Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

An Equilibrated Flux A Posteriori Error Estimator for Defeaturing Problems

  • Buffa, Annalisa
  • Chanon, Ondine Chanon
  • Grappein, Denise
  • Vázquez Hernández, Rafael
  • Vohralik, Martin
An a posteriori error estimator based on an equilibrated flux reconstruction is proposed for defeaturing problems in the context of finite element discretizations. Defeaturing consists in the simplification of a geometry by removing features that are considered not relevant for the approximation of the solution of a given PDE. In this work, the focus is on a Poisson equation with Neumann boundary conditions on the feature boundary. The estimator accounts both for the so-called defeaturing error and for the numerical error committed by approximating the solution on the defeatured domain. Unlike other estimators that were previously proposed for defeaturing problems, the use of the equilibrated flux reconstruction allows us to obtain a sharp bound for the numerical component of the error. Furthermore, it does not require the evaluation of the normal trace of the numerical flux on the feature boundary: this makes the estimator well suited for finite element discretizations, in which the normal trace of the numerical flux is typically discontinuous across elements. The reliability of the estimator is proven and verified on several numerical examples. Its capability to identify the most relevant features is also shown, in anticipation of a future application to an adaptive strategy.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

A New Approach in the Design of Microstructured Ultralight Components to Achieve Maximum Functional Performance

  • Calleja Ochoa, Amaia
  • González Barrio, Haizea
  • López de Lacalle Marcaide, Luis Norberto
  • Martínez Rodríguez, Silvia
  • Albizuri Irigoyen, Joseba
  • Lamikiz Mentxaka, Aitzol
In the energy and aeronautics industry, some components need to be very light but with high strength. For instance, turbine blades and structural components under rotational centrifugal forces, or internal supports, ask for low weight, and in general, all pieces in energy turbine devices will benefit from weight reductions. In space applications, a high ratio strength/weight is even more important. Light components imply new optimal design concepts, but to be able to be manufactured is the real key enable technology. Additive manufacturing can be an alternative, applying radical new approaches regarding part design and components’ internal structure. Here, a new approach is proposed using the replica of a small structure (cell) in two or three orders of magnitude. Laser Powder Bed Fusion (L-PBF) is one of the most well-known additive manufacturing methods of functional parts (and prototypes as well), for instance, starting from metal powders of heat-resistant alloys. The working conditions for such components demand high mechanical properties at high temperatures, Ni-Co superalloys are a choice. The work here presented proposes the use of “replicative” structures in different sizes and orders of magnitude, to manufacture parts with the minimum weight but achieving the required mechanical properties. Printing process parameters and mechanical performance are analyzed, along with several examples., Thanks are owed to H2020-FETOPEN-2018-2019-2020-01 ADAM2 PROJECT Analysis, Design, And Manufacturing using Microstructures and Authors are grateful to Basque government group IT IT1337-19 and the Ministry of Mineco REF DPI2016-74845-R, PID2019-109340RB-I00, KK-2020/00102, KK-2020/00042 and PID2019-104488RB-I00.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools -- Part I: modeling and simulation

  • Bo, P.
  • Gonzalez, H.
  • Calleja, A.
  • Lopez de Lacalle, N.
  • Barton, M.
A new category of 5-axis flank computer numerically controlled (CNC) machining, called \emph{double-flank}, is presented. Instead of using a predefined set of milling tools, we use the shape of the milling tool as a free parameter in our optimization-based approach and, for a given input free-form (NURBS) surface, compute a custom-shaped tool that admits highly-accurate machining. Aimed at curved narrow regions where the tool may have double tangential contact with the reference surface, like spiral bevel gears, the initial trajectory of the milling tool is estimated by fitting a ruled surface to the self-bisector of the reference surface. The shape of the tool and its motion then both undergo global optimization that seeks high approximation quality between the input free-form surface and its envelope approximation, fairness of the motion and the tool, and prevents overcutting. That is, our double-flank machining is meant for the semi-finishing stage and therefore the envelope of the motion is, by construction, penetration-free with the references surface. Our algorithm is validated by a commercial path-finding software and the prototype of the tool for a specific gear model is 3D printed., RYC-2017-22649 BERC 2014-2017
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Reparameterization of ruled surfaces: toward generating smooth jerk-minimized toolpaths for multi-axis flank CNC milling

