Pasar al contenido principal

POMLIMEROS: APROXIMACIONES INNOVADORAS A ANTIMICROBIANOS DE AMPLIO ESPECTRO

PID2019-109333RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antifungal Activity of Polyoxometalate-Ionic Liquids on Historical Brick

  • Rajkowska, Katarzyna
  • Koziróg, Anna
  • Otlewska, Anna
  • Piotrowska, Małgorzata
  • Atrián-Blasco, Elena
  • Franco-Castillo, Isabel
  • Mitchell, Scott G.
© 2020 by the authors., Moulds inhabiting mineral-based materials may cause their biodeterioration, contributing to inestimable losses, especially in the case of cultural heritage objects and architectures. Fungi in mouldy buildings may also pose a threat to human health and constitute the main etiological factor in building related illnesses. In this context, research into novel compounds with antifungal activity is of high importance. The aim of this study was to evaluate the antifungal activity of polyoxometalate-ionic liquids (POM-ILs) and their use in the eradication of moulds from historical brick. In the disc diffusion assay, all the tested POM-ILs inhibited growth of a mixed culture of moulds including Engyodontium album, Cladosporium cladosporioides, Alternaria alternata and Aspergillus fumigatus. These were isolated from the surfaces of historical brick barracks at the Auschwitz II-Birkenau State Museum in Oświęcim, Poland. POM-IL coatings on historical brick samples, under model conditions, showed that two compounds demonstrated very high antifungal activity, completely limiting mould growth and development. The antifungal activity of the POM-ILs appeared to stem from their toxic effects on conidia, as evidenced by environmental scanning transmission electron microscopy observations. The results herein indicated that POM-ILs are promising disinfectant materials for use not only on historical objects, but probably also on other mineral-based materials., E.A.-B. and S.G.M. acknowledge the European Union’s Horizon 2020 research and innovation program for the Marie Skłodowska-Curie grant agreement No 845427. S.G.M acknowledges funding from Ministerio de Ciencia e Innovación (Spain) (PID2019-109333RB-I00). I.F.-C. is supported by a Gobierno de Aragón doctoral fellowship, http://creativecommons.org/licenses/by/4.0/
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imidazole and imidazolium antibacterial drugs derived from amino acids

  • Valls, Adriana
  • Andreu, Jose J.
  • Falomir, Eva
  • Luis, Santiago V.
  • Atrián-Blasco, Elena
  • Mitchell, Scott G.
  • Altava, Belén
This article belongs to the Special Issue Novel Antibacterial Agents., The antibacterial activity of imidazole and imidazolium salts is highly dependent upon their lipophilicity, which can be tuned through the introduction of different hydrophobic substituents on the nitrogen atoms of the imidazole or imidazolium ring of the molecule. Taking this into consideration, we have synthesized and characterized a series of imidazole and imidazolium salts derived from L-valine and L-phenylalanine containing different hydrophobic groups and tested their antibacterial activity against two model bacterial strains, Gram-negative E. coli and Gram-positive B. subtilis. Importantly, the results demonstrate that the minimum bactericidal concentration (MBC) of these derivatives can be tuned to fall close to the cytotoxicity values in eukaryotic cell lines. The MBC value of one of these compounds toward B. subtilis was found to be lower than the IC50 cytotoxicity value for the control cell line, HEK-293. Furthermore, the aggregation behavior of these compounds has been studied in pure water, in cell culture media, and in mixtures thereof, in order to determine if the compounds formed self-assembled aggregates at their bioactive concentrations with the aim of determining whether the monomeric species were in fact responsible for the observed antibacterial activity. Overall, these results indicate that imidazole and imidazolium compounds derived from L-valine and L-phenylalanine—with different alkyl lengths in the amide substitution—can serve as potent antibacterial agents with low cytotoxicity to human cell lines., E.A.B. and S.G.M acknowledge funding from the Ministerio de Ciencia e Innovación (Spain) (PID2019-109333RB-I00) and the European Union’s Horizon 2020 research and innovation program (Marie Skłodowska-Curie grant agreement No 845427). S.V.L and B.A. acknowledge funding from Ministerio de Ciencia e Innovación, RTI2018-098233-B-C22 and Pla de Promoció de la Investigació de la Universitat Jaume I, UJI-B2019-40. A.V. was funded by Ministerio de Ciencia e Innovación within the predoctoral fellowship program, grant FPU15/01191., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perspectives for antimicrobial nanomaterials in cultural heritage conservation

  • Franco-Castillo, Isabel
  • Hierro, Lara
  • Fuente, Jesús M. de la
  • Seral-Ascaso, Andrés
  • Mitchell, Scott G.
The biodeterioration of artistic and architectural heritage represents a serious and recurring problem for museums, local authorities, and private collectors alike, where irreparable damage to unique artifacts can result in immeasurable losses to our shared cultural heritage. Here, we present an overview of the current trends in antimicrobial products used to protect heritage items from microbial colonization and prevent their deterioration. From a conservation-restoration standpoint, we contrast and compare traditional antimicrobial products with the state of the art in antimicrobial nanomaterials applied in the heritage conservation field, highlighting the promising potential of various different nanomaterials, as well as points of concern and clear red flags from some of the emerging research. Through an examination of the growing body of research in the academic literature we offer recommendations and practical advice on selecting appropriate microbiological assays and characterization techniques to better evaluate the in vitro and in situ antimicrobial properties of nanomaterials., ASA "This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 840375". SGM acknowledges financial support from Ministerio de Ciencia Innovación y Universidades (Spain) for Proyecto I+D+i PID2019-109333RB-I00, and professional support from the CSIC Interdisciplinary Thematic Platform Open Heritage: Research and Society (PTI-PAIS). IFC acknowledges the Gobierno de Aragón for a doctoral scholarship (2018-2022). LH acknowledges the Consejo Superior de Investigaciones Científicas (CSIC) for a JAE Intro fellowship (JAEINT19_EX_0430)., Marie Sklodowska-Curie grant agreement No 840375: "2D Materials/Polyoxometalate Hybrids for Heritage Conservation HeriCare", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-POM ring-opening polymerisation of N-carboxyanhydrides

