Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Towards reconfigurable accelerators in HPC: Designing a multipurpose eFPGA tile for heterogeneous SoCs

  • Hotfilter, Tim
  • Kreß, Fabian
  • Kempf, Fabian
  • Becker, Jürgen
  • De Haro Ruiz, Juan Miguel|||0000-0002-7427-9118
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Moretó Planas, Miquel|||0000-0002-9848-8758
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Baili, Imen
The goal of modern high performance computing platforms is to combine low power consumption and high throughput. Within the European Processor Initiative (EPI), such an SoC platform to meet the novel exascale requirements is built and investigated. As part of this project, we introduce an embedded Field Programmable Gate Array (eFPGA), adding flexibility to accelerate various workloads. In this article, we show our approach to design the eFPGA tile that supports the EPI SoC. While eFPGAs are inherently reconfigurable, their initial design has to be determined for tape-out. The design space of the eFPGA is explored and evaluated with different configurations of two HPC workloads, covering control and dataflow heavy applications. As a result, we present a well-balanced eFPGA design that can host several use cases and potential future ones by allocating 1% of the total EPI SoC area. Finally, our simulation results of the architectures on the eFPGA show great performance improvements over their software counterparts., European Processor Initiative (EPI) project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 826647, from Spanish Government (PID2019- 107255GB-C21/AEI /10.13039/501100011033), and from Generalitat de Catalunya (contracts 2017-SGR-1414 and 2017-SGR-1328). M. Moreto is partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship No. RYC-2016-21104., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

PIugSMART: a pluggable open-source module to implement multihop bypass in networks-on-chip

  • Monemi, Alireza
  • Pérez Gallardo, Iván
  • Leyva Santes, Neiel
  • Vallejo Gutiérrez, Enrique
  • Beivide Palacio, Julio Ramon
  • Moretó Planas, Miquel|||0000-0002-9848-8758
The integration of many processing elements per die makes it more difficult to provide low latency in the Network-on-Chip (NoC). Multihop bypass proposals, such as SMART, attack this problem by allowing flits to skip multiple routers in the path in a single cycle, drastically reducing latency while preserving a regular tiled layout. However, multihop bypass routers are more complex and relatively different from traditional NoC routers, since they rely on global broadcast signals and global allocation mechanisms. Additionally, the maximum number of nodes that can be bypassed within a single cycle is limited by the Critical Path Delay (CPD) of the NoC. Hence, a practical multihop bypass mechanism must also minimize this delay. To simplify the design of multihop bypass mechanisms, this work introduces PlugSMART, an open-source pluggable Verilog module that extends a traditional router to support multihop bypass. PlugSMART follows a black box approach, requiring minimal modifications from the original router. As an application of PlugSMART, we introduce ProSMART, a multihop bypass extension of the efficient NoC router ProNoC. ProSMART is evaluated using simulations, FPGA, and ASIC synthesis. Results show that it is more performant and requires significantly fewer resources than previous open-source designs. The comparison with OpenSMART++, the most recent state-of-the-art SMART-based NoC, shows up to a 50% reduction in both area and CPD. Overall, PlugSMART constitutes a simple alternative for fast and efficient upgrading of existing NoC routers, allowing to implement multihop bypass and significantly improve performance while preserving the original characteristics of the router design., This research was supported by the Spanish Ministry of Science and Innovation (FPI Grant BES2017-079971 and contracts PID2019- 107255GB-C21 and PID2019-105660RB-C22 /AEI / 10.13039 / 5011000 11033) and by the Catalan Government (contracts 2017-SGR-1414). This work also received funding from the European Union Horizon 2020 research and innovation programme under grant agreements number 779877 (Mont-Blanc 2020), 826647 (EPI) and 946002 (MEEP). M. Moreto was also partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship No. RYC-2016-21104., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Multilevel simulation-based co-design of next generation HPC microprocessors

  • Zaourar, Lilia
  • Benazouz, Mohamed
  • Mouhagir, Ayoub
  • Jebali, Fatma
  • Sassolas, Tanguy
  • Weill, Jean Christophe
  • Radulović, Milan
  • Martínez Palau, Francesc
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
  • Casas, Marc|||0000-0003-4564-2093
This paper demonstrates the combined use of three simulation tools in support of a co-design methodology for an HPC-focused System-on-a-Chip (SoC) design. The simulation tools make different trade-offs between simulation speed, accuracy and model abstraction level, and are shown to be complementary. We apply the MUSA trace-based simulator for the initial sizing of vector register length, system-level cache (SLC) size and memory bandwidth. It has proven to be very efficient at pruning the design space, as its models enable sufficient accuracy without having to resort to highly detailed simulations. Then we apply gem5, a cycle-accurate micro-architecture simulator, for a more refined analysis of the performance potential of our reference SoC architecture, with models able to capture detailed hardware behavior at the cost of simulation speed. Furthermore, we study the network-on-chip (NoC) topology and IP placements using both gem5 for representative small- to medium-scale configurations and SESAM/VPSim, a transaction-level emulator for larger scale systems with good simulation speed and sufficient architectural details. Overall, we consider several system design concerns, such as processor subsystem sizing and NoC settings. We apply the selected simulation tools, focusing on different levels of abstraction, to study several configurations with various design concerns and evaluate them to guide architectural design and optimization decisions. Performance analysis is carried out with a number of representative benchmarks. The obtained numerical results provide guidance and hints to designers regarding SIMD instruction width, SLC sizing, memory bandwidth as well as the best placement of memory controllers and NoC form factor. Thus, we provide critical insights for efficient design of future HPC microprocessors., This work has been performed in the context of the European Processor Initiative (EPI) project, which has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement № 826647. A special thanks to Amir Charif and Arief Wicaksana for their invaluable contributions to the SESAM/VPSim tool in the initial phases of the EPI project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploiting vector code semantics for efficient data cache prefetching

