Pasar al contenido principal

FABRICACION DE OBJETOS CURVOS MEDIANTE EL DISEÑO DE TRAYECTORIAS DE HERRAMIENTAS PERSONALIZADAS

PID2019-104488RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario ASOC BCAM - BASQUE CENTER FOR APPLIED MATHEMATICS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Manufacturing of screw rotors via 5-axis double-flank CNC machining

  • Bizzarri, M.
  • Barton, M.
We investigate a recently introduced methodology for 5-axis flank computer numerically controlled (CNC) machining, called double-flank milling [1]. We show that screw rotors are well suited for this manufacturing approach where the milling tool possesses tangential contact with the material block on two sides, yielding a more efficient variant of traditional flank milling. While the tool's motion is determined as a helical motion, the shape of the tool and its orientation with respect to the helical axis are unknowns in our optimization-based approach. We demonstrate our approach on several rotor benchmark examples where the pairs of envelopes of a custom-shaped tool meet high machining accuracy., RYC-2017-22649 KAUST-BRF grant nr. 3989
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Geometry and tool motion planning for curvature adapted CNC machining

  • Barton, M.
  • Bizzarri, M.
  • Rist, F.
  • Sliusarenko, O.
  • Pottmann, H.
CNC machining is the leading subtractive manufacturing technology. Although it is in use since decades, it is far from fully solved and still a rich source for challenging problems in geometric computing. We demonstrate this at hand of 5-axis machining of freeform surfaces, where the degrees of freedom in selecting and moving the cutting tool allow one to adapt the tool motion optimally to the surface to be produced. We aim at a high-quality surface finish, thereby reducing the need for hard-to-control post-machining processes such as grinding and polishing. Our work is based on a careful geometric analysis of curvature-adapted machining via so-called second order line contact between tool and target surface. On the geometric side, this leads to a new continuous transition between “dual” classical results in surface theory concerning osculating circles of surface curves and oscu- lating cones of tangentially circumscribed developable surfaces. Practically, it serves as an effective basis for tool motion planning. Unlike previous approaches to curvature-adapted machining, we solve locally optimal tool positioning and motion planning within a single optimization framework and achieve curvature adaptation even for convex surfaces. This is possible with a toroidal cutter that contains a negatively curved cutting area. The effectiveness of our approach is verified at hand of digital models, simulations and machined parts, including a comparison to results generated with commercial software.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped tools – Part II: physical validations and experiments

  • Gomez, G.
  • Bo, P.
  • Gonzalez, H.
  • Calleja, A.
  • Barton, M.
  • Lopez de Lacalle, N.
Recently, a new methodology for 5-axis flank computer numerically controlled (CNC) machining, called double-flank machining, has been introduced (see “5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools–Part I: Modeling and simulation”). Certain geometries, such as curved teeth of spiral bevel gear, admit this approach where the machining tool has tangential contact with the material block on two sides, yielding a more efficient variant of flank machining. To achieve high machining accuracy, the path-planning algorithm, however, does not look only for the path of the tool, but also for the shape of the tool itself. The proposed approach is validated by series of physical experiments using an abrasive custom-shaped tool specifically designed for a particular type of a spiral bevel gear. The potential of this new methodology is shown in the semifinishing stage of gear manufacturing, where it outperforms traditional ball end milling by an order of magnitude in terms of machining time, while keeping, or even improving, the machining error., RYC-2017-22649 KK-2020/00102
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Curve-guided 5-axis CNC flank milling of free-form surfaces using custom-shaped tools

  • Rajain, K.
  • Sliusarenko, O.
  • Bizzarri, M.
  • Barton, M.
A new method for 5-axis flank milling of free-form surfaces is proposed. Existing flank milling path-planning methods typically use on-market milling tools whose shape is cylindrical or conical, and is therefore not well-suited for meeting fine tolerances for manufacturing of benchmark free-form surfaces like turbine blades, gears, or blisks. In contrast, our optimization-based framework incorporates the shape of the tool into the optimization cycle and looks not only for the milling paths, but also for the shape of the tool itself. Given a free-form reference surface and a guiding path that roughly indicates the motion of the milling tool, tangential movability of quadruplets of spheres centered along a straight line is analyzed to indicate possible shapes and their motions. This results in $G^1$ Hermite data in the space of rigid body motions that are interpolated and further optimized, both in terms of the motion and the shape of the milling tool itself. We demonstrate our algorithm on synthetic free-form surfaces and industrial benchmark datasets, showing that the use of custom-shaped tools is capable of meeting fine industrial tolerances and outperforms the use of classical, on-market tools., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Efficient 5-axis CNC trochoidal flank milling of 3D cavities using custom-shaped cutting tools

