Pasar al contenido principal

REDES OPTICAS DESAGREGADAS Y AUTONOMICAS APROVECHANDO TECNOLOGIAS FOTONICAS Y COMPUTACION EN EL BORDE

RTI2018-099178-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE TECNOLOGIC DE TELECOMUNICACIONS DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Demonstration of Extended 5G Digital Fronthaul Over a Partially-Disaggregated WDM/SDM Network

  • Fabrega, Josep M.
  • Múñoz, Raúl
  • Nadal, Laia
  • Manso, Carlos
  • Svaluto Moreolo, Michela
  • Vilalta, Ricard
  • Martínez, Ricardo
  • Vílchez, Francisco Javier
  • Pérez-Galacho, Diego
  • Grivas, Evangelos
  • Turkiewicz, Jaroslaw P.
  • Rommel, Simon
  • Tafur Monroy, Idelfonso
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We experimentally demonstrate a 5G digital fronthaul network that relies on multi-adaptive bandwidth/bitrate variable transceivers (BVTs) and an autonomic software-defined networking (SDN) control system for partially-disaggregated wavelength division multiplexing (WDM)/space division multiplexing (SDM). Transmission of 256-QAM 760.32 MHz orthogonal frequency-division multiplexing (OFDM) radio signal is performed, with a total radio transmission capacity of 5.667 Gb/s. Digitized signal samples are carried as a 22.25 Gb/s digitized radio-over-fiber (DRoF) data stream and transmitted over a WDM/SDM infrastructure including 40-wavelength 100-GHz arrayed waveguide gratings (AWGs) and 19-core fiber. The autonomic SDN controller deploys a control loop for the multi-adaptive OFDM-based BVTs that monitors the per-subcarrier signal to noise ratio (SNR) and assigns the optimal constellation based on the actual signal degradation. An error vector magnitude (EVM) below the targeted 2.1% is achieved while setting up connections in less than 5 s., This work was supported in part by the EC H2020 BLUESPACE Project under Grant 762055 and in part by the Spanish MICINN AURORAS Project under Grant RTI2018-099178.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Design and assessment of FM-MCFs-suited SDM-ROADMs with versatile spatial group configurations and unified QoT estimator

  • Rumipamba Zambrano, Rubén Darío
  • Muñoz González, Raül
  • Casellas Regi, Ramon
  • Perelló Muntan, Jordi|||0000-0001-6563-2664
  • Spadaro, Salvatore|||0000-0002-4100-1726
  • Elfiqi, Abdulaziz E.
In this article, we focus on the design of different node architectures suitable for few-mode multi-core fibers (FMMCFs) based networks. Both dimensions, core and mode, open different possible ways to group spatial channels depending on the physical impairments of the space-division multiplexed (SDM) optical fibers. Moreover, the channel switching across a group of cores/modes at once and the end-to-end routing are not only mandatory aspects for certain spatial channels, but also recommendable in order to reduce the node complexity/cost. Thus, we propose various SDM-capable node architectures based on versatile and homogeneous spatial group configurations. Then, a unified physical-layer-aware Quality of Transmission (QoT) estimator is formulated to not only evaluate these node architectures in a simulation tool, but also validate them in a real experimental environment using a stateful path computation element (PCE) as a central controller. The obtained results disclose that the cost-efficient node design parameter, namely, the size of the spatial group G, depends on both the network and traffic profile size. Specifically, for a national optical backbone network equipped with a homogeneous and hexagonally arranged 6-weakly-coupled modes and 7-weakly-coupled cores fibers, G equals 6, while for a continental backbone network, G can raise up to 14. In any case, we demonstrate that the cost-benefit tradeoff in node design must be analyzed in detail in order to meet the huge traffic volumes of the next years., This work was supported by the Spanish Project AURORAS under Grant RTI2018-099178-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data plane elements for optical performance monitoring agnostic to the modulation format for disaggregated optical networks

  • Fàbrega Sánchez, Josep Maria
  • Locatelli, Fabiano|||0000-0002-2971-1303
  • Nadal Reixats, Laia
  • Christodoulopoulos, Konstantinos
  • Svaluto Moreolo, Michela
  • Spadaro, Salvatore|||0000-0002-4100-1726
In this paper, data plane alternatives for optical performance monitoring are presented as enablers to address the key challenges in disaggregated optical networks. In fact, a key element of the disaggregated networks is optical performance monitoring that is expected to deliver the feedback needed by the control plane to guarantee end-to-end quality of transmission and quality of service. Therefore, we will discuss data plane elements for non-intrusive monitoring agnostic to the modulation format, proposing and analyzing different schemes. Furthermore, we will also review the relevant figures of merit to be delivered to the /SDN/ control, orchestration and management planes and their potential impact on the network performance., This work was supported by the Spanish MINECO project AURORAS (RTI2018-099178-B-I00) and EU-H2020 project ONFIRE (G.A. 765275)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Peer-to-Peer blockchain-based NFV service platform for End-to-End network slice orchestration across multiple NFVI domains