  • Soria-Carrera, Héctor
  • Franco-Castillo, Isabel
  • Romero, Pilar
  • Martín, Santiago
  • Fuente, Jesús M. de la
  • Mitchell, Scott G.
  • Martín-Rapún, Rafael
The ring-opening polymerisation of α-amino acid N-carboxyanhydrides (NCAs) offers a simple and scalable route to polypeptides with predicted and narrow molecular weight distributions. Here we show how polyoxometalates (POMs)—redox-active molecular metal-oxide anions—can serve as inorganic scaffold initiators for such NCA polymerisations. This “On-POM polymerisation” strategy serves as an innovative platform to design hybrid materials with additive or synergistic properties stemming from the inorganic and polypeptide component parts. We have used this synthetic approach to synthesise a library of bactericidal poly(lysine)–POM hybrid derivatives that can be used to prevent biofilm formation. This versatile “On-POM polymerisation” method provides a flexible synthetic approach for combining inorganic scaffolds with amino acids, and the potential to tailor and improve the specificity and performance of hybrid antimicrobial materials., Financial support from Ministerio de Ciencia Innovación y Universidades (Spain) through a Ramón y Cajal fellowship (RMR, RYC-2013-12570) and Proyectos I+D+i (PID2019-109333RB-I00, PGC2018-097583-B-I00, and PID2019-105881RB-I00) and CSIC i-Link+2019 project (LINK20270). HSC and IFC are grateful for predoctoral fellowships from Ministerio de Educación Cultura y Deporte (FPU program) and Gobierno de Aragón, respectively. Further financial support from Fondo Social Europeo-Gobierno de Aragón (E15_20R, E47_20R and E31_17R) and CIBER-BBN is gratefully acknowledged. The authors would like to acknowledge the Laboratorio de Microscopías Avanzadas (LMA) at Universidad de Zaragoza for offering access to their instruments and expertise, especially Guillermo Antorrena for the XPS measurements; the use of the Unidad de Apoyo a la Investigación del CEQMA (CSIC-Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decoupling manufacturing from application in additive manufactured antimicrobial materials

  • Wales, Dominic J.
  • Miralles-Comins, Sara
  • Franco-Castillo, Isabel
  • Cameron, Jamie M.
  • Cao, Qun
  • Karjalainen, Erno
  • Alves Fernandes, Jesum
  • Newton, Graham N.
  • Mitchell, Scott G.
  • Sans, Victor
3D printable materials based on polymeric ionic liquids (PILs) capable of controlling the synthesis and stabilisation of silver nanoparticles (AgNPs) and their synergistic antimicrobial activity are reported. The interaction of the ionic liquid moieties with the silver precursor enabled the controlled in situ formation and stabilisation of AgNPs via extended UV photoreduction after the printing process, thus demonstrating an effective decoupling of the device manufacturing from the on-demand generation of nanomaterials, which avoids the potential aging of the nanomaterials through oxidation. The printed devices showed a multi-functional and tuneable microbicidal activity against Gram positive (B. subtilis) and Gram negative (E. coli) bacteria and against the mould Aspergillus niger. While the polymeric material alone was found to be bacteriostatic, the AgNPs conferred bactericidal properties to the material. Combining PIL-based materials with functionalities, such as in situ and photoactivated on-demand fabricated antimicrobial AgNPs, provides a synergistic functionality that could be harnessed for a variety of applications, especially when coupled to the freedom of design inherent to additive manufacturing techniques., Generalitat Valenciana (CIDEGENT/2018/036), UJI (UJI-B2020-44) and the Agencia Valenciana of Innovacion (INNCON/2020/14) are gratefully acknowledged for funding that partially funded this work. SMC thanks the Generalitat Valenciana for a doctoral scholarship funding (ACIF/2020/338). Financial support from Ministerio de Ciencia Innovación y Universidades (Spain) through Proyecto I+D+i PID2019-109333RB-I00. We thank the Beacons of Excellence: Propulsion Futures and Green Chemicals of the University of Nottingham for financial support; the Nanoscale and Microscale Research Centre – UoN. J. M. C., V. S., and G. N. N. thank the Leverhulme Trust (RPG-2016-442). IFC thanks Gobierno de Aragón for a doctoral scholarship. Further financial support from Fondo Social Europeo-Gobierno de Aragón (E15_20R) and CIBER-BBN is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Polyoxometalate-polypeptide assemblies as peroxidase surrogates

