Pasar al contenido principal

ACTIVACION DE ENZIMAS MEDIANTE CALENTAMIENTO LOCAL INDUCIDO POR NANOPARTICULAS PARA APLICACIONES BIOMEDICAS

PID2020-118485RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 57
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

4D printing of supramolecular liquid crystal elastomer actuators fueled by light

  • Lugger, Sean J. D.
  • Ceamanos, Lorena
  • Mulder, Dirk J.
  • Sánchez-Somolinos, Carlos
  • Schenning, Albert P. H. J.
Recent years have seen major advances in the additive manufacturing of stimuli-responsive materials, also known as “4D printing,” among which liquid crystal elastomers (LCEs) play an important role. However, during fabrication photo-crosslinking of the LCEs is required, but this step is time-consuming and efficient polymerization is challenging, especially in the case of light-responsive materials. In this work, the first light-fueled supramolecular LCEs suitable for the direct ink writing (DIW) of soft actuators are synthesized in which a photopolymerization step is not needed. With the responsive supramolecular material, 3D-printed objects are fabricated by exploiting the thermoreversible interplay of the hydrogen-bonding physical cross-links. After printing, the supramolecular LCE shows reversible shape changes in response to light and is capable of bending and lifting a load. Through the combined photothermal and photochemical contributions of the incorporated azobenzene, the actuators can be triggered both in air and water. The freedom provided by DIW allows for the printing of complex responsive objects, as demonstrated by fabricating re-entrant honeycomb and spiral director structures. This approach of printing light-responsive supramolecular soft actuators opens avenues toward the application of “smart” and sustainable materials for additive manufacturing without the requirement of photo-crosslinking., This work was funded by the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). Funding has also been received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00 project, FEDER (EU) and Fondo Social Europeo (DGA E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly uniform Y3Al2Ga3O12-based nanophosphors for persistent luminescence bioimaging in the visible and NIR regions

  • Arroyo, Encarnación
  • Torres Herrero, Beatriz
  • Fuente, Jesús M. de la
  • Ocaña, Manuel
  • Becerro, Ana Isabel
In the last few years, persistent phosphors with a garnet crystal structure have attracted a great deal of interest for a plethora of applications ranging from bioimaging to anti-counterfeiting technologies. However, the development of synthesis methods to fabricate uniform garnet-based micro and nanoparticles, that are needed for such applications, is not mature at all. This study reports the synthesis of highly uniform yttrium aluminum gallium garnet nanospheres. The method is based on homogeneous precipitation in a polyol medium followed by silica coating and calcination. The nanoparticles resulting after silica removal were also uniform and were easily functionalized with polyacrylic acid. The colloidal stability of the latter in physiological media and their biocompatibility were analyzed. The luminescence of the particles, doped with Ce3+, Cr3+, and Nd3+, was studied by recording emission and excitation spectra and persistent luminescence decay curves. Due to their uniform morphology, high colloidal stability, absence of toxicity, and persistent emission in the visible and near-infrared regions, the reported nanospheres show great potential as persistent luminescent bioimaging probes. In addition, the synthesis method paves the way for future use of this persistent material in other applications that require the phosphor to be in the form of highly uniform nanoparticles., This publication is part of the I +D+I Grants RTI2018-094426-B-I00 and PID2020-118485RB-I00 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe”, and the Fondo Social de la DGA (grupos DGA). Financial support was also provided by Junta de Andalucía (P20_00182). Grants FPU19/00527 and FPU19/01311 were funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. This research work was performed in the framework of the Nanomedicine CSIC HUB (Ref. 202180E048)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photonic and magnetic materials for on-demand local drug delivery

  • Armenia, Ilaria
  • Cuestas-Ayllón, Carlos
  • Torres Herrero, Beatriz
  • Bussolari, Francesca
  • Alfranca, Gabriel
  • Grazú, Valeria
  • Fuente, Jesús M. de la
Nanomedicine has been considered a promising tool for biomedical research and clinical practice in the 21st century because of the great impact nanomaterials could have on human health. The generation of new smart nanomaterials, which enable time- and space-controlled drug delivery, improve the limitations of conventional treatments, such as non-specific targeting, poor biodistribution and permeability. These smart nanomaterials can respond to internal biological stimuli (pH, enzyme expression and redox potential) and/or external stimuli (such as temperature, ultrasound, magnetic field and light) to further the precision of therapies. To this end, photonic and magnetic nanoparticles, such as gold, silver and iron oxide, have been used to increase sensitivity and responsiveness to external stimuli. In this review, we aim to report the main and most recent systems that involve photonic or magnetic nanomaterials for external stimulus-responsive drug release. The uniqueness of this review lies in highlighting the versatility of integrating these materials within different carriers. This leads to enhanced performance in terms of in vitro and in vivo efficacy, stability and toxicity. We also point out the current regulatory challenges for the translation of these systems from the bench to the bedside, as well as the yet unresolved matter regarding the standardization of these materials., The research for this work has received funding from: grant PID2020-118485RB-I00 funded by Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, the European Union (EU) projects HOTZYMES (grant agreement n° 829162) and PRIME (grant agreement n° 829010) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01 and DGA and Fondos Feder (Bionanosurf E15_17R). This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. This research work was also funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC’s Global Health Platform (PTI Salud Global). F.B. also thanks Spanish MINECO project BIO2017-84246-C2-1-R for the FPI grant, G.A. is grateful for the Juan de la Cierva-formación (FJC2020-043450-I) funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR” and B.T. is grateful for the FPU predoctoral contract (FPU19/01311) from Ministerio de Educación Cultura y Deporte (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robotic pick-and-place operations in multifunctional liquid crystal elastomers

  • Lyu, Pengrong
  • Astam, Mert Orhan
  • Sánchez-Somolinos, Carlos
  • Liu, Danqing
Pick-and-place operations for transporting objects precisely to a target position are a prominent function of (soft-) robotic systems. Therefore, there is great interest in industry to improve the characteristic gripping, holding, and releasing methods involved in pick-and-place operations. Within living organisms such as octopi, nature demonstrates that multiple types of conjointly working actuators are required for flexible pick-and-place operations. Herein, a multifunctional soft robotic arm is developed, capable of transporting an object within 3D space. The soft robotic arm consists of two structural actuators (rotating base and lifting unit) and a suction cup-based gripper. The structural actuator acts as both the load bearing and actuating components of the robotic system. Yet, the gripper is the crucial innovation within the robotic arm. A cephalopod-limb-inspired gripper functioning through the reversible flat-to-conical deformation of azimuthally aligned liquid crystal elastomer (LCE) films is proposed. The pressure-generating actuation mechanism of the gripper means that no external device is needed to operate the gripping function. Akin to natural systems, the in-tandem operation of the actuators in the soft robotic arm allows for multifactored tasks. Yet, the design achieves this through the use of a single material, which is not innate in natural archetypes., The authors thank financial support from CRT Starterspakket from ICMS, Eindhoven University of Technology, the Netherlands Organization for Scientific Research (NWO OCENW.KLEIN. 10854, START-UP 8872), the European Union's Horizon 2020 Research and Innovation Programmer under the Marie Sklodowska-Curie grant agreement no. 956150 (STORM-BOTS). C.S.S. thanks the Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) project PID2020-118485RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanobiocatalysis: opportunities for remote enzymatic control by nanuactuation

  • Armenia, Ilaria
Resumen del trabajo presentado al IX Iberian Meeting on Colloids and Interfaces, celebrado en Santiago de Compostela (Espaañ) del 10 al 13 de julio de 2022., The research for this work has received funding from: i) the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Program Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01; ii) Spanish MINECO BIO2017-84246-C2-1-R project; iii) MICINN/AEI PID2020-118485RBI00 project; and iv) DGA and Fondos Feder (Bionanosurf E15_17R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tuning of mechanical properties in photopolymerizable gelatin-based hydrogels for in vitrointestinal epithelial models

  • Pamplona, Regina
  • González-Lana, Sandra
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
Resumen del trabajo presentado a la 32nd Annual Conference of the European Society for Biomaterials, celebrada en Bordeaux (Francia) del 4 al 8 de septiembre de 2022., Funding for this work was provided by the Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) project PID2020- 118485RB-I00; Gobierno de Aragoń project LMP221_21, FEDER (EU); through the “Fondo Social Europeo” (DGA E15_20R and E47_20R). RPC acknowledges Gobierno de Aragón for a predoctoral fellowship (2017-2021)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the plasmonic properties of gold-liposome nanohybrids as a potential powerful tool for light-mediated therapies

  • Rubio-Camacho, Marta
  • Martínez-Tomé, María José
  • Cuestas-Ayllón, Carlos
  • Fuente, Jesús M. de la
  • Esquembre, Rocío
  • Reyes Mateo, C.
A fast and environmentally-friendly methodology has been developed by in situ synthesis of gold nanoparticles (AuNPs) on thermosensitive liposomes in different phase-states, obtaining nanohybrids with controllable and tunable plasmon modes within the visible/near-infrared region. Lipid phase, charge and synthesis temperature influence the final arrangement of AuNPs, so when the synthesis is performed on zwitterionic liposomes in fluid phase, discrete AuNPs with plasmon peaks in the visible region are obtained, while in gel phase AuNPs tend to aggregate forming nanoclusters, leading to plasmon bands gradually shifted to the infrared as the synthesis temperature decreases. The formed nanohybrids retain the physical properties of the liposomes (fluidity, degree of hydration, cooperativity) by maintaining the transition temperature in the mild-hyperthermia range, while preserving their light-to-heat conversion properties. Therefore, these nanohybrids can be considered excellent candidates as versatile photothermal agents with controlled drug delivery capacity, being powerful tools for light-mediated therapies., This work was funded by the Spanish MINECO (MAT-2017-86805-R to C.R.M and PID2020-118485-RB-I00 to J.M.F), DGA and Fondos Feder (Bionanosurf E15_17R to J.M.F) and CIBER-Consorcio Centro de Investigación Biomédica en Red (CB16/01/00263 to J.M.F and C.C.A), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commision, European Regional Development Fund). DLS and FE-SEM equipment acquisition funded by Generalitat Valenciana—Conselleria d'Educació Investigació Cultura i Esport and EUFEDER “Una forma de hacer Europa” (GVA-IDIFEDER 2018/020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning of mechanical properties in photopolymerizable gelatin-based hydrogels for in vitro cell culture systems

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco’s modified Eagle’s medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds., This work was funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” through grants PID2020-118485RB-I00, PID2019-109333RB-I00, and PGC2018-097583-B-I00; Gobierno de Aragón through grant LMP221_21; and “Fondo Social Europeo” (E15_20R and E47_20R). RPC acknowledges Gobierno de Aragón for a predoctoral fellowship (2017–2021). S.G.-L. was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Divalent transition metal coatings for an effective protein-nanoparticle conjugation

  • Armenia, Ilaria
  • Ovejero, Jesús G.
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Palomares, F. Javier
  • Veintemillas-Verdaguer, S.
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Grazú, Valeria
Magnetic nanoparticles (MNPs) are widely used for immobilizing complex biomolecules such as proteins due to their high loading capacity, biocompatibility, and easy magnetic harvesting. However, there is not a universal solution to achieve the oriented immobilization of the protein of interest. One common strategy involves the selective binding of poly-histidine-tagged (His-tag) proteins to divalent transition metal centers (TM2+) chelated by organic molecules like nitrilotriacetic acid (NTA). This article describes an innovative procedure to functionalize MNPs by simply growing of a thin layer of TM2+ hydroxides on the MNP surface, which increases the number of coordination centers and enhances the surface interaction with the protein surface. The immobilization yields of two sets of MNPs coated with Co2+, Ni2+ and Cu2+ hydroxides were compared to the conventional coating using the same inorganic cores but coated and functionalized with NTA-TM2+ moieties. It is shown that the one-step Co coated MNPs showed the highest selectivity and specificity towards His-tags. Thus, this coating not only reduce the functionalization steps to drive an oriented protein binding but also achieve an increment of immobilization yields over 1.5-fold respect to NTA-Co2+ analogous for his-tagged proteins with different 3D complexity while preserving similar or even higher enzymatic activity., This work was funded by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), r by the following grants funded by the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (MCIN/AEI) PID2020-113480RB-I00 (to SVV and MPM), PID2020-118485RB-I00 (to VG and JMF), PID2021-126169OB-I00 (to FJP) and by “ERDF A way of making Europe”. FLG thanks IKERBASQUE for sponsoring him. JMF acknowledges CIBER -Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation), Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. This research was also funded by the European Commission-Next Generation EU (Regulation EU 2020/2094). This work has been also partially performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant no. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melt electrowriting of liquid crystal elastomer scaffolds with programmed mechanical response

