Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Makinote: An FPGA-based HW/SW platform for pre-silicon emulation of RISC-V designs

  • Perdomo Hourné, Elias Augusto|||0000-0002-2279-6068
  • Kropotov, Alexander
  • Cano Ladino, Francelly Katherine
  • Ali Shah, Syed Zafar
  • Cervero García, Teresa
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Salami, Behzad
Emulating chip functionality before silicon production is crucial, especially with the increasing prevalence of RISC-V-based designs. FPGAs are promising candidates for such purposes due to their high-speed and reconfigurable architecture. In this paper, we introduce our Makinote, an FPGA-based Cluster platform, hosted at Barcelona Supercomputing Center (BSC-CNS), which is composed of a large number of FPGAs (in total 96 AMD/Xilinx Alveo U55c) to emulate massive size RTL designs (up to 750M ASIC cells)1. In addition, we introduce our FPGA shell as a powerful tool to facilitate the utilization of such a large FPGA cluster with minimal effort needed by the designers. The proposed FPGA shell provides an easy-to-use interface for the RTL developers to rapidly port such design into several FPGAs by automatically connecting to the necessary ports, e.g., PCIe Gen4, DRAM (DDR4 and HBM), ETH10g/100g. Moreover, specific drivers for exploiting RISC-V based architectures are provided within the set of tools associated with the FPGA shell. We release the tool online for further extensions.2 We validate the efficiency of our hardware platform (i.e., FPGA cluster) and the software tool (i.e., FPGA Shell) by emulating a RISC-V processor and experimenting HPC Challenge application running on 32 FPGAs. Our results demonstrate that the performance improves by 8 times over the single-FPGA case., This work has received funding from the MEEP project (European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002), from ”Lenovo-BSC Contract-Framework (2022)”, from the Spanish Government (PID2019-107255GB-C21/AEI /10.13039/501100011033, CEX2021-001148-S funded by MCIN/AEI / 10.13039/501100011033), and from Generalitat de Catalunya (contract 2021-SGR-01007)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Challenges and opportunities for RISC-V architectures towards genomics-based workloads

  • Gómez Sánchez, Gonzalo
  • Call Barreiro, Erin|||0000-0002-2770-1662
  • Teruel García, Xavier
  • Alonso Parrilla, Lorena
  • Morán Castany, Ignasi
  • Pérez Elena, Miguel Ángel
  • Torrents Arenales, David
  • Berral García, Josep Lluís|||0000-0003-3037-3580
The use of large-scale supercomputing architectures is a hard requirement for scientific computing Big-Data applications. An example is genomics analytics, where millions of data transformations and tests per patient need to be done to find relevant clinical indicators. Therefore, to ensure open and broad access to high-performance technologies, governments, and academia are pushing toward the introduction of novel computing architectures in large-scale scientific environments. This is the case of RISC-V, an open-source and royalty-free instruction-set architecture. To evaluate such technologies, here we present the Variant-Interaction Analytics use case benchmarking suite and datasets. Through this use case, we search for possible genetic interactions using computational and statistical methods, providing a representative case for heavy ETL (Extract, Transform, Load) data processing. Current implementations are implemented in x86-based supercomputers (e.g. MareNostrum-IV at the Barcelona Supercomputing Center (BSC)), and future steps propose RISC-V as part of the next MareNostrum generations. Here we describe the Variant Interaction Use Case, highlighting the characteristics leveraging high-performance computing, indicating the caveats and challenges towards the next RISC-V developments and designs to come from a first comparison between x86 and RISC-V architectures on real Variant Interaction executions over real hardware implementations., This work has been partially financed by the European Commission (EU-HORIZON NEARDATA GA.101092644, VITAMIN-V GA.101093062), the MEEP Project which received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from the European Union’s Horizon 2020 research and innovation program and Spain, Croatia and Turkey. Also by the Spanish Ministry of Science (MICINN) under scholarship BES-2017-081635, the Research State Agency (AEI) and European Regional Development Funds (ERDF/FEDER) under DALEST grant agreement PID2021-126248OBI00, MCIN/AEI/10.13039/ 501100011033/FEDER and PID GA PID2019-107255GB-C21, and the Generalitat de Catalunya (AGAUR) under grant agreements 2021-SGR-00478, 2021-SGR-01626 and ”FSE Invertint en el teu futur”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

PIugSMART: a pluggable open-source module to implement multihop bypass in networks-on-chip