  • Soria-Carrera, Héctor
  • Atrián-Blasco, Elena
  • Fuente, Jesús M. de la
  • Mitchell, Scott G.
  • Martín-Rapún, Rafael
Resumen del póster presentado al EMBO Workshop Designing functional biomolecular assemblies: Beyond biology, celebrado online del 28 de septiembre al 1 de octubre de 2021., Developing artificial metalloenzymes that possess superior performance or properties than their natural counterparts is an attractive concept. Taking the simplest building blocks of naturally occurring enzymes, peptides and metal ions, scientists have developed systems that can compete with evolved proteins like peroxidases. Polyoxometalates (POMs) represent a class of anionic molecular metal-oxides with excellent redox properties. Recently, Wang’s group explored the peroxidase activity of different POMs, finding that some POMs displayed activity at basic pH. We have recently introduced a new type of hybrid material called “POMlymers”, which are covalently conjugated POM-peptide hybrids obtained through a ring-opening polymerization (ROP) reaction initiated by an amino group on the POM molecule. This is the first example of ROP of N-carboxyanhydrides (NCAs) using a molecular metal-oxide as initiator and inorganic molecular scaffold. POMlymer coatings showed antibacterial and antibiofilm activity. Attracted by the idea of preparing artificial metalloenzymes, we explored the self-assembly of these POMlymer hybrids in solution to identify a suitable environment for catalysis. In this communication, we present the preparation of supramolecular nanoscale assemblies based on a POMlymer with amphiphilic random copolypeptides that display peroxidase-like activity. We demonstrated that the covalent hybrid enhances the catalytic properties, compared to the free POM anion; whereas the ionic assembly has a detrimental effect on the catalysis. We also found that the catalytic activity of the covalent hybrid was enhanced in the assembled state. Finally, we evaluated the antimicrobial activity of POMK10 aggregates against Staphylococcus epidermidis and measured the bacteria response to this redoxactive hybrid material by measuring the production of biofilm and endogenous radical oxygen species (ROS). With this study we aimed at answering whether the POM-peptide covalent linkage could be advantageous to prepare hybrid materials that preserve the redox-active center. We used peroxidase activity and microbiology to address such a question., We acknowledge Ministerio de Educación Cultura y Deporte (FPU predoctoral fellowship), Ministerio de Ciencia e Innovación (PID2019-109333RB-I00), and European Union’s Horizon 2020 research and innovation program (Marie Skłodowska-Curie grant agreement No 845427)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing ethyl lauroyl arginate antimicrobial films to combat Listeria monocytogenes in cured ham

  • Gracia-Vallés, Nicolás
  • Ruiz-Torrubia, Fernando
  • Mitchell, Scott G.
  • Nerín, Cristina
  • Silva, Filomena
Widespread use of plastics poses a serious environmental hazard to our planet and should be substituted by eco-friendly and biodegradable alternatives, simultaneously reducing waste of perishable food products and the risk of transmission of pathogenic microbes. In our study, we describe how the water solubility of the antimicrobial surfactant ethyl lauroyl arginate (LAE) can be reduced through complexation with a Keggin-type polyoxometalate (POM), K8[SiW11O39]. The POM-LAE complex, LAE7K[SiW11O39], was effective against Listeria monocytogenes (L. monocytogenes) and Escherichia coli (E. coli) with minimal inhibitory concentrations (MICs) of 32 and 64 μg/mL, respectively, with the important finding that the concentrations of LAE required to inhibit bacterial growth were as much as two times lower in the POM-LAE complex, compared with LAE on its own. In addition, our results demonstrate that POM-LAE is both an effective inhibitor of biofilm formation and is also able to destroy pre-formed biofilms of L. monocytogenes and E. coli at MIC concentrations. Further, POM-LAE was incorporated into carboxymethyl cellulose (CMC) films that were able to reduce 7–8 log (CFU/mL) of L. monocytogenes at concentrations of 5–10% POM-LAE. In vivo assays of the POM-LAE-CMC films with cured ham prevented initialk bacterial growth with a 0.77 log significative reduction in bacterial counts. Overall, this work provides new alternatives for the development of antimicrobial biodegradable films for ready-to-eat (RTE) foods prone to contamination with pathogenic bacteria, such as L. monocytogenes, while also circumventing practical issues related to the incorporation of LAE into active packaging films., This work was supported by the Spanish Ministerio de Ciencia e Innovación (RTI2018-097805-B-I00 and PID2019-109333RB-I00), the Gobierno de Aragón (Project LMP49-18) and the Centre for the Development of Industrial Technology (1061/2020). N.G. acknowledges a fellowship from the Universidad de Zaragoza and Université de Pau et des Pays de l’Adour., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid antimicrobial films containing a polyoxometalate-ionic liquid

