Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stabilization of b-Glucuronidase by Immobilization in Magnetic-Silica Hybrid Supports

  • Correa, S.
  • Ripoll, M.
  • Jackson, E.
  • Grazu, V.
  • Betancor, L.
beta-Glucuronidases are a class of enzymes that catalyze the breakdown of complex carbohydrates. They have well documented biocatalytic applications in synthesis, therapeutics, and analytics that could benefit from enzyme immobilization and stabilization. In this work, we have explored a number of immobilization strategies for Patella vulgata beta-Glucuronidase that comprised a tailored combination of biomimetic silica (Si) and magnetic nanoparticles (MNPs). The individual effect of each material on the enzyme upon immobilization was first tested. Three different immobilization strategies for covalent attachment on MNPs and different three catalysts for the deposition of Si particles were tested. We produced nine different immobilized preparations and only two of them presented negligible activity. All the preparations were in the micro-sized range (from 1299 +/- 52 nm to 2101 +/- 67 nm of hydrodynamic diameter). Their values for polydispersity index varied around 0.3, indicating homogeneous populations of particles with low probability of agglomeration. Storage, thermal, and operational stability were superior for the enzyme immobilized in the composite material. At 80 degrees C different preparations with Si and MNPs retained 40% of their initial activity after 6 h of incubation whereas the soluble enzyme lost 90% of its initial activity within 11 min. Integration of MNPs provided the advantage of reusing the biocatalyst via magnetic separation up to six times with residual activity. The hybrid material produced herein demonstrated its versatility and robustness as a support for beta-Glucuronidases immobilization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On-POM Ring-Opening Polymerisation of N-Carboxyanhydrides

  • Soria-Carrera, H.
  • Franco-Castillo, I.
  • Romero, P.
  • Martin, S.
  • de la Fuente, J.M.
  • Mitchell, S.G.
  • Martin-Rapun, R.
The ring-opening polymerisation of a-amino acid N-carboxyanhydrides (NCAs) offers a simple and scalable route to polypeptides with predicted and narrow molecular weight distributions. Here we show how polyoxometalates (POMs)-redox-active molecular metal-oxide anions-can serve as inorganic scaffold initiators for such NCA polymerisations. This "On-POM polymerisation" strategy serves as an innovative platform to design hybrid materials with additive or synergistic properties stemming from the inorganic and polypeptide component parts. We have used this synthetic approach to synthesise a library of bactericidal poly(lysine)-POM hybrid derivatives that can be used to prevent biofilm formation. This versatile "On-POM polymerisation" method provides a flexible synthetic approach for combining inorganic scaffolds with amino acids, and the potential to tailor and improve the specificity and performance of hybrid antimicrobial materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polyoxometalate-polypeptide nanoassemblies as peroxidase surrogates with antibiofilm properties

  • Soria-Carrera, H.
  • Atrián-Blasco, E.
  • de la Fuente, J. M.
  • Mitchell, S. G.
  • Martín-Rapún, R.
Developing artificial metalloenzymes that possess a superior performance to their natural counterparts is an attractive concept. Polyoxometalates (POMs) are a class of anionic molecular metal-oxides with excellent redox properties and bioactivity. We have recently introduced “POMlymers” - covalently conjugated POM-peptide hybrid materials - where the polypeptide chain is obtained through a ring-opening polymerisation (ROP) of a-amino acid N-carboxyanhydrides (NCA) on an inorganic POM scaffold. Attracted by the idea of preparing artificial metalloenzymes, here we report the supramolecular self-assembly of POMlymer hybrids into nanoparticles where an optimal environment for catalysis is created. Our results demonstrate that the self-assembly of covalent POMlymers, enhances the peroxidase-like activity of the parent POM anion whereas, in contrast, the catalytic activity for nanoparticles obtained by ionic self-assembly of the same peptide and POM components practically disappears. Furthermore, POMlymer nanoparticles also present antimicrobial and antibiofilm activity against the skin bacterium Staphylococcus epidermidis; whereas, ionic POM-peptide hybrids significantly increase biofilm production and endogenous production of reactive oxygen species. In summary, we present the self-assembly of POMlymer hybrids into nanoparticles and a combination of peroxidase activity and microbiology assays that show that the POM-peptide covalent bond is essential for the stability of the self-assembled nanoparticles and therefore for their catalytic and biological activity. © 2022 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Riboflavin–citrate conjugate multicore SPIONs with enhanced magnetic responses and cellular uptake in breast cancer cells