  • Martínez Palau, Francesc
  • Torrents Lapuerta, Martí
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
  • Casas, Marc|||0000-0003-4564-2093
Emerging workloads from domains like high performance computing, data analytics or deep learning consume large amounts of memory bandwidth. To mitigate this problem, computing systems include large and deep memory cache hierarchies that exploit both spatial and temporal locality. In this context, hardware data cache prefetching constitutes a useful method to anticipate cache misses and boost performance. Despite their success in terms of high coverage rates, current data cache prefetchers incur a significant number of late and sometimes useless prefetches. Additionally, these state-of-the-art prefetchers are not aware of architecture trends towards larger vector units and vector-length agnostic instruction sets. This paper demonstrates that these trends bring new prefetching opportunities that make it possible to increase the accuracy and timeliness of any state-of-the-art prefetcher with a negligible area cost. We propose the the Register Vector Length Agnostic (ReVeLA) prefetcher. ReVeLA exploits program semantics present in vectorized codes. The ReVeLA prefetcher complements existing data cache prefetchers by providing highly accurate prefetch requests that improve prefetching timeliness and accuracy without significantly increasing memory bandwidth consumption. When applied on top of a state-of-the-art out-of-order vector processor, ReVeLA delivers a speed-up of 1.23 × with respect to a system without any prefetching approach. When combined with the NextLine, BOP, SPP, and PPF prefetchers, ReVeLA improves performance by 6.57%, 4.46%, 11.83%, and 11.40% respectively, with respect to a vector processor equipped with these prefetching approaches. Additionally, our evaluation demonstrates that ReVeLA increases memory bandwidth consumption by only 3.74% when combined with the most performing data cache prefetcher of our experimental campaign., This work has been partially supported by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (contract PID2019-107255GB-C21) and ESF Investing in your future, the Generalitat of Catalunya (contract 2021-SGR-00763), the European HiPEAC Network of Excellence, and the European Processor Initiative (EPI), which is part of the European Union’s Horizon 2020 research and innovation program under grant agreement No. 826647. A. Armejach is a Serra Hunter Fellow. The authors thank the Departament de Recerca i Universitats de la Generalitat de Catalunya for supporting the Research Group "Performance understanding, analysis, and simulation/emulation of novel architectures" (Code: 2021 SGR 00865)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

DynAMO: Improving parallelism through dynamic placement of atomic memory operations

  • Soria Pardos, Víctor
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
  • Mück, Tiago
  • Suárez Gracía, Dario
  • Joao, Jose A.
  • Rico, Alejandro
  • Moretó Planas, Miquel|||0000-0002-9848-8758
With increasing core counts in modern multi-core designs, the overhead of synchronization jeopardizes the scalability and efficiency of parallel applications. To mitigate these overheads, modern cache-coherent protocols offer support for Atomic Memory Operations (AMOs) that can be executed near-core (near) or remotely in the on-chip memory hierarchy (far). This paper evaluates current available static AMO execution policies implemented in multi-core Systems-on-Chip (SoC) designs, which select AMOs' execution placement (near or far) based on the cache block coherence state. We propose three static policies and show that the performance of static policies is application dependent. Moreover, we show that one of our proposed static policies outperforms currently available implementations. Furthermore, we propose DynAMO, a predictor that selects the best location to execute the AMOs. DynAMO identifies the different locality patterns to make informed decisions, improving AMO latency and increasing overall throughput. DynAMO outperforms the best-performing static policy and provides geometric mean speed-ups of 1.09× across all workloads and 1.31× on AMO-intensive applications with respect to executing all AMOs near., This research was supported by the Spanish Ministry of Science and Innovation (MCIN) through contracts [PID2019-107255GB-C21], [TED2021-132634A-I00], and [PID2019-105660RB-C21]; the Generalitat of Catalunya through contract [2021-SGR-00763]; the Government of Aragon [T5820R]; the Arm-BSC Center of Excellence, and the European Processor Initiative (EPI) which is part of the European Union’s Horizon 2020 research and innovation program under grant agreement No. 826647. V. Soria-Pardos has been supported through an FPU fellowship [FPU20-02132]; A. Armejach is a Serra Hunter Fellow and has been partially supported by the Grant [IJCI-2017-33945] funded by MCIN/AEI/10.13039/501100011033; M. Moreto through a Ramón y Cajal fellowship [RYC-2016-21104]., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Software-only based diverse redundancy for ASIL-D automotive applications on embedded HPC platforms