  • Enderle, Ana G.
  • Franco-Castillo, Isabel
  • Atrián-Blasco, Elena
  • Martín-Rapún, Rafael
  • Lizarraga, Leonardo
  • Culzoni, María J.
  • Bollini, Mariela
  • Fuente, Jesús M. de la
  • Silva, Filomena
  • Streb, Carsten
  • Mitchell, Scott G.
The increasing resistance of pathogenic microorganisms against common treatments requires innovative concepts to prevent infection and avoid long-term microbe viability on commonly used surfaces. Here, we report the preparation of a hybrid antimicrobial material based on the combination of microbiocidal polyoxometalate-ionic liquids (POM-ILs) and a biocompatible polymeric support, which enables the development of surface coatings that prevent microbial adhesion. The composite material is based on an antibacterial and antifungal room-temperature POM-IL composed of guanidinium cations (N,N,N′,N′-tetramethyl-N″, N″-dioctylguanidinum) combined with lacunary Keggin-type polyoxotungstate anions, [α-SiW11O39]8–. Integration of the antimicrobial POM-IL into the biocompatible, flexible, and stable polymer poly(methyl methacrylate) (PMMA) results in processable films, which are suitable as surface coatings or packaging materials to limit the proliferation and spread of pathogenic microorganisms (e.g., on public transport and hospital surfaces, or in ready-to-eat-food packaging)., This research was supported by Deutscher Akademischer Austauschdienst DAAD (A.G.E.); Ministerio de Ciencia Innovación y Universidades (Spain) Proyectos I + D + I, PID2019-109333RB-I00 (S.G.M & R.M.-R.); CSIC i-Link + 2019 project LINK20270 (S.G.M & R.M.-R.); European Union’s Horizon 2020 research and innovation program (Marie Skłodowska-Curie grant agreement no. 845427) (E.A.B. and S.G.M); Programa Operativo Aragón de Fondo Social Europeo 2014–2020 (I.F.C.); Agencia Nacional de Promoción Científica y Tecnológica, Argentina (National Agency for Scientific and Technological Promotion, ANPCYT): PICT 2017-3767 (M.B.) and PICT 2017-0340 (M.J.C); the Consejo Nacional de Investigaciones Científicas y Técnicas (National Scientific and Technical Research Council); and the Universidad Nacional del Litoral, CAI + D 50620190100020LI (M.J.C) and Gobierno de Aragón (Project LMP49-18)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New protective coatings against lampenflora growing in the Pommery Champagne cellar

  • Franco-Castillo, Isabel
  • Misra, Archismita
  • Laratte, Sébastien
  • Gommeaux, Maxime
  • Perarnau, Robin
  • Vaillant-Gaveau, Nathalie
  • Pierlot, Clément
  • Streb, Carsten
  • Mitchell, Scott G.
Phototrophic microorganisms such as cyanobacteria and microalgae can proliferate readily in underground heritage sites where the introduction of artificial illumination equipment has significantly altered previously stable environmental conditions. The extended lampenflora biofilm growth on the bas-reliefs carved in the underground Pommery Champagne cellar in Reims (France) represents a recurring biocolonisation problem which requires periodic cleaning. The aim of this work was to limit the growth of lampenflora on chalk substrates using preventative biocidal treatments based on polyoxometalate ionic liquids (POM-ILs). Biocidal assays carried out in laboratory showed how two different colourless POM-IL coatings were more effective than commercial Preventol RI80 against two algal strains isolated from the Pommery bas reliefs, Pseudostichococcus monallantoides and Chromochloris zofingiensis. However, only one POM-IL variant was capable of sustained prevention of biofilm growth when applied to wet chalk, which replicates the more drastic natural environmental conditions of the cellar and can limit the performance of the biocidal coatings. Crucially, coating concentration studies demonstrate how POM-IL-coated slabs from previous experiments retain their biocidal activity and can prevent subsequent recolonisation following the re-inoculation of coated slabs with algae and cyanobacteria. Consequently, POM-ILs represent excellent candidates to eliminate lampenflora growth on the chalk bas-reliefs in the unique subterranean environment of the Pommery Champagne cellar., This research was supported by the Ministerio de Ciencia, Innovación y Universidades (Spain) Proyecto I + D + i, PID 2019-109333RB-I00 (S.G.M), Gobierno de Aragón and Programa Operativo Aragón de Fondo Social Europeo 2014–2020 (I.F.C.) and Vranken-Pommery Monopole. The authors acknowledge Rachel Ouvinha De Oliveira and Clément Pierlot of Pommery Champagne cellar for access and support. S.G.M. and S.E.C. would like to acknowledge the University of Reims Champagne-Ardennes for visiting professorships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalate-polypeptide nanoassemblies as peroxidase surrogates with antibiofilm properties

  • Soria-Carrera, Héctor
  • Atrián-Blasco, Elena
  • Fuente, Jesús M. de la
  • Mitchell, Scott G.
  • Martín-Rapún, Rafael
Developing artificial metalloenzymes that possess a superior performance to their natural counterparts is an attractive concept. Polyoxometalates (POMs) are a class of anionic molecular metal–oxides with excellent redox properties and bioactivity. We have recently introduced “POMlymers” – covalently conjugated POM–peptide hybrid materials – where the polypeptide chain is obtained through a ring-opening polymerisation (ROP) of α-amino acid N-carboxyanhydrides (NCA) on an inorganic POM scaffold. Attracted by the idea of preparing artificial metalloenzymes, here we report the supramolecular self-assembly of POMlymer hybrids into nanoparticles where an optimal environment for catalysis is created. Our results demonstrate that the self-assembly of covalent POMlymers, enhances the peroxidase-like activity of the parent POM anion whereas, in contrast, the catalytic activity for nanoparticles obtained by ionic self-assembly of the same peptide and POM components practically disappears. Furthermore, POMlymer nanoparticles also present antimicrobial and antibiofilm activity against the skin bacterium Staphylococcus epidermidis; whereas, ionic POM–peptide hybrids significantly increase biofilm production and endogenous production of reactive oxygen species. In summary, we present the self-assembly of POMlymer hybrids into nanoparticles and a combination of peroxidase activity and microbiology assays that show that the POM–peptide covalent bond is essential for the stability of the self-assembled nanoparticles and therefore for their catalytic and biological activity., This work was funded through the grant PID2019-109333RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain), through project LINKA20270 i-Link+ 2019 funded by CSIC and through Fondo Social de la DGA (grupo DGA E15_20R). HSC is grateful for a predoctoral fellowship FPU2016/02456 funded by Ministerio de Universidades (Spain). E. A. B. and S. G. M. acknowledge funding from the European Union's Horizon 2020 research and innovation program (Marie Skłodowska-Curie grant agreement no. 845427)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalate-peptide hybrid materials: from structure-property relationships to applications

