Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Towards high bandwidth communication systems: from Multi-Gbit/s over SI-POF in home scenarios to 5G cellular networks over SMF

  • Al-Zubaidi, Fahad Mohammed Abdulhusse
The main objective of the thesis is to study high bandwidth communication systems for different network architectures from the end user at the in-home scenario to the service provider through the mobile cellular front-haul network. This is in parallel with the integration of power over fiber (PoF) technology in these systems., The present work received funds from the following Spanish and international projects: - Spanish Ministerio de Ciencia, Innovación y Universidades, “Tecnologías avanzadas inteligentes basadas en fibras ópticas/Advanced SMART technologies based on Optical Fibers (SMART-OF)”, grant no. RTI2018-094669-B-C32, within the coordinated project “Polymer Optical Fiber Disruptive Technologies (POFTECH)”. - Spanish Ministerio de Ciencia, Innovación y Universidades “LAboratorio de montaje, medida y CAracterización de antenas y dispositivos integrados fotónicos para comunicaciones 5G y de espacio en milimétricas, submilimétricas y THz (hasta 320 GHz) (LACA5G))”, grant no. EQC2018-005152-P. - Comunidad de Madrid “TElealimentación FotovoLtaica por fibra Óptica para medida y coNtrol en entornos extremos (TEFLON-CM)”, grant no. Y2018/EMT-4892. - Comunidad de Madrid “Sensores e Instrumentación en Tecnologías Fotónicas 2 (SINFOTON-2)”, grant no. P2018/NMT-4326, coordinated project with UC3MUPM- UAH-URCJ-CSIC. - H2020 European Union programme Bluespace project “Building the Use of Spatial Multiplexing 5G Networks Infrastructures and Showcasing Advanced Technologies and Networking Capabilities” grant nº.762055., Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de Madrid, Presidente: Beatriz Ortega Tamarit.- Secretario: Guillermo Carpintero del Barrio.- Vocal: Óscar Esteban Martínez
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Enabling Vertical Industries Adoption of 5G Technologies: a Cartography of evolving solutions

  • Zafeiropoulos, Anastasios
  • Gouvas, Panagiotis
  • Fotopoulou, Eleni
  • Tsiolis, George
  • Xirofotos, Thanos
  • Bonnet, Jose
  • Carrozzo, Gino
  • Rizou, Stamatia
  • Gavras, Anastasius
  • Barros, Maria Joao
  • Costa-Pérez, Xavier
  • Prasad, Athul
  • Gramaglia, Marco
  • Tzanakaki, Anna
  • Simeonidou, Dimitra
  • Cosmas, John
  • Fallgren, Mikael
  • Muñoz, Raúl
  • Vilalta, Ricard
Proceeding of: 2018 European Conference on Networks and Communications (EuCNC), 5G network technologies are evolving in a tremendous pace, enhancing the potential for being adopted and exploited by vertical industries and serve advance networking requirements needs. Towards this direction, a set of 5G PPP projects are providing contributions for tackling aspects related to the overall lifecycle of 5G vertical applications design, development and deployment, including the activation and management of the appropriate network services. In this paper, a cartography of a set of novel solutionsfacilitating the adoption of 5G technologies by vertical industries ispresented, aiming at identifying set of challenges and relevantsolutions as well as potential synergies among the related projects., This work was supported by the European Commission through the 5G PPP Projects MATILDA (GA No. 761898), 5GTANGO (GA No. 761493), 5GCITY (GA No. 761508), 5GMEDIA (GA No. 761699), SLICENET (GA No. 761913), 5G-TRANSFORMER (GA No. 761536), 5G-Xcast (GA No. 761498), IoRL (GA No. 761992), 5G-PICTURE (GA No. 762057), 5G-MoNArch (GA No. 761445), 5GCAR (GA No. 761510), BlueSPACE (GA No. 762055).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Smart remote nodes fed by power over fiber in Internet of Things applications