  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Kosmidis, Leonidas
  • Hernández Luz, Carles
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., High-Performance Computing (HPC) platforms become a must in automotive systems to enable autonomous driving. However, automotive platforms must avoid Common Cause Failures (CCFs), as indicated by the ISO26262 automotive safety standard. CCFs can be avoided enforcing diverse redundancy. Unfortunately, HPC platforms fail to provide such support. This paper proposes a flexible and efficient software-based scheme to implement diverse redundancy on HPC platforms. A software implementation on a Commercial Off-The-Shelf ARM multicore proves the effectiveness of this scheme to guarantee diverse redundancy with negligible performance degradation. Our solution is the first step towards an automotive-compliant HPC platform., This work has been supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB and the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 826647 (EPI)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

gem5 + rtl: A framework to enable RTL models inside a full-system simulator

  • López Paradís, Guillem
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
  • Moretó Planas, Miquel|||0000-0002-9848-8758
In recent years there has been a surge of interest in designing custom accelerators for power-efficient high-performance computing. However, available tools to simulate low-level RTL designs often neglect the target system in which the design will operate. This hinders proper testing and debugging of functionalities, and does not allow co-designing the accelerator to obtain a balanced and efficient architecture. In this paper, we introduce gem5 + rtl, a flexible framework that enables simulation of RTL models inside a full-system software simulator. We present the framework’s functionality that allows easy integration of RTL models on a simulated system-on-chip (SoC) that is able to boot Linux and run complex multi-threaded and multi-programmed workloads. We demonstrate the framework with two relevant use cases that integrate a multi-core SoC with a Performance Monitoring Unit (PMU) and the NVIDIA Deep Learning Accelerator (NVDLA), showcasing how the framework enables testing RTL model features and how it can enable co-design taking into account the entire SoC., This research was supported by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014-2020 with a grant of 50% of total cost eligible under the DRAC project [001-P- 001723], by the Spanish goverment (grant RTI2018-095094- B-C21 CONSENT), by the Spanish Ministry of Science and Innovation (contracts PID2019-107255GB-C21) and by the Catalan Government (contracts 2017-SGR-1414, 2017-SGR705). This work has also been supported by the European Community’s Horizon 2020 Framework Programme under the Mont-Blanc 2020 and EPI projects (grant agreements n. 779877 and n. 826647); and by the Arm-BSC Center of Excellence. G. López-Paradís has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Ajuts per a la contractació de personal investigador novell fellowship No. 2021FI B00994. A. Armejach has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Juan de la Cierva postdoctoral fellowship number IJCI-2017-33945. M. Moretó has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship No. RYC-2016-21104., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Porting and optimizing BWA-MEM2 using the Fujitsu A64FX processor

  • Langarita Benítez, Rubén|||0000-0002-6080-724X
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
  • Ibáñez Marín, Pablo
  • Alastruey Benedé, Jesús
  • Moretó Planas, Miquel|||0000-0002-9848-8758
Sequence alignment pipelines for human genomes are an emerging workload that will dominate in the precision medicine field. BWA-MEM2 is a tool widely used in the scientific community to perform read mapping studies. In this paper, we port BWA-MEM2 to the AArch64 architecture using the ARMv8-A specification, and we compare the resulting version against an Intel Skylake system both in performance and in energy-to-solution. The porting effort entails numerous code modifications, since BWA-MEM2 implements certain kernels using x86_64 specific intrinsics, e.g., AVX-512. To adapt this code we use the recently introduced Arm's Scalable Vector Extensions (SVE). More specifically, we use Fujitsu's A64FX processor, the first to implement SVE. The A64FX powers the Fugaku Supercomputer that led the Top500 ranking from June 2020 to November 2021. After porting BWA-MEM2 we define and implement a number of optimizations to improve performance in the A64FX target architecture. We show that while the A64FX performance is lower than that of the Skylake system, A64FX delivers 11.6% better energy-to-solution on average. All the code used for this article is available at https://gitlab.bsc.es/rlangari/bwa-a64fx, This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (contracts PID2019-107255GB-C21 / AEI /10.13039/501100011033 and PID2019-105660RB-C21 / AEI / 10.13039/501100011033), Gobierno de Aragon (T5820R research group), the Generalitat de Catalunya (contracts 2017-SGR-1328 and 2017-SGR1414), and the European Union’s Horizon 2020 research and innovation program (Mont-Blanc 2020 project, grant agreement 779877). Finally, A. Armejach and M. Moreto have been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Juan de la Cierva fellowship no. IJCI-2017-33945 and Ramon y Cajal fellowship no. RYC-2016-21104, respectively., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An OpenMP free agent threads implementation

  • López, Victor
  • Criado Ledesma, Joel
  • Peñacoba Veigas, Raúl
  • Ferrer Ibañez, Roger
  • Teruel García, Xavier
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
In this paper, we introduce a design and implementation of the free agent threads for OpenMP. These threads increase the malleability of the OpenMP programming model, offering resource managers and runtime systems flexibility to manage threads and resources efficiently. We demonstrate how free agent threads can address load imbalances problems at the OpenMP level and at an MPI level or higher. We use two mini-apps extracted from two real HPC applications and representative of real-world codes to demonstrate this. We conclude that more malleability in thread management is necessary, and free agents can be regarded as a practical starting point to increase malleability in thread management., This work has been done as part of the European Processor Initiative project. The European Processor Initiative (EPI) (FPA: 800928) has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement EPI-SGA1: 826647. It has also received funding from the European Union's Horizon 2020/EuroHPC research and innovation programme under grant agreement No 955606 (DEEP-SEA); and the support of the Spanish Ministry of Science and Innovation (Computacion de Altas Prestaciones VIII: PID2019-107255GB)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A Tensor Marshaling Unit for sparse tensor algebra on general-purpose processors

