Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanosheets of MIL-53(Al) applied in membranes with improved CO 2 /N 2 and CO 2 /CH 4 selectivities

  • Perea-Cachero, A.
  • Sánchez-Laínez, J.
  • Zornoza, B.
  • Romero-Pascual, E.
  • Téllez, C.
  • Coronas, J.
MIL-68(Al) and MIL-53(Al) are carboxylate-based metal-organic frameworks (MOFs) with the same chemical composition but different structures (polymorphs). In this study, MIL-53(Al) nanosheets of ca. 150 nm in size with an average thickness of 3.5 ± 0.9 nm were obtained after immersion of a sample composed of MIL-68(Al) and MIL-53(Al) in water under different conditions (ultrasound, stirring, reflux, 60 °C and room temperature). The disaggregated MIL-53(Al) nanosheets produced under more severe conditions were suspended in a PDMS solution and then deposited on asymmetric polyimide P84® supports under vacuum filtration to form supported mixed matrix membranes (MMMs). When applied to the separation of CO 2 /CH 4 and CO 2 /N 2 mixtures, the MMM with MIL-53(Al) nanosheets improved the CO 2 /CH 4 (28.4-28.7 vs. 22.4) and CO 2 /N 2 (19.9-23.2 vs. 17.5) selectivities of the conventional MIL-53(Al) MMM with higher CO 2 permeances (20.8-29.6 GPU vs. 9.5 GPU for CO 2 /CH 4 and 17.7-26.8 GPU vs. 11.2 GPU for CO 2 /N 2 ).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydrogen Separation at High Temperature with Dense and Asymmetric Membranes Based on PIM-EA(H2)-TB/PBI Blends

  • Sánchez-Laínez, J.
  • Zornoza, B.
  • Carta, M.
  • Malpass-Evans, R.
  • McKeown, N.B.
  • Téllez, C.
  • Coronas, J.
The preparation of dense and asymmetric flat membranes from the blending of polybenzimidazole (PBI) and (1.5-20 wt %) of a polymer of intrinsic microporosity (PIM-EA(H2)-TB) is reported. Thermal characterization validated the blend by revealing a single glass transition temperature, which suggests the absence of polymer phase segregation. In addition, the decomposition activation energy and d-spacing of the blends follow trends that correlate with the amount of PIM component. The membranes have been tested for the separation of H2/CO2 mixtures. The properties of the dense membranes, which also incorporate zeolitic imidazolate-8 (ZIF-8) nanoparticles, helped understanding of the behavior of the PIM/PBI blends by which phase inversion results in high separation performance asymmetric membranes. Asymmetric membranes show H2/CO2 selectivities of 23.8 (10/90 wt % PIM/PBI) and 19.4 (20/80 wt % PIM/PBI) together with respective H2 permeances of 57.9 and 83.5 GPU at 250 °C and 6 bar feed pressure. The gas separation performance of these asymmetric blends has been fitted to an empirical model, showing the influence of the amount of PIM and the feed pressure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solvent-Free Encapsulation at High Pressure with Carboxylate-Based MOFs

  • Monteagudo-Olivan, R.
  • Paseta, L.
  • Potier, G.
  • López-Ram-de-Viu, P.
  • Coronas, J.
The solvent-free encapsulation of caffeine and kojic acid was carried out in different carboxylate-based MOFs [MIL-53(Al), UiO-66 and Mg-MOF-74] by high pressure (0.32 GPa) contact. This methodology enables fast and ecofriendly encapsulation and gives rise to additive@MOFs with physical and features equivalent to those of materials obtained by common liquid phase encapsulation processes. It could be applied to other host–guest systems, simplifying the procedures, reducing the use and waste of harmful chemicals, and approaching the conditions of interest in the industry. The characterization carried out by thermogravimetry, X-ray diffraction, N2 adsorption, and 13C NMR provided information about the presence and conformation of the additives in the MOFs. The highest encapsulation values for caffeine (37 %) and kojic acid (32 %) were obtained with MIL-53(Al).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin supported MOF based mixed matrix membranes of Pebax® 1657 for biogas upgrade