  • Mekseriwattana, Wid
  • Guardia, Pablo
  • Torres Herrero, Beatriz
  • de la Fuente, Jesus M.
  • Kuhakarn, Chutima
  • Roig, Anna
  • Katewongsa, Kanlaya Prapainop
Breast cancer accounts for up to 10% of the newly diagnosed cancer cases worldwide, making it the most common cancer found in women. The use of superparamagnetic iron oxide nanoparticles (SPIONs) has been beneficial in the advancement of contrast agents and magnetic hyperthermia (MH) for the diagnosis and treatment of cancers. To achieve delivery of SPIONs to cancer cells, surface functionalization with specific ligands are required. Riboflavin carrier protein (RCP) has been identified as an alternative target for breast cancer cells. Here, we report a novel riboflavin (Rf)-based ligand that provides SPIONs with enhanced colloidal stability and high uptake potential in breast cancer cells. This is achieved by synthesizing an Rf-citrate ligand. The ligand was tested in a multicore SPION system, and affinity to RCP was assessed by isothermal titration calorimetry which showed a specific, entropy-driven binding. MRI and MH responses of the coated Rf-SPIONs were tested to evaluate the suitability of this system as a theranostic platform. Finally, interaction of the Rf-SPIONs with breast cancer cells was evaluated by in vitro cellular uptake in MCF-7 breast cancer cells. The overall characterization of the Rf-SPIONs highlighted the excellent performance of this platform for theranostic applications in breast cancer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polyoxometalate–peptide hybrid materials: from structure–property relationships to applications

  • Soria-Carrera, Héctor
  • Atrián-Blasco, Elena
  • Martín-Rapún, Rafael
  • Mitchell, Scott G.
Organo-functionalisation of polyoxometalates (POMs) represents an effective approach to obtain diverse arrays of functional structures and materials, where the introduction of organic moieties into the POM molecules can dramatically change their surface chemistry, charge, polarity, and redox properties. The synergistic combination of POMs and peptides, which perform a myriad of essential roles within cellular biochemistry, including protection and transport in living organisms, leads to functional hybrid materials with unique properties. In this Perspective article, we present the principal synthetic routes to prepare and characterise POM–peptide hybrids, together with a comprehensive description of how their properties – such as redox chemistry, stereochemistry and supramolecular self-assembly – give rise to materials with relevant catalytic, adhesive, and biomedical applications. By presenting the state-of-the-art of the POM–peptide field, we show specifically how emerging chemical approaches can be harnessed to develop tailored POM–peptide materials with synergistic properties for applications in a variety of disciplines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning of Mechanical Properties in Photopolymerizable Gelatin-Based Hydrogels for <i>In Vitro</i> Cell Culture Systems

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco’s modified Eagle’s medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Subcellular localization and therapeutic efficacy of polymeric micellar nanoparticles encapsulating bedaquiline for tuberculosis treatment in zebrafish

  • Bhandari, M.
  • Soria-Carrera, H.
  • Wohlmann, J.
  • Knudsen Dal, N. J.
  • Martínez de la Fuente, J.
  • Martín-Rapún, R.
  • Griffiths, G.
  • Fenaroli, F.
The combination drug regimens that have long been used to treat tuberculosis (TB), caused by Mycobacterium tuberculosis, are fraught with problems such as frequent administration, long duration of treatment, and harsh adverse effects, leading to the emergence of multidrug resistance. Moreover, there is no effective preventive vaccine against TB infection. In this context, nanoparticles (NPs) have emerged as a potential alternative method for drug delivery. Encapsulating antibiotics in biodegradable NPs has been shown to provide effective therapy and reduced toxicity against M. tuberculosis in different mammalian models, when compared to conventional free drug administration. Here, we evaluate the localization, therapeutic efficacy and toxic effects of polymeric micellar NPs encapsulating a promising but highly hydrophobic and toxic antitubercular drug bedaquiline (BQ) in zebrafish embryos infected with Mycobacterium marinum. Our study shows that the NP formulation of BQ improves survival and reduces bacterial burden in the infected embryos after treatment when compared to its free form. The intravenously injected BQ NPs have short circulation times due to their rapid and efficient uptake into the endothelial cells, as observed by correlative light and electron microscopy (CLEM).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Surface modifications of COP-based microfluidic devices for improved immobilisation of hydrogel proteins: long-term 3D culture with contractile cell types and ischaemia model

  • González-Lana, Sandra
  • Randelovic, Teodora
  • Ciriza, Jesús
  • López-Valdeolivas, María
  • Monge, Rosa
  • Sánchez-Somolinos, Carlos
  • Ochoa, Ignacio
The tissue microenvironment plays a crucial role in tissue homeostasis and disease progression. However, the in vitro simulation has been limited by the lack of adequate biomimetic models in the last decades. Thanks to the advent of microfluidic technology for cell culture applications, these complex microenvironments can be recreated by combining hydrogels, cells and microfluidic devices. Nevertheless, this advance has several limitations. When cultured in three-dimensional (3D) hydrogels inside microfluidic devices, contractile cells may exert forces that eventually collapse the 3D structure. Disrupting the compartmentalisation creates an obstacle to long-term or highly cell-concentrated assays, which are extremely relevant for multiple applications such as fibrosis or ischaemia. Therefore, we tested surface treatments on cyclic-olefin polymer-based microfluidic devices (COP-MD) to promote the immobilisation of collagen as a 3D matrix protein. Thus, we compared three surface treatments in COP devices for culturing human cardiac fibroblasts (HCF) embedded in collagen hydrogels. We determined the immobilisation efficiency of collagen hydrogel by quantifying the hydrogel transversal area within the devices at the studied time points. Altogether, our results indicated that surface modification with polyacrylic acid photografting (PAA-PG) of COP-MD is the most effective treatment to avoid the quick collapse of collagen hydrogels. As a proof-of-concept experiment, and taking advantage of the low-gas permeability properties of COP-MD, we studied the application of PAA-PG pre-treatment to generate a self-induced ischaemia model. Different necrotic core sizes were developed depending on initial HCF density seeding with no noticeable gel collapse. We conclude that PAA-PG allows long-term culture, gradient generation and necrotic core formation of contractile cell types such as myofibroblasts. This novel approach will pave the way for new relevant in vitro co-culture models where fibroblasts play a key role such as wound healing, tumour microenvironment and ischaemia within microfluidic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluating the durability and performance of polyoxometalate-ionic liquid coatings on calcareous stones: Preventing biocolonisation in outdoor environments