  • Javadzadeh, Mehrzad
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
This paper is dedicated to Prof. Mark Warner, a pioneer in LCE theory, an exceptional researcher, and an appreciated co-worker and friend., Recently, significant advances have been achieved to precisely program the response of liquid crystal elastomers (LCEs) through extrusion-based additive manufacturing techniques; however, important challenges remain, especially when well-defined scaffolds based on ultrafine fibers are required. Here the melt electrowriting of reactive liquid crystalline inks, leading, after ultraviolet-light-induced crosslinking, to digitally positioned uniform LCE fibers with diameters ranging from hundreds of nanometers to tens of micrometers is presented, which is hardly accessible with conventional extrusion-based printing techniques. The electrowriting process induces the preferential alignment of the mesogens parallel to the fiber's axis. Such an alignment, defined by the printing path, determines the mechanical response of the crosslinked material upon stimulation. This manufacturing platform allows the preparation of open square lattice scaffolds with ultrafine fibers (a few micrometers in diameter), periods as small as 90 µm, and well-defined morphology. Additionally, the combination of accurate fiber stacking (up to 50 layers) and fiber fusion between layers leads to unprecedented microstructures composed of high-aspect-ratio LCE thin walls. The possibility of digitally controlling the printing of fibers allows the preparation complex fiber-based scaffolds with programmed and reversible shape-morphing, thus opening new avenues to prepare miniaturized actuators and smart structures for soft robotics and biomedical applications., The described research study was a part of the project PRIME. This project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). The Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” provided funding for this work through AEI/FEDER(UE) project PID2020-118485RB-I00; Spanish MINECO project BIO2017-84246- C2-1-R; Gobierno de Aragón project LMP221_21, FEDER (EU); through the “Fondo Social Europeo” (DGA E47_20R). J.D.B acknowledges grant RYC-2015-18471, funded by MCIN/AEI/10.13039/501100011033 and by “European Social Fund Investing in your future;” and grant CTQ2017-84087-R supported by MCIN/ AEI /10.13039/501100011033, and by “European Regional Development Fund a way of making Europe” by the European Union. This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. C.S.S. would like to thank the FAB3D interdisciplinary platform (PTI-CSIC) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photomechanical response under physiological conditions of azobenzene-containing 4D-printed liquid crystal elastomer actuators

  • Ceamanos, Lorena
  • Mulder, Dirk J.
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Schenning, Albert P. H. J.
  • Sánchez-Somolinos, Carlos
This article is part of the themed collections: 2023 Journal of Materials Chemistry B Most Popular Articles and Editor’s Choice: Kaushik Chatterjee., Soft and mechanically responsive actuators hold the promise to revolutionize the design and manufacturing of devices in the areas of microfluidics, soft robotics and biomedical engineering. In many of these applications, the actuators need to operate in a wet environment that can strongly affect their performance. In this paper, we report on the photomechanical response in a biological buffer of azobenzene-containing liquid crystal elastomer (LCE)-based actuators, prepared by four-dimensional (4D) printing. Although the photothermal contribution to the photoresponse is largely cancelled by the heat withdrawing capacity of the employed buffer, a significant photoinduced reversible contraction, in the range of 7% of its initial length, has been achieved under load, taking just a few seconds to reach half of the maximum contraction. Effective photomechanical work performance under physiological conditions has, therefore, been demonstrated in the 4D-printed actuators. Advantageously, the photomechanical response is not sensitive to salts present in the buffer differently to hydrogels with responses highly dependent on the fluid composition. Our work highlights the capabilities of photomechanical actuators, created using 4D printing, when operating under physiological conditions, thus showing their potential for application in the microfluidics and biomedical fields., The described research is part of the project PRIME. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 829010 (PRIME). The funding has also been received from Spanish ‘Ministerio de Ciencia, Innovación y Universidades (MCIU)’ through the AEI/FEDER(UE) PID2020-118485RB-I00 project, the Gobierno de Aragón project LMP221_21, FEDER (EU) and Fondo Social Europeo (DGA E47_20R). This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. C.S.-S. would like to thank the FAB3D interdisciplinary platform (PTI-CSIC) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Remote activation of enzyme nanohybrids for cancer prodrug therapy controlled by magnetic heating

  • Torres Herrero, Beatriz
  • Armenia, Ilaria
  • Alleva, María
  • Asín, Laura
  • Correa, Sonali
  • Ortiz, Cecilia
  • Fernández-Afonso, Yilian
  • Gutiérrez, Lucía
  • Fuente, Jesús M. de la
  • Betancourt, Lorena
  • Grazú, Valeria
Herein, we have developed nanohybrids (nHs) to remotely activate a therapeutic enzyme for its use in Directed Enzyme Prodrug Therapy (DEPT). The coencapsulation of magnetic nanoparticles (MNPs) with horseradish peroxidase (HRP) using biomimetic silica as an entrapment matrix was optimized to obtain nanosized hybrids (∼150 nm) for remote activation of the therapeutic enzyme. HRP converts indole-3-acetic acid (3IAA) into peroxylated radicals, whereas MNPs respond to alternating magnetic fields (AMFs) becoming local hotspots. The AMF application triggered an increase in the bioconversion rate of HRP matching the activity displayed at the optimal temperature of the nHs (Topt = 50 °C) without altering the temperature of the reaction media. This showed that enzyme nanoactuation is possible with MNPs even if they are not covalently bound. After an extensive physicochemical/magnetic characterization, the spatial location of each component of the nH was deciphered, and an insulating role of the silica matrix was suggested as critical for introducing remote control over HRP. In vitro assays, using a human pancreatic cancer cell line (MIA PaCa-2), showed that only upon exposure to AMF and in the presence of the prodrug, the enzyme-loaded nHs triggered cell death. Moreover, in vivo experiments showed higher reductions in the tumor volume growth in those animals treated with nHs in the presence of 3IAA when exposed to AMF. Thus, this work demonstrates the feasibility of developing a spatiotemporally controlled DEPT strategy to overcome unwanted off-target effects., This work has been supported by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), by Grant PID2020-118485RB-I00 funded by MCIN/AEI/10.13039/ 501100011033 (to V.G and J.M.F), and by CIBER-Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263 to J.M.), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). B.T-H. acknowledges financial support thanks to the DGA Fellowship program (December 2019–November 2020) and her current predoctoral fellowship (FPU19/01311) funded by MCIN/AEI /10.13039/501100011033 and “ESF Investing in your future”. J.M.F. also acknowledges support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. This research was also funded by the European Commision-NextGenerationEU (Regulation EU 2020/2094). L.B. and C.O. had financial support from PEDECIBA and Universidad ORT Uruguay., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface modifications of COP-based microfluidic devices for improved immobilisation of hydrogel proteins: long-term 3D culture with contractile cell types and ischaemia model

  • González-Lana, Sandra
  • Randelovic, Teodora
  • Ciriza, Jesús
  • López-Valdeolivas, María
  • Monge, Rosa
  • Sánchez-Somolinos, Carlos
  • Ochoa, Ignacio
The tissue microenvironment plays a crucial role in tissue homeostasis and disease progression. However, the in vitro simulation has been limited by the lack of adequate biomimetic models in the last decades. Thanks to the advent of microfluidic technology for cell culture applications, these complex microenvironments can be recreated by combining hydrogels, cells and microfluidic devices. Nevertheless, this advance has several limitations. When cultured in three-dimensional (3D) hydrogels inside microfluidic devices, contractile cells may exert forces that eventually collapse the 3D structure. Disrupting the compartmentalisation creates an obstacle to long-term or highly cell-concentrated assays, which are extremely relevant for multiple applications such as fibrosis or ischaemia. Therefore, we tested surface treatments on cyclic-olefin polymer-based microfluidic devices (COP-MD) to promote the immobilisation of collagen as a 3D matrix protein. Thus, we compared three surface treatments in COP devices for culturing human cardiac fibroblasts (HCF) embedded in collagen hydrogels. We determined the immobilisation efficiency of collagen hydrogel by quantifying the hydrogel transversal area within the devices at the studied time points. Altogether, our results indicated that surface modification with polyacrylic acid photografting (PAA-PG) of COP-MD is the most effective treatment to avoid the quick collapse of collagen hydrogels. As a proof-of-concept experiment, and taking advantage of the low-gas permeability properties of COP-MD, we studied the application of PAA-PG pre-treatment to generate a self-induced ischaemia model. Different necrotic core sizes were developed depending on initial HCF density seeding with no noticeable gel collapse. We conclude that PAA-PG allows long-term culture, gradient generation and necrotic core formation of contractile cell types such as myofibroblasts. This novel approach will pave the way for new relevant in vitro co-culture models where fibroblasts play a key role such as wound healing, tumour microenvironment and ischaemia within microfluidic devices., SGL was funded by a Spanish MINECO fellowship (DI-17-09585). TR studentship was supported by Instituto de Salud Carlos III (i – PFIS IFI16/00050). This work was funded by CDTI (SNEO-20181019), Spanish Government “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) project PID2020-118485RB-I00; “Ministerio de Asuntos Económicos y Transformación Digital – Agencia Estatal de Investigación” through PID2020-118485RB-I00 and PID2021-126051OB-C41 projects. Government of Aragon project LMP221_21, FEDER (EU); through the “Fondo Social Europeo” (DGA T62_20R, E15_20R and E47_20R). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 829010 (PRIME) and from H2020-MSCA-RISE-2017 programme under grant agreement No. 778354 (CISTEM); and also from the Key Digital Technologies Joint Undertaking with 876190., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The mechanical and biological performance of photopolymerized gelatin-based hydrogels as a function of the reaction media

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization has evolved extensively. Several properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, the influence of the reaction media (RM) and swelling media (SM)-phosphate buffered saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations-is described in gelatin methacrylamide (GelMA) hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco-2 and HCT-116). All scaffolds are UV-photocrosslinked under identical conditions and evaluated for mass swelling ratio and stiffness. The results indicate that stiffness is highly susceptible to the RM, but not to the SM. Additionally, PBS-prepared hydrogels exhibited a higher photopolymerization degree according to high resolution magic-angle spinning (HR-MAS) NMR. These findings correlate with the biological response of Caco-2 and HCT-116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation are excellent for both cell lines, and Caco-2 cells displayed a characteristic apical-basal polarization based on F-actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture., This work was funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” through grants PID2020-118485RB-I00, PID2019-109333RB-I00 and PID2021-126132NB-100, Gobierno de Aragón and “ERDF A way of making Europe” though grant LMP221_21; through the “Fondo Social Europeo” (DGA E15_20R). This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. RPC acknowledges Gobierno de Aragón for a predoctoral fellowship (2017-2021). SGL was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Thermal tuning of enzyme activity by magnetic heating