  • Monemi, Alireza
  • Pérez Gallardo, Iván
  • Leyva Santes, Neiel
  • Vallejo Gutiérrez, Enrique
  • Beivide Palacio, Julio Ramon
  • Moretó Planas, Miquel|||0000-0002-9848-8758
The integration of many processing elements per die makes it more difficult to provide low latency in the Network-on-Chip (NoC). Multihop bypass proposals, such as SMART, attack this problem by allowing flits to skip multiple routers in the path in a single cycle, drastically reducing latency while preserving a regular tiled layout. However, multihop bypass routers are more complex and relatively different from traditional NoC routers, since they rely on global broadcast signals and global allocation mechanisms. Additionally, the maximum number of nodes that can be bypassed within a single cycle is limited by the Critical Path Delay (CPD) of the NoC. Hence, a practical multihop bypass mechanism must also minimize this delay. To simplify the design of multihop bypass mechanisms, this work introduces PlugSMART, an open-source pluggable Verilog module that extends a traditional router to support multihop bypass. PlugSMART follows a black box approach, requiring minimal modifications from the original router. As an application of PlugSMART, we introduce ProSMART, a multihop bypass extension of the efficient NoC router ProNoC. ProSMART is evaluated using simulations, FPGA, and ASIC synthesis. Results show that it is more performant and requires significantly fewer resources than previous open-source designs. The comparison with OpenSMART++, the most recent state-of-the-art SMART-based NoC, shows up to a 50% reduction in both area and CPD. Overall, PlugSMART constitutes a simple alternative for fast and efficient upgrading of existing NoC routers, allowing to implement multihop bypass and significantly improve performance while preserving the original characteristics of the router design., This research was supported by the Spanish Ministry of Science and Innovation (FPI Grant BES2017-079971 and contracts PID2019- 107255GB-C21 and PID2019-105660RB-C22 /AEI / 10.13039 / 5011000 11033) and by the Catalan Government (contracts 2017-SGR-1414). This work also received funding from the European Union Horizon 2020 research and innovation programme under grant agreements number 779877 (Mont-Blanc 2020), 826647 (EPI) and 946002 (MEEP). M. Moreto was also partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship No. RYC-2016-21104., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Enabling high-level parallel programming on multi-FPGA clusters

  • De Haro Ruiz, Juan Miguel|||0000-0002-7427-9118
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
Field Programmable Gate Arrays (FPGA) are still relatively new in the High Performance Computing (HPC) field. Hence, they still lack a mature ecosystem that allows non-FPGA experts to scale an application with many devices operating in parallel. In this paper, we add support for message passing inspired by the Message Passing Interface (MPI) to the Marenostrum Exascale Emulation Platform (MEEP) cluster, a state-of-the-art FPGA cluster. We use the OmpSs@FPGA programming model, which allows C/C++ code to run on the FPGA and call functions that behave like the well-known MPI\_Send/Recv. For that, we implement the message passing runtime over the MEEP 100Gb Ethernet network. This network includes a switch connected to the QSFP port of the FPGA cards. The switch enables all-to-all connectivity without adding routers in the FPGA fabric. We also introduce a method to manage FPGAs that are PCIe-hosted by remote CPU nodes. I.e. from any CPU node we can load the bitstream, configure it, and transfer data to FPGAs that are attached to a different node. Finally, we evaluate the bandwidth of FPGA-FPGA, and CPU-FPGA local and remote communication, as well as the performance of benchmarks scaling from 1 to 64 FPGAs using the infrastructure presented in this paper. The benchmarks are N-body, Heat with Gauss-Seidel solver and Cholesky. We compare the results with the MareNostrum 4 supercomputer and get 2.3x and 3.5x better performance per power for the N-body and Heat., We thank the MEEP project [Horizon 2020 grant number 946002] for providing us the FPGA cluster used in this work. This work was supported by the TEXTAROSSA project [Horizon 2020 grant number 956831]; the Spanish Government [grant numbers PCI2021121964, PDC2022-133323-I00, PID2019-107255GB-C21, MICIU/AEI/ 10.13039/501100011033]; and the Generalitat de Catalunya [grant number 2021 SGR 01007]., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Accelerating SpMV on FPGAs through block-row compress: a task-based approach