  • Eyssautier-Chuine, S.
  • Franco-Castillo, I.
  • Misra, A.
  • Hubert, J.
  • Vaillant-Gaveau, N.
  • Streb, C.
  • Mitchell, S. G.
Rock-based materials exposed to outdoor environments are naturally colonised by an array of microorganisms, which can cause dissolution and fracturing of the natural stone. Biocolonisation of monuments and architectures of important cultural heritage therefore represents an expensive and recurring problem for local authorities and private owners alike. In this area, preventive strategies to mitigate biocolonisation are generally preferred to curative approaches, such as mechanical cleaning by brush or high-pressure cleaning, to remove pre-existing patina. The aim of this work was to study the interaction between biocidal polyoxometalate-ionic liquid (POM-IL) coatings and calcareous stones and evaluate the capacity of these coatings to prevent biocolonisation through a series of accelerated ageing studies in climate chambers, carried out in parallel with a two-year period of outdoor exposure in north-eastern France. Our experiments show that POM-IL coatings did not affect water vapour transfer nor significantly alter the total porosity of the calcareous stones. Simulated weathering studies replicating harsh (hot and wet) climatic weather conditions demonstrated that the colour variation of POM-IL-coated stones did not vary significantly with respect to the natural uncoated stones. Accelerated biocolonisation studies performed on the weathered POM-IL-coated stones proved that the coatings were still capable of preventing colonisation by an algal biofilm. However, a combination of colour measurements, chlorophyll fluorescence data, and scanning electron microscopy imaging of stones aged outdoors in northern France for two years showed that coated and uncoated stone samples showed signs of colonisation by fungal mycelium and phototrophs. Altogether, our results demonstrate that POM-ILs are suitable as preventative biocidal coatings for calcareous stones, but the correct concentrations must be chosen to achieve a balance between porosity of the stone, the resulting colour variation and the desired duration of the biocidal effect over longer periods of time, particularly in outdoor environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Remote activation of enzyme nanohybrids for cancer prodrug therapy controlled by magnetic heating

  • Torres-Herrero, B.
  • Armenia, I.
  • Alleva, M.
  • Asín, L.
  • Correa, S.
  • Ortiz, C.
  • Fernández-Afonso, Y.
  • Gutiérrez, L.
  • Martínez De la Fuente, J.
  • Betancor, L.
  • Grazú, V.
Herein, we have developed nanohybrids (nHs) to remotely activate a therapeutic enzyme for its use in Directed Enzyme Prodrug Therapy (DEPT). The coencapsulation of magnetic nanoparticles (MNPs) with horseradish peroxidase (HRP) using biomimetic silica as an entrapment matrix was optimized to obtain nanosized hybrids (∼150 nm) for remote activation of the therapeutic enzyme. HRP converts indole-3-acetic acid (3IAA) into peroxylated radicals, whereas MNPs respond to alternating magnetic fields (AMFs) becoming local hotspots. The AMF application triggered an increase in the bioconversion rate of HRP matching the activity displayed at the optimal temperature of the nHs (Topt = 50 °C) without altering the temperature of the reaction media. This showed that enzyme nanoactuation is possible with MNPs even if they are not covalently bound. After an extensive physicochemical/magnetic characterization, the spatial location of each component of the nH was deciphered, and an insulating role of the silica matrix was suggested as critical for introducing remote control over HRP. In vitro assays, using a human pancreatic cancer cell line (MIA PaCa-2), showed that only upon exposure to AMF and in the presence of the prodrug, the enzyme-loaded nHs triggered cell death. Moreover, in vivo experiments showed higher reductions in the tumor volume growth in those animals treated with nHs in the presence of 3IAA when exposed to AMF. Thus, this work demonstrates the feasibility of developing a spatiotemporally controlled DEPT strategy to overcome unwanted off-target effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Mechanical and Biological Performance of Photopolymerized Gelatin-Based Hydrogels as a Function of the Reaction Media

