Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Stability of Monoclonal Antibodies as Solid Formulation for Auto-Injectors: A Pilot Study

  • García Villén, Fátima
  • Gallego Garrido, Idoia
  • Sainz Ramos, Myriam
  • Ordoyo Pascual, Jorge
  • Ruiz Alonso, Sandra
  • Sáenz del Burgo Martínez, Laura
  • O’Mahony, Conor
  • Pedraz Muñoz, José Luis
Drug adherence is a significant medical issue, often responsible for sub-optimal outcomes during the treatment of chronic diseases such as rheumatoid or psoriatic arthritis. Monoclonal antibodies (which are exclusively given parenterally) have been proven to be an effective treatment in these cases. The use of auto-injectors is an effective strategy to improve drug adherence in parenteral treatments since these pen-like devices offer less discomfort and increased user-friendliness over conventional syringe-based delivery. This study aims to investigate the feasibility of including a monoclonal antibody as a solid formulation inside an auto-injector pen. Specifically, the objective was to evaluate the drug stability after a concentration (to reduce the amount of solvent and space needed) and freeze-drying procedure. A preliminary screening of excipients to improve stability was also performed. The nano-DSC results showed that mannitol improved the stability of the concentrated, freeze-dried antibody in comparison to its counterpart without it. However, a small instability of the CH2 domain was still found for mannitol samples, which will warrant further investigation. The present results serve as a stepping stone towards advancing future drug delivery systems that will ultimately improve the patient experience and associated drug adherence., This research is part of the Moore4Medical project funded by the ECSEL Joint Undertaking (grant number H2020-ECSEL-2019-IA-876190) and the Basque Country Government (Grupos consolidados IT1448-22). The participation of author S.R.-A. is supported by a Ph.D fellowship (PRE_2022_2_0144) also granted by the Basque Country Government.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

A compelet design procedure of an X-band MMIC Class-J Power Amplifier

  • Sajedin, Maryam
  • Elfergani, Issa
  • Rodriguez, Jonathan
  • Abd-Alhameed, Raed
  • Fernández Barciela, Mónica
This work presents a complete design process of a high-gain MMIC Class-J power amplifier (PA) based on the 0.25−μm A1GaAs-InGaAs pHEMT technology at X-Band frequencies. The proposed technique can reduce the chip area and improve the energy efficiency. The simulation results indicate that the designed Class-J PA at 6V operation voltage achieves 18dB power gain, 56% PAE and output power of 27.6dBm at 1dB compression. The area size of two-stages PA is 0.9mm2 ., Fundação para a Ciência e a Tecnologia | Ref. UIDB/50008/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50008/2020, Fundação para a Ciência e a Tecnologia | Ref. POCI-01-0145-FEDER-030500, Fundação para a Ciência e a Tecnologia | Ref. ECSEL/0006/2019, Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond mobile phone displays: Flat panel display technology for biomedical applications

  • Mameli, Alfredo
  • Akkerman, Hylke B.
  • González-Lana, Sandra
  • Castro-Abril, Héctor
  • Le Cann, Kim
  • Lampert, Angelika
  • Gelinck, Gerwin H.
  • Kronemeijer, Auke Jisk
  • Breemen, Albert J.J.M. van
Organ-on-Chips (OoCs) have emerged as a human-specific experimental platform for preclinical research and therapeutics testing that will reduce the cost of pre-clinical drug development, provide better physiological relevance and replace animal testing. Yet, the lack of standardization and cost-effective fabrication technologies can hamper wide-spread adoption of OoCs. In this work we validate the use of flat panel display (FPD) technology as an enabling and cost-effective technology platform for biomedical applications by demonstrating facile integration of key OoC modules like microfluidics and micro electrode arrays (MEAs) in the standardized 96-well plate format. Individual and integrated modules were tested for their biological applicability in OoCs. For microelectrode arrays we demonstrate 90–95% confluency, 3 days after cell seeding and >70% of the initial mitochondrial cell activity for microfluidic devices. Thus highlighting the biocompatibility of these modules fabricated using FPD technology. Furthermore, we provide two examples of monolithically integrated microfluidics and microelectronics, i.e. integrated electronic valves and integrated MEAs, that showcase the strength of FPD technology applied to biomedical device fabrication. Finally, the merits and opportunities provided by FPD technology are discussed through examples of advanced structures and functionalities that are unique to this enabling platform., Part of this work is funded by the ECSEL JU Moore 4 Medical project, receiving funding under grant agreement H2020 ECSEL 2019 IA 876190., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface modifications of COP-based microfluidic devices for improved immobilisation of hydrogel proteins: long-term 3D culture with contractile cell types and ischaemia model

