Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dodecanuclear [NiII8Ln4] clusters: rings of corner-sharing {NiII2Ln2} cubanes (Ln = Dy, Gd, Y}

  • Tziotzi, Thomais G.
  • Agapaki, Eleftheria
  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Dalgarno, Scott J.
  • Evangelisti, Marco
  • Brechin, Euan K.
  • Milios, Constantinos J.
[Description of methods used for collection/generation of data] Magnetisation data were collected on MPMS-XL and MPMS3 SQUID magnetometers equipped with 5 and 7 T magnets, respectively. Diamagnetic corrections were applied using Pascal's constants. Heat capacity measurements were carried out on a PPMS equipped with a 9 T magnet and a 3He cryostat, using a thin pressed pellet (ca. 1 mg) of a polycrystalline sample of 2, thermalized by ca. 0.2 mg of Apiezon N grease, whose contribution was subtracted using a phenomenological expression., [Methods for processing the data] An indirect estimation of DS and DT was performed in accordance with standard thermodynamic formulations., The solvothermal reaction of NiCl2.6H2O with 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane, LH3, and Ln(OAc)3.4H2O in the presence of salicylaldehyde in MeOH leads to the formation of the dodecanuclear isostructural species [NiII8Ln4(L’)8(OAc)4(OH)8(H2O)4].xH2O (Ln= Dy, x=6 (1); Gd, x= 24 (2); Y, x= 10 (3); L’ = the dianion of the Schiff-base resulting from the reaction of salicylaldehyde and ethanolamine). The metallic core of the clusters describes a ring a of corner-sharing {Ni2Ln2} cubanes assembled on a central, planar rectangular {Ln4} unit. Magnetization studies conducted on complexes 1 - 3 demonstrate the presence of dominant ferromagnetic exchange at low temperatures, which is largely attributed to the Ni⋯Ni interactions. The significant magnetocaloric effect observed in the Gd analogue has been assessed through heat-capacity and magnetization measurements., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union − NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dodecanuclear [NiII8Ln4] clusters and rings of corner-sharing {NiII2Ln2} cubanes (Ln = Dy, Gd, Y); magnetic and magnetothermal properties

  • Tziotzi, Thomais G.
  • Agapaki, Eleftheria
  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Cervera, Marc Ubach I.
  • Dalgarno, Scott J.
  • Evangelisti, Marco
  • Brechin, Euan K.
  • Milios, Constantinos J.
The solvothermal reaction of NiCl2·6H2O with 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane, LH3, and Ln(OAc)3·4H2O in the presence of salicylaldehyde in MeOH leads to the formation of the dodecanuclear isostructural species [NiII8Ln4(L')8(OAc)4(OH)8(H2O)4]·xH2O (Ln = Dy, x = 6 (1); Gd, x = 24 (2); Y, x = 10 (3); L' = the dianion of the Schiff-base resulting from the reaction of salicylaldehyde and ethanolamine). The metallic core of the clusters describes a ring of corner-sharing {Ni2Ln2} cubanes assembled on a central, planar rectangular {Ln4} unit. Magnetization studies conducted on complexes 1-3 demonstrate the presence of dominant ferromagnetic exchange at low temperatures, which is largely attributed to the Ni⋯Ni interactions. The significant magnetocaloric effect observed in the Gd analogue has been assessed through heat capacity and magnetization measurements., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union – NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A linear {FeIII2NiII} cluster, a structurally closely related quasi 1D {FeIII2NiII} chain

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Evangelisti, Marco
  • Milios, Constantinos J.
The solvothermal reaction between FeCl3·6H2O, NiCl2·6H2O, 2-hydroxynaphthaldehyde, and glycine (gly) in MeOH results in the formation of the trinuclear heterometallic cluster [FeΙΙΙ2NiΙΙ(L1)4(MeOH)4] (1) in good yield, while the same reaction upon replacing gly with methyl-alanine (mAla), results in the formation of the closely related quasi 1D coordination polymer {[FeΙΙΙ2NiΙΙ(L2)4(MeOH)2]n} (2) (L1, L2: the dianionic form of the Schiff-base ligand derived from the condensation of 2-hydroxynaphthaldehyde and gly (L1 for 1), or mAla (L2 for 2)). The structure of 1 describes a linear trimetallic {FeIII2Ni} unit, whereas complex 2 consists of repeating linear {FeIII2Ni} units with each one connected to two neighboring units via four coordination bonds, forming a quasi-1D chain. The structural similarity between complex 1 and the repeating unit of complex 2 is remarkable. However, their magnetic properties differ significantly, with complex 1 displaying dominant ferromagnetic interactions, and complex 2 showing antiferromagnetic interactions., This work has received support from EU (MSCA-DN MolCal,101119865), MICIU/AEI/10.13039/501100011033/, and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Large sub-Kelvin Magnetocaloric Effect and Phase Behavior of Gadolinium Nitrate Hexahydrate [Dataset]