  • Oliver Segura, José
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Cervero García, Teresa
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Davis, John D.
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
Sparse Matrix-Vector multiplication (SpMV), computing y=α⋅A×x+β⋅y where y,x are dense vectors, α,β two scalar constants, and A is a sparse matrix, is a key kernel in many HPC applications. It exhibits a kind of memory access that is extremely hard to perform efficiently, due to its random access. In this paper, we present a new approach to accelerate SpMV on FPGAs. As FPGAs lack a default memory hierarchy, they can adapt to specific applications better. Also, an increasing number of FPGAs include High Bandwidth Memory (HBM), making the SpMV problem especially appealing to tackle on these kind of devices. We define a new sparse matrix encoding format (b8c) and its corresponding SpMV implementation using OmpSs@FPGA and HLS. This format allows us to leverage many of the FPGA strengths for intensive data processing, such as data streaming, customizable datapaths widths, parallel memory access for off-chip memory in the case of multiple memory channels (like in HBM), parallel memory access for on-chip memory and pipelining. We tested our proposal for both DDR and HBM memories to show the adaptability and scalability of our design. The presented b8c SpMV implementation is able to achieve higher performance than the state-of-the-art FPGA implementation of SpMV over all the matrices in the data set, achieving 3.52x performance on average with a minimum of 1.82x and a maximum of 6.28x even when running at 75% the frequency., This work has received funding from the MEEP project (European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002), from ”Lenovo-BSC Contract-Framework (2022)”, from the Spanish Government (PID2019-107255GB-C21/AEI /10.13039/501100011033, CEX2021-001148-S funded by MCIN/AEI / 10.13039/501100011033), and from Generalitat de Catalunya (contract 2021-SGR-01007)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

OpenPiton optimizations towards high performance manycores

  • Leyva Santes, Neiel Israel
  • Monemi, Alireza
  • Oliete Escuín, Noelia
  • López Paradís, Guillem
  • Abancens Calvo, Xabier
  • Balkind, Jonathan
  • Vallejo Gutiérrez, Enrique
  • Moretó Planas, Miquel|||0000-0002-9848-8758
  • Álvarez Martí, Lluc|||0000-0003-0506-8867
In recent years, numerous multicore RISC-V platforms have emerged. Within the RISC-V ecosystem, Networks-on-Chip (NoCs) such as OpenPiton are employed in designs that aim to scale to a large number of cores. This paper presents a set of extensions and optimizations to OpenPiton for high-performance manycores. The key contributions are enabling multiple memory controllers, supporting router bypassing and NoC concentration, and adding support for configurable cache sizes and cache block sizes. On a 64-core manycore architecture, these new features and optimizations provide a geometric mean speedup of 6.5x compared to the OpenPiton baseline., This work has been partially supported by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (contracts PID2019- 107255GB-C21, PID2019-105660RB-C22 and TED2021-131176B-I00), by the Generalitat de Catalunya (contract 2021-SGR-00763), by the European Union within the framework of the ERDF of Catalonia 2014- 2020 under the DRAC project [001-P-001723] and by the European NextGenerationEU/PRTR, and by Lenovo-BSC Contract-Framework Contract (2022). The MEEP Project has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from the European Union’s Horizon 2020 research and innovation program and Spain, Croatia and Turkey. G. López-Paradís has been supported by the Generalitat de Catalunya through a FI fellowship 2021FI-B00994., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The Marenostrum experimental exascale platform (MEEP)

  • Fell, Alexander
  • Mazure, Daniel J.
  • Garcia, Teresa C.
  • Perez, Borja
  • Teruel, Xavier
  • Wilson, Pete
  • Davis, John D.
Nascent Open Source Instruction Set Architectures such as OpenPOWER or RISC-V, allow software/hardware co-designers to fully utilize the underlying hardware, modify it or extend it based on their needs. In this paper, we introduce the vision of the MareNostrum Experimental Exascale Platform (MEEP), an Open Source platform enabling software and hardware stack experimentation targeting the High-Performance Computing (HPC) ecosystem. MEEP is built with state-of-the-art FPGAs that support PCIe and High Bandwidth Memory (HBM), making it ideal to emulate chiplet-based HPC accelerators such as ACME, at the chip, package, and/or system level. MEEP provides an FPGA Shell containing standardized interfaces (I/O and memory), enabling an emulated accelerator to communicate with the hardware of the FPGA and ensures quick integration. The first demonstration of MEEP is mapping a new accelerator, the Accelerated Compute and Memory Engine (ACME), on to this digital laboratory. This enables exploration of this novel disaggregated architecture, which separates the computation from the memory operations, optimizing the accelerator for both dense (compute-bound) as well as sparse (memory-bandwidth bound) workloads. Dense workloads focus on the computational capabilities of the engine, while dedicated processors for memory accesses optimize non-unit stride and/or random memory accesses required by sparse workloads. MEEP is an open source digital laboratory that can provide a future environment for full-stack co-design and pre-silicon exploration. MEEP invites software developers and hardware engineers to build the application, compiler, libraries and the hardware to solve future challenges in the HPC, AI, ML, and DL domains., This work has been supported by the EU H2020 project MareNostrum Experimental Exascale Platform (MEEP), and funded by the European Commission under the grant agreement No. 946002., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Coyote: an open source simulation tool to enable RISC-V in HPC