  • Siracusa, Marco
  • Soria Pardos, Víctor
  • Sgherzi, Francesco
  • Randall, Joshua
  • Joseph, Douglas J.
  • Moretó Planas, Miquel|||0000-0002-9848-8758
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
This paper proposes the Tensor Marshaling Unit (TMU), a near-core programmable dataflow engine for multicore architectures that accelerates tensor traversals and merging, the most critical op-erations of sparse tensor workloads running on today’s computing infrastructures. The TMU leverages a novel multi-lane design that enables parallel tensor loading and merging, which naturally pro-duces vector operands that are marshaled into the core for efficient SIMD computation. The TMU supports all the necessary primitives to be tensor-format and tensor-algebra complete. We evaluate the TMU on a simulated multicore system using a broad set of ten-sor algebra workloads, achieving 3.6×, 2.8×, and 4.9× speedups over memory-intensive, compute-intensive, and merge-intensive vectorized software implementations, respectively., This work has been partially supported by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (contract PID2019-107255GB-C21), the Generalitat of Catalunya (contract 2021-SGR-00763), the Arm-BSC Center of Excellence, the European HiPEAC Network of Excellence, and the European Processor Initiative (EPI), which is part of the European Union’s Horizon 2020 research and innovation program under grant agreement No. 826647. M. Siracusa has been supported through an FI fellowship [2022FI_B 00969] and V. Soria-Pardos through an FPU fellowship [FPU20-02132]. A. Armejach is a Serra Hunter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Towards resilient EU HPC systems: A blueprint

  • Radojković, Petar
  • Marazakis, Manolis
  • Carpenter, Paul Matthew
  • Jeyapaul, Reiley
  • Gizopoulos, Dimitris
  • Schulz, Martin
  • Armejach Sanosa, Adrià|||0000-0003-2869-668X
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Canal Corretger, Ramon|||0000-0003-4542-204X
  • Moretó Planas, Miquel|||0000-0002-9848-8758
  • Salami, Behzad
  • Unsal, Osman Sabri
This document aims to spearhead a Europe-wide discussion on HPC system resilience and to help the European HPC community define best practices for resilience. We analyse a wide range of state-of-the-art resilience mechanisms and recommend the most effective approaches to employ in large-scale HPC systems. Our guidelines will be useful in the allocation of available resources, as well as guiding researchers and research funding towards the enhancement of resilience approaches with the highest priority and utility. Although our work is focused on the needs of next generation HPC systems in Europe, the principles and evaluations are applicable globally., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the projects ECOSCALE (grant agreement No 671632), EPI (grant agreement No 826647), EuroEXA (grant agreement No 754337), Eurolab4HPC (grant agreement No 800962), EVOLVE (grant agreement No 825061), EXA2PRO (grant agreement No 801015), ExaNest (grant agreement No 671553), ExaNoDe (grant agreement No 671578), EXDCI-2 (grant agreement No 800957), LEGaTO (grant agreement No 780681), MB2020 (grant agreement No 779877), RECIPE (grant agreement No 801137) and SDK4ED (grant agreement No 780572). The work was also supported by the European Commission’s Seventh Framework Programme under the projects CLERECO (grant agreement No 611404), the NCSA-Inria-ANL-BSC-JSCRiken-UTK Joint-Laboratory for Extreme Scale Computing – JLESC (https://jlesc.github.io/), OMPI-X project (No ECP-2.3.1.17) and the Spanish Government through Severo Ochoa programme (SEV-2015-0493). This work was sponsored in part by the U.S. Department of Energy's Office of Advanced Scientific Computing Research, program managers Robinson Pino and Lucy Nowell. This manuscript has been authored by UT-Battelle, LLC under Contract No DE-AC05-00OR22725 with the U.S. Department of Energy.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Short reasons for long vectors in HPC CPUs: a study based on RISC-V

  • Vizcaíno Serrano, Pablo
  • Ieronymakis, Georgios
  • Dimou, Nikolaus
  • Papaefstathiou, Vassilis
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Mantovani, Filippo|||0000-0003-3559-4825
For years, SIMD/vector units have enhanced the capabilities of modern CPUs in High-Performance Computing (HPC) and mobile technology. Typical commercially-available SIMD units process up to 8 double-precision elements with one instruction. The optimal vector width and its impact on CPU throughput due to memory latency and bandwidth remain challenging research areas. This study examines the behavior of four computational kernels on a RISC-V core connected to a customizable vector unit, capable of operating up to 256 double precision elements per instruction. The four codes have been purposefully selected to represent non-dense workloads: SpMV, BFS, PageRank, FFT. The experimental setup allows us to measure their performance while varying the vector length, the memory latency, and bandwidth. Our results not only show that larger vector lengths allow for better tolerance of limitations in the memory subsystem but also offer hope to code developers beyond dense linear algebra., This research has received funding from the European High Performance Computing Joint Undertaking (JU) under Framework Partnership Agreement No 800928 (European Processor Initiative) and Specific Grant Agreement No 101036168 (EPI SGA2). The JU receives support from the European Union’s Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, and Switzerland. The EPI-SGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenera-tionEU/PRTR., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Software-only based diverse redundancy for ASIL-D automotive applications on embedded HPC platforms