  • Gracia, David
  • Ubach I Cervera, Marc
  • Charkiolakis, Emmanouil K.
  • García, Inés
  • Milios, Constantinos J.
  • Evangelisti, Marco
Continuous-wave electron paramagnetic resonance (EPR) measurements on a 1% diluted polycrystalline sample of [Gd@Y(NO3)3]6H2O were recorded using a Bruker Elexys 580 spectrometer operating in X-band (9.715 GHz). The spectrometer was equipped with an Oxford CF900 continuous-flow cryostat, which employs liquid-helium to cool down the sample environment. The microwave power was adjusted to avoid saturation effects. The magnetic field was measured with a Bruker ER035 gaussmeter. Direct-current (DC) magnetic measurements were performed on a polycrystalline powder sample (ca. 5 mg), loaded into a plastic capsule and immobilized with eicosane wax to prevent grain movement. Isothermal magnetization curves were collected in magnetic fields between 0-7 T over the temperature range 2-10 K. DC magnetic susceptibility data were recorded over the same temperature range under a constant applied magnetic field of B=0.1 T. All data obtained were corrected for diamagnetic contributions coming from both the sample holder and eicosane wax. In addition, the complex alternating-current (AC) magnetic susceptibility was measured under zero applied magnetic field over the temperature range 0.05-4 K, using a frequency of 525 Hz and an AC field amplitude of 2·10^{-4} T. A thin pressed polycrystalline pellet (ca. 6 mg) was prepared for these experiments, and susceptibility data were initially recorded in arbitrary units. Absolute values of the real component were obtained by comparison with DC susceptibility data collected with the MPMS-3 in the overlapping temperature range (2-4 K), where dissipative processes are negligible. The imaginary component is reported in arbitrary units. Heat capacity measurements were carried out using the relaxation method in a Quantum Design PPMS equipped with a 3He cryostat, covering temperatures down to 0.4 K under constant magnetic fields from 0 to 7 T. Additional measurements extended to 0.05 K under fields up to 1 T using a Quantum Design PPMS DynaCool with DR module. Samples consisted of thin pressed polycrystalline pellets (ca. 1 mg for 3He and ca. 0.2 mg for DR). In both setups, Apiezon N grease (0.2 mg) was applied to ensure good thermal contact between the sample and the calorimeter platform. Its contribution to the total heat capacity was subtracted using a phenomenological correction. Direct quasi-adiabatic MCE measurements were performed for complete demagnetization processes. For these experiments, a pressed polycrystalline pellet of ca. 5 mg was mounted on a calorimeter platform coated with ca. 0.2 mg of Apiezon N grease to improve thermal coupling. In addition, the MCE was also evaluated indirectly by applying standard thermodynamic relations to the measured magnetization and heat capacity data., We report a comprehensive magnetothermal study of the classical gadolinium salt [Gd(NO3)3]·6H2O at temperatures approaching absolute zero. Despite its long-standing availability as a commercial compound, its magnetocaloric properties have remained unexplored. Using electron paramagnetic resonance, magnetic susceptibility, heat capacity, and direct measurements of the magnetocaloric effect, we reveal that weak dipolar interactions combined with axial crystal-field anisotropy drive antiferromagnetic ordering at T_N = 0.21 K. Remarkably, [Gd(NO3)3]·6H2O exhibits an isothermal magnetic entropy change of -\Delta S_m = 26.1 J / K kg at T = 0.6 K for a modest field variation of Delta-B = 1 T, and an adiabatic temperature change of Delta-T_ad = 5.0 K at T = 1.6 K for the same Delta-B, outperforming many state-of-the-art Gd-based refrigerants. These results provide a reference for understanding magnetocaloric behavior in hydrated salts and highlight the interplay between crystal-field anisotropy and dipolar coupling at ultra-low temperatures., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, PID2024-159457OB-C21, CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large sub-Kelvin magnetocaloric effect and phase behavior of gadolinium nitrate hexahydrate