  • Armenia, Ilaria
  • Bussolari, Francesca
  • Sánchez, Manu
  • Gallo-Cordova, Álvaro
  • Ovejero, Jesús G.
  • Macedo de Melo, Eduardo
  • Gamberoni, Federica
  • Borgese, Marina
  • Serio, Simone
  • Guisán, José Manuel
  • Fuente, Jesús M. de la
  • Papait, Roberto
  • Gornati, Rosalba
  • Bernardini, Giovanni
  • Cassinelli, Nicolas
  • Rother, Dörte
  • Morales, María Del Puerto
  • López-Gallego, Fernando
  • Grazú, Valeria
Enzymes are selective, specific, efficient, and more sustainable catalysts than their chemical counterparts. From an industrial perspective, multienzymatic systems to produce chemical compounds are particularly attractive since they comply with most green production principles including the minimization of wastes and their ecological footprints. However, the number of industrial processes based on the use of enzymes as catalysts remains limited. Indeed, incompatibility issues of enzymes with respect to reaction conditions or cross-reactivity are still challenging aspects that make one-pot enzyme cascade reactions hard to perform. The urgent need for more sustainable industrial processes has made different research fields, not accustomed to working together, join efforts to develop innovative technologies that could be key enabling to overcome these challenges. Among these technologies are those that seek to synergistically integrate the specific recognition and unique catalytic properties of enzymes with the size-dependent unique properties of nanoparticles. However, rather than giving a complete overview of the use of nanomaterials in biocatalysts, here it will be discussed the feasibility of triggering magnetic nanoparticles (MNPs) into hotspots by remote nanoactuation for the thermal modulation of discrete enzyme molecules activity with minimal collateral heating., The possibility of heating discrete and defined local regions within a sample offers the potential to introduce a game-changing breakthrough in industrial biocatalysis by achieving coordinated enzyme function and thus concurrent multienzyme reactions. Therefore, not only the principles behind the activation of MNPs as hotspots, but also those examples that report the selective control of enzyme activity by magnetic heating, together with the foreseen challenges for the transfer of this technology to the industry, will be discussed., This work has been supported by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), by Grant PID2020-118485RB-I00 funded by MCIN/AEI/10.13039/501100011033 (to V.G and J.M.F), and by CIBER-Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263 to J.M), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). F.B acknowledges financial support for her predoctoral fellowship (BIO2017-84246-C2-1-R) funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future.” J.M.F also acknowledges support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. This research was also funded by the European Commission-NextGenerationEU (Regulation EU 2020/2094)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multimodal and multistimuli 4D-printed magnetic composite liquid crystal elastomer actuators

  • Espíndola-Pérez, Erick R.
  • Campo, Javier
  • Sánchez-Somolinos, Carlos
Liquid crystal elastomer (LCE)-based soft actuators are being studied for their significant shape-changing abilities when they are exposed to heat or light. Nevertheless, their relatively slow response compared with soft magnetic materials limits their application possibilities. Integration of magnetic responsiveness with LCEs has been previously attempted; however, the LCE response is typically jeopardized in high volumes of magnetic microparticles (MMPs). Here, a multistimuli, magnetically active LCE (MLCE), capable of producing programmable and multimodal actuation, is presented. The MLCE, composed of MMPs within an LCE matrix, is generated through extrusion-based 4D printing that enables digital control of mesogen orientation even at a 1:1 (LCE:MMPs) weight ratio, a challenging task to accomplish with other methods. The printed actuators can significantly deform when thermally actuated as well as exhibit fast response to magnetic fields. When combining thermal and magnetic stimuli, modes of actuation inaccessible with only one input are achieved. For instance, the actuator is reconfigured into various states by using the heat-mediated LCE response, followed by subsequent magnetic addressing. The multistimuli capabilities of the MLCE composite expand its applicability where common LCE actuators face limitations in speed and precision. To illustrate, a beam-steering device developed by using these materials is presented., The described research is part of the project STORM-BOTS. This project has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No 956150. The Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)’’ provided funding for this work through AEI/FEDER(UE) project PID2020-118485RB-I00 and by “European Regional Development Fund a way of making Europe” by the European Union; Gobierno de Aragón project LMP221_21, FEDER (EU) and through the “Fondo Social Europeo” (DGA E15_20R and DGA E11_23R). This research was also supported by CIBER (Consorcio Centro de Investigación Biomédica en Red) (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. C.S.S. thanks the FAB3D interdisciplinary platform (PTI-CSIC) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of gelatin-based hydrogels for colon and pancreas studies using 3D in vitro cell culture

  • Pamplona, Regina
  • González-Lana, Sandra
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
Biomimetic 3D models emerged some decades ago to address 2D cell culture limitations in the field of replicating biological phenomena, structures or functions found in nature. The fabrication of hydrogels for cancer disease research enables the study of cell processes including growth, proliferation and migration and their 3D design is based on the encapsulation of tumoral cells within a tunable matrix. In this work, a platform of gelatin methacrylamide (GelMA)-based photocrosslinked scaffolds with embedded colorectal (HCT-116) or pancreatic (MIA PaCa-2) cancer cells is presented. Prior to cell culture, the mechanical characterization of hydrogels was assessed in terms of stiffness and swelling behavior. Modifications of the UV curing time enabled a fine tuning of the mechanical properties, which at the same time, showed susceptibility to the chemical composition and crosslinking mechanism. All scaffolds displayed excellent cytocompatibility with both tumoral cells while eliciting various cell responses depending on the microenvironment features. Individual and collective cell migration were observed for HCT-116 and MIA PaCa-2 cell lines, highlighting the ability of the colorectal cancer cells to cluster into aggregates of different sizes governed by the surrounding matrix. Additionally, metabolic activity results pointed out to the development of a more proliferative phenotype within stiffer networks. These findings confirm the suitability of the presented platform of GelMA-based hydrogels to conduct 3D cell culture experiments and explore biological processes associated with colorectal and pancreatic cancer., Authors acknowledge the use of instrumentation as well as the technical advice provided by the NMR Service of CEQMA (UZ-CSIC), Microscopy and Imaging Core Facility, (IACS-IISAragon) and “Servicio General de Apoyo a la Investigación (SAI)” This work was funded through projects PID2020-118485RB-I00 and PID2022-141276OB-I00 granted by MICIU/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”; through grant LMP221_21 funded by Gobierno de Aragón and “ERDF A way of making Europe”; and, through the “Fondo Social Europeo” (DGA E15_23R). This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red-(CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. RPC acknowledges Gobierno de Aragón for a predoctoral fellowship (2017-2021). SGL was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photochemically induced propulsion of a 4D printed liquid crystal elastomer biomimetic swimmer

  • Sartori, Paolo
  • Singh Yadav, Rahul
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape-changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene-containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate-intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four-lapped ephyra-like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate-intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light-fueled robotic LCE free-swimmers., The described research was part of the project STORM-BOTS. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 956150. Funding has also been received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00, PID2020-113003GB-I00, CTQ2017-84087-R and CNS2022-135887, Gobierno de Aragón project LMP221_21, FEDER (EU) and Fondo Social Europeo (DGA E15_20R). This research was also supported by the CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. This was partially supported also by MUR-PRIN 2022, project ABYSS: Accurate simulation of Bio-hYbrid Soft Swimmers, Grant No. 2022BN3RAC, CUP: D53D23003410006, funded by the European Union - Next Generation EU. C.S.S. would like to thank the FAB3D interdisciplinary platform (PTI-CSIC) for support. A.D.S. gratefully acknowledges support from the EU Horizon 2020 programme (ERC PoC Grant no. 101069 Stripe-o-Morph)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aligning and observing the liquid crystal director in 3D using small magnetic fields and a wedge-cell

  • Gulati, Lovish
  • Sánchez-Somolinos, Carlos
  • Giesselmann, Frank
  • Fischer, Peer
The mechanical and optical properties of liquid crystalline materials are largely dependent on the director profile. More complex soft robotic functions and programmed optical properties require spatially varying director profiles, ideally in 3D. However, it is challenging to achieve arbitrary director orientation with most established alignment techniques, as one needs to overcome surface interactions, use high electric or magnetic field strengths and temperatures. Another experimental difficulty is that there is a lack of suitable techniques that can be used to characterize the director in 3D. Here, this study first shows that the addition of 5CB to reactive mesogens permits cross-linked liquid crystalline materials to be fabricated with a spatially varying 3D director profile using weak magnetic fields (0.13 T). This study also shows, how these can be characterized with an optical technique that uses a wedge cell to visualize the programmed 3D director profile. Interestingly, the method also permits the real-time observation of the director. This work shows that it is possible to precisely control the director in 3D with low magnetic fields and that the dynamics can be directly observed, which facilitates potential applications of soft liquid crystalline (LC) gels and potentially also elastomers., The described research is part of the project STORM-BOTS. This project has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No 956150. Funding has also been received by Grant PID2020-118485RB-I00 funded by MCIN/AEI/10.13039/ 501100011033, and by CIBER-Consorcio Centro de Investigacioń Biomed́ica en Red (CB16/01/00263), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). This work has been supported by Gobierno de Aragón, FEDER (EU) and Fondo Social Europeo (DGA E15_20R)., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Harnessing the power of thermosensitive liposomes with gold nanoprisms and silica for controlled drug delivery in combined chemotherapy and phototherapy

  • Rubio-Camacho, Marta
  • Cuestas-Ayllón, Carlos
  • Torres Herrero, Beatriz
  • Martínez-Tomé, María José
  • Fuente, Jesús M. de la
  • Reyes Mateo, C.
In recent years, the scientific community has tried to address the treatment of complex diseases such as cancer in a more appropriate and promising way. Regarding this and benefiting from the unique optical properties of gold nanoprisms (AuNPRs), the physicochemical properties of thermosensitive liposomes (TSLs), and the tunable drug encapsulation and release properties of silica nanoparticles (BioSi@NPs), this study has developed two nanoformulations. These nanoformulations have the potential to integrate chemotherapy and photothermal therapy within a single entity. Once their components were synthesized and characterized separately, two strategies were taken in order to develop these multifunctional nanoformulations: (1) covalent binding of AuNPRs to TSLs and (2) co-encapsulation of both components within BioSi@NPs, without modifying the optical and physicochemical properties of AuNPRs and TSLs. Finally, the suitability of both nanoformulations to carry and release hydrophilic drugs when triggered by a 1064 nm NIR laser has been explored by using the fluorescent probe 5(6)-carboxyfluorescein (CF) as a hydrophilic drug model. Different laser power and time of exposure were also tested evidencing that hydrophilic drugs were only released from TSLs in the presence of AuNPRs and that the drug release profile was dependent on the type of nanoformulation and irradiation conditions used. In conclusion, these multifunctional nanoformulations exhibit promising potential for controlled drug delivery in combined chemotherapy and phototherapy, with the capability to precisely control the release kinetics based on specific therapeutic needs., This work was supported by the projects PID2022-138507OB-I00 (funded by MICIU/AEI/10.13039/501100011033 and ERDF, EU), CIAICO/2022/131 (funded by Generalitat Valenciana) and PID2020-118485RB-I00 (funded by Agencia Estatal de Investigación). In addition, M. R.-C. acknowledges her predoctoral fellowship (ACIF/2018/226) and mobility grant (BEFPI/2021/083) funded by the Generalitat Valenciana, Conselleria d’Educació, Investigació, Cultura I Esport. B. T.-H. also acknowledges her financial support to the DGA Fellowship program (December 2019–November 2020) and to the predoctoral fellowship (FPU19/01311) funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. Authors also acknowledge support from Gobierno de Aragón and Fondos Feder for funding the Bionanosurf (E15_23R) research group. The authors would like to acknowledge the use of the Advanced Microscopy Laboratory (Universidad de Zaragoza), for access to their instrumentation and expertise and the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Opportunities for nanomaterials in enzyme therapy