  • Sánchez-Laínez, J.
  • Gracia-Guillén, I.
  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
This work shows the preparation of thin mixed matrix membranes (MMMs) with a 2-3 µm thick Pebax® 1657 layer on two different supports: a porous asymmetric polyimide P84® and dense polytrimethylsilylpropyne (PTMSP). Nanoparticles of metal-organic frameworks (MOFs) ZIF-8, MIL-101(Cr), UiO-66 and ZIF-7/8 core-shells were selected as fillers for the Pebax® 1657 based MMMs, all of them being MOFs with high CO2 adsorption capacity but different pore size distribution. All the membranes were characterized by SEM, FTIR, Raman, TGA and XRD analyses, showing in all cases a perfect compatibility of the Pebax® layer with both supports and also a good dispersion of the fillers in the polymeric matrix. These membranes were applied for the separation of equimolar CO2/CH4 mixtures at 35 °C under feed pressures between 3 and 5 bar, where an improvement in the gas separation performance with increasing pressure was noticed, thanks to the favored solubility of CO2. The synergistic compatibility between Pebax® 1657 and P84® gave rise to a 470% enhancement in CO2/CH4 selectivity, reaching a maximum value of 114 while the CO2 permeance increased by 40% up to 7.5 GPU. The addition of fillers in the Pebax® polymeric phase produced an improvement in the gas separation performance of the membranes, especially in terms of permeance, where the MMMs containing a 10 wt% loading of UiO-66 reached the optimum value of 11.5 GPU of CO2 (together with a CO2/CH4 selectivity of 55.6).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membrane for CO2/N-2 separation: the influence of the casting solution concentration on its morphology, thermal properties and gas separation performance

  • Martinez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Sanchez-Lainez, Javier
  • Tellez, Carlos
  • Coronas, Joaquín
The present work is focused on the study of the effect that the casting solution concentration has on the morphology and gas separation performance of poly(ether-block-amide) copolymer membranes (Pebax (R) MH 1657). With this aim, three different concentrations of Pebax (R) MH 1657 in the casting solution (1, 3 and 5 wt%) were used to prepare dense membranes with a thickness of 40 mu m. The morphology and thermal stability of all membranes were characterized by scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, rotational viscometry and thermogravimetric analyses. An increase in crystallinity was notable when the amount of solvent in the Pebax (R) MH 1657 solution was higher, mainly related to the polymer chains arrangement and the solvent evaporation time. Such characteristic seemed to play a key role in the thermal degradation of the membranes, confirming that the most crystalline materials tend to be thermally more stable than those with lower crystallinity. To study the influence of their morphology and operating temperature on the CO2 separation, gas separation tests were conducted with the gas mixture CO2/N-2. Results indicated that a compromise must be found between the amount of solvent used to prepare the membranes and the crystallinity, in order to reach the best gas separation performance. In this study, the best performance was achieved with the membrane prepared from a 3 wt% casting solution, reaching at 35 degrees C and under a feed pressure of 3 bar, a CO2 permeability of 110 Barrer and a CO2/N-2 selectivity of 36.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Covalent Triazine Framework CTF-1@Polysulfone Mixed Matrix Membranes and Their Gas Separation Studies