  • Soria-Carrera, Héctor
  • Atrián-Blasco, Elena
  • Martín-Rapún, Rafael
  • Mitchell, Scott G.
This article is part of the themed collections: 2023 ChemSci Pick of the Week Collection, 2023 Chemical Science HOT Article Collection and 2023 Chemical Science Perspective & Review Collection., Organo-functionalisation of polyoxometalates (POMs) represents an effective approach to obtain diverse arrays of functional structures and materials, where the introduction of organic moieties into the POM molecules can dramatically change their surface chemistry, charge, polarity, and redox properties. The synergistic combination of POMs and peptides, which perform a myriad of essential roles within cellular biochemistry, including protection and transport in living organisms, leads to functional hybrid materials with unique properties. In this Perspective article, we present the principal synthetic routes to prepare and characterise POM–peptide hybrids, together with a comprehensive description of how their properties – such as redox chemistry, stereochemistry and supramolecular self-assembly – give rise to materials with relevant catalytic, adhesive, and biomedical applications. By presenting the state-of-the-art of the POM–peptide field, we show specifically how emerging chemical approaches can be harnessed to develop tailored POM–peptide materials with synergistic properties for applications in a variety of disciplines., This work was funded through the grant PID2019-109333RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain); through project LINKA20270 i-Link+ 2019 funded by CSIC and through Fondo Social de la DGA (grupo DGA E15_20R). HSC is grateful for a predoctoral fellowship FPU2016/02456 funded by Ministerio de Universidades (Spain). E. A. B. and S. G. M. acknowledge funding from the European Union's Horizon 2020 research and innovation program (Marie Skłodowska-Curie grant agreement no. 845427) and the fellowship funded by CSIC through the internationalisation program IF_ERC 2020. Figures were created with https://BioRender.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning of mechanical properties in photopolymerizable gelatin-based hydrogels for in vitro cell culture systems

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco’s modified Eagle’s medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds., This work was funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” through grants PID2020-118485RB-I00, PID2019-109333RB-I00, and PGC2018-097583-B-I00; Gobierno de Aragón through grant LMP221_21; and “Fondo Social Europeo” (E15_20R and E47_20R). RPC acknowledges Gobierno de Aragón for a predoctoral fellowship (2017–2021). S.G.-L. was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Subcellular localization and therapeutic efficacy of polymeric micellar nanoparticles encapsulating bedaquiline for tuberculosis treatment in zebrafish

  • Bhandari, Madhavi
  • Soria-Carrera, Héctor
  • Wohlmann, Jens
  • Knudsen Dal, Nils-Jørgen
  • Fuente, Jesús M. de la
  • Martín-Rapún, Rafael
  • Griffiths,Gareth
  • Fenaroli, Federico
The combination drug regimens that have long been used to treat tuberculosis (TB), caused by Mycobacterium tuberculosis, are fraught with problems such as frequent administration, long duration of treatment, and harsh adverse effects, leading to the emergence of multidrug resistance. Moreover, there is no effective preventive vaccine against TB infection. In this context, nanoparticles (NPs) have emerged as a potential alternative method for drug delivery. Encapsulating antibiotics in biodegradable NPs has been shown to provide effective therapy and reduced toxicity against M. tuberculosis in different mammalian models, when compared to conventional free drug administration. Here, we evaluate the localization, therapeutic efficacy and toxic effects of polymeric micellar NPs encapsulating a promising but highly hydrophobic and toxic antitubercular drug bedaquiline (BQ) in zebrafish embryos infected with Mycobacterium marinum. Our study shows that the NP formulation of BQ improves survival and reduces bacterial burden in the infected embryos after treatment when compared to its free form. The intravenously injected BQ NPs have short circulation times due to their rapid and efficient uptake into the endothelial cells, as observed by correlative light and electron microscopy (CLEM)., This work was supported by the Norwegian Research Council grants – Frimedbio (275873) and Bedrehelse (273319). In addition, this work was funded through the grant PID2019–109333RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain), through project LINKA20270 i-Link+ 2019 funded by CSIC and through Fondo Social de la DGA (grupo DGA E15_20R). HSC is grateful for a predoctoral fellowship FPU2016/02456 funded by Ministerio de Universidades (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the durability and performance of polyoxometalate-ionic liquid coatings on calcareous stones: Preventing biocolonisation in outdoor environments