  • Torres Herrero, Beatriz
  • Armenia, Ilaria
  • Ortiz, Cecilia
  • Fuente, Jesús M. de la
  • Betancourt, Lorena
  • Grazú, Valeria
In recent years, enzyme therapy strategies have rapidly evolved to catalyze essential biochemical reactions with therapeutic potential. These approaches hold particular promise in addressing rare genetic disorders, cancer treatment, neurodegenerative conditions, wound healing, inflammation management, and infectious disease control, among others. There are several primary reasons for the utilization of enzymes as therapeutics: their substrate specificity, their biological compatibility, and their ability to generate a high number of product molecules per enzyme unit. These features have encouraged their application in enzyme replacement therapy where the enzyme serves as the therapeutic agent to rectify abnormal metabolic and physiological processes, enzyme prodrug therapy where the enzyme initiates a clinical effect by activating prodrugs, and enzyme dynamic or starving therapy where the enzyme acts upon host substrate molecules. Currently, there are >20 commercialized products based on therapeutic enzymes, but approval rates are considerably lower than other biologicals. This has stimulated nanobiotechnology in the last years to develop nanoparticle-based solutions that integrate therapeutic enzymes. This approach aims to enhance stability, prevent rapid clearance, reduce immunogenicity, and even enable spatio-temporal activation of the therapeutic catalyst. This comprehensive review delves into emerging trends in the application of therapeutic enzymes, with a particular emphasis on the synergistic opportunities presented by incorporating enzymes into nanomaterials. Such integration holds the promise of enhancing existing therapies or even paving the way for innovative nanotherapeutic approaches., This work has been supported by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162 to V.G), by MICIU/AEI /10.13039/501100011033 (PID2020-118485RB-I00 to V.G and J.M.F, and ayuda CEX2023-001286-S), and by CIBER-Consorcio Centro de Investigación Biomédica en Red/Instituto de Salud Carlos III(CB16/01/00263 to J.M.F). This research work was also funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094) through CSIC's Global Health Platform (PTI Salud Global). B.Tsingle bondH. acknowledges financial support thanks to the DGA Fellowship program (December 2019–November 2020) and her predoctoral fellowship (FPU19/01311) funded by MICIU/AEI /10.13039/501100011033 and “ESF Investing in your future”. J.M.F. also acknowledges support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. L.B and C.O. had financial support from PEDECIBA, Universidad ORT Uruguay, and ANII (FMV_1_2023_1_176582)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reprogrammable 4D printed liquid crystal elastomer photoactuators by means of light-reversible perylene diimide radicals

  • Montesino, Lorena
  • Martínez, Jesús I.
  • Sánchez-Somolinos, Carlos
Reconfigurable soft actuators can be programmed to morph into different 3D shapes under the same stimulus exhibiting great potential for adaptive robotic functionalities. Liquid crystalline crosslinked materials programmed and controlled by light have demonstrated great potential in this area, however, their implementation is mainly based on azobenzene chromophores, using ultraviolet light that can potentially damage the device and its surroundings, especially if living cells are present. Here, an ink is presented, containing a green-absorbing perylene diimide chromophore, to prepare light active liquid crystalline elastomer (LCE) actuators via direct ink writing. Green light irradiation of the LCE elements leads to photothermal actuation, but also to new absorption bands in the far-red and near-infrared, ascribed to the formation of radical species. Far-red irradiation results in mechanical actuation and, advantageously, a recovery of the original absorption spectrum. This reversible transformation enables spatial reconfigurability of the actuator's response to far-red light. The reconfigurable system gives access to complex deformation modes by simply exciting the element with homogeneous far-red light, without the need for any structural modification of the actuator. This material strategy, using green and far-red light, less harmful than ultraviolet, shows significant promise for future development of reconfigurable actuators for biomedical applications., The described research is part of the project PRIME. This project had received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 829010 (PRIME). Funding had also been received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00 and PID2022-140923NB-C21 projects, Gobierno de Aragón project LMP221_21, FEDER (EU) and Fondo Social Europeo (DGA E15_20R and E09_23R). This research was also supported by CIBER-Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. L.M acknowledges Gobierno de Aragón for a predoctoral fellowship (2020-2024). C.S.S. acknowledges FAB3D interdisciplinary platform (PTI-CSIC) for support., The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic regulation of Rgs16 and its correlation with Neuregulin1 expression in acute and chronic nerve injury

  • García-Bejarano, Marina
  • Aucello, Riccardo
  • Zen, Federica
  • El Soury, Marwa
  • Cordero, Francesca
  • Fuente, Jesús M. de la
  • Perroteau, Isabelle
  • Ronchi, Giulia
  • Gambarotta, Giovanna
[Introduction]: Regulators of G Protein Signaling (RGS) form a gene family that modulates G protein-coupled receptor signaling by enhancing the GTPase activity of the Gα-GTP complex, effectively inhibiting G protein-dependent signal transduction cascades. While RGSs are expressed across many organs, including the central nervous system, few data are available for the peripheral nervous system (PNS)., [Methods and Results]: To investigate potential links between RGS and PNS, open-access single-cell RNA sequencing datasets were analyzed, focusing on mice intact sciatic nerves and distal stumps at 3 and 9 days post-transection. Rgs16 emerged as the RGS member most highly expressed by Schwann cells after injury, suggesting its involvement in nerve degeneration. To further explore Rgs16 behavior in nerve injury, its expression was assessed at mRNA level at different time points in the median nerve of adult rats under regenerating conditions following mild (crush) or more severe (end-to-end repair) traumatic injury, and under degenerating conditions. Results revealed that Rgs16 expression increased 3 days after injury, declining under regenerating conditions, but remaining high in degenerating conditions. To examine the role of Rgs16 in chronic nerve degeneration, its expression was evaluated in a pathological model of Charcot-Marie-Tooth disease type-1A (CMT1A), a chronic demyelinating peripheral neuropathy. Analysis of publicly available RNA sequencing data from sciatic nerves of wild-type and CMT1A rats during development showed a significant upregulation of Rgs16 in transgenic rats at P18. Interestingly, this upregulation mirrored the expression pattern of Neuregulin1 (Nrg1), a gene critical for Schwann cell dedifferentiation and demyelination, strongly upregulated in traumatic and chronic nerve injuries. To explore a potential NRG1-RGS16 link, primary Schwann cell cultures were treated with recombinant NRG1β1, which induced an increase in Rgs16 expression., [Discussion]: These findings suggest a potential feedback mechanism where transient Rgs16 upregulation in response to injury and/or NRG1 might negatively regulate NRG1 release through RGS16-mediated inhibition of GPCR/ErbB transactivation. This study highlights the dynamic role of Rgs16 in traumatic and chronic nerve injuries, implicating its involvement in processes of nerve degeneration, regeneration, and possibly neuropathic pain. Further investigations are needed to clarify RGS16 function, which could pave the way for novel therapeutic strategies to enhance nerve regeneration and alleviate neuropathic pain., The authors declare that financial support was received for the research and/or publication of this article. GG, GR, IP were funded by Università degli Studi di Torino (“Fondo per la ricerca locale”). JMF and the Bionanosurf research group (E15_23R) were funded by Gobierno de Aragón, “European Regional Development Fund (ERDF) – “A way of making Europe” and Agencia Estatal de Investigación (PID2020-118485RB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-photochemically responsive liquid crystal elastomer for underwater actuation

  • Nemati, Yasaman
  • Yang, Qi
  • Sohrabi, Fereshteh
  • Timonen, Jaakko V.I.
  • Sánchez-Somolinos, Carlos
  • Honkanen, Mari
  • Zeng, Hao
  • Priimagi, Arri
The quest for small-scale, remotely controlled soft robots has led to the exploration of magnetic and optical fields for inducing shape morphing in soft materials. Magnetic stimulus excels when navigation in confined or optically opaque environments is required. Optical stimulus, in turn, boasts superior spatial precision and individual control over multiple objects. Herein, we bring these two methodologies together and present a monolithic liquid crystal elastomer (LCE) system that synergistically combines magnetic and photochemical actuation schemes. The resultant composite material showcases versatile possibilities for underwater actuation, and we demonstrate robotic functionalities where the optical and magnetic response can be leveraged in different tasks (object gripping and object translocation, respectively) or where light can be used as a control signal to tune the magnetically induced actuation. Combining these two remote actuation methods offers powerful, dual-mode control in wireless, small-scale robotics, especially in submersed environments due to their isothermal nature., This work is financially supported by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement 956150 (STORM-BOTS) and by the European Research Council (Starting Grant project ONLINE, No. 101076207, for H.Z. and Consolidator Grant project MULTIMODAL, No. 101045223, for A.P.). We gratefully acknowledge the support from the Academy of Finland through Center of Excellence Life-Inspired Hybrid Materials (LIBER, No. 346107, 346112, 364206) and the Flagship Programme on Photonics Research and Innovation, No. 320165. C.S.S. acknowledges funding received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00, Gobierno de Aragón, FEDER (EU) and Fondo Social Europeo (DGA E15_20R). C.S.S. is also supported by CIBER─Consorcio Centro de Investigación Biomédica en Red─(CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. Q.Y. acknowledges the support from China Scholarship Council (CSC). The authors thank Tero-Petri Ruoko for assistance with the function generator. SEM-EDS work made use of Tampere Microscopy Center facilities at Tampere University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Förster Resonance Energy Transfer (FRET) demonstrates in vitro chitosan-coated nanocapsules suitability for intranasal brain delivery

  • Alleva, María
  • Baranyai, Zsuzsa
  • Esteban-Pérez, Natalia
  • Martínez-Vicente, Pablo
  • Martín-Rapún, Rafael
  • Moros, María
  • Fuente, Jesús M. de la
Intranasal drug delivery to the brain offers a promising strategy to overcome biological barriers. Chitosan-coated nanoemulsion-based nanocapsules demonstrate significant potential due to their mucoadhesive properties, ability to permeate epithelial cells, and ability to solubilize poorly water-soluble drugs, making them ideal candidates for bypassing the blood-brain barrier and overcoming the nasal mucosa. To ensure effective drug delivery, it is critical to assess the integrity of these nanocapsules during their transit across such barriers. In this study, we employed Förster resonance energy transfer to track the structural integrity of nanocapsules during transport. A simplified in vitro model was established using Calu-3 cells to mimic the mucosal epithelial barrier and Balb-c 3T3 fibroblasts as target cells. Our findings demonstrated that the nanoemulsion core of the nanocapsules successfully crossed the in vitro epithelial barrier and reached target cells while maintaining its structural integrity. These results validate the potential of chitosan-coated nanocapsules as a robust platform for the intranasal delivery of drugs to the brain., This work has been supported by MICIU/AEI/10.13039/501100011033 (PID2020-118485RB-I00, and ayuda Severo Ochoa CEX2023-001286-S), by CIBER-Consorcio Centro de Investigación Biomédica en Red/Instituto de Salud Carlos III (CB16/01/00263). This research work was also funded by the European Commission–NextGenerationEU (Regulation EU 2020/2094) through CSIC’s Global Health Platform (PTI Salud Global), and by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 842652 and the CSIC’s MSCA IF extension. MA and NEP acknowledge Gobierno de Aragón for predoctoral fellowships (2019–2023 and 2022–2026). The authors also acknowledge support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bridging sensing and action: autonomous object sorting by reprogrammable liquid crystal elastomers