  • Dey, Subarna
  • Bügel, Stefanie
  • Sorribas, Sara
  • Nuhnen, Alexander
  • Bhunia, Asamanjoy
  • Coronas, Joaquín
  • Janiak, Christoph
Covalent triazine framework CTF-1 and polysulfone (PSF) are used to form mixed-matrix membranes (MMMs) with 8, 16, and 24 wt% of the porous filler material CTF-1. Studies on permeability and selectivity are carried out concerning the gases O2, N2, CO2, and CH4. CO2 permeability of the synthesized MMMs increases by 5.4 Barrer in comparison to the pure PSF membrane. The selectivity remains unchanged for O2/N2 and CO2/CH4 but was found to be increased for CO2/N2. Further, comparisons to theoretical models for permeability prediction yield a permeability for CTF-1 which is about six times higher than the permeability of PSF. The inverse of the sum of the free fractional volumes (FFV) of the polymer and the filler correlate linearly to the logarithm of the permeabilities of the gases which conversely indicates that the porosity of the filler contributes to the gas transport through the membrane.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

110th Anniversary: Polyamide/Metal-Organic Framework Bilayered Thin Film Composite Membranes for the Removal of Pharmaceutical Compounds from Water

  • Paseta, L.
  • Antorán, D.
  • Coronas, J.
  • Téllez, C.
Nanofiltration can be a useful tool to remove pharmaceuticals in water sources. The performance of the most used thin film composite (TFC) membranes, typically with a thin polyamide (PA) layer, can be improved using thin film nanocomposite (TFN) membranes obtained by the introduction of a filler within the PA layer. In this work, to control the positioning of the filler two kinds of PA/metal-organic framework (MOF) bilayered TFC (BTFC) membranes, PA/ZIF-93 and PA/HKUST-1, were synthesized onto polyimide supports. First, the interfacial synthesis was used for the preparation of a MOF layer, and second, a PA layer was synthesized by interfacial polymerization. These BTFC membranes were applied in the nanofiltration of diclofenac and naproxen aqueous solutions obtaining a maximum water permeance of 33.1 and 24.9 L·m -2 ·h -1 ·bar -1 , respectively, with a rejection of =98% when HKUST-1 was used. These permeance improvements (using diclofenac, 4.9 and 3.4 times the value of the TFC and TFN membranes, respectively) are related to the PA layer thickness, MOF porosity, membrane hydrophilicity, and membrane roughness.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards the dehydration of ethanol using pervaporation cross-linked poly (vinyl alcohol)/graphene oxide membranes

  • Castro-Muñoz, Roberto
  • Buera-Gonzalez, Juan
  • Iglesia, Óscar de la
  • Galiano, Francesco
  • Fila, Vlastimil
  • Malankowska, Magdalena
  • Rubio, César
  • Figoli, Alberto
  • Tellez, Carlos
  • Coronas, Joaquín
Highly hydrophilic inorganic material graphene oxide (GO) was successfully prepared and incorporated into a cross-linked poly(vinyl alcohol) (PVA) matrix. The obtained mixed matrix membranes (MMMs) have been used for the dehydration of ethanol (10: 90% water-ethanol) by pervaporation (PV), monitoring their performance in terms of total permeate flux, partial components fluxes, as well as their separation factor. The effect of filler was analyzed by doubling the GO content (at 0.5, 1.0, and 2.0 wt%) in the MMMs. A complete analysis of the operating temperature (between 40 and 70 degrees C) was carried out by means of Arrhenius relationship. Moreover, the membranes were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), measurements of degree of swelling (uptake), water contact angle (CA) and mechanical properties. At 40 degrees C, the best performance was provided by the MMMs containing 1 wt% GO, showing a separation factor of 263 and a permeate flux of about 0.137 kg m(-2) h(-1) (in which 0.133 kg m(-2) h(-1) corresponds to water). This represents a 75% enhancement of the original permeation rate of pristine cross-linked PVA membranes. Taking into account the promising results, it is likely that these MMMs will provide featured benefits in green processes, e.g. ethanol purification by means of less-energy consumption.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mathematical modeling of temperature and pressure effects on permeability, diffusivity and solubility in polymeric and mixed matrix membranes