  • Eyssautier-Chuine, Stéphanie
  • Franco-Castillo, Isabel
  • Misra, Archismita
  • Huber, Christof
  • Vaillant-Gaveau, Nathalie
  • Streb, Carsten
  • Mitchell, Scott G.
Rock-based materials exposed to outdoor environments are naturally colonised by an array of microorganisms, which can cause dissolution and fracturing of the natural stone. Biocolonisation of monuments and architectures of important cultural heritage therefore represents an expensive and recurring problem for local authorities and private owners alike. In this area, preventive strategies to mitigate biocolonisation are generally preferred to curative approaches, such as mechanical cleaning by brush or high-pressure cleaning, to remove pre-existing patina. The aim of this work was to study the interaction between biocidal polyoxometalate-ionic liquid (POM-IL) coatings and calcareous stones and evaluate the capacity of these coatings to prevent biocolonisation through a series of accelerated ageing studies in climate chambers, carried out in parallel with a two-year period of outdoor exposure in north-eastern France. Our experiments show that POM-IL coatings did not affect water vapour transfer nor significantly alter the total porosity of the calcareous stones. Simulated weathering studies replicating harsh (hot and wet) climatic weather conditions demonstrated that the colour variation of POM-IL-coated stones did not vary significantly with respect to the natural uncoated stones. Accelerated biocolonisation studies performed on the weathered POM-IL-coated stones proved that the coatings were still capable of preventing colonisation by an algal biofilm. However, a combination of colour measurements, chlorophyll fluorescence data, and scanning electron microscopy imaging of stones aged outdoors in northern France for two years showed that coated and uncoated stone samples showed signs of colonisation by fungal mycelium and phototrophs. Altogether, our results demonstrate that POM-ILs are suitable as preventative biocidal coatings for calcareous stones, but the correct concentrations must be chosen to achieve a balance between porosity of the stone, the resulting colour variation and the desired duration of the biocidal effect over longer periods of time, particularly in outdoor environments., This work was funded through the grant PID2019-109333RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragón. The authors also acknowledge the Fondo Social del Gobierno de Aragón (grupo DGA E15_20R) and the Programa Operativo Aragón de Fondo Social Europeo 2014-2020 (I.F.C.). The authors acknowledge the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza), for the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. The authors wish to acknowledge professional support of the Interdisciplinary Thematic Platform from CSIC Open Heritage: Research and Society (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The mechanical and biological performance of photopolymerized gelatin-based hydrogels as a function of the reaction media

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization has evolved extensively. Several properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, the influence of the reaction media (RM) and swelling media (SM)-phosphate buffered saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations-is described in gelatin methacrylamide (GelMA) hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco-2 and HCT-116). All scaffolds are UV-photocrosslinked under identical conditions and evaluated for mass swelling ratio and stiffness. The results indicate that stiffness is highly susceptible to the RM, but not to the SM. Additionally, PBS-prepared hydrogels exhibited a higher photopolymerization degree according to high resolution magic-angle spinning (HR-MAS) NMR. These findings correlate with the biological response of Caco-2 and HCT-116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation are excellent for both cell lines, and Caco-2 cells displayed a characteristic apical-basal polarization based on F-actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture., This work was funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” through grants PID2020-118485RB-I00, PID2019-109333RB-I00 and PID2021-126132NB-100, Gobierno de Aragón and “ERDF A way of making Europe” though grant LMP221_21; through the “Fondo Social Europeo” (DGA E15_20R). This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. RPC acknowledges Gobierno de Aragón for a predoctoral fellowship (2017-2021). SGL was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Imidazole and imidazolium antibacterial drugs derived from amino acids

  • Valls, A.
  • Andreu, J.J.
  • Falomir, E.
  • Luis, S.V.
  • Atrián-Blasco, E.
  • Mitchell, S.G.
  • Altava, B.
The antibacterial activity of imidazole and imidazolium salts is highly dependent upon their lipophilicity, which can be tuned through the introduction of different hydrophobic substituents on the nitrogen atoms of the imidazole or imidazolium ring of the molecule. Taking this into consideration, we have synthesized and characterized a series of imidazole and imidazolium salts derived from L-valine and L-phenylalanine containing different hydrophobic groups and tested their antibacterial activity against two model bacterial strains, Gram-negative E. coli and Gram-positive B. subtilis. Importantly, the results demonstrate that the minimum bactericidal concentration (MBC) of these derivatives can be tuned to fall close to the cytotoxicity values in eukaryotic cell lines. The MBC value of one of these compounds toward B. subtilis was found to be lower than the IC50 cytotoxicity value for the control cell line, HEK-293. Furthermore, the aggregation behavior of these compounds has been studied in pure water, in cell culture media, and in mixtures thereof, in order to determine if the compounds formed self-assembled aggregates at their bioactive concentrations with the aim of determining whether the monomeric species were in fact responsible for the observed antibacterial activity. Overall, these results indicate that imidazole and imidazolium compounds derived from L-valine and L-phenylalanine—with different alkyl lengths in the amide substitution—can serve as potent antibacterial agents with low cytotoxicity to human cell lines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Antifungal Activity of Polyoxometalate-Ionic Liquids on Historical Brick

  • Rajkowska, K.
  • Koziróg, A.
  • Otlewska, A.
  • Piotrowska, M.
  • Atrián-Blasco, E.
  • Franco-Castillo, I.
  • Mitchell, S.G.
Moulds inhabiting mineral-based materials may cause their biodeterioration, contributing to inestimable losses, especially in the case of cultural heritage objects and architectures. Fungi in mouldy buildings may also pose a threat to human health and constitute the main etiological factor in building related illnesses. In this context, research into novel compounds with antifungal activity is of high importance. The aim of this study was to evaluate the antifungal activity of polyoxometalate-ionic liquids (POM-ILs) and their use in the eradication of moulds from historical brick. In the disc diffusion assay, all the tested POM-ILs inhibited growth of a mixed culture of moulds including Engyodontium album, Cladosporium cladosporioides, Alternaria alternata and Aspergillus fumigatus. These were isolated from the surfaces of historical brick barracks at the Auschwitz II-Birkenau State Museum in Oswiecim, Poland. POM-IL coatings on historical brick samples, under model conditions, showed that two compounds demonstrated very high antifungal activity, completely limiting mould growth and development. The antifungal activity of the POM-ILs appeared to stem from their toxic effects on conidia, as evidenced by environmental scanning transmission electron microscopy observations. The results herein indicated that POM-ILs are promising disinfectant materials for use not only on historical objects, but probably also on other mineral-based materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On-POM Ring-Opening Polymerisation of N-Carboxyanhydrides