  • López Cardona, Juan Dayron
  • Sánchez Montero, David Ricardo
  • Vázquez García, María Carmen
Smart IoT solutions integrated into power grid stations are important due to their high economic and social value. Power over fiber technology to remotely feeding sensors and control electronics is a good choice in these environments of high electromagnetic interference. A sensing system design for magnetic field monitoring, fire and temperature/presence detection, and remotely fed by optical means is discussed. This design includes two types of nodes, smart and passive. Smart remote nodes have an energy manager to provide power on demand. Asymmetric splitting is proposed to optimize power distribution. Some tests on remote node power consumption, feeding, sensing, and centralized monitoring in one type of those nodes are successfully performed and reported., This work was supported in part by the Spanish Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid and H2020 European Union Programme under Grants TEC2015-63826-C3-2-R and RTI2018-094669-B-C32, and Grant Y2018/EMT-4892 (TEFLON-CM), in part by FSE, and in part by 5G PPP Bluespace project under Grant nº 762055, respectively., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Optically powered radio-over-fiber systems in support of 5G cellular networks and IoT

  • Al-Zubaidi, Fahad M. A.
  • López Cardona, Juan Dayron
  • Sánchez Montero, David Ricardo
  • Vázquez García, María Carmen
We propose using power-over-fiber (PoF) in some part of future 5G cellular solutions based on radio access networks considering currently installed front-haul solutions with single mode fiber to optically power communication systems for 5G new radio (NR) data transmission. Simulations addressing design parameters are presented. Radio-over-fiber (RoF) transmission over single mode fiber (SMF) is experimentally implemented and tested for link lengths ranging from 100 m up to 10 km with injected PoF signals up to 2 W. 64QAM, 16QAM and QPSK data traffic of 100 MHz bandwidth are transmitted simultaneously with the PoF signal showing an EVM compliant with 5G NR standard, and up to 0.5 W for 256QAM. EVM of 4.3% is achieved with RF signal of 20 GHz and QPSK modulation format in coexistence with delivering 870 mW of optical power to a photovoltaic cell (PV) after 10 km-long SMF link. Using PoF technology to optically powering remote units and Internet-of-Things (IoT) solutions based on RoF links is also discussed., This work was supported in part by the Spanish Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid and H2020 European Union programme under Grants RTI2018-094669-B-C32, Y2018/EMT-4892, and 5G PPP Bluespace project grant n°.762055, respectively.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Power over Fiber in C-RAN with Low Power Sleep Mode Remote Nodes Using SMF

  • López Cardona, Juan Dayron
  • Altuna Pérez, Rubén
  • Sánchez Montero, David Ricardo
  • Vázquez García, María Carmen
Power over fiber (PoF) with sleep mode operation in centralized radio access networks (C-RAN) of low power Remote Radio Heads (RRH) helps to reduce power consumption. This proposal includes bundles of single mode optical fibers (SMF) as part of the 5G C-RAN front-haul solution for providing control on power consumption by selectively activating some parts of the RRH. We experimentally demonstrate a PoF system based on 14.43 km of SMF feed by 2.24 W giving 226 mW electrical power at the RRH for control, battery charge, load operation and communication purposes. A bidirectional control channel is integrated in the central office and the RRH for providing the capability of entering in sleep mode operation and to provide information about the status of the battery and sensing elements at RRH. The optical data uplink/downlink operates over separate optical fibers shared by various RRHs and achieves low power consumption below 33 mW with low data rates. The measured PV cells conversion efficiency is above 30%. The RRH has two sleep modes of operation with a minimum power consumption of 5.8 mW., 2021. This work was supported in part by the Spanish Ministerio de Ciencia, Innovación y Universidades, Madrid Government (Comunidad de Madrid-Spain) and H2020 European Union programme under Grants RTI2018-094669-B-C32, Y2018/EMT-4892, P2018/NMT-4326, and 5G PPP Bluespace Project Grant 762055, respectively
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Power-over-fiber in a 10 km long multicore fiber link within a 5G fronthaul scenario

  • López Cardona, Juan Dayron
  • Rommel, Simon
  • Grivas, Evangelos
  • Sánchez Montero, David Ricardo
  • Dubov, Mykhaylo
  • Kritharidis, Dimitrios
  • Tafur Monroy, Ildefonso
  • Vázquez García, María Carmen
We evaluate the impact of Power-over-Fiber (PoF) technology on the fronthaul of a 5G-NR network with an Analog-Radio-over-Fiber at 25.5 GHz on a 10 km long multicore fiber. The study in this Letter analyzes the bit error rate (BER) performance for different levels of energy transmitted by the PoF system. 133 mW of maximum optical power at reception is demonstrated showing negligible BER impact or data transmission BER improvement in a dedicated and shared scenario., Comunidad de Madrid (Y2018/EMT-4892); Ministerio de Ciencia, Innovación y Universidades (RTI2018-094669-B-C32); Horizon 2020 Framework Programme (762055).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Optically feeding 1.75 W with 100 m MMF in efficient C-RAN front-hauls with Sleep Modes