  • Gracia, David
  • Ubach I Cervera, Marc
  • Charkiolakis, Emmanouil K.
  • García, Inés
  • Milios, Constantinos J.
  • Evangelisti, Marco
We report a comprehensive magnetothermal study of the classical gadolinium salt [Gd(NO3)3] · 6H2O at temperatures approaching absolute zero. Despite its long-standing availability as a commercial compound, its magnetocaloric properties have remained unexplored. Using electron paramagnetic resonance, magnetic susceptibility, heat capacity, and direct measurements of the magnetocaloric effect, we reveal that weak dipolar interactions combined with axial crystal-field anisotropy drive antiferromagnetic ordering at TN = 0.21 K. Remarkably, [Gd(NO3)3] · 6H2O exhibits an isothermal magnetic entropy change of −ΔSm = 26.1 J K−1 kg−1 at T = 0.6 K for a modest field variation of ΔB = 1 T and an adiabatic temperature change of ΔTad = 5.0 K at T = 1.6 K for the same ΔB, placing its performance among the strongest reported for Gd-based refrigerants under comparable low-field and sub-Kelvin conditions. These results provide a reference for understanding magnetocaloric behavior in hydrated salts and highlight the interplay between dipolar coupling and crystal-field anisotropy., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/, and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Tetradecanuclear {Ni9Ln5} clusters featuring encapsulated {Ln5} bipyramids: Modular 3d-4f architectures with broad-range magnetocaloric response

  • Tziotzi, Thomais G.
  • Asmargiannaki, Evangelia G.
  • Thamm, Ben
  • Dalgarno, Scott J.
  • Charkiolakis, Emmanouil K.
  • Ubach I Cervera, Marc
  • Gracia, David
  • Evangelisti, Marco
  • Milios, Constantinos J.
Magnetisation data were collected on a QD-MPMS3 SQUID magnetometer equipped with a 7 T magnet. Diamagnetic corrections were applied using Pascal's constants., Heat capacity measurements were carried out on a QD-PPMS equipped with a 9 T magnet and a 3He cryostat, using a thin pressed pellet (ca. 1 mg) of polycrystalline samples of 1 and 3, thermalized by ca. 0.2 mg of Apiezon N grease, whose contribution was subtracted using a phenomenological expression., Crystallographic data for compounds 1 - 3 have been deposited at the CCDC under numbers 2533099 - 2533101, respectively, and can be obtained from https://www.ccdc.cam.ac.uk/structures/., The solvothermal reaction between Ni(HCOO)2.2H2O, 2-aminoisobutyric acid (aibH), Ln(OAc)3·6H2O (Ln = Gd, Y, Dy) and NEt3 in MeOH/MeCN affords the tetradecanuclear [Ni9Ln5(OH)9(aib)12(OAc)x(ΗCOO)y].12MeCN complexes (Ln= Gd, x=6, y=6, 1.12MeCN; Ln= Y, x=6, y=6, 2.12MeCN; Ln= Dy, x=3, y=9, 3.12MeCN) in good yields. All three clusters are isostructural, featuring a trigonal bipyramidal {Ln5} core encapsulated within a triply edge-capped {[NiII3]NiII6} trigonal prism. Magnetic measurements reveal dominant ferromagnetic intermolecular interactions in the Gd and Dy analogues, whereas the Y derivative exhibits weak antiferromagnetic behavior. Magnetothermal and heat-capacity measurements for 1.12MeCN indicate a significant magnetocaloric effect, reaching −∆Sm= 29.0 J kg-1K-1 for full demagnetization from B = 7 T at T = 3.0 K, while sustaining large −ΔSm(T,ΔB) and ΔTad(T,ΔB) responses across an unusually broad temperature range., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union − NextGenerationEU., CEX2023-001286-S, Figure 5: T1, T2, T3 = temperature for compounds 1, 2 and 3, respectively. x1, x2, x3 = magnetic susceptibility for compounds 1, 2 and 3, respectively. T2fit, x2fit = simulated temperature and susceptibility for compound 2. B = applied magnetic field M2K, M3K = molar magnetization at 2K and 3K, respectively. Bfit, M2Kfit = simulated magnetic field and magnetization at 2K Figure 6: T0, T1T = temperature for zero applied magnetic field and 1T, respectively. C0, C1T = molar heat capacity for zero applied magnetic field and 1T, respectively. T0fit, C0fit = simulated temperature and heat capacity for zero applied magnetic field. Figure 7: TDSmC = temperature for magnetic entropy change (DSm) data calculated from heat capacity (C). DSmC1T = DSm calculated from C for 1T applied magnetic field. TDSmM = temperature for DSm data calculated from magnetization (M). DSmC1T = DSm calculated from M for 1T applied magnetic field. TDTad = temperature for adiabatic temperature change (DTad) data. DTad1T = DTad for 1T applied magnetic field., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Temperature-driven elastocaloric enhancement in liquid crystal elastomers