  • Soria-Carrera, H.
  • Franco-Castillo, I.
  • Romero, P.
  • Martin, S.
  • de la Fuente, J.M.
  • Mitchell, S.G.
  • Martin-Rapun, R.
The ring-opening polymerisation of a-amino acid N-carboxyanhydrides (NCAs) offers a simple and scalable route to polypeptides with predicted and narrow molecular weight distributions. Here we show how polyoxometalates (POMs)-redox-active molecular metal-oxide anions-can serve as inorganic scaffold initiators for such NCA polymerisations. This "On-POM polymerisation" strategy serves as an innovative platform to design hybrid materials with additive or synergistic properties stemming from the inorganic and polypeptide component parts. We have used this synthetic approach to synthesise a library of bactericidal poly(lysine)-POM hybrid derivatives that can be used to prevent biofilm formation. This versatile "On-POM polymerisation" method provides a flexible synthetic approach for combining inorganic scaffolds with amino acids, and the potential to tailor and improve the specificity and performance of hybrid antimicrobial materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polyoxometalate-polypeptide nanoassemblies as peroxidase surrogates with antibiofilm properties

  • Soria-Carrera, H.
  • Atrián-Blasco, E.
  • de la Fuente, J. M.
  • Mitchell, S. G.
  • Martín-Rapún, R.
Developing artificial metalloenzymes that possess a superior performance to their natural counterparts is an attractive concept. Polyoxometalates (POMs) are a class of anionic molecular metal-oxides with excellent redox properties and bioactivity. We have recently introduced “POMlymers” - covalently conjugated POM-peptide hybrid materials - where the polypeptide chain is obtained through a ring-opening polymerisation (ROP) of a-amino acid N-carboxyanhydrides (NCA) on an inorganic POM scaffold. Attracted by the idea of preparing artificial metalloenzymes, here we report the supramolecular self-assembly of POMlymer hybrids into nanoparticles where an optimal environment for catalysis is created. Our results demonstrate that the self-assembly of covalent POMlymers, enhances the peroxidase-like activity of the parent POM anion whereas, in contrast, the catalytic activity for nanoparticles obtained by ionic self-assembly of the same peptide and POM components practically disappears. Furthermore, POMlymer nanoparticles also present antimicrobial and antibiofilm activity against the skin bacterium Staphylococcus epidermidis; whereas, ionic POM-peptide hybrids significantly increase biofilm production and endogenous production of reactive oxygen species. In summary, we present the self-assembly of POMlymer hybrids into nanoparticles and a combination of peroxidase activity and microbiology assays that show that the POM-peptide covalent bond is essential for the stability of the self-assembled nanoparticles and therefore for their catalytic and biological activity. © 2022 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

New protective coatings against lampenflora growing in the Pommery Champagne cellar

  • Franco-Castillo, I.
  • Misra, A.
  • Laratte, S.
  • Gommeaux, M.
  • Perarnau, R.
  • Vaillant-Gaveau, N.
  • Pierlot, C.
  • Streb, C.
  • Mitchell, S. G.
  • Eyssautier-Chuine, S.
Phototrophic microorganisms such as cyanobacteria and microalgae can proliferate readily in underground heritage sites where the introduction of artificial illumination equipment has significantly altered previously stable environmental conditions. The extended lampenflora biofilm growth on the bas-reliefs carved in the underground Pommery Champagne cellar in Reims (France) represents a recurring biocolonisation problem which requires periodic cleaning. The aim of this work was to limit the growth of lampenflora on chalk substrates using preventative biocidal treatments based on polyoxometalate ionic liquids (POM-ILs). Biocidal assays carried out in laboratory showed how two different colourless POM-IL coatings were more effective than commercial Preventol RI80 against two algal strains isolated from the Pommery bas reliefs, Pseudostichococcus monallantoides and Chromochloris zofingiensis. However, only one POM-IL variant was capable of sustained prevention of biofilm growth when applied to wet chalk, which replicates the more drastic natural environmental conditions of the cellar and can limit the performance of the biocidal coatings. Crucially, coating concentration studies demonstrate how POM-IL-coated slabs from previous experiments retain their biocidal activity and can prevent subsequent recolonisation following the re-inoculation of coated slabs with algae and cyanobacteria. Consequently, POM-ILs represent excellent candidates to eliminate lampenflora growth on the chalk bas-reliefs in the unique subterranean environment of the Pommery Champagne cellar. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polyoxometalate–peptide hybrid materials: from structure–property relationships to applications

  • Soria-Carrera, Héctor
  • Atrián-Blasco, Elena
  • Martín-Rapún, Rafael
  • Mitchell, Scott G.
Organo-functionalisation of polyoxometalates (POMs) represents an effective approach to obtain diverse arrays of functional structures and materials, where the introduction of organic moieties into the POM molecules can dramatically change their surface chemistry, charge, polarity, and redox properties. The synergistic combination of POMs and peptides, which perform a myriad of essential roles within cellular biochemistry, including protection and transport in living organisms, leads to functional hybrid materials with unique properties. In this Perspective article, we present the principal synthetic routes to prepare and characterise POM–peptide hybrids, together with a comprehensive description of how their properties – such as redox chemistry, stereochemistry and supramolecular self-assembly – give rise to materials with relevant catalytic, adhesive, and biomedical applications. By presenting the state-of-the-art of the POM–peptide field, we show specifically how emerging chemical approaches can be harnessed to develop tailored POM–peptide materials with synergistic properties for applications in a variety of disciplines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning of Mechanical Properties in Photopolymerizable Gelatin-Based Hydrogels for <i>In Vitro</i> Cell Culture Systems