  • Montesino, Lorena
  • López-Valdeolivas, María
  • Martínez, Jesús I.
  • Sánchez-Somolinos, Carlos
The data that support the findings of this study are available from the corresponding author upon reasonable request., Achieving autonomy in soft robotics requires integrating sensing, planning, and actuation. Stimuli-responsive liquid crystal elastomers (LCEs) are promising for this purpose due to their intrinsic sensory capabilities, adaptability and integrability. Nevertheless, self-regulated LCE systems typically rely on single-mode bending actuators with feedback-type mechanisms, where deformation gradually increases with stimulus intensity but only causes a functional transition beyond a critical activation point. This enables autonomous switching between non-functional and functional states, however, their behavior remains reactive, limiting their ability to perform complex adaptive tasks. Here, we present a reprogrammable LCE actuator capable of autonomously sorting objects based on their green-light transmission properties. Using perylene diimide-doped LCEs and controlled green-light illumination, the actuator senses the optical properties of the object, establishing an actuation plan through spatial radical generation. Subsequent far-red irradiation triggers different actuation modes, enabling selective object sorting. This pattern-encoded actuation allows objects with different optical characteristics to trigger specific mechanical responses under identical illumination conditions. This single-material system, which is optically resettable, integrates sensory feedback, deliberative decision-making, and adaptive mechanical responses. Surpassing the reactive nature of conventional self-regulated LCE systems, our approach advances LCE-based robotics toward greater autonomy, aligning with the sense-plan-act paradigm., [New concepts] Herein, we introduce a reprogrammable liquid crystal elastomer (LCE) actuator capable of autonomously sorting objects based on their green-light transmission properties, marking a significant breakthrough from conventional self-regulated LCE systems. Unlike traditional LCE-based self-regulated devices that exhibit reactive responses, our approach integrates sensory input, deliberative decision-making, and multi-modal actuation within a single-material system. This advancement allows the actuator to not only respond to stimuli but also process optical information to determine actuation pathways. This is achieved through spatially controlled radical generation, wherein green-light illumination encodes different actuation plans by selectively creating radical species that absorb in the far-red region. Subsequent far-red irradiation triggers different mechanical responses depending on the optical properties of the object. This enables pre-programmed, differentiated deformation modes under identical stimulus conditions, facilitating sorting of objects based on their green-light transmission. This pattern-encoded actuation mechanism surpasses existing LCE-based feedback systems by introducing material-embedded decision-making, effectively bridging the gap between sensing and adaptive response. Additionally, the system is optically resettable, enabling repeated reconfiguration and therefore continuous sorting operation without external intervention. Our actuator represents a significant conceptual advance, aligning LCE-based soft robotics with the sense-plan-act paradigm, a fundamental principle in robotic autonomy., The described research is part of the project PRIME. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 829010 (PRIME). Funding has also been received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00 and PID2022-140923NB-C21, Gobierno de Aragón project PROY_E28_24, FEDER (EU) and Fondo Social Europeo (DGA E15_20R and E09_23R). This research was also supported by CIBER-Consorcio Centro de Investigación Biomédica en Red-(CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. L. M. acknowledges Gobierno de Aragón for a predoctoral fellowship (2020–2024). C. S. S. acknowledges FAB3D interdisciplinary platform (PTI-CSIC) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

4D Printable formulations of mixed low and high molecular weight liquid crystalline units: A versatile route to functional soft actuators

  • Ceamanos, Lorena
  • López-Valdeolivas, María
  • Lyu, Pengrong
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
The data that support the findings of this study are available from the corresponding author upon reasonable request., Over the last few years, 4D printing of liquid crystal elastomers (LCEs) has been explored to develop actuators with significant, reversible, and anisotropic shape changes upon external stimuli such as heat or light. Most reported ink formulations rely on photo-curable liquid crystal materials derived from high molecular weight (MW) main-chain macromers. Their rheological properties allow to program molecular alignment during direct ink writing. In contrast, formulations composed mainly of monoacrylate or diacrylate low MW mesogens are unsuitable for extrusion-based 4D printing as they fail to promote mesogen alignment during printing. This shortcoming restricts the range of chemical and physical compositions accessible to 4D printing. Here, we introduce a practical route for formulating 4D printable inks that integrate low MW mesogens. By adding an acrylate-ended macromer to the low MW constituents, these mixtures become suitable for direct ink writing. This enables the preparation of multi-functional actuators with digitally controlled director morphology and tailored properties, for example, stiffness and actuation strain, as well as light-responsive behavior when photoactive molecules are used. These results highlight the versatility of the method and suggest its potential compatibility with other functional low MW units, such as those responsive to electrical or pH stimuli., The described research is part of the project PRIME. This project has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No 829010 (PRIME). Funding had also been received from the Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” MICIU/AEI/10.13039/501100011033, grants PID2020-118485RB-I00 and CEX2023-001286-S, and by the European Union NextGenerationEU/PRTR. This research was also supported by CIBER- Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). This work has been supported by Gobierno de Aragón project PROY_E28_24, FEDER (EU) and Fondo Social Europeo (DGA E15_20R)., FEDER (EU) and Fondo Social Europeo (DGA E15_20R). C.S.S. acknowledges the FAB3D interdisciplinary platform (PTI-CSIC) for support. The authors acknowledge the use of the Servicios Científico-Técnicos from CEQMA (CSIC) and Servicio de Caracterización from ICTP (CSIC)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled release of glucocorticoid via PLGA nanoparticles for modulating macrophage polarization in inflammation situations

  • Esteban-Pérez, Natalia
  • Del Sol-Fernández, Susel
  • Martín-Rapún, Rafael
  • Fuente, Jesús M. de la
Glucocorticoids are among the most widely used anti-inflammatory and immunosuppressive drugs. However, their prolonged administration is associated with a wide range of adverse side effects including long-lasting immunosuppression. In this study, we aimed to encapsulate two commonly used glucocorticoids with different potency and duration, hydrocortisone and dexamethasone, into poly(lactic-co-glycolic acid) (PLGA) nanoparticles with the goal to modulate inflammatory gene expression in a delivery-dependent manner. We evaluated their anti-inflammatory properties in two in vitro models varying the timing of treatment administration based on lipopolysaccharide M1-polarized macrophages, key effectors of the innate immune system. Our results demonstrated that, for both strategies, drug-loaded nanoparticles significantly reduced the expression of interleukin-6, a pro-inflammatory cytokine, compared to the free drugs. However, in one of the strategies, while free drugs induced upregulation of interleukin-10, a key anti-inflammatory cytokine, no such effect was observed with the nanoparticle-based formulations. Overall, these results demonstrate that PLGA nanoparticles enable sustained glucocorticoid delivery and modulate inflammatory gene expression in activated macrophages in a delivery- and timing-dependent manner, providing comparative insight into how glucocorticoid delivery via PLGA nanoparticles shapes inflammatory gene regulation depending on treatment timing and highlighting the importance of in vitro model design., This work has been supported by the grants CEX2023-001286-S, PID2020-118485RB-I00 and PID2022-141276OB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF (EU). The research has also been funded by CIBER-Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263) from Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). N.E.P. acknowledges financial support from Gobierno de Aragón Predoctoral Fellowship program (2022). S. D. S.-F. acknowledges Marie Skłodowska-Curie Postdoctoral Fellowships (HORIZON-MSCA-2021-PF-01-01, Grant agreement No. 101064735) funded by the European Union. The authors are also grateful to Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Delayed crosslinking enables ultra-high-resolution melt electrowriting of responsive liquid crystal elastomers

  • Javadzadeh, Mehrzad
  • Fernández-Melero, María
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
Melt electrowriting (MEW) enables the fabrication of finely structured scaffolds with sub-micrometer resolution. However, reducing the inter-fiber distance (IFD) in MEW remains challenging due to electrostatic interactions between the charged polymer jet and previously deposited fibers, often leading to fiber bridging. Recently, we demonstrated that MEW of reactive liquid crystalline inks, followed by ultraviolet (UV) photopolymerization, enables the fabrication of digitally positioned liquid crystal elastomer (LCE) structures. Building on this, we demonstrate that tuning the UV light intensity during photopolymerization significantly improves the achievable resolution range. Lower UV intensities produce smaller minimum IFDs without fiber bridging, enabling the fabrication of highly ordered structures with IFDs down to 11 µm for 5 µm-diameter fibers, a feature that, to the best of our knowledge, surpasses the smallest IFDs previously reported for MEW. We hypothesize that slower crosslinking kinetics extend the time window for charge dissipation, reducing electrostatic interactions between the jet and the previously deposited fibers. Although the mechanism remains unclear, local variations in material flow or curing-induced surface morphology may also affect electric field distribution. Beyond resolution improvements, this strategy enables defect-free fabrication of stimuli-responsive LCEs with programmable shape transformation and actuation. UV light intensity thus emerges as a critical design parameter for MEW, with implications for other photo-crosslinkable systems., The described research is part of the project PRIME. This project received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 829010 (PRIME). Funding had also been received from the Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” MICIU/AEI/10.13039/501100011033, grants PID2020-118485RB-I00 and CEX2023-001286-S, and through grant CNS2022-135887 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, Gobierno de Aragón project PROY_E28_24, FEDER (EU) and Fondo Social Europeo (DGA E15_20R and E47_20R). This research was also supported by CIBER – Consorcio Centro de Investigación Biomédica en Red – (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. M. F.M. acknowledges Gobierno de Aragón for a predoctoral fellowship (2023–2027). The authors would like to acknowledge the use of the Laboratorio de Microscopias Avanzadas and the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. C. S. S. acknowledges the FAB3D interdisciplinary platform (PTI-CSIC) for support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Holographic whole-object photopolymerization preserving director alignment in liquid crystalline actuators

  • Gulati, Lovish
  • Junhee, Lee
  • Norouzikudiani, Reza
  • Li, Jianfeng
  • Sánchez-Somolinos, Carlos
  • DeSimone, Antonio
  • Melde, Kai
  • Song, Alexander
  • Fischer, Peer
Liquid crystalline (LC) crosslinked polymeric structures are promising for soft robotic applications, as their actuation profile is intrinsically encoded and results from the structure's shape and the LC molecular orientation (director). However, it remains challenging to fabricate 3D objects and at the same time control the director orientation within the 3D structure. Liquid crystalline molecules are commonly aligned using modified surfaces or electric/magnetic fields. However, additive manufacturing methods may locally distort the director, when fabricating 3D objects. Here, holographic microlithography is employed to form entire connected 3D objects in a single exposure by cross-linking the LC, while allowing the director orientation within the object to be freely controlled. This enables us to independently choose a global director orientation and then realize complex 3D geometries in a single fabrication step. This approach avoids the director distortion present in sequential 3D printing and lithography methods, and allows for complex actuation profiles that are directly linked to the 3D director orientation. The method presented herein permits the rapid fabrication of complex 3D connected LC structures while preserving the molecular order, and thereby enables the fabrication of more complex 3D soft actuators., The research is part of the project STORM-BOTS, and the authors acknowledge funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 956150. J.L. and K.M. acknowledge funding by the Carl–Zeiss–Stiftung (Nexus grant no. P2022-04-073). J.Li acknowledges the support from Deutsche Forschungsgemeinschaft (DFG) under Excellence Cluster 3D Matter Made to Order (EXC-2082/1–390761711). C.S.S. acknowledges MICIU/AEI/10.13039/501100011033, grants PID2020-118485RB-I00 and CEX2023-001286-S, Gobierno de Aragón project PROY_E28_24, FEDER (EU) and Fondo Social Europeo (DGA E15_20R), CIBER–Consorcio Centro de Investigación Biomédica en Red–(CB06/01/00263)., Open access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly uniform Y3Al2Ga3O12-based nanophosphors for persistent luminescence bioimaging in the visible and NIR regions

  • Arroyo, Encarnación
  • Torres Herrero, Beatriz
  • Martínez de la Fuente, Jesús
  • Ocaña, Manuel
  • Becerro, Ana I.
In the last few years, persistent phosphors with a garnet crystal structure have attracted a great deal of interest for a plethora of applications ranging from bioimaging to anti-counterfeiting technologies. However, the development of synthesis methods to fabricate uniform garnet-based micro and nanoparticles, that are needed for such applications, is not mature at all. This study reports the synthesis of highly uniform yttrium aluminum gallium garnet nanospheres. The method is based on homogeneous precipitation in a polyol medium followed by silica coating and calcination. The nanoparticles resulting after silica removal were also uniform and were easily functionalized with polyacrylic acid. The colloidal stability of the latter in physiological media and their biocompatibility were analyzed. The luminescence of the particles, doped with Ce3+, Cr3+, and Nd3+, was studied by recording emission and excitation spectra and persistent luminescence decay curves. Due to their uniform morphology, high colloidal stability, absence of toxicity, and persistent emission in the visible and near-infrared regions, the reported nanospheres show great potential as persistent luminescent bioimaging probes. In addition, the synthesis method paves the way for future use of this persistent material in other applications that require the phosphor to be in the form of highly uniform nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Tailoring the plasmonic properties of gold-liposome nanohybrids as a potential powerful tool for light-mediated therapies