  • Maghami, S.
  • Mehrabani-Zeinabad, A.
  • Sadeghi, M.
  • Sánchez-Laínez, J.
  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
Due to the temperature and pressure dependency of gas transport through polymeric and mixed matrix membranes, probing of their separation performance at different operational conditions seems crucial to determine an optimal operational condition. To minimize the number of costly and time consuming experiments, a modified form of van''t Hoff-Arrhenius model was developed to consider the simultaneous effects of temperature and pressure on the separation performance of polymeric and mixed matrix membranes. Moreover, the proposed model is capable to consider pressure dependency of energetic parameters of Arrhenius model including activation energies of permeability and diffusivity, heat of sorption and the corresponding pre-exponential factors. The validity of the proposed model was investigated by using permeation coefficients of CO 2 and N 2 in a binary mixture through 6FDA-DAM at different temperatures in the range of 35–55 °C and in the feed pressure range from 2 to 5 atm. Besides, from data taken from the literature, the proposed model was validated by the prediction of temperature and pressure dependency of transport properties of glassy and rubbery polymers as well as mixed matrix membranes (MMMs) for different gas molecules including He, H 2 , CO 2 , O 2 , N 2 , CH 4 and C 4 H 10 . Predictions corresponding to 300 data points revealed that the maximum average absolute relative error was 5.1%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Ultrathin permselective membranes: The latent way for efficient gas separation

  • Castro-Muñoz, Roberto
  • Agrawal, Kumar V.
  • Coronas, Joaquín
Membrane gas separation has attracted the attention of chemical engineers for the selective separation of gases. Among the different types of membranes used, ultrathin membranes are recognized to break the trade-off between selectivity and permeance to provide ultimate separation. Such success has been associated with the ultrathin nature of the selective layer as well as their defect-free structure. These membrane features can be obtained from specific membrane preparation procedures used, in which the intrinsic properties of different nanostructured materials (e.g., polymers, zeolites, covalent-organic frameworks, metal-organic frameworks, and graphene and its derivatives) also play a crucial role. It is likely that such a concept of membranes will be explored in the coming years. Therefore, the goal of this review study is to give the latest insights into the use of ultrathin selective barriers, highlighting and describing the primary membrane preparation protocols applied, such as atomic layer deposition, in situ crystal formation, interfacial polymerization, Langmuir-Blodgett technique, facile filtration process, and gutter layer formation, to mention just a few. For this, the most recent approaches are addressed, with particular emphasis on the most relevant results in separating gas molecules. A brief overview of the fundamentals for the application of the techniques is given. Finally, by reviewing the ongoing development works, the concluding remarks and future trends are also provided.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

The Effect of Hydrogen Peroxide on the synthesis of Terephthalate-Based metal-organic frameworks

  • Monteagudo-Olivan, Rebeca
  • Jiménez-Fernández, Isabel
  • López-Ram-de-Viu, Pilar
  • Sebastian, Víctor
  • Coronas, Joaquín
Metal-organic frameworks (MOFs) are versatile materials for applications in fields including the environment, energy and health. A synthetic route for improving the formation of MOFs has been developed and is triggered by hydrogen peroxide (H2O2) to promote the formation of terephthalate-based MOFs of MIL-53 and MIL-68 types, specifically those made from Fe3+ and Al3+ and mixtures of both. Different characterization techniques (TGA, XRD, SEM, TEM, N2 porosimetry and Raman, mass and NMR spectroscopies) gave insights into the effect of H2O2 on the MOF synthesis. The reaction yield was significantly improved (the highest yield being 74 % for MIL-53(Al)), while crystallinity and N2 adsorption properties were mostly maintained for phases based on Al and Al/Fe. Furthermore, a reaction mechanism was envisaged from the mass spectroscopic analysis of the reaction solutions, thus suggesting that H2O2 plays the role of a µ-hydroxo bridge promoter, favoring the link between terephthalate ligands and aluminum-containing species to give rise to the µ-carboxylate bridges, leading to a faster growth of the final MOF, and offering a novel MOF synthesis approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrathin Films of Porous Metal–Organic Polyhedra for Gas Separation