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization has evolved extensively. Several properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, the influence of the reaction media (RM) and swelling media (SM)–phosphate buffered saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations–is described in gelatin methacrylamide (GelMA) hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco‐2 and HCT‐116). All scaffolds are UV‐photocrosslinked under identical conditions and evaluated for mass swelling ratio and stiffness. The results indicate that stiffness is highly susceptible to the RM, but not to the SM. Additionally, PBS‐prepared hydrogels exhibited a higher photopolymerization degree according to high resolution magic‐angle spinning (HR‐MAS) NMR. These findings correlate with the biological response of Caco‐2 and HCT‐116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation are excellent for both cell lines, and Caco‐2 cells displayed a characteristic apical‐basal polarization based on F‐actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

From Bench to Cell: A Roadmap for Assessing the Bioorthogonal "Click" Reactivity of Magnetic Nanoparticles for Cell Surface Engineering

  • Idiago-Lopez, Javier
  • Moreno-Antolin, Eduardo
  • Eceiza, Maite
  • Aizpurua, Jesus M.
  • Grazu, Valeria
  • Martínez de la Fuente, Jesús
  • Fratila, Raluca M.
In this work, we report the use of bioorthogonal chemistry, specifically the strain-promoted click azide-alkyne cyclo-addition (SPAAC) for the covalent attachment of magnetic nano-particles (MNPs) on living cell membranes. Four types of MNPs were prepared, functionalized with two different stabilizing/passivation agents (a polyethylene glycol derivative and a glucopyranoside derivative, respectively) and two types of strained alkynes with different reactivities: a cyclooctyne (CO) derivative and a dibenzocyclooctyne (DBCO) derivative. The MNPs were extensively characterized in terms of physicochemical characteristics, colloidal stability, and click reactivity in suspension. Then, the reactivity of the MNPs toward azide-modified surfaces was evaluated as a closer approach to their final application in a living cell scenario. Finally, the DBCO-modified MNPs, showing superior reactivity in suspension and on surfaces, were selected for cell membrane immobilization via the SPAAC reaction on the membranes of cells engineered to express azide artificial reporters. Overall, our work provides useful insights into the appropriate surface engineering of nanoparticles to ensure a high performance in terms of bioorthogonal reactivity for biological applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A simple and versatile strategy for oriented immobilization of his-tagged proteins on magnetic nanoparticles

  • Castro-Hinojosa, Christian
  • Del Sol-Fernández, Susel
  • Moreno-Antolín, Eduardo
  • Martín-Gracia, Beatriz
  • Ovejero, Jesús G.
  • Martínez de la Fuente, Jesús
  • Grazú, Valeria
  • Fratila, Raluca M.
  • Moros, María
Oriented and covalent immobilization of proteins on magnetic nanoparticles (MNPs) is particularly challenging as it requires both the functionality of the protein and the colloidal stability of the MNPs to be preserved. Here, we describe a simple, straightforward, and efficient strategy for MNP functionalization with proteins using metal affinity binding. Our method involves a single-step process where MNPs are functionalized using a preformed, ready-to-use nitrilotriacetic acid-divalent metal cation (NTA-M2+) complex and polyethylene glycol (PEG) molecules. As a proof-of-concept, we demonstrate the oriented immobilization of a recombinant cadherin fragment engineered with a hexahistidine tag (6His-tag) onto the MNPs. Our developed methodology is simple and direct, enabling the oriented bioconjugation of His-tagged cadherins to MNPs while preserving protein functionality and the colloidal stability of the MNPs, and could be extended to other proteins expressing a polyhistidine tag. When compared to the traditional method where NTA is first conjugated to the MNPs and afterward free metal ions are added to form the complex, this novel strategy results in a higher functionalization efficiency while avoiding MNP aggregation. Additionally, our method allows for covalent bonding of the cadherin fragments to the MNP surface while preserving functionality, making it highly versatile. Finally, our strategy not only ensures the correct orientation of the protein fragments on the MNPs but also allows for the precise control of their density. This feature enables the selective targeting of E-cadherin-expressing cells only when MNPs are decorated with a high density of cadherin fragments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multimodal and Multistimuli 4D-Printed Magnetic Composite Liquid Crystal Elastomer Actuators

  • Espíndola-Pérez, Erick R.
  • Campo, Javier
  • Sánchez-Somolinos, Carlos
Liquid crystal elastomer (LCE)-based soft actuators are being studied for their significant shape-changing abilities when they are exposed to heat or light. Nevertheless, their relatively slow response compared with soft magnetic materials limits their application possibilities. Integration of magnetic responsiveness with LCEs has been previously attempted; however, the LCE response is typically jeopardized in high volumes of magnetic microparticles (MMPs). Here, a multistimuli, magnetically active LCE (MLCE), capable of producing programmable and multimodal actuation, is presented. The MLCE, composed of MMPs within an LCE matrix, is generated through extrusion-based 4D printing that enables digital control of mesogen orientation even at a 1:1 (LCE:MMPs) weight ratio, a challenging task to accomplish with other methods. The printed actuators can significantly deform when thermally actuated as well as exhibit fast response to magnetic fields. When combining thermal and magnetic stimuli, modes of actuation inaccessible with only one input are achieved. For instance, the actuator is reconfigured into various states by using the heat-mediated LCE response, followed by subsequent magnetic addressing. The multistimuli capabilities of the MLCE composite expand its applicability where common LCE actuators face limitations in speed and precision. To illustrate, a beam-steering device developed by using these materials is presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reprogrammable 4D printed liquid crystal elastomer photoactuators by means of light-reversible perylene diimide radicals