  • Rubio-Camacho, Marta
  • Martínez-Tomé, María José
  • Cuestas Ayllón, Carlos
  • Martínez de la Fuente, Jesús
  • Esquembre, Rocío
  • Mateo, C. Reyes
A fast and environmentally-friendly methodology has been developed by in situ synthesis of gold nanoparticles (AuNPs) on thermosensitive liposomes in different phase-states, obtaining nanohybrids with controllable and tunable plasmon modes within the visible/near-infrared region. Lipid phase, charge and synthesis temperature influence the final arrangement of AuNPs, so when the synthesis is performed on zwitterionic liposomes in fluid phase, discrete AuNPs with plasmon peaks in the visible region are obtained, while in gel phase AuNPs tend to aggregate forming nanoclusters, leading to plasmon bands gradually shifted to the infrared as the synthesis temperature decreases. The formed nanohybrids retain the physical properties of the liposomes (fluidity, degree of hydration, cooperativity) by maintaining the transition temperature in the mild-hyperthermia range, while preserving their light-to-heat conversion properties. Therefore, these nanohybrids can be considered excellent candidates as versatile photothermal agents with controlled drug delivery capacity, being powerful tools for light-mediated therapies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Robotic pick-and-place operations in multifunctional liquid crystal elastomers

  • Lyu, Pengrong
  • Astam, Mert Orhan
  • Sánchez-Somolinos, Carlos
  • Liu, Danqing
Pick-and-place operations for transporting objects precisely to a target position are a prominent function of (soft-) robotic systems. Therefore, there is great interest in industry to improve the characteristic gripping, holding, and releasing methods involved in pick-and-place operations. Within living organisms such as octopi, nature demonstrates that multiple types of conjointly working actuators are required for flexible pick-and-place operations. Herein, a multifunctional soft robotic arm is developed, capable of transporting an object within 3D space. The soft robotic arm consists of two structural actuators (rotating base and lifting unit) and a suction cup-based gripper. The structural actuator acts as both the load bearing and actuating components of the robotic system. Yet, the gripper is the crucial innovation within the robotic arm. A cephalopod-limb-inspired gripper functioning through the reversible flat-to-conical deformation of azimuthally aligned liquid crystal elastomer (LCE) films is proposed. The pressure-generating actuation mechanism of the gripper means that no external device is needed to operate the gripping function. Akin to natural systems, the in-tandem operation of the actuators in the soft robotic arm allows for multifactored tasks. Yet, the design achieves this through the use of a single material, which is not innate in natural archetypes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

4D printing of supramolecular liquid crystal elastomer actuators fueled by light

  • Lugger, Sean J. D.
  • Ceamanos, Lorena
  • Mulder, Dirk J.
  • Sánchez-Somolinos, Carlos
  • Schenning, Albert P. H. J.
Recent years have seen major advances in the additive manufacturing of stimuli-responsive materials, also known as “4D printing,” among which liquid crystal elastomers (LCEs) play an important role. However, during fabrication photo-crosslinking of the LCEs is required, but this step is time-consuming and efficient polymerization is challenging, especially in the case of light-responsive materials. In this work, the first light-fueled supramolecular LCEs suitable for the direct ink writing (DIW) of soft actuators are synthesized in which a photopolymerization step is not needed. With the responsive supramolecular material, 3D-printed objects are fabricated by exploiting the thermoreversible interplay of the hydrogen-bonding physical cross-links. After printing, the supramolecular LCE shows reversible shape changes in response to light and is capable of bending and lifting a load. Through the combined photothermal and photochemical contributions of the incorporated azobenzene, the actuators can be triggered both in air and water. The freedom provided by DIW allows for the printing of complex responsive objects, as demonstrated by fabricating re-entrant honeycomb and spiral director structures. This approach of printing light-responsive supramolecular soft actuators opens avenues toward the application of “smart” and sustainable materials for additive manufacturing without the requirement of photo-crosslinking.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning of Mechanical Properties in Photopolymerizable Gelatin-Based Hydrogels for <i>In Vitro</i> Cell Culture Systems

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco’s modified Eagle’s medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photonic and magnetic materials for on-demand local drug delivery

  • Armenia, Ilaria
  • Cuestas Ayllón, Carlos
  • Torres Herrero, Beatriz
  • Bussolari, Francesca
  • Alfranca, Gabriel
  • Grazú, Valeria
  • Martínez de la Fuente, Jesús
Nanomedicine has been considered a promising tool for biomedical research and clinical practice in the 21st century because of the great impact nanomaterials could have on human health. The generation of new smart nanomaterials, which enable time- and space-controlled drug delivery, improve the limitations of conventional treatments, such as non-specific targeting, poor biodistribution and permeability. These smart nanomaterials can respond to internal biological stimuli (pH, enzyme expression and redox potential) and/or external stimuli (such as temperature, ultrasound, magnetic field and light) to further the precision of therapies. To this end, photonic and magnetic nanoparticles, such as gold, silver and iron oxide, have been used to increase sensitivity and responsiveness to external stimuli. In this review, we aim to report the main and most recent systems that involve photonic or magnetic nanomaterials for external stimulus-responsive drug release. The uniqueness of this review lies in highlighting the versatility of integrating these materials within different carriers. This leads to enhanced performance in terms of in vitro and in vivo efficacy, stability and toxicity. We also point out the current regulatory challenges for the translation of these systems from the bench to the bedside, as well as the yet unresolved matter regarding the standardization of these materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Melt electrowriting of liquid crystal elastomer scaffolds with programmed mechanical response

  • Javadzadeh, Mehrzad
  • del Barrio, Jesús
  • Sánchez-Somolinos, Carlos
Recently, significant advances have been achieved to precisely program the response of liquid crystal elastomers (LCEs) through extrusion-based additive manufacturing techniques; however, important challenges remain, especially when well-defined scaffolds based on ultrafine fibers are required. Here the melt electrowriting of reactive liquid crystalline inks, leading, after ultraviolet-light-induced crosslinking, to digitally positioned uniform LCE fibers with diameters ranging from hundreds of nanometers to tens of micrometers is presented, which is hardly accessible with conventional extrusion-based printing techniques. The electrowriting process induces the preferential alignment of the mesogens parallel to the fiber's axis. Such an alignment, defined by the printing path, determines the mechanical response of the crosslinked material upon stimulation. This manufacturing platform allows the preparation of open square lattice scaffolds with ultrafine fibers (a few micrometers in diameter), periods as small as 90 µm, and well-defined morphology. Additionally, the combination of accurate fiber stacking (up to 50 layers) and fiber fusion between layers leads to unprecedented microstructures composed of high-aspect-ratio LCE thin walls. The possibility of digitally controlling the printing of fibers allows the preparation complex fiber-based scaffolds with programmed and reversible shape-morphing, thus opening new avenues to prepare miniaturized actuators and smart structures for soft robotics and biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Surface modifications of COP-based microfluidic devices for improved immobilisation of hydrogel proteins: long-term 3D culture with contractile cell types and ischaemia model

  • González-Lana, Sandra
  • Randelovic, Teodora
  • Ciriza, Jesús
  • López-Valdeolivas, María
  • Monge, Rosa
  • Sánchez-Somolinos, Carlos
  • Ochoa, Ignacio
The tissue microenvironment plays a crucial role in tissue homeostasis and disease progression. However, the in vitro simulation has been limited by the lack of adequate biomimetic models in the last decades. Thanks to the advent of microfluidic technology for cell culture applications, these complex microenvironments can be recreated by combining hydrogels, cells and microfluidic devices. Nevertheless, this advance has several limitations. When cultured in three-dimensional (3D) hydrogels inside microfluidic devices, contractile cells may exert forces that eventually collapse the 3D structure. Disrupting the compartmentalisation creates an obstacle to long-term or highly cell-concentrated assays, which are extremely relevant for multiple applications such as fibrosis or ischaemia. Therefore, we tested surface treatments on cyclic-olefin polymer-based microfluidic devices (COP-MD) to promote the immobilisation of collagen as a 3D matrix protein. Thus, we compared three surface treatments in COP devices for culturing human cardiac fibroblasts (HCF) embedded in collagen hydrogels. We determined the immobilisation efficiency of collagen hydrogel by quantifying the hydrogel transversal area within the devices at the studied time points. Altogether, our results indicated that surface modification with polyacrylic acid photografting (PAA-PG) of COP-MD is the most effective treatment to avoid the quick collapse of collagen hydrogels. As a proof-of-concept experiment, and taking advantage of the low-gas permeability properties of COP-MD, we studied the application of PAA-PG pre-treatment to generate a self-induced ischaemia model. Different necrotic core sizes were developed depending on initial HCF density seeding with no noticeable gel collapse. We conclude that PAA-PG allows long-term culture, gradient generation and necrotic core formation of contractile cell types such as myofibroblasts. This novel approach will pave the way for new relevant in vitro co-culture models where fibroblasts play a key role such as wound healing, tumour microenvironment and ischaemia within microfluidic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photomechanical response under physiological conditions of azobenzene-containing 4D-printed liquid crystal elastomer actuators

  • Ceamanos, L.
  • Mulder, D. J.
  • Kahveci, Z.
  • López-Valdeolivas, M.
  • Schenning, A. P. H. J.
  • Sánchez-Somolinos, C.
Soft and mechanically responsive actuators hold the promise to revolutionize the design and manufacturing of devices in the areas of microfluidics, soft robotics and biomedical engineering. In many of these applications, the actuators need to operate in a wet environment that can strongly affect their performance. In this paper, we report on the photomechanical response in a biological buffer of azobenzene-containing liquid crystal elastomer (LCE)-based actuators, prepared by four-dimensional (4D) printing. Although the photothermal contribution to the photoresponse is largely cancelled by the heat withdrawing capacity of the employed buffer, a significant photoinduced reversible contraction, in the range of 7% of its initial length, has been achieved under load, taking just a few seconds to reach half of the maximum contraction. Effective photomechanical work performance under physiological conditions has, therefore, been demonstrated in the 4D-printed actuators. Advantageously, the photomechanical response is not sensitive to salts present in the buffer differently to hydrogels with responses highly dependent on the fluid composition. Our work highlights the capabilities of photomechanical actuators, created using 4D printing, when operating under physiological conditions, thus showing their potential for application in the microfluidics and biomedical fields.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Remote activation of enzyme nanohybrids for cancer prodrug therapy controlled by magnetic heating