  • Alcaide Portet, Sergi
  • Kosmidis, Leonidas
  • Hernández Luz, Carles
  • Abella Ferrer, Jaume
©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., High-Performance Computing (HPC) platforms become a must in automotive systems to enable autonomous driving. However, automotive platforms must avoid Common Cause Failures (CCFs), as indicated by the ISO26262 automotive safety standard. CCFs can be avoided enforcing diverse redundancy. Unfortunately, HPC platforms fail to provide such support. This paper proposes a flexible and efficient software-based scheme to implement diverse redundancy on HPC platforms. A software implementation on a Commercial Off-The-Shelf ARM multicore proves the effectiveness of this scheme to guarantee diverse redundancy with negligible performance degradation. Our solution is the first step towards an automotive-compliant HPC platform., This work has been supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB and the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 826647 (EPI)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Exploiting vector code semantics for efficient data cache prefetching

  • Martínez Palau, Francesc
  • Torrents Lapuerta, Martí
  • Armejach Sanosa, Adrià
  • Casas, Marc
Emerging workloads from domains like high performance computing, data analytics or deep learning consume large amounts of memory bandwidth. To mitigate this problem, computing systems include large and deep memory cache hierarchies that exploit both spatial and temporal locality. In this context, hardware data cache prefetching constitutes a useful method to anticipate cache misses and boost performance. Despite their success in terms of high coverage rates, current data cache prefetchers incur a significant number of late and sometimes useless prefetches. Additionally, these state-of-the-art prefetchers are not aware of architecture trends towards larger vector units and vector-length agnostic instruction sets. This paper demonstrates that these trends bring new prefetching opportunities that make it possible to increase the accuracy and timeliness of any state-of-the-art prefetcher with a negligible area cost. We propose the the Register Vector Length Agnostic (ReVeLA) prefetcher. ReVeLA exploits program semantics present in vectorized codes. The ReVeLA prefetcher complements existing data cache prefetchers by providing highly accurate prefetch requests that improve prefetching timeliness and accuracy without significantly increasing memory bandwidth consumption. When applied on top of a state-of-the-art out-of-order vector processor, ReVeLA delivers a speed-up of 1.23 × with respect to a system without any prefetching approach. When combined with the NextLine, BOP, SPP, and PPF prefetchers, ReVeLA improves performance by 6.57%, 4.46%, 11.83%, and 11.40% respectively, with respect to a vector processor equipped with these prefetching approaches. Additionally, our evaluation demonstrates that ReVeLA increases memory bandwidth consumption by only 3.74% when combined with the most performing data cache prefetcher of our experimental campaign., This work has been partially supported by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (contract PID2019-107255GB-C21) and ESF Investing in your future, the Generalitat of Catalunya (contract 2021-SGR-00763), the European HiPEAC Network of Excellence, and the European Processor Initiative (EPI), which is part of the European Union’s Horizon 2020 research and innovation program under grant agreement No. 826647. A. Armejach is a Serra Hunter Fellow. The authors thank the Departament de Recerca i Universitats de la Generalitat de Catalunya for supporting the Research Group "Performance understanding, analysis, and simulation/emulation of novel architectures" (Code: 2021 SGR 00865)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

PIugSMART: a pluggable open-source module to implement multihop bypass in networks-on-chip

  • Monemi, Alireza
  • Pérez Gallardo, Iván
  • Leyva Santes, Neiel
  • Vallejo Gutiérrez, Enrique
  • Beivide Palacio, Julio Ramon
  • Moretó Planas, Miquel
The integration of many processing elements per die makes it more difficult to provide low latency in the Network-on-Chip (NoC). Multihop bypass proposals, such as SMART, attack this problem by allowing flits to skip multiple routers in the path in a single cycle, drastically reducing latency while preserving a regular tiled layout. However, multihop bypass routers are more complex and relatively different from traditional NoC routers, since they rely on global broadcast signals and global allocation mechanisms. Additionally, the maximum number of nodes that can be bypassed within a single cycle is limited by the Critical Path Delay (CPD) of the NoC. Hence, a practical multihop bypass mechanism must also minimize this delay. To simplify the design of multihop bypass mechanisms, this work introduces PlugSMART, an open-source pluggable Verilog module that extends a traditional router to support multihop bypass. PlugSMART follows a black box approach, requiring minimal modifications from the original router. As an application of PlugSMART, we introduce ProSMART, a multihop bypass extension of the efficient NoC router ProNoC. ProSMART is evaluated using simulations, FPGA, and ASIC synthesis. Results show that it is more performant and requires significantly fewer resources than previous open-source designs. The comparison with OpenSMART++, the most recent state-of-the-art SMART-based NoC, shows up to a 50% reduction in both area and CPD. Overall, PlugSMART constitutes a simple alternative for fast and efficient upgrading of existing NoC routers, allowing to implement multihop bypass and significantly improve performance while preserving the original characteristics of the router design., This research was supported by the Spanish Ministry of Science and Innovation (FPI Grant BES2017-079971 and contracts PID2019- 107255GB-C21 and PID2019-105660RB-C22 /AEI / 10.13039 / 5011000 11033) and by the Catalan Government (contracts 2017-SGR-1414). This work also received funding from the European Union Horizon 2020 research and innovation programme under grant agreements number 779877 (Mont-Blanc 2020), 826647 (EPI) and 946002 (MEEP). M. Moreto was also partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship No. RYC-2016-21104., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards reconfigurable accelerators in HPC: Designing a multipurpose eFPGA tile for heterogeneous SoCs