  • Alemany Prats, Pol
  • Vilalta Cañellas, Ricard
  • Muñoz González, Raül
  • Casellas, Ramon
  • Martínez, Ricardo
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a non-hierarchical architecture to deploy End-to-End Network Slices in a multi-domain network using an Ethereum-based Blockchain to manage the Network Slicing requests across domains. The use of Blockchain aims to look towards a collaboration vision to deploy Networks Slices using the resources to deploy them as if they would be placed under the domain of the Network Slice requester. The authors describe a possible instantiation procedure and they present results showing how much the use of Blockchain might increase the deployment time of an End-to-End Network Slice., Work partially funded by the EC through the 5GPPP INSPIRE-5GPlus (871808) and MINECO AURORAS (RTI 2018-099178-B-I00) projects, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Peer-to-Peer blockchain-based NFV service platform for End-to-End network slice orchestration across multiple NFVI domains

  • Alemany Prats, Pol
  • Vilalta Cañellas, Ricard
  • Muñoz González, Raül
  • Casellas, Ramon
  • Martínez, Ricardo
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a non-hierarchical architecture to deploy End-to-End Network Slices in a multi-domain network using an Ethereum-based Blockchain to manage the Network Slicing requests across domains. The use of Blockchain aims to look towards a collaboration vision to deploy Networks Slices using the resources to deploy them as if they would be placed under the domain of the Network Slice requester. The authors describe a possible instantiation procedure and they present results showing how much the use of Blockchain might increase the deployment time of an End-to-End Network Slice., Work partially funded by the EC through the 5GPPP INSPIRE-5GPlus (871808) and MINECO AURORAS (RTI 2018-099178-B-I00) projects, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Data plane elements for optical performance monitoring agnostic to the modulation format for disaggregated optical networks

  • Fàbrega Sánchez, Josep Maria
  • Locatelli, Fabiano
  • Nadal Reixats, Laia
  • Christodoulopoulos, Konstantinos
  • Svaluto Moreolo, Michela
  • Spadaro, Salvatore
In this paper, data plane alternatives for optical performance monitoring are presented as enablers to address the key challenges in disaggregated optical networks. In fact, a key element of the disaggregated networks is optical performance monitoring that is expected to deliver the feedback needed by the control plane to guarantee end-to-end quality of transmission and quality of service. Therefore, we will discuss data plane elements for non-intrusive monitoring agnostic to the modulation format, proposing and analyzing different schemes. Furthermore, we will also review the relevant figures of merit to be delivered to the /SDN/ control, orchestration and management planes and their potential impact on the network performance., This work was supported by the Spanish MINECO project AURORAS (RTI2018-099178-B-I00) and EU-H2020 project ONFIRE (G.A. 765275)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design and assessment of FM-MCFs-suited SDM-ROADMs with versatile spatial group configurations and unified QoT estimator

  • Rumipamba Zambrano, Rubén Darío
  • Muñoz González, Raül
  • Casellas Regi, Ramon
  • Perelló Muntan, Jordi
  • Spadaro, Salvatore
  • Elfiqi, Abdulaziz E.
In this article, we focus on the design of different node architectures suitable for few-mode multi-core fibers (FMMCFs) based networks. Both dimensions, core and mode, open different possible ways to group spatial channels depending on the physical impairments of the space-division multiplexed (SDM) optical fibers. Moreover, the channel switching across a group of cores/modes at once and the end-to-end routing are not only mandatory aspects for certain spatial channels, but also recommendable in order to reduce the node complexity/cost. Thus, we propose various SDM-capable node architectures based on versatile and homogeneous spatial group configurations. Then, a unified physical-layer-aware Quality of Transmission (QoT) estimator is formulated to not only evaluate these node architectures in a simulation tool, but also validate them in a real experimental environment using a stateful path computation element (PCE) as a central controller. The obtained results disclose that the cost-efficient node design parameter, namely, the size of the spatial group G, depends on both the network and traffic profile size. Specifically, for a national optical backbone network equipped with a homogeneous and hexagonally arranged 6-weakly-coupled modes and 7-weakly-coupled cores fibers, G equals 6, while for a continental backbone network, G can raise up to 14. In any case, we demonstrate that the cost-benefit tradeoff in node design must be analyzed in detail in order to meet the huge traffic volumes of the next years., This work was supported by the Spanish Project AURORAS under Grant RTI2018-099178-B-I00., Peer Reviewed, Postprint (author's final draft)