difficult or expensive methodologies to scale. One such MOF is nano-zeolitic imidazolate framework-8 (ZIF-8) – a material of interest for a range of possible applications. Work presented here shows how the synthesis of ZIF-8 can be tracked by a range of methods including X-ray diffraction, thermo gravimetric analysis and inelastic neutron scattering – which offer the prospect of in-line monitoring of the synthesis reaction. Herein we disclose how the production of nano-ZIF-8 can be conducted at scale using the intermediate phase ZIF-L. By understanding the economics and demonstrating the production of 1 kg of nano-ZIF-8 at pilot scale we have shown how this once difficult to make material can be produced to specification in a scalable and cost-efficient fashion., The research leading to these results was partially funded by the European Union under grant agreement no. 760944 project MEMBER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Synthesis of zeolitic imidazolane frameworks from recycled mother liquors: Application to CO2/N2 separation with Pebax® mixed matrix membranes

  • Hasan, Md. Rafiul
  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., This project has received funding from the European Union Horizon 2020 research and innovation program under grant agreement No 760944 (MEMBER project). Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membrane for CO2/N-2 separation: the influence of the casting solution concentration on its morphology, thermal properties and gas separation performance

  • Martinez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Sanchez-Lainez, Javier
  • Tellez, Carlos
  • Coronas, Joaquín
The present work is focused on the study of the effect that the casting solution concentration has on the morphology and gas separation performance of poly(ether-block-amide) copolymer membranes (Pebax (R) MH 1657). With this aim, three different concentrations of Pebax (R) MH 1657 in the casting solution (1, 3 and 5 wt%) were used to prepare dense membranes with a thickness of 40 mu m. The morphology and thermal stability of all membranes were characterized by scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, rotational viscometry and thermogravimetric analyses. An increase in crystallinity was notable when the amount of solvent in the Pebax (R) MH 1657 solution was higher, mainly related to the polymer chains arrangement and the solvent evaporation time. Such characteristic seemed to play a key role in the thermal degradation of the membranes, confirming that the most crystalline materials tend to be thermally more stable than those with lower crystallinity. To study the influence of their morphology and operating temperature on the CO2 separation, gas separation tests were conducted with the gas mixture CO2/N-2. Results indicated that a compromise must be found between the amount of solvent used to prepare the membranes and the crystallinity, in order to reach the best gas separation performance. In this study, the best performance was achieved with the membrane prepared from a 3 wt% casting solution, reaching at 35 degrees C and under a feed pressure of 3 bar, a CO2 permeability of 110 Barrer and a CO2/N-2 selectivity of 36.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Understanding the ZIF-L to ZIF-8 transformation from fundamentals to fully costed kilogram-scale production

  • Deacon, A.
  • Briquet, L.
  • Malankowska, M.
  • Massingberd-Mundy, F.
  • Rudic, S.
  • Hyde, T. L.
  • Cavaye, H.
  • Coronas, J.
  • Poulston, S.
  • Johnson, T.
The metal-organic framework ZIF-8 has demonstrated promise for a wide range of applications, but its synthesis typically involves methodologies that are difficult or expensive to scale up. Here the authors show how the production of nano-ZIF-8 can be conducted at the 1kg scale in an economical manner through the intermediate phase ZIF-L. The production of MOFs at large scale in a sustainable way is key if these materials are to be exploited for their promised widespread application. Much of the published literature has focused on demonstrations of preparation routes using difficult or expensive methodologies to scale. One such MOF is nano-zeolitic imidazolate framework-8 (ZIF-8) - a material of interest for a range of possible applications. Work presented here shows how the synthesis of ZIF-8 can be tracked by a range of methods including X-ray diffraction, thermo gravimetric analysis and inelastic neutron scattering - which offer the prospect of in-line monitoring of the synthesis reaction. Herein we disclose how the production of nano-ZIF-8 can be conducted at scale using the intermediate phase ZIF-L. By understanding the economics and demonstrating the production of 1 kg of nano-ZIF-8 at pilot scale we have shown how this once difficult to make material can be produced to specification in a scalable and cost-efficient fashion.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of ZIF-94 from Recycled Mother Liquors: Study of the Influence of Its Loading on Postcombustion CO2 Capture with Pebax Based Mixed Matrix Membranes