  • González-Lana, Sandra
  • Randelovic, Teodora
  • Ciriza, Jesús
  • López-Valdeolivas, María
  • Monge, Rosa
  • Sánchez-Somolinos, Carlos
  • Ochoa, Ignacio
The tissue microenvironment plays a crucial role in tissue homeostasis and disease progression. However, the in vitro simulation has been limited by the lack of adequate biomimetic models in the last decades. Thanks to the advent of microfluidic technology for cell culture applications, these complex microenvironments can be recreated by combining hydrogels, cells and microfluidic devices. Nevertheless, this advance has several limitations. When cultured in three-dimensional (3D) hydrogels inside microfluidic devices, contractile cells may exert forces that eventually collapse the 3D structure. Disrupting the compartmentalisation creates an obstacle to long-term or highly cell-concentrated assays, which are extremely relevant for multiple applications such as fibrosis or ischaemia. Therefore, we tested surface treatments on cyclic-olefin polymer-based microfluidic devices (COP-MD) to promote the immobilisation of collagen as a 3D matrix protein. Thus, we compared three surface treatments in COP devices for culturing human cardiac fibroblasts (HCF) embedded in collagen hydrogels. We determined the immobilisation efficiency of collagen hydrogel by quantifying the hydrogel transversal area within the devices at the studied time points. Altogether, our results indicated that surface modification with polyacrylic acid photografting (PAA-PG) of COP-MD is the most effective treatment to avoid the quick collapse of collagen hydrogels. As a proof-of-concept experiment, and taking advantage of the low-gas permeability properties of COP-MD, we studied the application of PAA-PG pre-treatment to generate a self-induced ischaemia model. Different necrotic core sizes were developed depending on initial HCF density seeding with no noticeable gel collapse. We conclude that PAA-PG allows long-term culture, gradient generation and necrotic core formation of contractile cell types such as myofibroblasts. This novel approach will pave the way for new relevant in vitro co-culture models where fibroblasts play a key role such as wound healing, tumour microenvironment and ischaemia within microfluidic devices., SGL was funded by a Spanish MINECO fellowship (DI-17-09585). TR studentship was supported by Instituto de Salud Carlos III (i – PFIS IFI16/00050). This work was funded by CDTI (SNEO-20181019), Spanish Government “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) project PID2020-118485RB-I00; “Ministerio de Asuntos Económicos y Transformación Digital – Agencia Estatal de Investigación” through PID2020-118485RB-I00 and PID2021-126051OB-C41 projects. Government of Aragon project LMP221_21, FEDER (EU); through the “Fondo Social Europeo” (DGA T62_20R, E15_20R and E47_20R). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 829010 (PRIME) and from H2020-MSCA-RISE-2017 programme under grant agreement No. 778354 (CISTEM); and also from the Key Digital Technologies Joint Undertaking with 876190., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of mechanical properties and structure of type I collagen hydrogels on colorectal cancer cell migration