  • Hashemian, A.
  • Bo, P.
  • Barton, M.
This paper presents a novel jerk minimization algorithm in the context of multi-axis flank CNC machining. The toolpath of the milling axis in a flank milling process, a ruled surface, is reparameterized by a B-spline function, whose control points and knot vector are unknowns in an optimization-based framework. The total jerk of the tool's motion is minimized, implying the tool is moving as smooth as possible, without changing the geometry of the given toolpath. Our initialization stage stems from measuring the ruling distance metric (RDM) of the ruled surface. We show on several examples that this initialization reliably finds close initial guesses of jerk-minimizers and is also computationally efficient. The applicability of the presented approach is illustrated by some practical case studies., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Characterizing envelopes of moving rotational cones and applications in CNC machining

  • Skopenkov, M.
  • Bo, P.
  • Barton, M.
  • Pottmann, H.
Motivated by applications in CNC machining, we provide a characterization of surfaces which are enveloped by a one-parametric family of congruent rotational cones. As limit cases, we also address ruled surfaces and their offsets. The characterizations are higher order nonlinear PDEs generalizing the ones by Gauss and Monge for developable surfaces and ruled surfaces, respectively. The derivation includes results on local approximations of a surface by cones of revolution, which are expressed by contact order in the space of planes. To this purpose, the isotropic model of Laguerre geometry is used as there rotational cones correspond to curves (isotropic circles) and higher order contact is computed with respect to the image of the input surface in the isotropic model. Therefore, one studies curve-surface contact that is conceptually simpler than the surface-surface case. We show that, in a generic case, there exist at most six positions of a fixed rotational cone that have third order contact with the input surface. These results are themselves of interest in geometric computing, for example in cutter selection and positioning for flank CNC machining., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Manufacturing of screw rotors via 5-axis double-flank CNC machining

  • Bizzarri, M.
  • Barton, M.
We investigate a recently introduced methodology for 5-axis flank computer numerically controlled (CNC) machining, called double-flank milling [1]. We show that screw rotors are well suited for this manufacturing approach where the milling tool possesses tangential contact with the material block on two sides, yielding a more efficient variant of traditional flank milling. While the tool's motion is determined as a helical motion, the shape of the tool and its orientation with respect to the helical axis are unknowns in our optimization-based approach. We demonstrate our approach on several rotor benchmark examples where the pairs of envelopes of a custom-shaped tool meet high machining accuracy., RYC-2017-22649 KAUST-BRF grant nr. 3989
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The Construction of Conforming-to-shape Truss Lattice Structures via 3D Sphere Packing

  • van Sosin, B.
  • Rodin, D.
  • Sliusarenko, H.
  • Barton, M.
  • Elber, G.
Truss lattices are common in a wide variety of engineering applications, due to their high ratio of strength versus relative density. They are used both as the interior support for other structures, and as structures on their own. Using 3D sphere packing, we propose a set of methods for generating truss lattices that fill the interior of B-rep models, polygonal or (trimmed) NURBS based, of arbitrary shape. Once the packing of the spheres has been established, beams between the centers of adjacent spheres are constructed, as spline based B-rep geometry. We also demonstrate additional capabilities of our methods, including connecting the truss lattice to (a shell of) the B-rep model, as well as constructing a tensor-product trivariate volumetric representation of the truss lattice - an important step towards direct compatibility for analysis., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Definition of tailor made cutting tools for machining of complex surfaces based on final surface shape

  • Gomez, G.
  • De Lucio, P.
  • Gonzalez, H.
  • de Lacalle, N.
  • Calleja, A.
  • Barton, M.
In this work a design methodology to define the best geometry of cutting tool for complex surfaces is defined, being based on the final part surface geometry. The manufacture of components with tailor made shaped tools, based on algorithm calculation and adapted to the geometry of the final piece surface, reduces manufacturing time and maintains piece quality in comparison with traditional cutting tools. Cutting tools are usually cylindrical (end mills) or ball-end mills. With mathematical algorithms can be defined diamond & CBN electroplated form tools, multi-tooth endmills, abrasive grinding tools and so on. The approach here presented can enable the production of tools for manufacturing process such as Super Abrasive Machining (SAM) and Flank milling strategies. Comparison between standard tools and traditional machining processes versus custom-shaped tools was studied in terms of process time. Final applications are numerous, such as, integral blade rotors, spiral bevel gears, blisks and impellers, complex screws, and others.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Geometry and tool motion planning for curvature adapted CNC machining