  • Montesino, Lorena
  • Martínez, Jesús I.
  • Sánchez-Somolinos, Carlos
Reconfigurable soft actuators can be programmed to morph into different 3D shapes under the same stimulus exhibiting great potential for adaptive robotic functionalities. Liquid crystalline crosslinked materials programmed and controlled by light have demonstrated great potential in this area, however, their implementation is mainly based on azobenzene chromophores, using ultraviolet light that can potentially damage the device and its surroundings, especially if living cells are present. Here, an ink is presented, containing a green‐absorbing perylene diimide chromophore, to prepare light active liquid crystalline elastomer (LCE) actuators via direct ink writing. Green light irradiation of the LCE elements leads to photothermal actuation, but also to new absorption bands in the far‐red and near‐infrared, ascribed to the formation of radical species. Far‐red irradiation results in mechanical actuation and, advantageously, a recovery of the original absorption spectrum. This reversible transformation enables spatial reconfigurability of the actuator's response to far‐red light. The reconfigurable system gives access to complex deformation modes by simply exciting the element with homogeneous far‐red light, without the need for any structural modification of the actuator. This material strategy, using green and far‐red light, less harmful than ultraviolet, shows significant promise for future development of reconfigurable actuators for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photochemically Induced Propulsion of a 4D Printed Liquid Crystal Elastomer Biomimetic Swimmer

  • Sartori, Paolo
  • Yadav, Rahul Singh
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape‐changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene‐containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate‐intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four‐lapped ephyra‐like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate‐intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light‐fueled robotic LCE free‐swimmers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Opportunities for nanomaterials in enzyme therapy

  • Torres-Herrero, Beatriz
  • Armenia, Ilaria
  • Ortiz, Cecilia
  • Martínez de la Fuente, Jesús
  • Betancor, Lorena
  • Grazú, Valeria
In recent years, enzyme therapy strategies have rapidly evolved to catalyze essential biochemical reactions with therapeutic potential. These approaches hold particular promise in addressing rare genetic disorders, cancer treatment, neurodegenerative conditions, wound healing, inflammation management, and infectious disease control, among others. There are several primary reasons for the utilization of enzymes as therapeutics: their substrate specificity, their biological compatibility, and their ability to generate a high number of product molecules per enzyme unit. These features have encouraged their application in enzyme replacement therapy where the enzyme serves as the therapeutic agent to rectify abnormal metabolic and physiological processes, enzyme prodrug therapy where the enzyme initiates a clinical effect by activating prodrugs, and enzyme dynamic or starving therapy where the enzyme acts upon host substrate molecules. Currently, there are >20 commercialized products based on therapeutic enzymes, but approval rates are considerably lower than other biologicals. This has stimulated nanobiotechnology in the last years to develop nanoparticle-based solutions that integrate therapeutic enzymes. This approach aims to enhance stability, prevent rapid clearance, reduce immunogenicity, and even enable spatio-temporal activation of the therapeutic catalyst. This comprehensive review delves into emerging trends in the application of therapeutic enzymes, with a particular emphasis on the synergistic opportunities presented by incorporating enzymes into nanomaterials. Such integration holds the promise of enhancing existing therapies or even paving the way for innovative nanotherapeutic approaches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aligning and Observing the Liquid Crystal Director in 3D Using Small Magnetic Fields and a Wedge-Cell

  • Gulati, Lovish
  • Sánchez-Somolinos, Carlos
  • Giesselmann, Frank
  • Fischer, Peer
The mechanical and optical properties of liquid crystalline materials are largely dependent on the director profile. More complex soft robotic functions and programmed optical properties require spatially varying director profiles, ideally in 3D. However, it is challenging to achieve arbitrary director orientation with most established alignment techniques, as one needs to overcome surface interactions, use high electric or magnetic field strengths and temperatures. Another experimental difficulty is that there is a lack of suitable techniques that can be used to characterize the director in 3D. Here, this study first shows that the addition of 5CB to reactive mesogens permits cross‐linked liquid crystalline materials to be fabricated with a spatially varying 3D director profile using weak magnetic fields (0.13 T). This study also shows, how these can be characterized with an optical technique that uses a wedge cell to visualize the programmed 3D director profile. Interestingly, the method also permits the real‐time observation of the director. This work shows that it is possible to precisely control the director in 3D with low magnetic fields and that the dynamics can be directly observed, which facilitates potential applications of soft liquid crystalline (LC) gels and potentially also elastomers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magneto-Photochemically Responsive Liquid Crystal Elastomer for Underwater Actuation