  • Pérez, Borja
  • Fell, Alexander
  • Davis, John D.
The confluence of technology trends and economics has reincarnated computer architecture and specifically, software-hardware co-design. We are entering a new era of a completely open ecosystem, from applications to chips and everything in between. The software-hardware co-design of supercomputers for tomorrow requires flexible tools today that will take us to the Exascale and beyond. The MareNostrum Experimental Exascale Platform (MEEP) addresses this by proposing a flexible FPGA-based emulation platform, designed to explore hardware-software co-designs for future RISC-V supercomputers. This platform is part of an open ecosystem, allowing its infrastructure to be reused in other projects. MEEP's inaugural emulated system will be a RISC- V based self-hosted HPC vector and systolic array accelerator, with a special aim at efficient data movement. Early development stages for such an architecture require fast, scalable and easy to modify simulation tools, with the right granularity and fidelity, enabling rapid design space exploration. Being a part of MEEP, this paper introduces Coyote, a new open source, execution-driven simulator based on the open source RISC- VISA and which can provide detailed insights at various levels and granularities. Coyote focuses on data movement and the modelling of the memory hierarchy of the system, which is one of the main hurdles for high performance sparse workloads, while omitting lower level details. As a result, performance evaluation shows that Coyote achieves an aggregate simulation of up to 6 MIPS when modelling up to 128 cores. This enables the fast comparison of different designs for future RISC- V based HPC architectures., The MEEP project has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from the European Union’s Horizon 2020 research and innovation program and Spain, Croatia, and Turkey., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A Novel Set of Directives for Multi-device Programming with OpenMP

  • Torres, Raul
  • Ferrer, Roger
  • Teruel, Xavier
This work was supported by MEEP project, which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from theEuropean Union’s Horizon 2020 research and innovation programme and Spain, Croatia, Turkey., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards high scalability and fine-grained parallelism on distributed HPC platforms

  • De Haro Ruiz, Juan Miguel|||0000-0002-7427-9118
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Morais, Lucas Henrique
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
Current High-Performance Computing systems rely on massive parallelism to achieve exascale performance. They use task scheduling and message-passing programming models to explore complementary sources of parallelism. Combining the two holds the promise of allowing seamless exploitation of both intra- and inter-node concurrency while leveraging widely-known programming abstractions. Still, the interaction between the two raises coordination problems that could make work distribution excessively costly, limiting performance. This work is the first to evaluate comprehensive hardware acceleration of their combined use integrating them in a programming model that further exploits their synergies. The hardware/software co-design approach proposed for this purpose is prototyped on a cluster of 64 FPGA nodes, where each holds a RISC-V Rocket Chip CPU with 8 cores. On one hand, this article combines OMPIF and Picos, which are hardware accelerators for message passing and task scheduling respectively. They interface with the CPU through RoCC-based custom RISC-V instructions. On the other hand, we present the Implicit Message Passing (IMP) programming model, that extends task scheduling abstractions to leverage MPI-mediated inter-node parallelism without requiring explicit MPI calls. Thus, IMP transparently allows the dataflow-style execution induced by task scheduling to span multiple nodes. We implement three benchmarks, N-body, Heat, and Cholesky, each with two different strategies, IMP and explicit MPI, and evaluate them on the multi-core FPGA-based cluster. We demonstrate our hardware-software co-design approach achieves near-linear scalability with IMP and the OMPIF/Picos accelerators, and reduces task management overhead from 2200 to 300 cycles per task. Furthermore, when leveraging all 512 cores (split among the 64 nodes), we measure speedups of 2.04x (40x in communication), 1.25x (7x in communication), and 7.29x (25x in communication) compared with unaccelerated MPI for N-body, Heat, and Cholesky respectively. Finally, at 64 nodes, we respectively achieve 99%, 83%, and 79% of weak scaling efficiency., We thank the MEEP project [Horizon 2020 grant number 946002] for providing us the FPGA cluster used in this work. This work is promoted by the Barcelona Zettascale Laboratory, backed by the Ministry for Digital Transformation and of Public Services, within the framework of the Recovery, Transformation, and Resilience Plan - funded by the European Union - NextGenerationEU. This publication is part of the research project ST4HPC - PID2023-147979NB-C21 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU. This work is also supported by the Generalitat de Catalunya [grant number 2021 SGR 01007]., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards high scalability and fine-grained parallelism on distributed HPC platforms