  • Barton, M.
  • Bizzarri, M.
  • Rist, F.
  • Sliusarenko, O.
  • Pottmann, H.
CNC machining is the leading subtractive manufacturing technology. Although it is in use since decades, it is far from fully solved and still a rich source for challenging problems in geometric computing. We demonstrate this at hand of 5-axis machining of freeform surfaces, where the degrees of freedom in selecting and moving the cutting tool allow one to adapt the tool motion optimally to the surface to be produced. We aim at a high-quality surface finish, thereby reducing the need for hard-to-control post-machining processes such as grinding and polishing. Our work is based on a careful geometric analysis of curvature-adapted machining via so-called second order line contact between tool and target surface. On the geometric side, this leads to a new continuous transition between “dual” classical results in surface theory concerning osculating circles of surface curves and oscu- lating cones of tangentially circumscribed developable surfaces. Practically, it serves as an effective basis for tool motion planning. Unlike previous approaches to curvature-adapted machining, we solve locally optimal tool positioning and motion planning within a single optimization framework and achieve curvature adaptation even for convex surfaces. This is possible with a toroidal cutter that contains a negatively curved cutting area. The effectiveness of our approach is verified at hand of digital models, simulations and machined parts, including a comparison to results generated with commercial software.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped tools – Part II: physical validations and experiments

  • Gomez, G.
  • Bo, P.
  • Gonzalez, H.
  • Calleja, A.
  • Barton, M.
  • Lopez de Lacalle, N.
Recently, a new methodology for 5-axis flank computer numerically controlled (CNC) machining, called double-flank machining, has been introduced (see “5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools–Part I: Modeling and simulation”). Certain geometries, such as curved teeth of spiral bevel gear, admit this approach where the machining tool has tangential contact with the material block on two sides, yielding a more efficient variant of flank machining. To achieve high machining accuracy, the path-planning algorithm, however, does not look only for the path of the tool, but also for the shape of the tool itself. The proposed approach is validated by series of physical experiments using an abrasive custom-shaped tool specifically designed for a particular type of a spiral bevel gear. The potential of this new methodology is shown in the semifinishing stage of gear manufacturing, where it outperforms traditional ball end milling by an order of magnitude in terms of machining time, while keeping, or even improving, the machining error., RYC-2017-22649 KK-2020/00102
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Curve-guided 5-axis CNC flank milling of free-form surfaces using custom-shaped tools

  • Rajain, K.
  • Sliusarenko, O.
  • Bizzarri, M.
  • Barton, M.
A new method for 5-axis flank milling of free-form surfaces is proposed. Existing flank milling path-planning methods typically use on-market milling tools whose shape is cylindrical or conical, and is therefore not well-suited for meeting fine tolerances for manufacturing of benchmark free-form surfaces like turbine blades, gears, or blisks. In contrast, our optimization-based framework incorporates the shape of the tool into the optimization cycle and looks not only for the milling paths, but also for the shape of the tool itself. Given a free-form reference surface and a guiding path that roughly indicates the motion of the milling tool, tangential movability of quadruplets of spheres centered along a straight line is analyzed to indicate possible shapes and their motions. This results in $G^1$ Hermite data in the space of rigid body motions that are interpolated and further optimized, both in terms of the motion and the shape of the milling tool itself. We demonstrate our algorithm on synthetic free-form surfaces and industrial benchmark datasets, showing that the use of custom-shaped tools is capable of meeting fine industrial tolerances and outperforms the use of classical, on-market tools., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Efficient 5-axis CNC trochoidal flank milling of 3D cavities using custom-shaped cutting tools

  • Bo, P.
  • Fan, H.
  • Barton, M.
A novel method for trochoidal flank milling of 3D cavities bounded by free-form surfaces is proposed. Existing 3D trochoidal milling methods use on-market milling tools whose shape is typically cylindrical or conical, and is therefore not well-suited for meeting fine milling tolerances required for finishing of benchmark free-form surfaces like blades or blisks. In contrast, our variational framework incorporates the shape of the tool into the optimization cycle and looks not only for the trochoidal milling paths, but also for the shape of the tool itself. High precision quality is ensured by firstly designing flank milling paths for the side surfaces that delimit the motion space, in which the trochoidal milling paths are further computed. Additionally, the material removal rate is maximized with the cutter-workpiece engagement being constrained under a given tolerance. Our framework also supports multi-layer approach that is necessary to handle deep cavities. The ability and efficacy of the proposed method are demonstrated by several industrial benchmarks, showing that our approach meets fine machining tolerances using only a few trochoidal paths., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Machining-induced characteristics of microstructure-supported LPBF-IN718 curved thin walls