  • Torres-Herrero, B.
  • Armenia, I.
  • Alleva, M.
  • Asín, L.
  • Correa, S.
  • Ortiz, C.
  • Fernández-Afonso, Y.
  • Gutiérrez, L.
  • Martínez De la Fuente, J.
  • Betancor, L.
  • Grazú, V.
Herein, we have developed nanohybrids (nHs) to remotely activate a therapeutic enzyme for its use in Directed Enzyme Prodrug Therapy (DEPT). The coencapsulation of magnetic nanoparticles (MNPs) with horseradish peroxidase (HRP) using biomimetic silica as an entrapment matrix was optimized to obtain nanosized hybrids (∼150 nm) for remote activation of the therapeutic enzyme. HRP converts indole-3-acetic acid (3IAA) into peroxylated radicals, whereas MNPs respond to alternating magnetic fields (AMFs) becoming local hotspots. The AMF application triggered an increase in the bioconversion rate of HRP matching the activity displayed at the optimal temperature of the nHs (Topt = 50 °C) without altering the temperature of the reaction media. This showed that enzyme nanoactuation is possible with MNPs even if they are not covalently bound. After an extensive physicochemical/magnetic characterization, the spatial location of each component of the nH was deciphered, and an insulating role of the silica matrix was suggested as critical for introducing remote control over HRP. In vitro assays, using a human pancreatic cancer cell line (MIA PaCa-2), showed that only upon exposure to AMF and in the presence of the prodrug, the enzyme-loaded nHs triggered cell death. Moreover, in vivo experiments showed higher reductions in the tumor volume growth in those animals treated with nHs in the presence of 3IAA when exposed to AMF. Thus, this work demonstrates the feasibility of developing a spatiotemporally controlled DEPT strategy to overcome unwanted off-target effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Mechanical and Biological Performance of Photopolymerized Gelatin-Based Hydrogels as a Function of the Reaction Media

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization has evolved extensively. Several properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, the influence of the reaction media (RM) and swelling media (SM)–phosphate buffered saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations–is described in gelatin methacrylamide (GelMA) hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco‐2 and HCT‐116). All scaffolds are UV‐photocrosslinked under identical conditions and evaluated for mass swelling ratio and stiffness. The results indicate that stiffness is highly susceptible to the RM, but not to the SM. Additionally, PBS‐prepared hydrogels exhibited a higher photopolymerization degree according to high resolution magic‐angle spinning (HR‐MAS) NMR. These findings correlate with the biological response of Caco‐2 and HCT‐116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation are excellent for both cell lines, and Caco‐2 cells displayed a characteristic apical‐basal polarization based on F‐actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multimodal and Multistimuli 4D-Printed Magnetic Composite Liquid Crystal Elastomer Actuators

  • Espíndola-Pérez, Erick R.
  • Campo, Javier
  • Sánchez-Somolinos, Carlos
Liquid crystal elastomer (LCE)-based soft actuators are being studied for their significant shape-changing abilities when they are exposed to heat or light. Nevertheless, their relatively slow response compared with soft magnetic materials limits their application possibilities. Integration of magnetic responsiveness with LCEs has been previously attempted; however, the LCE response is typically jeopardized in high volumes of magnetic microparticles (MMPs). Here, a multistimuli, magnetically active LCE (MLCE), capable of producing programmable and multimodal actuation, is presented. The MLCE, composed of MMPs within an LCE matrix, is generated through extrusion-based 4D printing that enables digital control of mesogen orientation even at a 1:1 (LCE:MMPs) weight ratio, a challenging task to accomplish with other methods. The printed actuators can significantly deform when thermally actuated as well as exhibit fast response to magnetic fields. When combining thermal and magnetic stimuli, modes of actuation inaccessible with only one input are achieved. For instance, the actuator is reconfigured into various states by using the heat-mediated LCE response, followed by subsequent magnetic addressing. The multistimuli capabilities of the MLCE composite expand its applicability where common LCE actuators face limitations in speed and precision. To illustrate, a beam-steering device developed by using these materials is presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reprogrammable 4D printed liquid crystal elastomer photoactuators by means of light-reversible perylene diimide radicals

  • Montesino, Lorena
  • Martínez, Jesús I.
  • Sánchez-Somolinos, Carlos
Reconfigurable soft actuators can be programmed to morph into different 3D shapes under the same stimulus exhibiting great potential for adaptive robotic functionalities. Liquid crystalline crosslinked materials programmed and controlled by light have demonstrated great potential in this area, however, their implementation is mainly based on azobenzene chromophores, using ultraviolet light that can potentially damage the device and its surroundings, especially if living cells are present. Here, an ink is presented, containing a green‐absorbing perylene diimide chromophore, to prepare light active liquid crystalline elastomer (LCE) actuators via direct ink writing. Green light irradiation of the LCE elements leads to photothermal actuation, but also to new absorption bands in the far‐red and near‐infrared, ascribed to the formation of radical species. Far‐red irradiation results in mechanical actuation and, advantageously, a recovery of the original absorption spectrum. This reversible transformation enables spatial reconfigurability of the actuator's response to far‐red light. The reconfigurable system gives access to complex deformation modes by simply exciting the element with homogeneous far‐red light, without the need for any structural modification of the actuator. This material strategy, using green and far‐red light, less harmful than ultraviolet, shows significant promise for future development of reconfigurable actuators for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of gelatin-based hydrogels for colon and pancreas studies using 3D in vitro cell culture

  • Pamplona, Regina
  • González-Lana, Sandra
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
Biomimetic 3D models emerged some decades ago to address 2D cell culture limitations in the field of replicating biological phenomena, structures or functions found in nature. The fabrication of hydrogels for cancer disease research enables the study of cell processes including growth, proliferation and migration and their 3D design is based on the encapsulation of tumoral cells within a tunable matrix. In this work, a platform of gelatin methacrylamide (GelMA)-based photocrosslinked scaffolds with embedded colorectal (HCT-116) or pancreatic (MIA PaCa-2) cancer cells is presented. Prior to cell culture, the mechanical characterization of hydrogels was assessed in terms of stiffness and swelling behavior. Modifications of the UV curing time enabled a fine tuning of the mechanical properties, which at the same time, showed susceptibility to the chemical composition and crosslinking mechanism. All scaffolds displayed excellent cytocompatibility with both tumoral cells while eliciting various cell responses depending on the microenvironment features. Individual and collective cell migration were observed for HCT-116 and MIA PaCa-2 cell lines, highlighting the ability of the colorectal cancer cells to cluster into aggregates of different sizes governed by the surrounding matrix. Additionally, metabolic activity results pointed out to the development of a more proliferative phenotype within stiffer networks. These findings confirm the suitability of the presented platform of GelMA-based hydrogels to conduct 3D cell culture experiments and explore biological processes associated with colorectal and pancreatic cancer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photochemically Induced Propulsion of a 4D Printed Liquid Crystal Elastomer Biomimetic Swimmer

  • Sartori, Paolo
  • Yadav, Rahul Singh
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape‐changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene‐containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate‐intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four‐lapped ephyra‐like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate‐intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light‐fueled robotic LCE free‐swimmers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Opportunities for nanomaterials in enzyme therapy

  • Torres-Herrero, Beatriz
  • Armenia, Ilaria
  • Ortiz, Cecilia
  • Martínez de la Fuente, Jesús
  • Betancor, Lorena
  • Grazú, Valeria
In recent years, enzyme therapy strategies have rapidly evolved to catalyze essential biochemical reactions with therapeutic potential. These approaches hold particular promise in addressing rare genetic disorders, cancer treatment, neurodegenerative conditions, wound healing, inflammation management, and infectious disease control, among others. There are several primary reasons for the utilization of enzymes as therapeutics: their substrate specificity, their biological compatibility, and their ability to generate a high number of product molecules per enzyme unit. These features have encouraged their application in enzyme replacement therapy where the enzyme serves as the therapeutic agent to rectify abnormal metabolic and physiological processes, enzyme prodrug therapy where the enzyme initiates a clinical effect by activating prodrugs, and enzyme dynamic or starving therapy where the enzyme acts upon host substrate molecules. Currently, there are >20 commercialized products based on therapeutic enzymes, but approval rates are considerably lower than other biologicals. This has stimulated nanobiotechnology in the last years to develop nanoparticle-based solutions that integrate therapeutic enzymes. This approach aims to enhance stability, prevent rapid clearance, reduce immunogenicity, and even enable spatio-temporal activation of the therapeutic catalyst. This comprehensive review delves into emerging trends in the application of therapeutic enzymes, with a particular emphasis on the synergistic opportunities presented by incorporating enzymes into nanomaterials. Such integration holds the promise of enhancing existing therapies or even paving the way for innovative nanotherapeutic approaches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Harnessing the power of thermosensitive liposomes with gold nanoprisms and silica for controlled drug delivery in combined chemotherapy and phototherapy

  • Rubio-Camacho, Marta
  • Cuestas-Ayllón, Carlos
  • Torres-Herrero, Beatriz
  • Martínez-Tomé, María José
  • Martínez de la Fuente, Jesús
  • Mateo, C. Reyes
In recent years, the scientific community has tried to address the treatment of complex diseases such as cancer in a more appropriate and promising way. Regarding this and benefiting from the unique optical properties of gold nanoprisms (AuNPRs), the physicochemical properties of thermosensitive liposomes (TSLs), and the tunable drug encapsulation and release properties of silica nanoparticles (BioSi@NPs), this study has developed two nanoformulations. These nanoformulations have the potential to integrate chemotherapy and photothermal therapy within a single entity. Once their components were synthesized and characterized separately, two strategies were taken in order to develop these multifunctional nanoformulations: (1) covalent binding of AuNPRs to TSLs and (2) co-encapsulation of both components within BioSi@NPs, without modifying the optical and physicochemical properties of AuNPRs and TSLs. Finally, the suitability of both nanoformulations to carry and release hydrophilic drugs when triggered by a 1064 nm NIR laser has been explored by using the fluorescent probe 5(6)-carboxyfluorescein (CF) as a hydrophilic drug model. Different laser power and time of exposure were also tested evidencing that hydrophilic drugs were only released from TSLs in the presence of AuNPRs and that the drug release profile was dependent on the type of nanoformulation and irradiation conditions used. In conclusion, these multifunctional nanoformulations exhibit promising potential for controlled drug delivery in combined chemotherapy and phototherapy, with the capability to precisely control the release kinetics based on specific therapeutic needs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aligning and Observing the Liquid Crystal Director in 3D Using Small Magnetic Fields and a Wedge-Cell

  • Gulati, Lovish
  • Sánchez-Somolinos, Carlos
  • Giesselmann, Frank
  • Fischer, Peer
The mechanical and optical properties of liquid crystalline materials are largely dependent on the director profile. More complex soft robotic functions and programmed optical properties require spatially varying director profiles, ideally in 3D. However, it is challenging to achieve arbitrary director orientation with most established alignment techniques, as one needs to overcome surface interactions, use high electric or magnetic field strengths and temperatures. Another experimental difficulty is that there is a lack of suitable techniques that can be used to characterize the director in 3D. Here, this study first shows that the addition of 5CB to reactive mesogens permits cross‐linked liquid crystalline materials to be fabricated with a spatially varying 3D director profile using weak magnetic fields (0.13 T). This study also shows, how these can be characterized with an optical technique that uses a wedge cell to visualize the programmed 3D director profile. Interestingly, the method also permits the real‐time observation of the director. This work shows that it is possible to precisely control the director in 3D with low magnetic fields and that the dynamics can be directly observed, which facilitates potential applications of soft liquid crystalline (LC) gels and potentially also elastomers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magneto-Photochemically Responsive Liquid Crystal Elastomer for Underwater Actuation

  • Nemati, Yasaman
  • Yang, Qi
  • Sohrabi, Fereshteh
  • Timonen, Jaakko V. I.
  • Sánchez-Somolinos, Carlos
  • Honkanen, Mari
  • Zeng, Hao
  • Priimagi, Arri
The quest for small-scale, remotely controlled soft robots has led to the exploration of magnetic and optical fields for inducing shape morphing in soft materials. Magnetic stimulus excels when navigation in confined or optically opaque environments is required. Optical stimulus, in turn, boasts superior spatial precision and individual control over multiple objects. Herein, we bring these two methodologies together and present a monolithic liquid crystal elastomer (LCE) system that synergistically combines magnetic and photochemical actuation schemes. The resultant composite material showcases versatile possibilities for underwater actuation, and we demonstrate robotic functionalities where the optical and magnetic response can be leveraged in different tasks (object gripping and object translocation, respectively) or where light can be used as a control signal to tune the magnetically induced actuation. Combining these two remote actuation methods offers powerful, dual-mode control in wireless, small-scale robotics, especially in submersed environments due to their isothermal nature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Förster resonance energy Transfer (FRET) demonstrates in vitro chitosan-coated nanocapsules suitability for intranasal brain delivery