  • De Haro Ruiz, Juan Miguel
  • Álvarez Martínez, Carlos
  • Jiménez González, Daniel
  • Morais, Lucas Henrique
  • Martorell Bofill, Xavier
Current High-Performance Computing systems rely on massive parallelism to achieve exascale performance. They use task scheduling and message-passing programming models to explore complementary sources of parallelism. Combining the two holds the promise of allowing seamless exploitation of both intra- and inter-node concurrency while leveraging widely-known programming abstractions. Still, the interaction between the two raises coordination problems that could make work distribution excessively costly, limiting performance. This work is the first to evaluate comprehensive hardware acceleration of their combined use integrating them in a programming model that further exploits their synergies. The hardware/software co-design approach proposed for this purpose is prototyped on a cluster of 64 FPGA nodes, where each holds a RISC-V Rocket Chip CPU with 8 cores. On one hand, this article combines OMPIF and Picos, which are hardware accelerators for message passing and task scheduling respectively. They interface with the CPU through RoCC-based custom RISC-V instructions. On the other hand, we present the Implicit Message Passing (IMP) programming model, that extends task scheduling abstractions to leverage MPI-mediated inter-node parallelism without requiring explicit MPI calls. Thus, IMP transparently allows the dataflow-style execution induced by task scheduling to span multiple nodes. We implement three benchmarks, N-body, Heat, and Cholesky, each with two different strategies, IMP and explicit MPI, and evaluate them on the multi-core FPGA-based cluster. We demonstrate our hardware-software co-design approach achieves near-linear scalability with IMP and the OMPIF/Picos accelerators, and reduces task management overhead from 2200 to 300 cycles per task. Furthermore, when leveraging all 512 cores (split among the 64 nodes), we measure speedups of 2.04x (40x in communication), 1.25x (7x in communication), and 7.29x (25x in communication) compared with unaccelerated MPI for N-body, Heat, and Cholesky respectively. Finally, at 64 nodes, we respectively achieve 99%, 83%, and 79% of weak scaling efficiency., We thank the MEEP project [Horizon 2020 grant number 946002] for providing us the FPGA cluster used in this work. This work is promoted by the Barcelona Zettascale Laboratory, backed by the Ministry for Digital Transformation and of Public Services, within the framework of the Recovery, Transformation, and Resilience Plan - funded by the European Union - NextGenerationEU. This publication is part of the research project ST4HPC - PID2023-147979NB-C21 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU. This work is also supported by the Generalitat de Catalunya [grant number 2021 SGR 01007]., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A Novel Set of Directives for Multi-device Programming with OpenMP

  • Torres, Raul
  • Ferrer, Roger
  • Teruel, Xavier
This work was supported by MEEP project, which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from theEuropean Union’s Horizon 2020 research and innovation programme and Spain, Croatia, Turkey., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

OpenPiton optimizations towards high performance manycores

  • Leyva Santes, Neiel Israel
  • Monemi, Alireza
  • Oliete Escuín, Noelia
  • López Paradís, Guillem
  • Abancens Calvo, Xabier
  • Balkind, Jonathan
  • Vallejo Gutiérrez, Enrique
  • Moretó Planas, Miquel
  • Álvarez Martí, Lluc
In recent years, numerous multicore RISC-V platforms have emerged. Within the RISC-V ecosystem, Networks-on-Chip (NoCs) such as OpenPiton are employed in designs that aim to scale to a large number of cores. This paper presents a set of extensions and optimizations to OpenPiton for high-performance manycores. The key contributions are enabling multiple memory controllers, supporting router bypassing and NoC concentration, and adding support for configurable cache sizes and cache block sizes. On a 64-core manycore architecture, these new features and optimizations provide a geometric mean speedup of 6.5x compared to the OpenPiton baseline., This work has been partially supported by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (contracts PID2019- 107255GB-C21, PID2019-105660RB-C22 and TED2021-131176B-I00), by the Generalitat de Catalunya (contract 2021-SGR-00763), by the European Union within the framework of the ERDF of Catalonia 2014- 2020 under the DRAC project [001-P-001723] and by the European NextGenerationEU/PRTR, and by Lenovo-BSC Contract-Framework Contract (2022). The MEEP Project has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from the European Union’s Horizon 2020 research and innovation program and Spain, Croatia and Turkey. G. López-Paradís has been supported by the Generalitat de Catalunya through a FI fellowship 2021FI-B00994., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

PIugSMART: a pluggable open-source module to implement multihop bypass in networks-on-chip