  • Castro-Abril, Héctor
  • Heras, Jónathan
  • Barrio, Jesús del
  • Paz, Laura
  • Alcaine, Clara
  • Pérez Aliácar, Marina
  • Garzón-Alvarado, Diego
  • Doblaré, Manuel
  • Ochoa, Ignacio
Mechanical interactions between cells and their microenvironment play an important role in determining cell fate, which is particularly relevant in metastasis, a process where cells invade tissue matrices with different mechanical properties. In vitro, type I collagen hydrogels have been commonly used for modeling the microenvironment due to its ubiquity in the human body. In this work, the combined influence of the stiffness of these hydrogels and their ultrastructure on the migration patterns of HCT-116 and HT-29 spheroids are analyzed. For this, six different types of pure type I collagen hydrogels by changing the collagen concentration and the gelation temperature are prepared. The stiffness of each sample is measured and its ultrastructure is characterized. Cell migration studies are then performed by seeding the spheroids in three different spatial conditions. It is shown that changes in the aforementioned parameters lead to differences in the mechanical stiffness of the matrices as well as the ultrastructure. These differences, in turn, lead to distinct cell migration patterns of HCT-116 and HT-29 spheroids in either of the spatial conditions tested. Based on these results, it is concluded that the stiffness and the ultrastructural organization of the matrix can actively modulate cell migration behavior in colorectal cancer spheroids., This work was supported by the European Union's Moore4Medical project under grant numbers G.A. n° 876190 and PCI2020-112064, and the Republic of Colombia's Ministry of Science (Minciencias) “Convocatoria 785 de Doctorados Nacionales” programme. The experimental tests have been performed by the ICTS “NANBIOSIS”, more specifically by the Tissue & Scaffold Characterization Unit (U13) of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the University of Zaragoza., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Towards novel biomimetic in vitro models of the blood-brain barrier for drug permeability evaluation

  • Mármol, Inés
  • Abizanda-Campo, Sara
  • Ayuso, José M.
  • Ochoa, Ignacio
  • Oliván, Sara
Current available animal and in vitro cell-based models for studying brain-related pathologies and drug evaluation face several limitations since they are unable to reproduce the unique architecture and physiology of the human blood–brain barrier. Because of that, promising preclinical drug candidates often fail in clinical trials due to their inability to penetrate the blood–brain barrier (BBB). Therefore, novel models that allow us to successfully predict drug permeability through the BBB would accelerate the implementation of much-needed therapies for glioblastoma, Alzheimer’s disease, and further disorders. In line with this, organ-on-chip models of the BBB are an interesting alternative to traditional models. These microfluidic models provide the necessary support to recreate the architecture of the BBB and mimic the fluidic conditions of the cerebral microvasculature. Herein, the most recent advances in organ-on-chip models for the BBB are reviewed, focusing on their potential to provide robust and reliable data regarding drug candidate ability to reach the brain parenchyma. We point out recent achievements and challenges to overcome in order to advance in more biomimetic in vitro experimental models based on OOO technology. The minimum requirements that should be met to be considered biomimetic (cellular types, fluid flow, and tissular architecture), and consequently, a solid alternative to in vitro traditional models or animals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Beyond mobile phone displays: Flat panel display technology for biomedical applications

  • Mameli, A.
  • Akkerman, H. B.
  • González-Lana, S.
  • Castro-Abril, H.
  • Le Cann, K.
  • Lampert, A.
  • Gelinck, G. H.
  • Kronemeijer, A. J.
  • van Breemen, A. J. J. M.
Organ-on-Chips (OoCs) have emerged as a human-specific experimental platform for preclinical research and therapeutics testing that will reduce the cost of pre-clinical drug development, provide better physiological relevance and replace animal testing. Yet, the lack of standardization and cost-effective fabrication technologies can hamper wide-spread adoption of OoCs. In this work we validate the use of flat panel display (FPD) technology as an enabling and cost-effective technology platform for biomedical applications by demonstrating facile integration of key OoC modules like microfluidics and micro electrode arrays (MEAs) in the standardized 96-well plate format. Individual and integrated modules were tested for their biological applicability in OoCs. For microelectrode arrays we demonstrate 90–95% confluency, 3 days after cell seeding and >70% of the initial mitochondrial cell activity for microfluidic devices. Thus highlighting the biocompatibility of these modules fabricated using FPD technology. Furthermore, we provide two examples of monolithically integrated microfluidics and microelectronics, i.e. integrated electronic valves and integrated MEAs, that showcase the strength of FPD technology applied to biomedical device fabrication. Finally, the merits and opportunities provided by FPD technology are discussed through examples of advanced structures and functionalities that are unique to this enabling platform.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Role of Mechanical Properties and Structure of Type I Collagen Hydrogels on Colorectal Cancer Cell Migration