  • Nemati, Yasaman
  • Yang, Qi
  • Sohrabi, Fereshteh
  • Timonen, Jaakko V. I.
  • Sánchez-Somolinos, Carlos
  • Honkanen, Mari
  • Zeng, Hao
  • Priimagi, Arri
The quest for small-scale, remotely controlled soft robots has led to the exploration of magnetic and optical fields for inducing shape morphing in soft materials. Magnetic stimulus excels when navigation in confined or optically opaque environments is required. Optical stimulus, in turn, boasts superior spatial precision and individual control over multiple objects. Herein, we bring these two methodologies together and present a monolithic liquid crystal elastomer (LCE) system that synergistically combines magnetic and photochemical actuation schemes. The resultant composite material showcases versatile possibilities for underwater actuation, and we demonstrate robotic functionalities where the optical and magnetic response can be leveraged in different tasks (object gripping and object translocation, respectively) or where light can be used as a control signal to tune the magnetically induced actuation. Combining these two remote actuation methods offers powerful, dual-mode control in wireless, small-scale robotics, especially in submersed environments due to their isothermal nature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decoupling manufacturing from application in additive manufactured antimicrobial materials

  • Wales , D.J.
  • Miralles-Comins, S.
  • Franco-Castillo, I.
  • Cameron, J.M.
  • Cao, Q.
  • Karjalainen, E.
  • Alves Fernandes, J.
  • Newton, G.N.
  • Mitchell, S.G.
  • Sans, V.
3D printable materials based on polymeric ionic liquids (PILs) capable of controlling the synthesis and stabilisation of silver nanoparticles (AgNPs) and their synergistic antimicrobial activity are reported. The interaction of the ionic liquid moieties with the silver precursor enabled the controlled in situ formation and stabilisation of AgNPs via extended UV photoreduction after the printing process, thus demonstrating an effective decoupling of the device manufacturing from the on-demand generation of nanomaterials, which avoids the potential aging of the nanomaterials through oxidation. The printed devices showed a multi-functional and tuneable microbicidal activity against Gram positive (B. subtilis) and Gram negative (E. coli) bacteria and against the mould Aspergillus niger. While the polymeric material alone was found to be bacteriostatic, the AgNPs conferred bactericidal properties to the material. Combining PIL-based materials with functionalities, such as in situ and photoactivated on-demand fabricated antimicrobial AgNPs, provides a synergistic functionality that could be harnessed for a variety of applications, especially when coupled to the freedom of design inherent to additive manufacturing techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Förster resonance energy Transfer (FRET) demonstrates in vitro chitosan-coated nanocapsules suitability for intranasal brain delivery

  • Alleva, María
  • Baranyai, Zsuzsa
  • Esteban-Pérez, Natalia
  • Martínez-Vicente, Pablo
  • Martín-Rapún, Rafael
  • Moros, María
  • Martínez de la Fuente, Jesús
Intranasal drug delivery to the brain offers a promising strategy to overcome biological barriers. Chitosan-coated nanoemulsion-based nanocapsules demonstrate significant potential due to their mucoadhesive properties, ability to permeate epithelial cells, and ability to solubilize poorly water-soluble drugs, making them ideal candidates for bypassing the blood-brain barrier and overcoming the nasal mucosa. To ensure effective drug delivery, it is critical to assess the integrity of these nanocapsules during their transit across such barriers. In this study, we employed Förster resonance energy transfer to track the structural integrity of nanocapsules during transport. A simplified in vitro model was established using Calu-3 cells to mimic the mucosal epithelial barrier and Balb-c 3T3 fibroblasts as target cells. Our findings demonstrated that the nanoemulsion core of the nanocapsules successfully crossed the in vitro epithelial barrier and reached target cells while maintaining its structural integrity. These results validate the potential of chitosan-coated nanocapsules as a robust platform for the intranasal delivery of drugs to the brain.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bridging sensing and action: autonomous object sorting by reprogrammable liquid crystal elastomers

  • Montesino, Lorena
  • López-Valdeolivas, María
  • Martínez, Jesús I.
  • Sánchez-Somolinos, Carlos
Achieving autonomy in soft robotics requires integrating sensing, planning, and actuation. Stimuli-responsive liquid crystal elastomers (LCEs) are promising for this purpose due to their intrinsic sensory capabilities, adaptability and integrability. Nevertheless, self-regulated LCE systems typically rely on single-mode bending actuators with feedback-type mechanisms, where deformation gradually increases with stimulus intensity but only causes a functional transition beyond a critical activation point. This enables autonomous switching between non-functional and functional states, however, their behavior remains reactive, limiting their ability to perform complex adaptive tasks. Here, we present a reprogrammable LCE actuator capable of autonomously sorting objects based on their green-light transmission properties. Using perylene diimide-doped LCEs and controlled green-light illumination, the actuator senses the optical properties of the object, establishing an actuation plan through spatial radical generation. Subsequent far-red irradiation triggers different actuation modes, enabling selective object sorting. This pattern-encoded actuation allows objects with different optical characteristics to trigger specific mechanical responses under identical illumination conditions. This single-material system, which is optically resettable, integrates sensory feedback, deliberative decision-making, and adaptive mechanical responses. Surpassing the reactive nature of conventional self-regulated LCE systems, our approach advances LCE-based robotics toward greater autonomy, aligning with the sense-plan-act paradigm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoparticle-assisted targeting of heart lesions with cardiac myofibroblasts: Combined gene and cell therapy