  • Monemi, Alireza
  • Pérez Gallardo, Iván
  • Leyva Santes, Neiel
  • Vallejo Gutiérrez, Enrique
  • Beivide Palacio, Julio Ramon
  • Moretó Planas, Miquel
The integration of many processing elements per die makes it more difficult to provide low latency in the Network-on-Chip (NoC). Multihop bypass proposals, such as SMART, attack this problem by allowing flits to skip multiple routers in the path in a single cycle, drastically reducing latency while preserving a regular tiled layout. However, multihop bypass routers are more complex and relatively different from traditional NoC routers, since they rely on global broadcast signals and global allocation mechanisms. Additionally, the maximum number of nodes that can be bypassed within a single cycle is limited by the Critical Path Delay (CPD) of the NoC. Hence, a practical multihop bypass mechanism must also minimize this delay. To simplify the design of multihop bypass mechanisms, this work introduces PlugSMART, an open-source pluggable Verilog module that extends a traditional router to support multihop bypass. PlugSMART follows a black box approach, requiring minimal modifications from the original router. As an application of PlugSMART, we introduce ProSMART, a multihop bypass extension of the efficient NoC router ProNoC. ProSMART is evaluated using simulations, FPGA, and ASIC synthesis. Results show that it is more performant and requires significantly fewer resources than previous open-source designs. The comparison with OpenSMART++, the most recent state-of-the-art SMART-based NoC, shows up to a 50% reduction in both area and CPD. Overall, PlugSMART constitutes a simple alternative for fast and efficient upgrading of existing NoC routers, allowing to implement multihop bypass and significantly improve performance while preserving the original characteristics of the router design., This research was supported by the Spanish Ministry of Science and Innovation (FPI Grant BES2017-079971 and contracts PID2019- 107255GB-C21 and PID2019-105660RB-C22 /AEI / 10.13039 / 5011000 11033) and by the Catalan Government (contracts 2017-SGR-1414). This work also received funding from the European Union Horizon 2020 research and innovation programme under grant agreements number 779877 (Mont-Blanc 2020), 826647 (EPI) and 946002 (MEEP). M. Moreto was also partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship No. RYC-2016-21104., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Enabling high-level parallel programming on multi-FPGA clusters

  • De Haro Ruiz, Juan Miguel
  • Álvarez Martínez, Carlos
  • Jiménez González, Daniel
  • Martorell Bofill, Xavier
Field Programmable Gate Arrays (FPGA) are still relatively new in the High Performance Computing (HPC) field. Hence, they still lack a mature ecosystem that allows non-FPGA experts to scale an application with many devices operating in parallel. In this paper, we add support for message passing inspired by the Message Passing Interface (MPI) to the Marenostrum Exascale Emulation Platform (MEEP) cluster, a state-of-the-art FPGA cluster. We use the OmpSs@FPGA programming model, which allows C/C++ code to run on the FPGA and call functions that behave like the well-known MPI\_Send/Recv. For that, we implement the message passing runtime over the MEEP 100Gb Ethernet network. This network includes a switch connected to the QSFP port of the FPGA cards. The switch enables all-to-all connectivity without adding routers in the FPGA fabric. We also introduce a method to manage FPGAs that are PCIe-hosted by remote CPU nodes. I.e. from any CPU node we can load the bitstream, configure it, and transfer data to FPGAs that are attached to a different node. Finally, we evaluate the bandwidth of FPGA-FPGA, and CPU-FPGA local and remote communication, as well as the performance of benchmarks scaling from 1 to 64 FPGAs using the infrastructure presented in this paper. The benchmarks are N-body, Heat with Gauss-Seidel solver and Cholesky. We compare the results with the MareNostrum 4 supercomputer and get 2.3x and 3.5x better performance per power for the N-body and Heat., We thank the MEEP project [Horizon 2020 grant number 946002] for providing us the FPGA cluster used in this work. This work was supported by the TEXTAROSSA project [Horizon 2020 grant number 956831]; the Spanish Government [grant numbers PCI2021121964, PDC2022-133323-I00, PID2019-107255GB-C21, MICIU/AEI/ 10.13039/501100011033]; and the Generalitat de Catalunya [grant number 2021 SGR 01007]., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Marenostrum experimental exascale platform (MEEP)