  • López Cardona, Juan Dayron
  • Contreras Lallana, Pedro
  • Altuna Pérez, Rubén
  • Fresno-Hernández, Alicia
  • Barreiro, Xabier
  • Vázquez García, María Carmen
Using bundles of multimode optical fibers (MMF) as part of the 5G centralized radio access networks front-haul solutions for optically powering of low power consumption Remote Radio Heads (RRH) is proposed and experimentally demonstrated with 100 m of 200 mum core diameter MMF. From the 34.85 W electrical power provided to the system, 1.748 W are delivered to the load, giving an overall 5% efficiency, being the temperature controller of the High Power Lasers the most critical element. If intermediates results are considered, the efficiency from input optical power to electrical power after the PV cells is 43.4%. The RRH manages 2.34 W for control, battery charge, communications and the load operation. The system includes a low power bidirectional control channel that provides the capability of enabling different sleep modes and sending information about the status of the battery and sensing elements at RRH. The RRH has a minimum power consumption of 3.15 mW. Optimized design of different elements of the system are included. The system is tested by feeding a RF power amplifier at the RRH; providing a stable power supply and EVM performance below 17.8% with QPSK on a 20 GHz RF carrier., This work was supported in part by the Spanish Ministerio de Ciencia, Innovación y Universidades, Madrid Government (Comunidad de Madrid-Spain) and H2020 European Union programme under Grants RTI2018-094669-B-C32 and Y2018/EMT-4892, in part by Multiannual Agreement with UC3M in the line of Excellence of University Professors under Grant EPUC3M26, and in part by the context of the V PRICIT (Regional Programme of Research and Technological Innovation) and 5G PPP Bluespace project under Grant n°.762055, respectively., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

5G New Radio Fronthaul Network Design for eCPRI-IEEE 802.1CM and Extreme Latency Percentiles

  • Otero Pérez, Gabriel
  • Larrabeiti López, David
  • Hernández Gutiérrez, José Alberto
Packet-switched fronthaul networks are often designed following the rule that the worst-case network delay must be below a given target end-to-end network latency budget. However, the theoretical maximum delay can be too pessimistic in particular scenarios, where the latency budget needs to be a very small or there is a need to stretch the distance between the radio heads and the baseband units. In this paper, we propose to use a very high packet delay percentiles as an alternative to the maximum theoretical delay in order to stretch the range of the fronthaul links at the expense of a higher frame loss ratio (FLR), within the limits established by eCPRI and the IEEE 802.1 CM. Several methods to estimate the percentiles for the I U /II D eCPRI functional splits are analyzed. Namely, G/G/1 and N*D/D/1 queueing models are tested and compared with simulation as dimensioning tools. The results support that the N*D/D/1 queue is able to model the behavior of a packet-switch fronthaul aggregator using the eCPRI standard for 5g New Radio (NR) Fronthaul streams and can be used as a tool to dimension the length of the links. The experiments show that the fronthaul links' lengths can be increased by 60% and 10% for 50- and 100-MHz NR channels, respectively, while keeping the latency budget and frame loss ratio within the IEEE 802.1 CM limits., This work was supported in part by the Spanish National TEXEO Project under Grant TEC2016-80339-R and in part by the H2020 EU-Funded BlueSpace Project under Grant 762055. The work of G. Otero Pérez was supported by the Spanish Ministry of Education, Culture and Sport through the FPU Grant under Grant FPU16/01760. The work of G. Otero Pérez was supported by the Spanish Ministry of Education, Culture and Sport by means of the FPU under Grant FPU16/01760., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Fronthaul network modeling and dimensioning meeting ultra-low latency requirements for 5G