  • Pamplona, Regina
  • González-Lana, Sandra
  • Romero, Pilar
  • Ochoa, Ignacio
  • Martín-Rapún, Rafael
  • Sánchez-Somolinos, Carlos
The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco’s modified Eagle’s medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Subcellular localization and therapeutic efficacy of polymeric micellar nanoparticles encapsulating bedaquiline for tuberculosis treatment in zebrafish

  • Bhandari, M.
  • Soria-Carrera, H.
  • Wohlmann, J.
  • Knudsen Dal, N. J.
  • Martínez de la Fuente, J.
  • Martín-Rapún, R.
  • Griffiths, G.
  • Fenaroli, F.
The combination drug regimens that have long been used to treat tuberculosis (TB), caused by Mycobacterium tuberculosis, are fraught with problems such as frequent administration, long duration of treatment, and harsh adverse effects, leading to the emergence of multidrug resistance. Moreover, there is no effective preventive vaccine against TB infection. In this context, nanoparticles (NPs) have emerged as a potential alternative method for drug delivery. Encapsulating antibiotics in biodegradable NPs has been shown to provide effective therapy and reduced toxicity against M. tuberculosis in different mammalian models, when compared to conventional free drug administration. Here, we evaluate the localization, therapeutic efficacy and toxic effects of polymeric micellar NPs encapsulating a promising but highly hydrophobic and toxic antitubercular drug bedaquiline (BQ) in zebrafish embryos infected with Mycobacterium marinum. Our study shows that the NP formulation of BQ improves survival and reduces bacterial burden in the infected embryos after treatment when compared to its free form. The intravenously injected BQ NPs have short circulation times due to their rapid and efficient uptake into the endothelial cells, as observed by correlative light and electron microscopy (CLEM).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluating the durability and performance of polyoxometalate-ionic liquid coatings on calcareous stones: Preventing biocolonisation in outdoor environments

  • Eyssautier-Chuine, S.
  • Franco-Castillo, I.
  • Misra, A.
  • Hubert, J.
  • Vaillant-Gaveau, N.
  • Streb, C.
  • Mitchell, S. G.
Rock-based materials exposed to outdoor environments are naturally colonised by an array of microorganisms, which can cause dissolution and fracturing of the natural stone. Biocolonisation of monuments and architectures of important cultural heritage therefore represents an expensive and recurring problem for local authorities and private owners alike. In this area, preventive strategies to mitigate biocolonisation are generally preferred to curative approaches, such as mechanical cleaning by brush or high-pressure cleaning, to remove pre-existing patina. The aim of this work was to study the interaction between biocidal polyoxometalate-ionic liquid (POM-IL) coatings and calcareous stones and evaluate the capacity of these coatings to prevent biocolonisation through a series of accelerated ageing studies in climate chambers, carried out in parallel with a two-year period of outdoor exposure in north-eastern France. Our experiments show that POM-IL coatings did not affect water vapour transfer nor significantly alter the total porosity of the calcareous stones. Simulated weathering studies replicating harsh (hot and wet) climatic weather conditions demonstrated that the colour variation of POM-IL-coated stones did not vary significantly with respect to the natural uncoated stones. Accelerated biocolonisation studies performed on the weathered POM-IL-coated stones proved that the coatings were still capable of preventing colonisation by an algal biofilm. However, a combination of colour measurements, chlorophyll fluorescence data, and scanning electron microscopy imaging of stones aged outdoors in northern France for two years showed that coated and uncoated stone samples showed signs of colonisation by fungal mycelium and phototrophs. Altogether, our results demonstrate that POM-ILs are suitable as preventative biocidal coatings for calcareous stones, but the correct concentrations must be chosen to achieve a balance between porosity of the stone, the resulting colour variation and the desired duration of the biocidal effect over longer periods of time, particularly in outdoor environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decoupling manufacturing from application in additive manufactured antimicrobial materials

  • Wales , D.J.
  • Miralles-Comins, S.
  • Franco-Castillo, I.
  • Cameron, J.M.
  • Cao, Q.
  • Karjalainen, E.
  • Alves Fernandes, J.
  • Newton, G.N.
  • Mitchell, S.G.
  • Sans, V.
3D printable materials based on polymeric ionic liquids (PILs) capable of controlling the synthesis and stabilisation of silver nanoparticles (AgNPs) and their synergistic antimicrobial activity are reported. The interaction of the ionic liquid moieties with the silver precursor enabled the controlled in situ formation and stabilisation of AgNPs via extended UV photoreduction after the printing process, thus demonstrating an effective decoupling of the device manufacturing from the on-demand generation of nanomaterials, which avoids the potential aging of the nanomaterials through oxidation. The printed devices showed a multi-functional and tuneable microbicidal activity against Gram positive (B. subtilis) and Gram negative (E. coli) bacteria and against the mould Aspergillus niger. While the polymeric material alone was found to be bacteriostatic, the AgNPs conferred bactericidal properties to the material. Combining PIL-based materials with functionalities, such as in situ and photoactivated on-demand fabricated antimicrobial AgNPs, provides a synergistic functionality that could be harnessed for a variety of applications, especially when coupled to the freedom of design inherent to additive manufacturing techniques.