  • Fell, Alexander
  • Mazure, Daniel J.
  • Garcia, Teresa C.
  • Perez, Borja
  • Teruel, Xavier
  • Wilson, Pete
  • Davis, John D.
Nascent Open Source Instruction Set Architectures such as OpenPOWER or RISC-V, allow software/hardware co-designers to fully utilize the underlying hardware, modify it or extend it based on their needs. In this paper, we introduce the vision of the MareNostrum Experimental Exascale Platform (MEEP), an Open Source platform enabling software and hardware stack experimentation targeting the High-Performance Computing (HPC) ecosystem. MEEP is built with state-of-the-art FPGAs that support PCIe and High Bandwidth Memory (HBM), making it ideal to emulate chiplet-based HPC accelerators such as ACME, at the chip, package, and/or system level. MEEP provides an FPGA Shell containing standardized interfaces (I/O and memory), enabling an emulated accelerator to communicate with the hardware of the FPGA and ensures quick integration. The first demonstration of MEEP is mapping a new accelerator, the Accelerated Compute and Memory Engine (ACME), on to this digital laboratory. This enables exploration of this novel disaggregated architecture, which separates the computation from the memory operations, optimizing the accelerator for both dense (compute-bound) as well as sparse (memory-bandwidth bound) workloads. Dense workloads focus on the computational capabilities of the engine, while dedicated processors for memory accesses optimize non-unit stride and/or random memory accesses required by sparse workloads. MEEP is an open source digital laboratory that can provide a future environment for full-stack co-design and pre-silicon exploration. MEEP invites software developers and hardware engineers to build the application, compiler, libraries and the hardware to solve future challenges in the HPC, AI, ML, and DL domains., This work has been supported by the EU H2020 project MareNostrum Experimental Exascale Platform (MEEP), and funded by the European Commission under the grant agreement No. 946002., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Makinote: An FPGA-based HW/SW platform for pre-silicon emulation of RISC-V designs

  • Perdomo Hourné, Elias Augusto
  • Kropotov, Alexander
  • Cano Ladino, Francelly Katherine
  • Ali Shah, Syed Zafar
  • Cervero García, Teresa
  • Martorell Bofill, Xavier
  • Salami, Behzad
Emulating chip functionality before silicon production is crucial, especially with the increasing prevalence of RISC-V-based designs. FPGAs are promising candidates for such purposes due to their high-speed and reconfigurable architecture. In this paper, we introduce our Makinote, an FPGA-based Cluster platform, hosted at Barcelona Supercomputing Center (BSC-CNS), which is composed of a large number of FPGAs (in total 96 AMD/Xilinx Alveo U55c) to emulate massive size RTL designs (up to 750M ASIC cells)1. In addition, we introduce our FPGA shell as a powerful tool to facilitate the utilization of such a large FPGA cluster with minimal effort needed by the designers. The proposed FPGA shell provides an easy-to-use interface for the RTL developers to rapidly port such design into several FPGAs by automatically connecting to the necessary ports, e.g., PCIe Gen4, DRAM (DDR4 and HBM), ETH10g/100g. Moreover, specific drivers for exploiting RISC-V based architectures are provided within the set of tools associated with the FPGA shell. We release the tool online for further extensions.2 We validate the efficiency of our hardware platform (i.e., FPGA cluster) and the software tool (i.e., FPGA Shell) by emulating a RISC-V processor and experimenting HPC Challenge application running on 32 FPGAs. Our results demonstrate that the performance improves by 8 times over the single-FPGA case., This work has received funding from the MEEP project (European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002), from ”Lenovo-BSC Contract-Framework (2022)”, from the Spanish Government (PID2019-107255GB-C21/AEI /10.13039/501100011033, CEX2021-001148-S funded by MCIN/AEI / 10.13039/501100011033), and from Generalitat de Catalunya (contract 2021-SGR-01007)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Coyote: an open source simulation tool to enable RISC-V in HPC

  • Pérez, Borja
  • Fell, Alexander
  • Davis, John D.
The confluence of technology trends and economics has reincarnated computer architecture and specifically, software-hardware co-design. We are entering a new era of a completely open ecosystem, from applications to chips and everything in between. The software-hardware co-design of supercomputers for tomorrow requires flexible tools today that will take us to the Exascale and beyond. The MareNostrum Experimental Exascale Platform (MEEP) addresses this by proposing a flexible FPGA-based emulation platform, designed to explore hardware-software co-designs for future RISC-V supercomputers. This platform is part of an open ecosystem, allowing its infrastructure to be reused in other projects. MEEP's inaugural emulated system will be a RISC- V based self-hosted HPC vector and systolic array accelerator, with a special aim at efficient data movement. Early development stages for such an architecture require fast, scalable and easy to modify simulation tools, with the right granularity and fidelity, enabling rapid design space exploration. Being a part of MEEP, this paper introduces Coyote, a new open source, execution-driven simulator based on the open source RISC- VISA and which can provide detailed insights at various levels and granularities. Coyote focuses on data movement and the modelling of the memory hierarchy of the system, which is one of the main hurdles for high performance sparse workloads, while omitting lower level details. As a result, performance evaluation shows that Coyote achieves an aggregate simulation of up to 6 MIPS when modelling up to 128 cores. This enables the fast comparison of different designs for future RISC- V based HPC architectures., The MEEP project has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from the European Union’s Horizon 2020 research and innovation program and Spain, Croatia, and Turkey., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Accelerating SpMV on FPGAs through block-row compress: a task-based approach