  • Otero Pérez, Gabriel
  • Hernández Gutiérrez, José Alberto
  • Larrabeiti López, David
Enabling the transport of fronthaul traffic in next-generation cellular networks [fifth-generation (5G)] following the cloud radio access network (C-RAN) architecture requires a redesign of the fronthaul network featuring high capacity and ultra-low latency. With the aim of leveraging statistical multiplexing gains, infrastructure reuse, and, ultimately, cost reduction, the research community is focusing on Ethernet-based packet-switch networks. To this end, we propose using the high queuing delay percentiles of the G/G/1 queuing model as the key metric in fronthaul network dimensioning. Simulations reveal that Kingman's exponential law of congestion provides accurate estimates on such delays for the particular case of aggregating a number of evolved Common Public Radio Interface fronthaul flows, namely functional splits Iu and IID. We conclude that conventional 10 G, 40 G, and 100 G transponders can cope with multiple legacy 10-20 MHz radio channels with worst-case delay guarantees. Conversely, scaling to 40 and 100 MHz channels will require the introduction of 200G, 400G, and even 1T high-speed transponders., The authors would like to acknowledge the support of the Spanish project TEXEO (grant no. TEC2016-80339-R), and the H2020 EU-funded project BlueSPACE (grant no. 762055).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Remote optical powering using fiber optics in hazardous environments

  • López Cardona, Juan Dayron
  • Vázquez García, María Carmen
  • Sánchez Montero, David Ricardo
  • Contreras Lallana, Pedro
Potential niches for a power-over-fiber (PoF) technique can be found in hazardous areas that require controlling unauthorized access to risk areas and integration of multiple sensors, in scenarios avoiding electromagnetic interference, and the presence of ignition factors. This paper develops a PoF system that provides galvanic isolation between two ends of a fiber for remotely powering a proximity sensor as a proof of concept of the proposed technology. We analyze scalability issues for remotely powering multiple sensors in a specific application for the hazardous environment. The maximum number of remote sensors that can be optically powered and the limiting factors are also studied; considering different types of multimode optical fibers, span lengths, and wavelengths. We finally address the fiber mode field diameter effect as a factor that limits the maximum power to be injected into the fiber. This analysis shows the advantages of using step-index versus graded-index fibers., This work was supported in part by the Spanish Ministerio de Economía, Industria y Competitividad, Comunidad de Madrid and H2020 European Union Programme under Grants TEC2015-63826-C3-2-R and S2013/MIT-2790, in part by FSE, and in part by 5G PPP BlueSpace Project under Grant 762055., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Decentralized Coordination of Converged Tactile Internet and MEC services in H-CRAN Fiber Wireless Networks

  • Otero Pérez, Gabriel
  • Ebrahimzadeh, Amin
  • Maier, Martin
  • Hernández Gutiérrez, José Alberto
  • Larrabeiti López, David
  • Fernández Veiga, Manuel
In order to meet the requirements of services and applications envisioned for post-5G and 6G networks, research efforts are heading towards the convergence of architectures aiming to support the wide variety of new compute-demanding and latency-sensitive applications in the context of Tactile Internet. In this article, we study the resource allocation and association of users with different delay requirements in a shared-backhaul fiber-wireless (FiWi) enhanced Heterogeneous Cloud Radio Access Network (h-cran) with Multi-access Edge Computing (mec) and offloading. As opposed to traditional resource and association management, we propose a decentralized algorithm based on a full dual decomposition of the optimization problem to operate the network. Results show that this approach outperforms the traditional one in terms of average delay and energy consumption, achieving up to 80% average delay improvement in high-load scenarios., Gabriel Otero Perez would like to acknowledge the support of the Spanish Ministry of Education, Culture and Sport by means of the FPU grant he holds (Grant No. FPU16/01760). Universidad Carlos III de Madrid would like to acknowledge the support of EU projects PASSION (grant no. 780326) and BlueSpace (Grant No. 762055), and the Spanish project TEXEO (grant no. TEC2016-80339-R). Martin Maier acknowledges the support of the U. Carlos III de Madrid - Banco de Santander Excellence Chair programme.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Design and analysis of ultra-low latency fronthaul and backhaul networks for 5G