  • Mishra, S.
  • Escudero, G.
  • Gonzalez, H.
  • Calleja, A.
  • Martinez, S.
  • Barton, M.
  • Lopez de Lacalle, N.
  • Mishra
The microstructure-supported design of engineering components is recently gaining attention due to their high strength-to-weight and high stiffness-to-weight properties. The present study investigates the hybrid manufacturing of Inconel 718 curved thin walls with internal microstructural supports fabricated by laser powder bed fusion (LPBF). Printed walls contain a fixed curvature and thickness, whereas the internal microstructures were varied at different inclination angles. In this research, a finish milling operation has been performed at different milling parameters. Machining-induced damages on the internal microstructures have been studied and correlated with geometrical deviation and surface integrity features on the outer thin wall surfaces.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Screw rotor manufacturing via 5-axis flank CNC machining using conical tools

  • Bizzarri, M.
  • Bo, P.
  • Barton, M.
We propose a new method for 5-axis flank computer numerically controlled (CNC) machining of screw rotors using conical tools. The flanks of screw rotors consist of helical surfaces, which predetermines the motion of the milling tool and reduces the search space for tool positioning to only 4-parametric family, which allows a quick search for good initial positions of a given conical tool. We initialize the search by looking at second order line contact between the tool and the helical flank of the rotor. Several positions of the tool are found, covering major part of the flank of the rotor, followed by global optimization that further reduces the tool-surface error and makes sure that there are no gaps between neighboring sweeps of the tool. We demonstrate our approach on several benchmark screw rotors, showing that our approach meets fine industrial tolerances with only few sweeps of the tool., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards

G^1
  • Rajain, K.
  • Bizzarri, M.
  • Lavicka, M.
  • Kosinka, J.
  • Barton, M.
Existing flank milling path-planning methods typically lead to tiny gaps or overlaps between neighboring paths, which causes artifacts and imperfections in the workpiece. We propose a new multi-strip path-planning method for 5-axis flank milling of free-form surfaces which targets $G^1$ (tangent-plane) continuity of the neighboring strips along shared boundaries. While for some geometries one cannot achieve $G^1$ continuity and high approximation quality at the same time, our optimization framework offers a good trade-off between machining accuracy in terms of distance error and the $G^1$ connection of neighboring strips. We demonstrate our algorithm on synthetic free-form surfaces as well as on industrial benchmark datasets, showing that we are able to meet fine industrial tolerances and simultaneously significantly reduce the kink angle of adjacent strips, and consequently to improve the surface finish in terms of smoothness.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Constant probe orientation for fast contact-based inspection of 3D free-form surfaces using (3+2)-axis inspection machines

  • Sliusarenko, O.
  • Gomez Escudero, G.
  • Gonzalez, H.
  • Calleja, A.
  • Barton, M.
  • Ortega, N.
  • Lopez de Lacalle, N.
A new probe optimization method for contact based (3+2)-axis inspection machines is proposed. Given an inspection path of a stylus on a free-form surface, an optimal orientation of the stylus is computed such that (i) the inclination angle of the stylus is within a given angular range with respect to the surface normal, (ii) the motion of the stylus is globally collision free, and (iii) the stylus remains constant in the coordinate system of the measuring machine. The last condition guarantees that the inspection motion requires only the involvement of the three translational axes of the measuring machine. The numerical simulations were validated through physical experiments on a testcase of a tooth of a bevel gear due to the surface complexity and probe accessibility. This optimized method was compared to 3-axis and 5-axis inspection strategies, showing that the fixed (3+2)-axis stylus returns more accurate inspection results compared to the traditional 3-axis approach and similar to 5-axis approach., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On C0 and C1 continuity of envelopes of rotational solids and its application to 5-axis CNC machining

  • Ponce Vanegas, F.
  • Bizzarri, M.
  • Barton, M.
We study the smoothness of envelopes generated by motions of rotational rigid bodies in the context of 5-axis Computer Numerically Controlled (CNC) machining. A moving cutting tool, conceptualized as a rotational solid, forms a surface, called envelope, that delimits a part of 3D space where the tool engages the material block. The smoothness of the resulting envelope depends both on the smoothness of the motion and smoothness of the tool. While the motions of the tool are typically required to be at least C2, the tools are frequently only C0 continuous, which results in discontinuous envelopes. In this work, we classify a family of instantaneous motions that, in spite of only C0 continuous shape of the tool, result in C0 continuous envelopes. We show that such motions are flexible enough to follow a free-form surface, preserving tangential contact between the tool and surface along two points, therefore having applications in shape slot milling or in a semi-finishing stage of 5-axis flank machining. We also show that C1 tools and motions still can generate smooth envelopes., Juan de la Cierva - Formation [grant number FJC2019-039804-I] Ram\ón y Cajal fellowship RYC-2017-22649.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Collision-free tool motion planning for 5-axis CNC machining with toroidal cutters