  • Rojo, Kenneth Roy
  • Cosculluela, Carlos
  • Téllez, Pedro
  • Sánchez-Somolinos, Carlos
  • Evangelisti, Marco
[Description of methods used for collection/generation of data]: Differential scanning calorimetry measurements were performed using DSC Q1000 (TA Instruments) on both the LCE and its precursor. The sample pan utilized for both measurements was the hermetically sealed Tzero aluminum pan (TA Instruments). The heating rate was consistently maintained at 5 °C/min. The temperature modulation parameters were set to a period of 50 seconds and an amplitude of ± 0.663 °C. Before each heating procedure, a 15-minute isothermal interval was applied to allow the equipment to stabilize and reach the designated modulation parameters. Three heat cycles were programmed per measurement with each heat-cool cycle followed by a Newtonian cooling quench. The initial and secondary heat-cool cycles effectively erased the thermal history of the samples. The values presented herein were gathered from the third and final heating cycle. Broadband Dielectric Spectroscopy (BDS) measurement of the prepared LCE material was taken using the Alpha-Beta Impedance Analyzer (Novocontrol). The measurement frequency range was 10^[-1] to 10^[7] Hz. The sample was positioned between 20-mm diameter gold-plated electrodes and subsequently loaded into the Active Sample Cell (Novocontrol) sample stage. The sample was proportioned with a larger diameter than the electrodes to ensure an overhang and prevent short-circuit. The root mean square of the applied AC voltage was 1.0 Vrms. To investigate the polymer dynamics, dielectric measurements were conducted in isothermal mode with a temperature step value of 5 °C/min from -120 to 100 °C/min. The temperature control of each isothermal measurement was maintained by the Quatro Cryosystem (Novocontrol), exhibiting a temperature stability better than ± 0.28$ K. Dynamic mechanical analysis (DMA) measurements were performed using DMA Q800 (TA Instruments) in tension mode. LCE samples were portioned into 25~mm long strips with a width of 2-6 mm. The single-frequency measurement was conducted at a frequency of 1~Hz. The oscillation amplitude was set to 0.37 strain. The sample was initially equilibrated at -100 °C for 5 minutes and then heated up to 70 °C at a heating rate of 2 °C/min. Tensile equipment: A custom-built tensile setup was developed to perform the deformation cycles required for direct measurements of the eC effect. A belt-drive motor provided strain load with an accuracy of ± 0.1 mm. The loading strain rate was set such that the loading strain was reached within 0.2 s, while unloading was performed at the maximum attainable rate of the motor, corresponding to -1200 mm/s. The sample stage was enclosed within a PID-controlled heating chamber to enable precise temperature regulation. The tensile apparatus was housed inside a polystyrene enclosure for temperature regulation, and active cooling was achieved by introducing a controlled nitrogen gas flow into the enclosure. Temperature measurements: Infrared thermography was employed to conduct contact-less temperature measurements. A FLIR A655sc (Teledyne FLIR) with 25°C field of view is pointed towards the thermal window of the polystyrene case. To minimize IR reflections and background noise, the upper surface of the polystyrene enclosure was uniformly covered with black electrical tape. All IR videos were captured at a frame rate of 50 frames per second. The sample temperature was extracted as the mean value of the central third of the visible LCE surface, both in the undeformed and elongated states., [Methods for processing the data]: For elastocaloric measurements, the initial temperature was defined as the time‑equilibrated temperature of the undeformed sample region immediately prior to loading. Following deformation, temperature values were obtained from the corresponding central region of the elongated sample, and after unloading from the central region of the recovered geometry. In cases where partial out‑of‑focus regions arose due to sample bending or delayed geometric recovery, temperature analysis was restricted to the central in‑focus area. The adiabatic temperature change was determined relative to the initial equilibrated temperature preceding each loading or unloading event. For BDS measurements, the characteristic relaxation time of every molecular motion was simulated using either Havriliak-Negami (for cooperative relaxations) or Cole-Cole equation (for local relaxations)., Liquid crystal elastomers exhibit promising elastocaloric behavior, yet all direct measurements reported to date have been restricted to room temperature. Here, we perform variable-temperature direct elastocaloric measurements on an isotropic liquid crystal elastomer using a custom tensile setup coupled with infrared thermography, enabling fast mechanical cycling across a broad temperature range. As temperature decreases from ambient conditions, the elastocaloric response increases markedly, peaking near –3.5 ◦C with adiabatic temperature changes of ∆T+ = 3.94 ◦C and ∆T− = −4.33 ◦C at 60 % strain. By correlating these measurements with a detailed investigation of polymer dynamics, we identify a finite temperature window in which the elastocaloric response is maximized. This optimum arises from kinetic timescale matching between molecular relaxations and the mechanical loading-unloading cycle. These results establish kinetic control as a key factor governing the temperature dependence of elastocaloric performance in liquid crystal elastomers., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S), Gobierno de Aragón (PROY_E28_24), ERDF/EU and Fondo Social Europeo (DGA E15_20R), CIBER - Consorcio Centro de Investigación Biomédica en Red (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Large sub-Kelvin magnetocaloric effect and phase behavior of gadolinium nitrate hexahydrate