  • Otero Pérez, Gabriel
Mención Internacional en el título de doctor, Conventional communications between human mobile users are not the only type of activities envisioned for post-5G and future 6G networks. Traditional Human-to- Human (H2H) communications are now joined by Human-to-Machine (H2M), and Machine-to-Machine (M2M) communications, in a Tactile Internet world. 6G is expected to put an end to smartphone-centric era, introducing new system paradigms. New services and applications such as telepresence, remote control of haptic machines, online schools/working, remote surgery, Multi-access Edge Computing (MEC) are envisioned to be part of the future daily life. Cloud-based services (including the cloud-based signal processing of radio waveforms), video traffic, enterprise applications, and virtualization have led to a rise of the traffic demand in metropolitan areas. Traditional cellular architectures are becoming exhausted and unable to cope with the requested performance and new approaches such as the Cloud Radio Access Networks (C-RAN) appear as natural replacements. This technology suggests the separation between the radio and the processing equipment that now will be located at different places of the network. However, all the implementation details about how to meet the bandwidth, latency, jitter or even how to measure these parameters remain open. In this thesis, we firstly assess real world traditional deployments for C-RAN like ring-star topologies implemented with Ethernet switching equipment. We derive the theoretical expressions for the propagation and queueing delays, assuming G/G/1 queueing models. Furthermore, the properties of the fronthaul streams are examined, particularly regarding the aggregation of functional Split B flows in the same fronthaul network. Additionally, the G/G/1 queueing model is further extended with the Kingman’s Exponential Law of Congestion, paying special attention to the percentile values of the queueing delay. High queueing delay percentiles are proposed as the key metric for the fronthaul network dimensioning. Namely, the aggregation of eCPRI flows (Splits IU and IID) in a packet aggregator is explored for different values of the radio channel’s bandwidth. The use of extreme latency percentiles is later explored as a useful tool for the design of fronthaul networks. The G/G/1 and N*D/D/1 queueing models are tested as modeling tools and compared with simulation to assess the tightness of their predictions in the extreme latency percentiles scenarios. The results support that the N*D/D/1 queue is able to model the behavior of a packet-switch fronthaul aggregator using the eCPRI standard for 5G New Radio (NR) fronthaul streams in a more accurate way and can be used as a tool to dimension the length of the links. This better modeling of the fronthaul translates into a finer implementation of C-RAN. By interpreting the gap betweenthis estimation and maximum worst-case delay as an extra delay budget, the fronthaul links’ lengths can be increased by 60% and 10% for 50 MHz and 100 MHz NR channels, respectively, while keeping the latency budget and frame loss ratio within the IEEE 802.1CM limits. Recent research efforts focus on the development of new photonic technologies, enabling capacities of Tb/s for the metropolitan area network. Sliceable Bandwidth Variable Transceivers (S-BVTs) appear as a promising technology to achieve this goal. The newadvancements in S-BVTs suggest that it is a cost-effective, flexible, and highperformance technology to improve metropolitan networks. In this thesis, we show their advantages over fixed transceivers in edge computing and content delivery network scenarios. Particularly, this work studies the dimensioning of edge data center resources from the perspective of achieving the blocking probabilities as low as 10[elevado a -6]. Two different scenarios are analyzed: the overflow over a paired samelevel data centers and the overflow over a centralized site. The results show that a proper distribution of computing resources in the centralized overflow approach can outperform the costs of a distributed strategy, requiring fewer processors and much smaller data centers at the central office. Moreover, different strategies to implement cost-effective CDN caching are presented. Fixed and bandwidth variable solutions are proposed and compared against each other in three different topologies, from the perspective of availability. Those solutions that make us of S-BVTs show many advantages in terms of scalability, low wavelength occupancy, and the reduced number of IT resources needed to support the same availability. Finally, this thesis addresses the characterization of the fronthaul traffic so that we may support its coexistence with other types of traffic and services. A Heterogeneous Cloud Radio Access Network (H-CRAN) serves as the reference network comprising all the envisioned traffic types, services, and data rates. A network simulator and its building blocks are described and presented as the tool to assess the performance of the proposed solution. This description includes the basics and the building blocks of the simulator (channel and interference models) as well as the definition of many concepts such as the heterogeneous networks, the construction of the coverage maps, the uplink and downlink decoupling, etc. A global optimization problem is proposed for the entire network, supporting three access technologies: LTE-A, WiFi, and C-RAN. A distributed and scalable operation method is proposed to orchestrate all the above components and to enable a seamless and flexible operation. The distributed algorithm is computationally simple as it only requires broadcasting the Lagrange multipliers that arise while solving the optimization problem. These, work as a sort of price indicator, transmitting information about the state and needs of base stations and users at any particular time. This solution is able to organize the user association and network resources in the appropriate way so as to comply with the delay requirements of each traffic type. As a desirable side effect, the energy consumption of the mobile nodes is also optimized., This work was supported in part by the Spanish Ministry of Education and Vocational Training under the FPU Grant number FPU16/01760, in part by the Spanish National TEXEO Project under Grant TEC2016-80339-R, in part by the H2020 EU-Funded BlueSpace Project under Grant 762055., Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de Madrid, Presidente: Luca Valcarenghi.- Secretario: Ángel Cuevas Rumín.- Vocal: Ramón Durán Barroso
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Multicore fiber scenarios supporting power over fiber in radio over fiber systems