  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Sánchez-Laínez, Javier
  • Roubeau, Olivier
  • Coronas, Joaquín
  • Maspoch, Daniel
  • Gascón, Ignacio
Ultrathin films of a robust RhII-based porous metal–organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air–water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP-supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO2 permeance and CO2/N2 selectivity, demonstrating the great combined potential of MOP and Langmuir-based techniques in separation technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pebax® 1041 supported membranes with carbon nanotubes prepared: Via phase inversion for CO2/N2 separation

  • Sánchez-Laínez, Javier
  • Ballester-Catalán, Marcos
  • Javierre-Ortín, Enrique
  • Téllez, Carlos
  • Coronas, Joaquín
This work shows the preparation of Pebax® 1041 films from solutions in DMAc and water-DMAc emulsions as alternatives to those prepared by extrusion that can be found in the literature. These membranes were tested in post-combustion CO2 capture, in the separation of a 15/85 (v/v) CO2/N2 mixture. Self-supported membranes of Pebax® 1041 were prepared by solvent evaporation and phase inversion. The characterization of these films defined the intrinsic properties of this polymer in terms of chemical structure, crystallinity, thermal stability and gas separation performance (a CO2 permeability of 30 Barrer with a CO2/N2 selectivity of 21 at 35 °C and 3 bar feed pressure). Supported Pebax® 1041 membranes were also developed to decrease the Pebax® thickness (in the 1.5-10 µm range), resulting in a higher permeance. These membranes were prepared by a phase inversion process consisting of the precipitation of a Pebax® 1041/DMAc solution in water and dispersing it to form a stable emulsion that was drop-cast on PSF asymmetric supports. Once dried, the polymer formed a dense continuous layer. The phase inversion methodology is "greener" than solvent evaporation since dimethylacetamide is not released as toxic vapour during membrane preparation. The amount drop-cast led to a different selective layer thickness, which was enhanced by the dispersion of MWCNTs in the polymer emulsion. The properties of the Pebax® selective layer were studied by thermogravimetry and by measuring the contact angle of the membrane surface, and the optimal CO2/N2 selectivity (22.6) was obtained with a CO2 permeance of 3.0 GPU.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conversion of sugars to methyl lactate with exfoliated layered stannosilicate UZAR-S4

  • Murillo, B.
  • de la Iglesia, Ó.
  • Rubio, C.
  • Coronas, J.
  • Téllez, C.
Biomass has been shown as an alternative to fossil fuels for obtaining chemicals. In this work, the transformation of sugars into methyl lactate (ML) at 160 °C was carried out using the layered stannosilicate UZAR-S3 (University of Zaragoza-solid number 3) and the delaminated material UZAR-S4 (University of Zaragoza-solid number 4) obtained from its exfoliation. The exfoliation of UZAR-S3 to UZAR-S4 increased the accessibility of the compounds to the catalytic sites and the medium-strength acidity. Thus, the yield to ML for sucrose transformation increased from 8% for UZAR-S3 to 49.9 % for UZAR-S4. In the reusability tests, the UZAR-S4 catalyst was characterized before and after reaction by several techniques such as X-ray diffraction, thermogravimetry analysis, scanning electronic microscopy, energy dispersive X-ray spectroscopy and nitrogen adsorption. A deactivation of the catalyst was observed, which was related to carbonaceous deposits that decreased the specific surface area and the pore volume of the catalyst.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functionalized graphene-based polyamide thin film nanocomposite membranes for organic solvent nanofiltration