  • Gracia, David
  • Ubach I Cervera, Marc
  • Charkiolakis, Emmanouil K.
  • García-Rubio, Inés
  • Milios, Constantinos J.
  • Evangelisti, Marco
We report a comprehensive magnetothermal study of the classical gadolinium salt [Gd(NO3)3] · 6H2O at temperatures approaching absolute zero. Despite its long-standing availability as a commercial compound, its magnetocaloric properties have remained unexplored. Using electron paramagnetic resonance, magnetic susceptibility, heat capacity, and direct measurements of the magnetocaloric effect, we reveal that weak dipolar interactions combined with axial crystal-field anisotropy drive antiferromagnetic ordering at TN = 0.21 K. Remarkably, [Gd(NO3)3] · 6H2O exhibits an isothermal magnetic entropy change of −ΔSm = 26.1 J K−1 kg−1 at T = 0.6 K for a modest field variation of ΔB = 1 T and an adiabatic temperature change of ΔTad = 5.0 K at T = 1.6 K for the same ΔB, placing its performance among the strongest reported for Gd-based refrigerants under comparable low-field and sub-Kelvin conditions. These results provide a reference for understanding magnetocaloric behavior in hydrated salts and highlight the interplay between dipolar coupling and crystal-field anisotropy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Temperature-driven elastocaloric enhancement in amorphous elastomers with liquid-crystal mesogens

  • Rojo, Kenneth Roy
  • Cosculluela, Carlos
  • Téllez, Pedro
  • Sánchez-Somolinos, Carlos
  • Evangelisti, Marco
We report variable-temperature, direct elastocaloric measurements on an amorphous elastomer with liquid-crystal mesogens exhibiting mechanotropic ordering. Using a custom tensile setup coupled with infrared thermography, we enable rapid mechanical cycling across a broad temperature range. As temperature decreases from ambient conditions, the elastocaloric response increases markedly, reaching a maximum near −3.5 °C with adiabatic temperature changes of ΔT+ = 3.9 °C and ΔT− = −4.3 °C at 60% strain. By correlating these measurements with polymer-dynamics analysis, we identify a finite temperature window in which the elastocaloric response is maximized. This optimum reflects kinetic matching between molecular relaxation dynamics and the timescale of the mechanical loading–unloading cycle.