  • Vázquez García, María Carmen
  • López Cardona, Juan Dayron
  • Contreras Lallana, Pedro
  • Sánchez Montero, David Ricardo
  • Pérez Prieto, Sandra
  • Pérez Garcilópez, Antonia Isabel
We propose the integration of power over fiber in the next generation 5G radio access network front-haul solutions based on spatial division multiplexing with multicore fibers. The different architectures in both shared- and dedicated- core scenarios for power over fiber delivery and data signals are described. The maximum power to be delivered depending on the efficiencies of the different components is addressed as well as the limits of the delivered energy to avoid fiber fuse and non-linear effects. It is shown how those limits depend on high power laser linewidth, fiber attenuation, link length and fiber core effective area. The impairments related to non-linear effects, multicore fiber crosstalk and temperature are also theoretically analyzed. Experiments show there is no degradation of signal quality for feeding powers of several hundreds of milliwatts for both scenarios in 4-core multicore fibers. This study helps in designing future power by light delivery solutions in Radio over Fiber systems with multicore fibers., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities, Directorate for Research and Innovation at Madrid region, and H2020 European Union programme under Grant RTI2018-094669-B-C32 and Grant Y2018/EMT-4892, and in part by FSE and 5G PPP Bluespace project Grant 762055.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

SI-POF supporting power-over-fiber in multi-Gbit/s transmission for in-home networks

  • Al Zubaidi, Fahad Mohammed Abdulhusse
  • Sánchez Montero, David Ricardo
  • Vázquez García, María Carmen
We propose the integration of power-over-fiber (PoF) in home networks with multi Gbit/s data transmission based on wavelength-division-multiplexing (WDM) in step-index plastic optical fibers (SI-POF). Different powering architectures are described. The efficiencies of different components are discussed to address the maximum remote energy that can be delivered. Experimental results show the ability of the system to deliver several mW of optical power with negligible data signal quality degradation and with BER of 1 × 10¿10. The potential of utilizing PoF in combination with low-loss WDM-POF to optically powering multiple devices for specific in-home applications and IoT ecosystems is discussed. A PoF scalability analysis is detailed., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities under Grant RTI2018-094669-B-C3; in part by the Directorate for Research and Innovation at Madrid region under Grant Y2018/EMT-4892; and in part by the H2020 European Union 5G PPP Bluespace project under Grant n°.762055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Demonstration of Extended 5G Digital Fronthaul Over a Partially-Disaggregated WDM/SDM Network

  • Fabrega, Josep M.
  • Múñoz, Raúl
  • Nadal, Laia
  • Manso, Carlos
  • Svaluto Moreolo, Michela
  • Vilalta, Ricard
  • Martínez, Ricardo
  • Vílchez, Francisco Javier
  • Pérez-Galacho, Diego
  • Grivas, Evangelos
  • Turkiewicz, Jaroslaw P.
  • Rommel, Simon
  • Tafur Monroy, Idelfonso
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We experimentally demonstrate a 5G digital fronthaul network that relies on multi-adaptive bandwidth/bitrate variable transceivers (BVTs) and an autonomic software-defined networking (SDN) control system for partially-disaggregated wavelength division multiplexing (WDM)/space division multiplexing (SDM). Transmission of 256-QAM 760.32 MHz orthogonal frequency-division multiplexing (OFDM) radio signal is performed, with a total radio transmission capacity of 5.667 Gb/s. Digitized signal samples are carried as a 22.25 Gb/s digitized radio-over-fiber (DRoF) data stream and transmitted over a WDM/SDM infrastructure including 40-wavelength 100-GHz arrayed waveguide gratings (AWGs) and 19-core fiber. The autonomic SDN controller deploys a control loop for the multi-adaptive OFDM-based BVTs that monitors the per-subcarrier signal to noise ratio (SNR) and assigns the optimal constellation based on the actual signal degradation. An error vector magnitude (EVM) below the targeted 2.1% is achieved while setting up connections in less than 5 s., This work was supported in part by the EC H2020 BLUESPACE Project under Grant 762055 and in part by the Spanish MICINN AURORAS Project under Grant RTI2018-099178.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transition technologies towards 6G networks