  • Castro-Abril, Hector
  • Heras, Jónathan
  • del Barrio, Jesús
  • Paz, Laura
  • Alcaine, Clara
  • Pérez Aliácar, Marina
  • Garzón-Alvarado, Diego
  • Doblaré, Manuel
  • Ochoa, Ignacio
Mechanical interactions between cells and their microenvironment play an important role in determining cell fate, which is particularly relevant in metastasis, a process where cells invade tissue matrices with different mechanical properties. In vitro, type I collagen hydrogels have been commonly used for modeling the microenvironment due to its ubiquity in the human body. In this work, the combined influence of the stiffness of these hydrogels and their ultrastructure on the migration patterns of HCT-116 and HT-29 spheroids are analyzed. For this, six different types of pure type I collagen hydrogels by changing the collagen concentration and the gelation temperature are prepared. The stiffness of each sample is measured and its ultrastructure is characterized. Cell migration studies are then performed by seeding the spheroids in three different spatial conditions. It is shown that changes in the aforementioned parameters lead to differences in the mechanical stiffness of the matrices as well as the ultrastructure. These differences, in turn, lead to distinct cell migration patterns of HCT-116 and HT-29 spheroids in either of the spatial conditions tested. Based on these results, it is concluded that the stiffness and the ultrastructural organization of the matrix can actively modulate cell migration behavior in colorectal cancer spheroids. Las interacciones mecánicas entre las células y su microambiente juegan un papel importante en la determinación del destino celular, lo cual es particularmente relevante en la metástasis, un proceso en el que las células invaden matrices tisulares con diferentes propiedades mecánicas. In vitro, los hidrogeles de colágeno tipo I se han utilizado comúnmente para modelar el microambiente debido a su ubicuidad en el cuerpo humano. En este trabajo se analiza la influencia combinada de la rigidez de estos hidrogeles y su ultraestructura en los patrones de migración de los esferoides HCT-116 y HT-29. Para ello se preparan seis tipos diferentes de hidrogeles de colágeno puro tipo I cambiando la concentración de colágeno y la temperatura de gelificación. Se mide la rigidez de cada muestra y se caracteriza su ultraestructura. Luego se realizan estudios de migración celular sembrando los esferoides en tres condiciones espaciales diferentes. Se muestra que los cambios en los parámetros antes mencionados conducen a diferencias en la rigidez mecánica de las matrices así como en la ultraestructura. Estas diferencias, a su vez, conducen a distintos patrones de migración celular de los esferoides HCT-116 y HT-29 en cualquiera de las condiciones espaciales probadas. Con base en estos resultados, se concluye que la rigidez y la organización ultraestructural de la matriz pueden modular activamente el comportamiento de migración celular en esferoides de cáncer colorrectal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cold-shock proteins accumulate in centrosomes and their expression and primary cilium morphology are regulated by hypothermia and shear stress

  • Díaz de Cerio, Maria
  • Oliván García, Sara
  • Ochoa Garrido, Ignacio
  • Gracia-San Martin, Josune
  • Martinez, Alfredo
Primary cilia act as cellular sensors for multiple extracellular stimuli and regulate many intracellular signaling pathways in response. Here we investigate whether the cold-shock proteins (CSPs), CIRP and RBM3, are present in the primary cilia and the physiological consequences of such a relationship. R28, an immortalized retinal precursor cell line, was stained with antibodies against CIRP, RBM3, and ciliary markers. Both CSPs were found in intimate contact with the basal body of the cilium during all stages of the cell cycle, including migrating with the centrosome during mitosis. In addition, the morphological and physiological manifestations of exposing the cells to hypothermia and shear stress were investigated. Exposure to moderately cold (32°C) temperatures, the hypothermia mimetic small molecule zr17-2, or to shear stress resulted in a significant reduction in the number and length of primary cilia. In addition, shear stress induced expression of CIRP and RBM3 in a complex pattern depending on the specific protein, flow intensity, and type of flow (laminar versus oscillatory). Flow-mediated CSP overexpression was detected by qRT-PCR and confirmed by Western blot, at least for CIRP. Furthermore, analysis of public RNA Seq databases on flow experiments confirmed an increase of CIRP and RBM3 expression following exposure to shear stress in renal cell lines. In conclusion, we found that CSPs are integral components of the centrosome and that they participate in cold and shear stress sensing. Histol Histopathol
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microphysiological systems for solid tumor immunotherapy: opportunities and challenges