  • Paseta, L.
  • Luque-Alled, J.M.
  • Malankowska, M.
  • Navarro, M.
  • Gorgojo, P.
  • Coronas, J.
  • Téllez, C.
This work deals with the use of octadecylamine (ODA)-functionalized reduced graphene oxide (rGO) for thin film nanocomposite (TFN) membranes. The functionalization of rGO with ODA leads to graphene-based nanofillers, more hydrophobic than GO, and thus to the easier dispersion in the organic phase of the interfacial polymerization (IP) reaction carried out to produce polyamide (PA) TFN membranes. The performance of the new TFN membranes is evaluated by organic solvent nanofiltration (OSN) of alcoholic solutions containing dyes Acridine Orange (AO, MW 265 g·mol-1), Sunset Yellow (SY, MW 452 g·mol-1) and Rose Bengal (RB, MW 974 g·mol-1). The functionalized nature of the nanoparticles introduced into the hydrophilic PA layer allows an increase of the ethanol permeance from 2.8, 3.4 and 3.7 L·m-2·h-1·bar-1 for AO, SY and RB, respectively, corresponding to the bare thin film composite membrane (without rGO-ODA particles), to 4.3, 4.6 and 6.0 L·m-2·h-1·bar-1 for AO, SY and RB, respectively, for the rGO-ODA based TFN membrane. In fact, we hypothesize that the increase of the ethanol flux achieved with the use of rGO-ODA as a filler in TFN membranes is owing to a combination of the simultaneous presence of polar and non-polar groups from rGO-ODA nanosheets and the creation of still selective narrow gaps between these particles and the polyamide (PA).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of nanoparticles of zeolitic imidazolate framework ZIF-94 using inorganic deprotonators

  • Madhav, D.
  • Malankowska, M.
  • Coronas, J.
A novel synthesis process of ZIF-94 (also known as SIM-1) is developed for particle size tuning, using either NaOH or NH4OH as a deprotonator. ZIF-94 originate from MOFs and have several advantages over traditional porous materials, in terms of their chemistry, structure and applications as catalysts, adsorbents, biocides and membrane materials. The existing synthesis process for ZIF-94 at a scale-up level produces particles of approximately 250 nm in size; an even smaller size is expected to result in an even better gas separation performance and catalytic activity. In this study, it was found that NaOH results in ZIF-94 particles with well-defined crystal structures, while in the case of NH4OH, the particles agglomerate to produce random shaped bigger particles. The optimum base to metal ratio was found to be 2 : 1 (NaOH : Zn), which shows a compromise between the particle size (114 +/- 3 nm) and BET specific surface area (254 +/- 4 m(2) g(-1)). Furthermore, the synthesized nanoparticles underwent thorough characterization by XRD, TGA, N-2 adsorption and electron microscopy revealing the lowest SEM average particle size of 84 +/- 3 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green Preparation of Thin Films of Polybenzimidazole on Flat and Hollow Fiber Supports: Application to Hydrogen Separation

  • Sanchez-Lainez, J.
  • Etxeberria-Benavides, M.
  • David, O.
  • Tellez, C.
  • Coronas, J.
This work shows the preparation of thin films, with thickness from 70 nm to 1 mu m, of meta-polybenzimidazole (m-PBI) on polyimide P84 supports. Ethanolic solutions of m-PBI were used to coat flat and hollow fiber supports of asymmetric P84 with m-PBI in a process where the coating and drying was performed at room temperature. A solution of NaOH in EtOH allowed the dissolution of the m-PBI powder, providing the perfect coating solution to build thin films of m-PBI without damaging the polymeric support. It also meant a green alternative, avoiding the use of toxic solvents, such as dimethylacetamide. The resulting membranes have been tested for the separation of H-2 mixtures at high temperature at different setups to allow checking their reproducibility. With 100 nm thickness the membranes showed their best gas separation performance. For flat membranes at 180 degrees C and 3 bar feed pressure a H-2 permeance of 48.5 GPU was obtained, with respective H-2/CO2 and H-2/N-2 selectivities of 33.3 and 55.8. Besides, the hollow fibers under a feed pressure of 6 bar and tested at the same temperature showed near 90 GPU of H-2 with a H-2/CO2 selectivity of 13.5 in the one-fiber module and over 39 GPU of H-2 with a H-2/CO2 selectivity of 20.2 in the five-fiber module. Finally, the stability of the membranes was proved for 22 days at 180 degrees C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study on the recycling of zeolitic imidazolate frameworks and polymer Pebax® 1657 from their mixed matrix membranes applied to CO2 capture