  • Raddo, Thiago R.
  • Rommel, Simon
  • Cimoli, Bruno
  • Vagionas, Chris
  • Pérez-Galacho, Diego
  • Pikasis, Evangelos
  • Grivas, Evangelos
  • Ntontin, Konstantinos
  • Katsikis, Michael
  • Kritharidis, Dimitrios
  • Ruggeri, Eugenio
  • Spaleniak, Izabela
  • Dubov, Mykhaylo
  • Klonidis, Dimitrios
  • Kalfas, George
  • Pleros, Nikos
  • Tafur Monroy, Idelfonso
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The sixth generation (6G) mobile systems will create new markets, services, and industries making possible a plethora of new opportunities and solutions. Commercially successful rollouts will involve scaling enabling technologies, such as cloud radio access networks, virtualization, and artificial intelligence. This paper addresses the principal technologies in the transition towards next generation mobile networks. The convergence of 6G key-performance indicators along with evaluation methodologies and use cases are also addressed. Free-space optics, Terahertz systems, photonic integrated circuits, softwarization, massive multiple-input multiple-output signaling, and multi-core fibers, are among the technologies identified and discussed. Finally, some of these technologies are showcased in an experimental demonstration of a mobile fronthaul system based on millimeter 5G NR OFDM signaling compliant with 3GPP Rel. 15. The signals are generated by a bespoke 5G baseband unit and transmitted through both a 10 km prototype multi-core fiber and 4 m wireless V-band link using a pair of directional 60 GHz antennas with 10 degrees beamwidth. Results shown that the 5G and beyond fronthaul system can successfully transmit signals with both wide bandwidth (up to 800 MHz) and fully centralized signal processing. As a result, this system can support large capacity and accommodate several simultaneous users as a key candidate for next generation mobile networks. Thus, these technologies will be needed for fully integrated, heterogeneous solutions to benefit from hardware commoditization and softwarization. They will ensure the ultimate user experience, while also anticipating the quality-of-service demands that future applications and services will put on 6G networks., This work was partially funded by the blueSPACE and 5G-PHOS 5G-PPP phase 2 projects, which have received funding from the European Union's Horizon 2020 programme under Grant Agreements Number 762055 and 761989. D. PerezGalacho acknowledges the funding of the Spanish Science Ministry through the Juan de la Cierva programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Capacity 5G Fronthaul Networks Based on Optical Space Division Multiplexing

  • Rommel, Simon
  • Pérez-Galacho, Diego
  • Fabrega, Josep Maria
  • Múñoz, Raúl
  • Tafur Monroy, Idelfonso
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The introduction of 5G mobile networks, bringing multi-Gbit/s user data rates and reduced latency, opens new opportunities for media generation, transport and distribution, as well as for new immersive media applications. The expected use of millimeter-wave carriers and the strong network densification resulting from a much reduced cell size¿which enable the expected performance of 5G¿pose major challenges to the fronthaul network. Space division multiplexing (SDM) in the optical domain has been suggested for ultra-high capacity fronthaul networks that naturally support different classes of fronthaul traffic and further enable the use of analog radio-over-fiber and advanced technologies, such as optical beamforming. This paper discusses the introduction of SDM with multi-core fibers in the fronthaul network as suggested by the blueSPACE project, regarding both digitized and analog radio-over-fiber fronthaul transport as well as the introduction of optical beamforming for high-capacity millimeter-wave radio access. Analog and digitized radio-over-fiber are discussed in a scenario featuring parallel fronthaul for different radio access technologies, showcasing their differences and potential when combined with SDM, This work was supported in part by the blueSPACE Project which has received funding from the European Union's Horizon2020 Research and Innovation Programme under Grant 762055. Parts of this paper have been published in the proceedings of the IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB) 2018, Valencia, Spain.