  • Bo, P.
  • Fan, H.
  • Barton, M.
A novel method for trochoidal flank milling of 3D cavities bounded by free-form surfaces is proposed. Existing 3D trochoidal milling methods use on-market milling tools whose shape is typically cylindrical or conical, and is therefore not well-suited for meeting fine milling tolerances required for finishing of benchmark free-form surfaces like blades or blisks. In contrast, our variational framework incorporates the shape of the tool into the optimization cycle and looks not only for the trochoidal milling paths, but also for the shape of the tool itself. High precision quality is ensured by firstly designing flank milling paths for the side surfaces that delimit the motion space, in which the trochoidal milling paths are further computed. Additionally, the material removal rate is maximized with the cutter-workpiece engagement being constrained under a given tolerance. Our framework also supports multi-layer approach that is necessary to handle deep cavities. The ability and efficacy of the proposed method are demonstrated by several industrial benchmarks, showing that our approach meets fine machining tolerances using only a few trochoidal paths., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Screw rotor manufacturing via 5-axis flank CNC machining using conical tools

  • Bizzarri, M.
  • Bo, P.
  • Barton, M.
We propose a new method for 5-axis flank computer numerically controlled (CNC) machining of screw rotors using conical tools. The flanks of screw rotors consist of helical surfaces, which predetermines the motion of the milling tool and reduces the search space for tool positioning to only 4-parametric family, which allows a quick search for good initial positions of a given conical tool. We initialize the search by looking at second order line contact between the tool and the helical flank of the rotor. Several positions of the tool are found, covering major part of the flank of the rotor, followed by global optimization that further reduces the tool-surface error and makes sure that there are no gaps between neighboring sweeps of the tool. We demonstrate our approach on several benchmark screw rotors, showing that our approach meets fine industrial tolerances with only few sweeps of the tool., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Solving boundary value problems via the Nyström method using spline Gauss rules

  • Hashemian, A.
  • Sliusarenko, H.
  • Remogna, S.
  • Barrera, D.
  • Barton, M.
We propose to use spline Gauss quadrature rules for solving boundary value problems (BVPs) using the Nyström method. When solving BVPs, one converts the corresponding partial differential equation inside a domain into the Fredholm integral equation of the second kind on the boundary in the sense of boundary integral equation (BIE). The Fredholm integral equation is then solved using the Nyström method, which involves the use of a particular quadrature rule, thus, converting the BIE problem to a linear system. We demonstrate this concept on the 2D Laplace problem over domains with smooth boundary as well as domains containing corners. We validate our approach on benchmark examples and the results indicate that, for a fixed number of quadrature points (i.e., the same computational effort), the spline Gauss quadratures return an approximation that is by one to two orders of magnitude more accurate compared to the solution obtained by traditional polynomial Gauss counterparts.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Constant probe orientation for fast contact-based inspection of 3D free-form surfaces using (3+2)-axis inspection machines

  • Sliusarenko, O.
  • Gomez Escudero, G.
  • Gonzalez, H.
  • Calleja, A.
  • Barton, M.
  • Ortega, N.
  • Lopez de Lacalle, N.
A new probe optimization method for contact based (3+2)-axis inspection machines is proposed. Given an inspection path of a stylus on a free-form surface, an optimal orientation of the stylus is computed such that (i) the inclination angle of the stylus is within a given angular range with respect to the surface normal, (ii) the motion of the stylus is globally collision free, and (iii) the stylus remains constant in the coordinate system of the measuring machine. The last condition guarantees that the inspection motion requires only the involvement of the three translational axes of the measuring machine. The numerical simulations were validated through physical experiments on a testcase of a tooth of a bevel gear due to the surface complexity and probe accessibility. This optimized method was compared to 3-axis and 5-axis inspection strategies, showing that the fixed (3+2)-axis stylus returns more accurate inspection results compared to the traditional 3-axis approach and similar to 5-axis approach., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On C0 and C1 continuity of envelopes of rotational solids and its application to 5-axis CNC machining