  • Hasan, M.R.
  • Paseta, Lorena
  • Malankowska, M.
  • Téllez, Carlos
  • Coronas, Joaquín
Global energy demand is met in large part, by burning of fossil fuels, which is causing global warming. Mixed matrix membranes (MMMs) with metal organic frameworks (MOFs) as fillers are an interesting alternative for capturing post combustion CO2 which would make the energy sector sustainable. This research is focused on the synthesis of MOF ZIF-94 from the recycling of its mother liquors and the incorporation of synthesized MOF into a Pebax MH 1657 for MMM fabrication. The pH and the temperature of ZIF-94 synthesis are modified and monitored and this results in various nanoparticle diameters (average particle size in the range of 41 ± 8–180 ± 73 nm). Incorporation of ZIF-94 significantly improves the performance of the bare Pebax MH 1657 membrane. The maximum CO2/N2 selectivity and CO2 permeability are obtained for 10 wt% ZIF-94 loading in 9 wt% (polymer concentration in 70/30 (v/v) ethanol/water solution) Pebax MH 1657 matrix being 36 ± 7 (71% increment compared to bare membrane) and 137 ± 31 Barrer (80% improvement), respectively. © 2021 The Authors. Advanced Sustainable Systems published by Wiley-VCH GmbH
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membranes in CO2 separation applications

  • Embaye, Alula Selomon
  • Martinez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Tellez, Carlos
  • Coronas, Joaqui´n
Poly(ether-block-amide) (PEBA, commercialized as Pebax) copolymer membranes show a highly promising platform for preparing high-performance membranes for CO2 capture from process streams containing CH4 and N2. Pebax combines high CO2 affinity with the desired mechanical strength for polymeric membranes thanks to its flexible polyether segment and hard polyamide block, respectively. Furthermore, researchers have been improving the performance of these membranes by preparing a thin Pebax selective layer on top of porous supports and by incorporating inorganic and organic nanofillers into the Pebax matrix to overcome the permeance-selectivity limit. The chemical and structural characteristics of Pebax membranes according to the different fabrication techniques and parameters are discussed first. Then, the recent developments in terms of both Pebax-based thin film composite and mixed matrix membranes are summarized. Finally, thermal and water stabilities of these membranes are addressed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres - Long-term experimental study

  • Perea-Cachero A.
  • Etxeberría-Benavides M.
  • David O.
  • Deacon A.
  • Johnson T.
  • Malankowska M.
  • Téllez C.
  • Coronas J.
Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H 2 /CO 2 pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H 2 /CO 2 selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H 2 /CO 2 separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H 2 permeance was in the 22-47 GPU range corresponding to 22-32 H 2 /CO 2 selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol. 237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sized-Controlled ZIF-8 Nanoparticle Synthesis from Recycled Mother Liquors: Environmental Impact Assessment

  • García-Palacín, Marta
  • Martínez, José Ignacio
  • Paseta, Lorena
  • Deacon, Adam
  • Johnson, Timothy
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
The effect of different deprotonators as well as washing steps and drying procedure on the synthesis of ZIF-8 from the mother liquor was investigated. The morphology, thermal stability, crystallinity, and surface area of the synthesized MOF were investigated. In addition, life-cycle assessment (LCA) or, in other words, eco-balance, was implemented as well. LCA compares the full range of environmental effects associated with the product by evaluating all inputs and outputs of material flows and predicting how such flow will affect the environment. ZIF-8 nanocrystals were synthesized from the recycled mother liquors using NaOH or NH4OH thus preserving the main characteristics of the ZIF-8 nanoparticles derived from the initial synthesis. The rest of the characterization methods confirmed the suitability of the synthesis methodology considering the phase purity of the obtained ZIF-8 and nanometer size particles. This procedure enabled us not only to obtain phase pure ZIF-8 but also to substantially decrease the amount of solvent used for washing making it a sustainable process.