  • Hotfilter, Tim
  • Kreß, Fabian
  • Kempf, Fabian
  • Becker, Jürgen
  • De Haro Ruiz, Juan Miguel
  • Jiménez González, Daniel
  • Moretó Planas, Miquel
  • Álvarez Martínez, Carlos
  • Labarta Mancho, Jesús José
  • Baili, Imen
The goal of modern high performance computing platforms is to combine low power consumption and high throughput. Within the European Processor Initiative (EPI), such an SoC platform to meet the novel exascale requirements is built and investigated. As part of this project, we introduce an embedded Field Programmable Gate Array (eFPGA), adding flexibility to accelerate various workloads. In this article, we show our approach to design the eFPGA tile that supports the EPI SoC. While eFPGAs are inherently reconfigurable, their initial design has to be determined for tape-out. The design space of the eFPGA is explored and evaluated with different configurations of two HPC workloads, covering control and dataflow heavy applications. As a result, we present a well-balanced eFPGA design that can host several use cases and potential future ones by allocating 1% of the total EPI SoC area. Finally, our simulation results of the architectures on the eFPGA show great performance improvements over their software counterparts., European Processor Initiative (EPI) project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 826647, from Spanish Government (PID2019- 107255GB-C21/AEI /10.13039/501100011033), and from Generalitat de Catalunya (contracts 2017-SGR-1414 and 2017-SGR-1328). M. Moreto is partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship No. RYC-2016-21104., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Short reasons for long vectors in HPC CPUs: a study based on RISC-V

  • Vizcaíno Serrano, Pablo
  • Ieronymakis, Georgios
  • Dimou, Nikolaus
  • Papaefstathiou, Vassilis
  • Labarta Mancho, Jesús José
  • Mantovani, Filippo
For years, SIMD/vector units have enhanced the capabilities of modern CPUs in High-Performance Computing (HPC) and mobile technology. Typical commercially-available SIMD units process up to 8 double-precision elements with one instruction. The optimal vector width and its impact on CPU throughput due to memory latency and bandwidth remain challenging research areas. This study examines the behavior of four computational kernels on a RISC-V core connected to a customizable vector unit, capable of operating up to 256 double precision elements per instruction. The four codes have been purposefully selected to represent non-dense workloads: SpMV, BFS, PageRank, FFT. The experimental setup allows us to measure their performance while varying the vector length, the memory latency, and bandwidth. Our results not only show that larger vector lengths allow for better tolerance of limitations in the memory subsystem but also offer hope to code developers beyond dense linear algebra., This research has received funding from the European High Performance Computing Joint Undertaking (JU) under Framework Partnership Agreement No 800928 (European Processor Initiative) and Specific Grant Agreement No 101036168 (EPI SGA2). The JU receives support from the European Union’s Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, and Switzerland. The EPI-SGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenera-tionEU/PRTR., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multilevel simulation-based co-design of next generation HPC microprocessors

  • Zaourar, Lilia
  • Benazouz, Mohamed
  • Mouhagir, Ayoub
  • Jebali, Fatma
  • Sassolas, Tanguy
  • Weill, Jean Christophe
  • Radulović, Milan
  • Martínez Palau, Francesc
  • Armejach Sanosa, Adrià
  • Casas, Marc
This paper demonstrates the combined use of three simulation tools in support of a co-design methodology for an HPC-focused System-on-a-Chip (SoC) design. The simulation tools make different trade-offs between simulation speed, accuracy and model abstraction level, and are shown to be complementary. We apply the MUSA trace-based simulator for the initial sizing of vector register length, system-level cache (SLC) size and memory bandwidth. It has proven to be very efficient at pruning the design space, as its models enable sufficient accuracy without having to resort to highly detailed simulations. Then we apply gem5, a cycle-accurate micro-architecture simulator, for a more refined analysis of the performance potential of our reference SoC architecture, with models able to capture detailed hardware behavior at the cost of simulation speed. Furthermore, we study the network-on-chip (NoC) topology and IP placements using both gem5 for representative small- to medium-scale configurations and SESAM/VPSim, a transaction-level emulator for larger scale systems with good simulation speed and sufficient architectural details. Overall, we consider several system design concerns, such as processor subsystem sizing and NoC settings. We apply the selected simulation tools, focusing on different levels of abstraction, to study several configurations with various design concerns and evaluate them to guide architectural design and optimization decisions. Performance analysis is carried out with a number of representative benchmarks. The obtained numerical results provide guidance and hints to designers regarding SIMD instruction width, SLC sizing, memory bandwidth as well as the best placement of memory controllers and NoC form factor. Thus, we provide critical insights for efficient design of future HPC microprocessors., This work has been performed in the context of the European Processor Initiative (EPI) project, which has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement № 826647. A special thanks to Amir Charif and Arief Wicaksana for their invaluable contributions to the SESAM/VPSim tool in the initial phases of the EPI project., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A Tensor Marshaling Unit for sparse tensor algebra on general-purpose processors