  • Ponce Vanegas, F.
  • Bizzarri, M.
  • Barton, M.
We study the smoothness of envelopes generated by motions of rotational rigid bodies in the context of 5-axis Computer Numerically Controlled (CNC) machining. A moving cutting tool, conceptualized as a rotational solid, forms a surface, called envelope, that delimits a part of 3D space where the tool engages the material block. The smoothness of the resulting envelope depends both on the smoothness of the motion and smoothness of the tool. While the motions of the tool are typically required to be at least C2, the tools are frequently only C0 continuous, which results in discontinuous envelopes. In this work, we classify a family of instantaneous motions that, in spite of only C0 continuous shape of the tool, result in C0 continuous envelopes. We show that such motions are flexible enough to follow a free-form surface, preserving tangential contact between the tool and surface along two points, therefore having applications in shape slot milling or in a semi-finishing stage of 5-axis flank machining. We also show that C1 tools and motions still can generate smooth envelopes., Juan de la Cierva - Formation [grant number FJC2019-039804-I] Ram\ón y Cajal fellowship RYC-2017-22649.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Learning a logistic regression with the help of unknown features at prediction stage

  • Martinez, M.
  • Inza, I.
  • Lozano, J.A.
The use of features available at training time, but not at prediction time, as additional information for training models is known as learning using privileged information paradigm. In this paper, the handling of privileged features is addressed from the logistic regression perspective, commonly used in the clinical setting. Two new proposals, LOGIT+ and LRPROB+, learned with the influence of privileged features and preserving the interpretability of conventional logistic regression, are proposed. Experimental results on datasets report improvements of our proposals over the performance of traditional logistic regression learned without privileged information.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Collision-free tool motion planning for 5-axis CNC machining with toroidal cutters

  • Reckova, A.
  • Zaragoza, J.
  • Bizzarri, M.
  • Barton, M.
Collision detection is a crucial part of CNC machining, however, many state-of-the-art algorithms test collisions as a post-process, after the path-planning stage, or use conservative approaches that result in low machining accuracy in the neighborhood of the cutter’s contact paths. We propose a fast collision detection test that does not require a costly construction of the configuration space nor high-resolution sampling of the cutter’s axis and uses the information of the neighboring points to efficiently prune away points of the axis that cannot cause collisions. The proposed collision detection test is incorporated directly as a part of the tool motion-planning stage, enabling design of highly-accurate motions of a toroidal cutting tool along free-form geometries. We validate our algorithm on a variety of benchmark surfaces, showing that our results provide high-quality approximations with provably non-colliding motions.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Design, motion-planning, and manufacturing of custom-shaped tools for 5-axis super abrasive machining of a turbomachinary blade like component

  • Martinez, M.
  • Gomez, G.
  • Bo, P.
  • Barton, M.
  • Gonzalez, H.
  • Calleja, A.
  • López de Lacalle, L.N.
Free-form surfaces generated by Non-Uniform Rational B-Splines (NURBS) are evolving to face turbomachinery components requirements, such as turbine blades to enhanced efficiency. Super Abrasive Machining (SAM) is presented as a potential process for high-added value components using custom-shaped tools to be adapted to any surface. The adaptability and flexibility of these tool concepts are specifically designed to fit these complex surfaces. This paper presents an innovative manufacturing approach for blade type components using a custom-shaped tool designed through an optimization process that simultaneously optimizes both the shape of the tool and its motion. The proposed method with SAM finishing using a custom-shaped tool is compared against a standard tool and traditional machining process. The result obtained on the blade test case show that the custom-shaped tools need fewer paths, yet produce more accurate surface finish.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On tiling spherical triangles into quadratic subpatches

  • Vrsek, J.
  • Bizzarri, M.
  • Lavicka, M.
  • Barton, M.
  • Kosinka, J.
Various interpolation and approximation methods arising in several practical applications in geometric modeling deal, at a particular step, with the problem of computing suitable rational patches (of low degree) on the unit sphere. Therefore, we are concerned with the construction of a system of spherical triangular patches with prescribed vertices that globally meet along common boundaries. In particular, we investigate various possibilities for tiling a given spherical triangular patch into quadratically parametrizable subpatches. We revisit the condition that the existence of a quadratic parameterization of a spherical triangle is equivalent to the sum of the interior angles of the triangle being pi, and then circumvent this limitation by studying alternative scenarios and present constructions of spherical macro-elements of the lowest possible degree. Applications of our method include algorithms relying on the construction of (interpolation) surfaces from prescribed rational normal vector fields., RYC-2017-22649