  • Oliver Segura, José
  • Álvarez Martínez, Carlos
  • Cervero García, Teresa
  • Martorell Bofill, Xavier
  • Davis, John D.
  • Ayguadé Parra, Eduard
Sparse Matrix-Vector multiplication (SpMV), computing y=α⋅A×x+β⋅y where y,x are dense vectors, α,β two scalar constants, and A is a sparse matrix, is a key kernel in many HPC applications. It exhibits a kind of memory access that is extremely hard to perform efficiently, due to its random access. In this paper, we present a new approach to accelerate SpMV on FPGAs. As FPGAs lack a default memory hierarchy, they can adapt to specific applications better. Also, an increasing number of FPGAs include High Bandwidth Memory (HBM), making the SpMV problem especially appealing to tackle on these kind of devices. We define a new sparse matrix encoding format (b8c) and its corresponding SpMV implementation using OmpSs@FPGA and HLS. This format allows us to leverage many of the FPGA strengths for intensive data processing, such as data streaming, customizable datapaths widths, parallel memory access for off-chip memory in the case of multiple memory channels (like in HBM), parallel memory access for on-chip memory and pipelining. We tested our proposal for both DDR and HBM memories to show the adaptability and scalability of our design. The presented b8c SpMV implementation is able to achieve higher performance than the state-of-the-art FPGA implementation of SpMV over all the matrices in the data set, achieving 3.52x performance on average with a minimum of 1.82x and a maximum of 6.28x even when running at 75% the frequency., This work has received funding from the MEEP project (European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002), from ”Lenovo-BSC Contract-Framework (2022)”, from the Spanish Government (PID2019-107255GB-C21/AEI /10.13039/501100011033, CEX2021-001148-S funded by MCIN/AEI / 10.13039/501100011033), and from Generalitat de Catalunya (contract 2021-SGR-01007)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Challenges and opportunities for RISC-V architectures towards genomics-based workloads

  • Gómez Sánchez, Gonzalo
  • Call Barreiro, Erin
  • Teruel García, Xavier
  • Alonso Parrilla, Lorena
  • Morán Castany, Ignasi
  • Pérez Elena, Miguel Ángel
  • Torrents Arenales, David
  • Berral García, Josep Lluís
The use of large-scale supercomputing architectures is a hard requirement for scientific computing Big-Data applications. An example is genomics analytics, where millions of data transformations and tests per patient need to be done to find relevant clinical indicators. Therefore, to ensure open and broad access to high-performance technologies, governments, and academia are pushing toward the introduction of novel computing architectures in large-scale scientific environments. This is the case of RISC-V, an open-source and royalty-free instruction-set architecture. To evaluate such technologies, here we present the Variant-Interaction Analytics use case benchmarking suite and datasets. Through this use case, we search for possible genetic interactions using computational and statistical methods, providing a representative case for heavy ETL (Extract, Transform, Load) data processing. Current implementations are implemented in x86-based supercomputers (e.g. MareNostrum-IV at the Barcelona Supercomputing Center (BSC)), and future steps propose RISC-V as part of the next MareNostrum generations. Here we describe the Variant Interaction Use Case, highlighting the characteristics leveraging high-performance computing, indicating the caveats and challenges towards the next RISC-V developments and designs to come from a first comparison between x86 and RISC-V architectures on real Variant Interaction executions over real hardware implementations., This work has been partially financed by the European Commission (EU-HORIZON NEARDATA GA.101092644, VITAMIN-V GA.101093062), the MEEP Project which received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 946002. The JU receives support from the European Union’s Horizon 2020 research and innovation program and Spain, Croatia and Turkey. Also by the Spanish Ministry of Science (MICINN) under scholarship BES-2017-081635, the Research State Agency (AEI) and European Regional Development Funds (ERDF/FEDER) under DALEST grant agreement PID2021-126248OBI00, MCIN/AEI/10.13039/ 501100011033/FEDER and PID GA PID2019-107255GB-C21, and the Generalitat de Catalunya (AGAUR) under grant agreements 2021-SGR-00478, 2021-SGR-01626 and ”FSE Invertint en el teu futur”., Peer Reviewed, Postprint (author's final draft)