  • Reckova, A.
  • Zaragoza, J.
  • Bizzarri, M.
  • Barton, M.
Collision detection is a crucial part of CNC machining, however, many state-of-the-art algorithms test collisions as a post-process, after the path-planning stage, or use conservative approaches that result in low machining accuracy in the neighborhood of the cutter’s contact paths. We propose a fast collision detection test that does not require a costly construction of the configuration space nor high-resolution sampling of the cutter’s axis and uses the information of the neighboring points to efficiently prune away points of the axis that cannot cause collisions. The proposed collision detection test is incorporated directly as a part of the tool motion-planning stage, enabling design of highly-accurate motions of a toroidal cutting tool along free-form geometries. We validate our algorithm on a variety of benchmark surfaces, showing that our results provide high-quality approximations with provably non-colliding motions.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Design, motion-planning, and manufacturing of custom-shaped tools for 5-axis super abrasive machining of a turbomachinary blade like component

  • Martinez, M.
  • Gomez, G.
  • Bo, P.
  • Barton, M.
  • Gonzalez, H.
  • Calleja, A.
  • López de Lacalle, L.N.
Free-form surfaces generated by Non-Uniform Rational B-Splines (NURBS) are evolving to face turbomachinery components requirements, such as turbine blades to enhanced efficiency. Super Abrasive Machining (SAM) is presented as a potential process for high-added value components using custom-shaped tools to be adapted to any surface. The adaptability and flexibility of these tool concepts are specifically designed to fit these complex surfaces. This paper presents an innovative manufacturing approach for blade type components using a custom-shaped tool designed through an optimization process that simultaneously optimizes both the shape of the tool and its motion. The proposed method with SAM finishing using a custom-shaped tool is compared against a standard tool and traditional machining process. The result obtained on the blade test case show that the custom-shaped tools need fewer paths, yet produce more accurate surface finish.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On tiling spherical triangles into quadratic subpatches

  • Vrsek, J.
  • Bizzarri, M.
  • Lavicka, M.
  • Barton, M.
  • Kosinka, J.
Various interpolation and approximation methods arising in several practical applications in geometric modeling deal, at a particular step, with the problem of computing suitable rational patches (of low degree) on the unit sphere. Therefore, we are concerned with the construction of a system of spherical triangular patches with prescribed vertices that globally meet along common boundaries. In particular, we investigate various possibilities for tiling a given spherical triangular patch into quadratically parametrizable subpatches. We revisit the condition that the existence of a quadratic parameterization of a spherical triangle is equivalent to the sum of the interior angles of the triangle being pi, and then circumvent this limitation by studying alternative scenarios and present constructions of spherical macro-elements of the lowest possible degree. Applications of our method include algorithms relying on the construction of (interpolation) surfaces from prescribed rational normal vector fields., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On design, analysis, and hybrid manufacturing of microstructured blade-like geometries

  • Antolin, P.
  • Bonneau, G.-P.
  • Buffa, A.
  • Calleja, A.
  • Elber, G.
  • Elgeti, S.
  • Escudero, G.
  • Gonzalez, A.
  • Gonzalez, H.
  • Hahmann, S.
  • Hirschler, T.
  • Hong, Q.-Y.
  • Key, K.
  • Kim, M.-S.
  • Kofler, M.
  • de Lacalle, N.
  • de la Maza, S.
  • Barton, M.
  • Zwar, J.
  • Rajain, K.
With the evolution of new manufacturing technologies such as multi-material 3D printing, one can think of new type of objects that consist of considerably less, yet heterogeneous, material, consequently being porous, lighter and cheaper, while having the very same functionality as the original object when manufactured from one single solid material. We aim at questioning five decades of traditional paradigms in geometric CAD and focus at new generation of CAD objects that are not solid, but contain heterogeneous free-form internal microstructures. We propose a unified manufacturing pipeline that involves all stages, namely design, optimization, manufacturing, and inspection of microstructured free-form geometries. We demonstrate our pipeline on an industrial test case of a blisk blade that sustains the desired pressure limits, yet requires significantly less material when compared to the solid counterpart.