  • Alleva, María
  • Baranyai, Zsuzsa
  • Esteban-Pérez, Natalia
  • Martínez-Vicente, Pablo
  • Martín-Rapún, Rafael
  • Moros, María
  • Martínez de la Fuente, Jesús
Intranasal drug delivery to the brain offers a promising strategy to overcome biological barriers. Chitosan-coated nanoemulsion-based nanocapsules demonstrate significant potential due to their mucoadhesive properties, ability to permeate epithelial cells, and ability to solubilize poorly water-soluble drugs, making them ideal candidates for bypassing the blood-brain barrier and overcoming the nasal mucosa. To ensure effective drug delivery, it is critical to assess the integrity of these nanocapsules during their transit across such barriers. In this study, we employed Förster resonance energy transfer to track the structural integrity of nanocapsules during transport. A simplified in vitro model was established using Calu-3 cells to mimic the mucosal epithelial barrier and Balb-c 3T3 fibroblasts as target cells. Our findings demonstrated that the nanoemulsion core of the nanocapsules successfully crossed the in vitro epithelial barrier and reached target cells while maintaining its structural integrity. These results validate the potential of chitosan-coated nanocapsules as a robust platform for the intranasal delivery of drugs to the brain.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bridging sensing and action: autonomous object sorting by reprogrammable liquid crystal elastomers

  • Montesino, Lorena
  • López-Valdeolivas, María
  • Martínez, Jesús I.
  • Sánchez-Somolinos, Carlos
Achieving autonomy in soft robotics requires integrating sensing, planning, and actuation. Stimuli-responsive liquid crystal elastomers (LCEs) are promising for this purpose due to their intrinsic sensory capabilities, adaptability and integrability. Nevertheless, self-regulated LCE systems typically rely on single-mode bending actuators with feedback-type mechanisms, where deformation gradually increases with stimulus intensity but only causes a functional transition beyond a critical activation point. This enables autonomous switching between non-functional and functional states, however, their behavior remains reactive, limiting their ability to perform complex adaptive tasks. Here, we present a reprogrammable LCE actuator capable of autonomously sorting objects based on their green-light transmission properties. Using perylene diimide-doped LCEs and controlled green-light illumination, the actuator senses the optical properties of the object, establishing an actuation plan through spatial radical generation. Subsequent far-red irradiation triggers different actuation modes, enabling selective object sorting. This pattern-encoded actuation allows objects with different optical characteristics to trigger specific mechanical responses under identical illumination conditions. This single-material system, which is optically resettable, integrates sensory feedback, deliberative decision-making, and adaptive mechanical responses. Surpassing the reactive nature of conventional self-regulated LCE systems, our approach advances LCE-based robotics toward greater autonomy, aligning with the sense-plan-act paradigm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Holographic Whole‐Object Photopolymerization Preserving Director Alignment in Liquid Crystalline Actuators

  • Gulati, Lovish
  • Lee, Junhee
  • Norouzikudiani, Reza
  • Li, Jianfeng
  • Sánchez Somolinos, Carlos
  • DeSimone, Antonio
  • Melde, Kai
  • Song, Alexander
  • Fischer, Peer
Liquid crystalline (LC) crosslinked polymeric structures are promising for soft robotic applications, as their actuation profile is intrinsically encoded and results from the structure's shape and the LC molecular orientation (director). However, it remains challenging to fabricate 3D objects and at the same time control the director orientation within the 3D structure. Liquid crystalline molecules are commonly aligned using modified surfaces or electric/magnetic fields. However, additive manufacturing methods may locally distort the director, when fabricating 3D objects. Here, holographic microlithography is employed to form entire connected 3D objects in a single exposure by cross‐linking the LC, while allowing the director orientation within the object to be freely controlled. This enables us to independently choose a global director orientation and then realize complex 3D geometries in a single fabrication step. This approach avoids the director distortion present in sequential 3D printing and lithography methods, and allows for complex actuation profiles that are directly linked to the 3D director orientation. The method presented herein permits the rapid fabrication of complex 3D connected LC structures while preserving the molecular order, and thereby enables the fabrication of more complex 3D soft actuators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

4D Printable Formulations of Mixed Low and High Molecular Weight Liquid Crystalline Units: A Versatile Route to Functional Soft Actuators

  • Ceamanos, Lorena
  • López-Valdeolivas, María
  • Lyu, Pengrong
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
Over the last few years, 4D printing of liquid crystal elastomers (LCEs) has been explored to develop actuators with significant, reversible, and anisotropic shape changes upon external stimuli such as heat or light. Most reported ink formulations rely on photo-curable liquid crystal materials derived from high molecular weight (MW) main-chain macromers. Their rheological properties allow to program molecular alignment during direct ink writing. In contrast, formulations composed mainly of monoacrylate or diacrylate low MW mesogens are unsuitable for extrusion-based 4D printing as they fail to promote mesogen alignment during printing. This shortcoming restricts the range of chemical and physical compositions accessible to 4D printing. Here, we introduce a practical route for formulating 4D printable inks that integrate low MW mesogens. By adding an acrylate-ended macromer to the low MW constituents, these mixtures become suitable for direct ink writing. This enables the preparation of multi-functional actuators with digitally controlled director morphology and tailored properties, for example, stiffness and actuation strain, as well as light-responsive behavior when photoactive molecules are used. These results highlight the versatility of the method and suggest its potential compatibility with other functional low MW units, such as those responsive to electrical or pH stimuli.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Delayed crosslinking enables ultra-high-resolution melt electrowriting of responsive liquid crystal elastomers

  • Javadzadeh, Mehrzad
  • Fernández-Melero, María
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
Melt electrowriting (MEW) enables the fabrication of finely structured scaffolds with sub-micrometer resolution. However, reducing the inter-fiber distance (IFD) in MEW remains challenging due to electrostatic interactions between the charged polymer jet and previously deposited fibers, often leading to fiber bridging. Recently, we demonstrated that MEW of reactive liquid crystalline inks, followed by ultraviolet (UV) photopolymerization, enables the fabrication of digitally positioned liquid crystal elastomer (LCE) structures. Building on this, we demonstrate that tuning the UV light intensity during photopolymerization significantly improves the achievable resolution range. Lower UV intensities produce smaller minimum IFDs without fiber bridging, enabling the fabrication of highly ordered structures with IFDs down to 11 µm for 5 µm-diameter fibers, a feature that, to the best of our knowledge, surpasses the smallest IFDs previously reported for MEW. We hypothesize that slower crosslinking kinetics extend the time window for charge dissipation, reducing electrostatic interactions between the jet and the previously deposited fibers. Although the mechanism remains unclear, local variations in material flow or curing-induced surface morphology may also affect electric field distribution. Beyond resolution improvements, this strategy enables defect-free fabrication of stimuli-responsive LCEs with programmable shape transformation and actuation. UV light intensity thus emerges as a critical design parameter for MEW, with implications for other photo-crosslinkable systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled release of glucocorticoid via PLGA nanoparticles for modulating macrophage polarization in inflammation situations

  • Esteban-Pérez, Natalia
  • Del Sol-Fernández, Susel
  • Martín-Rapún, Rafael
  • Martínez de la Fuente, Jesús
Glucocorticoids are among the most widely used anti-inflammatory and immunosuppressive drugs. However, their prolonged administration is associated with a wide range of adverse side effects including long-lasting immunosuppression. In this study, we aimed to encapsulate two commonly used glucocorticoids with different potency and duration, hydrocortisone and dexamethasone, into poly(lactic-co-glycolic acid) (PLGA) nanoparticles with the goal to modulate inflammatory gene expression in a delivery-dependent manner. We evaluated their anti-inflammatory properties in two in vitro models varying the timing of treatment administration based on lipopolysaccharide M1-polarized macrophages, key effectors of the innate immune system. Our results demonstrated that, for both strategies, drug-loaded nanoparticles significantly reduced the expression of interleukin-6, a pro-inflammatory cytokine, compared to the free drugs. However, in one of the strategies, while free drugs induced upregulation of interleukin-10, a key anti-inflammatory cytokine, no such effect was observed with the nanoparticle-based formulations. Overall, these results demonstrate that PLGA nanoparticles enable sustained glucocorticoid delivery and modulate inflammatory gene expression in activated macrophages in a delivery- and timing-dependent manner, providing comparative insight into how glucocorticoid delivery via PLGA nanoparticles shapes inflammatory gene regulation depending on treatment timing and highlighting the importance of in vitro model design.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Approaching gold‐standard sensitivity in a portable and versatile gold nanoprisms thermoplasmonic platform for lateral flow detection of biomolecules

  • Cuestas Ayllón, Carlos
  • Martín Barreiro, Alba
  • García Barrientos, África
  • Moros, María
  • Grazú Bonavía, Valeria
  • Martínez de la Fuente, Jesús
Plasmonic nanoparticles exhibit unique optical and thermal properties that make them ideal for next‐generation diagnostic technologies. Among them, gold nanoprisms (AuNPrs) are especially powerful due to their anisotropic geometry, tunable surface plasmon resonance in the near‐infrared (NIR) region, and high photothermal conversion efficiency. These features transform them from passive labels into active nanotransducers capable of amplifying diagnostic signals. Building on these advantages, we developed two AuNPr‐based sensing platforms: Thermo Lateral Flow Immunoassay (ThermoLFIA) and Thermo Oligonucleotide‐based Lateral Flow Assay (ThermoOLFA). By coupling AuNPrs with thermoresponsive substrates, both systems use localized heat generation to boost analytical sensitivity, enabling visual enhancement far beyond that of conventional gold spheres. ThermoLFIA demonstrated clinically relevant detection of gastrointestinal cancer biomarkers (CEA, CA19‐9, VEGF), outperforming standard ELISA tests. In parallel, functionalization of AuNPrs with DNA probes enabled ThermoOLFA to detect SARS‐CoV‐2 RNA with sensitivity comparable to RT‐qPCR, but without amplification steps and within 25 min. This proof‐of‐concept confirms that plasmonic nanoprisms can drive rapid, portable, and ultrasensitive diagnostics, opening a path toward point‐of‐care platforms with strong clinical and translational potential.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Programming of Complex Magnetic Profiles Enforced by 4D Printed Magnetic LCE Actuators

  • Espíndola-Pérez, Erick R.
  • Goyal, Rahul
  • Gulati, Lovish
  • López-Valdeolivas, María
  • Fischer, Peer
  • Sánchez-Somolinos, Carlos
Magnetic soft actuators enable untethered, contact‐free actuation yet they are fundamentally limited by the difficulty of programming complex, three‐dimensional (3D), spatially non‐uniform magnetic profiles. Here, we introduce a four‐dimensional (4D) printing‐enabled magnetic programming strategy that overcomes this challenge by magnetizing magnetically active liquid crystal elastomers (MLCEs) in thermally actuated target states. Digitally prescribed director architectures define deterministic 3D deformations at elevated temperature, which serve as intrinsic programming templates during magnetization under a spatially uniform magnetic field. Upon cooling, relaxation of the thermomechanical deformation transforms the initially uniform magnetization into a complex, spatially varying magnetic profile that encodes the target shape as a magnetically favoured configuration. This approach enables the recovery of thermally defined shapes at room temperature under low magnetic fields and allows bidirectional and multistate actuation via simple reversal of field direction. By integrating spatial magnetic programming with controlled geometric asymmetry, we demonstrate frequency‐tunable linear locomotion and chirality‐encoded clockwise or anticlockwise rotational motion in multimaterial soft robotic architectures. This strategy decouples magnetic profile complexity from magnetization hardware, providing a scalable, template‐free route to fully 3D magnetic programming for soft robotics and untethered actuators operating under low‐field conditions.