  • Schiffer, Miriam
  • Wagner, Kevin
  • Carls, Esther
  • Nicke, Julia
  • Hesse, Michael
  • Fratila, Raluca M.
  • Hildebrand, Staffan
  • Eberbeck, Dietmar
  • Mohr, Timo
  • Mohammadi, Mona Malek
  • de la Fuente, Jesus Martinez
  • Fleischmann, Bernd K.
  • Roell, Wilhelm
Rationale: The cardiac scar is an area rich in collagen. It is populated by myofibroblasts and lacks Connexin 43 expressing cardiomyocytes. Myocardial infarctions have so far proven little amenable to gene- and cell-based therapeutic interventions. Our aim was to establish an experimental approach with translational potential for effective cell-based gene therapy of the cardiac scar. Methods: We have developed a targeting strategy for myocardial infarctions by grafting ex vivo lentivirus-transduced and magnetic nanoparticle-loaded embryonic cardiac myofibroblasts into mouse hearts with magnetic steering. Results: Our approach yielded highly efficient targeting and cell grafting into the cardiac scar. Engraftment rates of myofibroblasts proved very high (30% of injected cells) due to cell proliferation and a low apoptosis rate. We also demonstrate that grafting lentivirus-transduced Connexin 43 overexpressing myofibroblasts into the lesion resulted in increased Connexin 43 protein content and strong protection against ventricular arrhythmias in vivo, as their incidence was reduced by ~ 50% at 2- and 8 weeks after myocardial infarction. Conclusion: The combination of ex vivo gene and in vivo cell therapy, along with magnetic steering of cardiac myofibroblasts, enables, efficient targeting of the cardiac scar and can even modulate its functional properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Holographic Whole‐Object Photopolymerization Preserving Director Alignment in Liquid Crystalline Actuators

  • Gulati, Lovish
  • Lee, Junhee
  • Norouzikudiani, Reza
  • Li, Jianfeng
  • Sánchez Somolinos, Carlos
  • DeSimone, Antonio
  • Melde, Kai
  • Song, Alexander
  • Fischer, Peer
Liquid crystalline (LC) crosslinked polymeric structures are promising for soft robotic applications, as their actuation profile is intrinsically encoded and results from the structure's shape and the LC molecular orientation (director). However, it remains challenging to fabricate 3D objects and at the same time control the director orientation within the 3D structure. Liquid crystalline molecules are commonly aligned using modified surfaces or electric/magnetic fields. However, additive manufacturing methods may locally distort the director, when fabricating 3D objects. Here, holographic microlithography is employed to form entire connected 3D objects in a single exposure by cross‐linking the LC, while allowing the director orientation within the object to be freely controlled. This enables us to independently choose a global director orientation and then realize complex 3D geometries in a single fabrication step. This approach avoids the director distortion present in sequential 3D printing and lithography methods, and allows for complex actuation profiles that are directly linked to the 3D director orientation. The method presented herein permits the rapid fabrication of complex 3D connected LC structures while preserving the molecular order, and thereby enables the fabrication of more complex 3D soft actuators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

4D Printable Formulations of Mixed Low and High Molecular Weight Liquid Crystalline Units: A Versatile Route to Functional Soft Actuators

  • Ceamanos, Lorena
  • López-Valdeolivas, María
  • Lyu, Pengrong
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
Over the last few years, 4D printing of liquid crystal elastomers (LCEs) has been explored to develop actuators with significant, reversible, and anisotropic shape changes upon external stimuli such as heat or light. Most reported ink formulations rely on photo-curable liquid crystal materials derived from high molecular weight (MW) main-chain macromers. Their rheological properties allow to program molecular alignment during direct ink writing. In contrast, formulations composed mainly of monoacrylate or diacrylate low MW mesogens are unsuitable for extrusion-based 4D printing as they fail to promote mesogen alignment during printing. This shortcoming restricts the range of chemical and physical compositions accessible to 4D printing. Here, we introduce a practical route for formulating 4D printable inks that integrate low MW mesogens. By adding an acrylate-ended macromer to the low MW constituents, these mixtures become suitable for direct ink writing. This enables the preparation of multi-functional actuators with digitally controlled director morphology and tailored properties, for example, stiffness and actuation strain, as well as light-responsive behavior when photoactive molecules are used. These results highlight the versatility of the method and suggest its potential compatibility with other functional low MW units, such as those responsive to electrical or pH stimuli.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Delayed crosslinking enables ultra-high-resolution melt electrowriting of responsive liquid crystal elastomers