  • Siracusa, Marco
  • Soria Pardos, Víctor
  • Sgherzi, Francesco
  • Randall, Joshua
  • Joseph, Douglas J.
  • Moretó Planas, Miquel
  • Armejach Sanosa, Adrià
This paper proposes the Tensor Marshaling Unit (TMU), a near-core programmable dataflow engine for multicore architectures that accelerates tensor traversals and merging, the most critical op-erations of sparse tensor workloads running on today’s computing infrastructures. The TMU leverages a novel multi-lane design that enables parallel tensor loading and merging, which naturally pro-duces vector operands that are marshaled into the core for efficient SIMD computation. The TMU supports all the necessary primitives to be tensor-format and tensor-algebra complete. We evaluate the TMU on a simulated multicore system using a broad set of ten-sor algebra workloads, achieving 3.6×, 2.8×, and 4.9× speedups over memory-intensive, compute-intensive, and merge-intensive vectorized software implementations, respectively., This work has been partially supported by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (contract PID2019-107255GB-C21), the Generalitat of Catalunya (contract 2021-SGR-00763), the Arm-BSC Center of Excellence, the European HiPEAC Network of Excellence, and the European Processor Initiative (EPI), which is part of the European Union’s Horizon 2020 research and innovation program under grant agreement No. 826647. M. Siracusa has been supported through an FI fellowship [2022FI_B 00969] and V. Soria-Pardos through an FPU fellowship [FPU20-02132]. A. Armejach is a Serra Hunter Fellow., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Towards resilient EU HPC systems: A blueprint

  • Radojković, Petar
  • Marazakis, Manolis
  • Carpenter, Paul Matthew
  • Jeyapaul, Reiley
  • Gizopoulos, Dimitris
  • Schulz, Martin
  • Armejach Sanosa, Adrià
  • Ayguadé Parra, Eduard
  • Canal Corretger, Ramon
  • Moretó Planas, Miquel
  • Salami, Behzad
  • Unsal, Osman Sabri
This document aims to spearhead a Europe-wide discussion on HPC system resilience and to help the European HPC community define best practices for resilience. We analyse a wide range of state-of-the-art resilience mechanisms and recommend the most effective approaches to employ in large-scale HPC systems. Our guidelines will be useful in the allocation of available resources, as well as guiding researchers and research funding towards the enhancement of resilience approaches with the highest priority and utility. Although our work is focused on the needs of next generation HPC systems in Europe, the principles and evaluations are applicable globally., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the projects ECOSCALE (grant agreement No 671632), EPI (grant agreement No 826647), EuroEXA (grant agreement No 754337), Eurolab4HPC (grant agreement No 800962), EVOLVE (grant agreement No 825061), EXA2PRO (grant agreement No 801015), ExaNest (grant agreement No 671553), ExaNoDe (grant agreement No 671578), EXDCI-2 (grant agreement No 800957), LEGaTO (grant agreement No 780681), MB2020 (grant agreement No 779877), RECIPE (grant agreement No 801137) and SDK4ED (grant agreement No 780572). The work was also supported by the European Commission’s Seventh Framework Programme under the projects CLERECO (grant agreement No 611404), the NCSA-Inria-ANL-BSC-JSCRiken-UTK Joint-Laboratory for Extreme Scale Computing – JLESC (https://jlesc.github.io/), OMPI-X project (No ECP-2.3.1.17) and the Spanish Government through Severo Ochoa programme (SEV-2015-0493). This work was sponsored in part by the U.S. Department of Energy's Office of Advanced Scientific Computing Research, program managers Robinson Pino and Lucy Nowell. This manuscript has been authored by UT-Battelle, LLC under Contract No DE-AC05-00OR22725 with the U.S. Department of Energy., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Porting and optimizing BWA-MEM2 using the Fujitsu A64FX processor

  • Langarita Benítez, Rubén
  • Armejach Sanosa, Adrià
  • Ibáñez Marín, Pablo
  • Alastruey Benedé, Jesús
  • Moretó Planas, Miquel
Sequence alignment pipelines for human genomes are an emerging workload that will dominate in the precision medicine field. BWA-MEM2 is a tool widely used in the scientific community to perform read mapping studies. In this paper, we port BWA-MEM2 to the AArch64 architecture using the ARMv8-A specification, and we compare the resulting version against an Intel Skylake system both in performance and in energy-to-solution. The porting effort entails numerous code modifications, since BWA-MEM2 implements certain kernels using x86_64 specific intrinsics, e.g., AVX-512. To adapt this code we use the recently introduced Arm's Scalable Vector Extensions (SVE). More specifically, we use Fujitsu's A64FX processor, the first to implement SVE. The A64FX powers the Fugaku Supercomputer that led the Top500 ranking from June 2020 to November 2021. After porting BWA-MEM2 we define and implement a number of optimizations to improve performance in the A64FX target architecture. We show that while the A64FX performance is lower than that of the Skylake system, A64FX delivers 11.6% better energy-to-solution on average. All the code used for this article is available at https://gitlab.bsc.es/rlangari/bwa-a64fx, This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (contracts PID2019-107255GB-C21 / AEI /10.13039/501100011033 and PID2019-105660RB-C21 / AEI / 10.13039/501100011033), Gobierno de Aragon (T5820R research group), the Generalitat de Catalunya (contracts 2017-SGR-1328 and 2017-SGR1414), and the European Union’s Horizon 2020 research and innovation program (Mont-Blanc 2020 project, grant agreement 779877). Finally, A. Armejach and M. Moreto have been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Juan de la Cierva fellowship no. IJCI-2017-33945 and Ramon y Cajal fellowship no. RYC-2016-21104, respectively., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