  • Hasan, Md Rafiul
  • Moriones, Andoni
  • Malankowska, Magdalena
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) consisting of fillers (e.g. metal organic frameworks (MOFs)) in polymer matrix are considered as an interesting alternative for capturing post combustion CO2 towards a sustainable development. This research is focused on the recycling of MMMs made of polymer Pebax® 1657 and MOF ZIF-94. Upon MMM preparation, characterization and testing, MMMs were dissolved to recover polymer and MOFs separately. Recovered products were characterized by SEM, EDX, FTIR, TGA, XRD, DLS, mass spectrometry and N2 adsorption to compare their size, shape and other properties with those of fresh ones. Mean particle size of fresh and recycled ZIF-94 were 148 ± 44 nm and 164 ± 32 nm, respectively. Incorporation of recycled ZIF-94 in MMMs produced defect free membranes which was confirmed by SEM and gas separation measurements. These MMMs, with a 10 wt% ZIF-94 loading, were tested for the separation of the CO2/N2 mixture with a CO2 permeability of 157 ± 6.5 Barrer (with 67 % improvement compared to fresh pure polymer membrane with 94 ± 2 Barrer) and a CO2/N2 selectivity of 27.5 ± 1.4 (5 % lower than that of the fresh MMM, 29.3 ± 1.8, but 20 % higher than the corresponding to the pure polymer membrane, 23 ± 2). Demonstrating its wide feasibility, the proposed methodology was also applicable for recycling of ZIF-8 from Pebax® 1657 based MMMs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Greener processes in the preparation of thin film nanocomposite membranes with diverse metal-organic frameworks for organic solvent nanofiltration

  • Paseta, L.
  • Navarro, M.
  • Coronas, J.
  • Téllez, C.
The toxic solvent dimethylformamide has been replaced by the greener dimethylsulfoxide in the casting and activation processes for the preparation of thin film composite (TFC) membranes. This methodology has been validated with the use of MOFs ZIF-8, ZIF-93 and UiO-66 as fillers for thin-film nanocomposite (TFN) membranes. These membranes were successfully applied in the organic solvent nanofiltration of sunset yellow (SY) in methanol obtaining the highest permeance when UiO-66 and ZIF-93 were used with a value of 11 L m -2 h -1 bar -1 . The permeance improvements are related to the MOF porosity, polyamide-MOF layer thickness and the hydrophilic/hydrophobic character of the membrane. © 2019 The Korean Society of Industrial and Engineering Chemistry
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sized-Controlled ZIF-8 Nanoparticle Synthesis from Recycled Mother Liquors: Environmental Impact Assessment

  • García-Palacín, Marta
  • Martínez, José Ignacio
  • Paseta, Lorena
  • Deacon, Adam
  • Johnson, Timothy
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
The effect of different deprotonators as well as washing steps and drying procedure on the synthesis of ZIF-8 from the mother liquor was investigated. The morphology, thermal stability, crystallinity, and surface area of the synthesized MOF were investigated. In addition, life-cycle assessment (LCA) or, in other words, eco-balance, was implemented as well. LCA compares the full range of environmental effects associated with the product by evaluating all inputs and outputs of material flows and predicting how such flow will affect the environment. ZIF-8 nanocrystals were synthesized from the recycled mother liquors using NaOH or NH4OH thus preserving the main characteristics of the ZIF-8 nanoparticles derived from the initial synthesis. The rest of the characterization methods confirmed the suitability of the synthesis methodology considering the phase purity of the obtained ZIF-8 and nanometer size particles. This procedure enabled us not only to obtain phase pure ZIF-8 but also to substantially decrease the amount of solvent used for washing making it a sustainable process.