  • Abizanda-Campo, Sara
  • Virumbrales-Muñoz, María
  • Humayun, Mouhita
  • Marmol, Ines
  • Beebe, David J.
  • Ochoa, Ignacio
  • Oliván, Sara
  • Ayuso, Jose M.
Immunotherapy remains more effective for hematologic tumors than for solid tumors. One of the main challenges to immunotherapy of solid tumors is the immunosuppressive microenvironment these tumors generate, which limits the cytotoxic capabilities of immune effector cells (e.g., cytotoxic T and natural killer cells). This microenvironment is characterized by hypoxia, nutrient starvation, accumulated waste products, and acidic pH. Tumor-hijacked cells, such as fibroblasts, macrophages, and T regulatory cells, also contribute to this inhospitable microenvironment for immune cells by secreting immunosuppressive cytokines that suppress the antitumor immune response and lead to immune evasion. Thus, there is a strong interest in developing new drugs and cell formulations that modulate the tumor microenvironment and reduce tumor cell immune evasion. Microphysiological systems (MPSs) are versatile tools that may accelerate the development and evaluation of these therapies, although specific examples showcasing the potential of MPSs remain rare. Advances in microtechnologies have led to the development of sophisticated microfluidic devices used to recapitulate tumor complexity. The resulting models, also known as microphysiological systems (MPSs), are versatile tools with which to decipher the molecular mechanisms driving immune cell antitumor cytotoxicity, immune cell exhaustion, and immune cell exclusion and to evaluate new targeted immunotherapies. Here, we review existing microphysiological platforms to study immuno-oncological applications and discuss challenges and opportunities in the field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reducing Inert Materials for Optimal Cell–Cell and Cell–Matrix Interactions within Microphysiological Systems

  • Olaizola-Rodrigo, Claudia
  • Castro-Abril, Héctor
  • Perisé-Badía, Ismael
  • Pancorbo, Lara
  • Ochoa, Ignacio
  • Monge, Rosa
  • Oliván, Sara
In the pursuit of achieving a more realistic in vitro simulation of human biological tissues, microfluidics has emerged as a promising technology. Organ-on-a-chip (OoC) devices, a product of this technology, contain miniature tissues within microfluidic chips, aiming to closely mimic the in vivo environment. However, a notable drawback is the presence of inert material between compartments, hindering complete contact between biological tissues. Current membranes, often made of PDMS or plastic materials, prevent full interaction between cell types and nutrients. Furthermore, their non-physiological mechanical properties and composition may induce unexpected cell responses. Therefore, it is essential to minimize the contact area between cells and the inert materials while simultaneously maximizing the direct contact between cells and matrices in different compartments. The main objective of this work is to minimize inert materials within the microfluidic chip while preserving proper cellular distribution. Two microfluidic devices were designed, each with a specific focus on maximizing direct cell–matrix or cell–cell interactions. The first chip, designed to increase direct cell–cell interactions, incorporates a nylon mesh with regular pores of 150 microns. The second chip minimizes interference from inert materials, thereby aiming to increase direct cell–matrix contact. It features an inert membrane with optimized macropores of 1 mm of diameter for collagen hydrogel deposition. Biological validation of both devices has been conducted through the implementation of cell migration and cell-to-cell interaction assays, as well as the development of epithelia, from isolated cells or spheroids. This endeavor contributes to the advancement of microfluidic technology, aimed at enhancing the precision and biological relevance of in vitro simulations in pursuit of more biomimetic models.