DynAMO: Improving parallelism through dynamic placement of atomic memory operations

  • Soria Pardos, Víctor
  • Armejach Sanosa, Adrià
  • Mück, Tiago
  • Suárez Gracía, Dario
  • Joao, Jose A.
  • Rico, Alejandro
  • Moretó Planas, Miquel
With increasing core counts in modern multi-core designs, the overhead of synchronization jeopardizes the scalability and efficiency of parallel applications. To mitigate these overheads, modern cache-coherent protocols offer support for Atomic Memory Operations (AMOs) that can be executed near-core (near) or remotely in the on-chip memory hierarchy (far). This paper evaluates current available static AMO execution policies implemented in multi-core Systems-on-Chip (SoC) designs, which select AMOs' execution placement (near or far) based on the cache block coherence state. We propose three static policies and show that the performance of static policies is application dependent. Moreover, we show that one of our proposed static policies outperforms currently available implementations. Furthermore, we propose DynAMO, a predictor that selects the best location to execute the AMOs. DynAMO identifies the different locality patterns to make informed decisions, improving AMO latency and increasing overall throughput. DynAMO outperforms the best-performing static policy and provides geometric mean speed-ups of 1.09× across all workloads and 1.31× on AMO-intensive applications with respect to executing all AMOs near., This research was supported by the Spanish Ministry of Science and Innovation (MCIN) through contracts [PID2019-107255GB-C21], [TED2021-132634A-I00], and [PID2019-105660RB-C21]; the Generalitat of Catalunya through contract [2021-SGR-00763]; the Government of Aragon [T5820R]; the Arm-BSC Center of Excellence, and the European Processor Initiative (EPI) which is part of the European Union’s Horizon 2020 research and innovation program under grant agreement No. 826647. V. Soria-Pardos has been supported through an FPU fellowship [FPU20-02132]; A. Armejach is a Serra Hunter Fellow and has been partially supported by the Grant [IJCI-2017-33945] funded by MCIN/AEI/10.13039/501100011033; M. Moreto through a Ramón y Cajal fellowship [RYC-2016-21104]., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

gem5 + rtl: A framework to enable RTL models inside a full-system simulator

  • López Paradís, Guillem
  • Armejach Sanosa, Adrià
  • Moretó Planas, Miquel
In recent years there has been a surge of interest in designing custom accelerators for power-efficient high-performance computing. However, available tools to simulate low-level RTL designs often neglect the target system in which the design will operate. This hinders proper testing and debugging of functionalities, and does not allow co-designing the accelerator to obtain a balanced and efficient architecture. In this paper, we introduce gem5 + rtl, a flexible framework that enables simulation of RTL models inside a full-system software simulator. We present the framework’s functionality that allows easy integration of RTL models on a simulated system-on-chip (SoC) that is able to boot Linux and run complex multi-threaded and multi-programmed workloads. We demonstrate the framework with two relevant use cases that integrate a multi-core SoC with a Performance Monitoring Unit (PMU) and the NVIDIA Deep Learning Accelerator (NVDLA), showcasing how the framework enables testing RTL model features and how it can enable co-design taking into account the entire SoC., This research was supported by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014-2020 with a grant of 50% of total cost eligible under the DRAC project [001-P- 001723], by the Spanish goverment (grant RTI2018-095094- B-C21 CONSENT), by the Spanish Ministry of Science and Innovation (contracts PID2019-107255GB-C21) and by the Catalan Government (contracts 2017-SGR-1414, 2017-SGR705). This work has also been supported by the European Community’s Horizon 2020 Framework Programme under the Mont-Blanc 2020 and EPI projects (grant agreements n. 779877 and n. 826647); and by the Arm-BSC Center of Excellence. G. López-Paradís has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Ajuts per a la contractació de personal investigador novell fellowship No. 2021FI B00994. A. Armejach has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Juan de la Cierva postdoctoral fellowship number IJCI-2017-33945. M. Moretó has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship No. RYC-2016-21104., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An OpenMP free agent threads implementation

  • López, Victor
  • Criado Ledesma, Joel
  • Peñacoba Veigas, Raúl
  • Ferrer Ibañez, Roger
  • Teruel García, Xavier
  • Garcia Gasulla, Marta
In this paper, we introduce a design and implementation of the free agent threads for OpenMP. These threads increase the malleability of the OpenMP programming model, offering resource managers and runtime systems flexibility to manage threads and resources efficiently. We demonstrate how free agent threads can address load imbalances problems at the OpenMP level and at an MPI level or higher. We use two mini-apps extracted from two real HPC applications and representative of real-world codes to demonstrate this. We conclude that more malleability in thread management is necessary, and free agents can be regarded as a practical starting point to increase malleability in thread management., This work has been done as part of the European Processor Initiative project. The European Processor Initiative (EPI) (FPA: 800928) has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement EPI-SGA1: 826647. It has also received funding from the European Union's Horizon 2020/EuroHPC research and innovation programme under grant agreement No 955606 (DEEP-SEA); and the support of the Spanish Ministry of Science and Innovation (Computacion de Altas Prestaciones VIII: PID2019-107255GB)., Peer Reviewed, Postprint (author's final draft)