  • Javadzadeh, Mehrzad
  • Fernández-Melero, María
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
Melt electrowriting (MEW) enables the fabrication of finely structured scaffolds with sub-micrometer resolution. However, reducing the inter-fiber distance (IFD) in MEW remains challenging due to electrostatic interactions between the charged polymer jet and previously deposited fibers, often leading to fiber bridging. Recently, we demonstrated that MEW of reactive liquid crystalline inks, followed by ultraviolet (UV) photopolymerization, enables the fabrication of digitally positioned liquid crystal elastomer (LCE) structures. Building on this, we demonstrate that tuning the UV light intensity during photopolymerization significantly improves the achievable resolution range. Lower UV intensities produce smaller minimum IFDs without fiber bridging, enabling the fabrication of highly ordered structures with IFDs down to 11 µm for 5 µm-diameter fibers, a feature that, to the best of our knowledge, surpasses the smallest IFDs previously reported for MEW. We hypothesize that slower crosslinking kinetics extend the time window for charge dissipation, reducing electrostatic interactions between the jet and the previously deposited fibers. Although the mechanism remains unclear, local variations in material flow or curing-induced surface morphology may also affect electric field distribution. Beyond resolution improvements, this strategy enables defect-free fabrication of stimuli-responsive LCEs with programmable shape transformation and actuation. UV light intensity thus emerges as a critical design parameter for MEW, with implications for other photo-crosslinkable systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled release of glucocorticoid via PLGA nanoparticles for modulating macrophage polarization in inflammation situations

  • Esteban-Pérez, Natalia
  • Del Sol-Fernández, Susel
  • Martín-Rapún, Rafael
  • Martínez de la Fuente, Jesús
Glucocorticoids are among the most widely used anti-inflammatory and immunosuppressive drugs. However, their prolonged administration is associated with a wide range of adverse side effects including long-lasting immunosuppression. In this study, we aimed to encapsulate two commonly used glucocorticoids with different potency and duration, hydrocortisone and dexamethasone, into poly(lactic-co-glycolic acid) (PLGA) nanoparticles with the goal to modulate inflammatory gene expression in a delivery-dependent manner. We evaluated their anti-inflammatory properties in two in vitro models varying the timing of treatment administration based on lipopolysaccharide M1-polarized macrophages, key effectors of the innate immune system. Our results demonstrated that, for both strategies, drug-loaded nanoparticles significantly reduced the expression of interleukin-6, a pro-inflammatory cytokine, compared to the free drugs. However, in one of the strategies, while free drugs induced upregulation of interleukin-10, a key anti-inflammatory cytokine, no such effect was observed with the nanoparticle-based formulations. Overall, these results demonstrate that PLGA nanoparticles enable sustained glucocorticoid delivery and modulate inflammatory gene expression in activated macrophages in a delivery- and timing-dependent manner, providing comparative insight into how glucocorticoid delivery via PLGA nanoparticles shapes inflammatory gene regulation depending on treatment timing and highlighting the importance of in vitro model design.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Programming of Complex Magnetic Profiles Enforced by 4D Printed Magnetic LCE Actuators

  • Espíndola-Pérez, Erick R.
  • Goyal, Rahul
  • Gulati, Lovish
  • López-Valdeolivas, María
  • Fischer, Peer
  • Sánchez-Somolinos, Carlos
Magnetic soft actuators enable untethered, contact‐free actuation yet they are fundamentally limited by the difficulty of programming complex, three‐dimensional (3D), spatially non‐uniform magnetic profiles. Here, we introduce a four‐dimensional (4D) printing‐enabled magnetic programming strategy that overcomes this challenge by magnetizing magnetically active liquid crystal elastomers (MLCEs) in thermally actuated target states. Digitally prescribed director architectures define deterministic 3D deformations at elevated temperature, which serve as intrinsic programming templates during magnetization under a spatially uniform magnetic field. Upon cooling, relaxation of the thermomechanical deformation transforms the initially uniform magnetization into a complex, spatially varying magnetic profile that encodes the target shape as a magnetically favoured configuration. This approach enables the recovery of thermally defined shapes at room temperature under low magnetic fields and allows bidirectional and multistate actuation via simple reversal of field direction. By integrating spatial magnetic programming with controlled geometric asymmetry, we demonstrate frequency‐tunable linear locomotion and chirality‐encoded clockwise or anticlockwise rotational motion in multimaterial soft robotic architectures. This strategy decouples magnetic profile complexity from magnetization hardware, providing a scalable, template‐free route to fully 3D magnetic programming for soft robotics and untethered actuators operating under low‐field conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Temperature-driven elastocaloric enhancement in amorphous elastomers with liquid-crystal mesogens

  • Rojo, Kenneth Roy
  • Cosculluela, Carlos
  • Téllez, Pedro
  • Sánchez-Somolinos, Carlos
  • Evangelisti, Marco
We report variable-temperature, direct elastocaloric measurements on an amorphous elastomer with liquid-crystal mesogens exhibiting mechanotropic ordering. Using a custom tensile setup coupled with infrared thermography, we enable rapid mechanical cycling across a broad temperature range. As temperature decreases from ambient conditions, the elastocaloric response increases markedly, reaching a maximum near −3.5 °C with adiabatic temperature changes of ΔT+ = 3.9 °C and ΔT− = −4.3 °C at 60% strain. By correlating these measurements with polymer-dynamics analysis, we identify a finite temperature window in which the elastocaloric response is maximized. This optimum reflects kinetic matching between molecular relaxation dynamics and the timescale of the mechanical loading–unloading cycle.