Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Advanced manufacturing of polymeric materials: From molecule to application through processing

  • Sánchez-Somolinos, Carlos
Resumen del trabajo presentado al nanoGe Fall Meeting, celebrado online del 18 al 22 de octubre de 2021., PRIME has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 829010. STORM-BOTS has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956150. Funding has also been received from the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragon and FEDER (EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robotic pick-and-place operations in multifunctional liquid crystal elastomers

  • Lyu, Pengrong
  • Astam, Mert Orhan
  • Sánchez-Somolinos, Carlos
  • Liu, Danqing
Pick-and-place operations for transporting objects precisely to a target position are a prominent function of (soft-) robotic systems. Therefore, there is great interest in industry to improve the characteristic gripping, holding, and releasing methods involved in pick-and-place operations. Within living organisms such as octopi, nature demonstrates that multiple types of conjointly working actuators are required for flexible pick-and-place operations. Herein, a multifunctional soft robotic arm is developed, capable of transporting an object within 3D space. The soft robotic arm consists of two structural actuators (rotating base and lifting unit) and a suction cup-based gripper. The structural actuator acts as both the load bearing and actuating components of the robotic system. Yet, the gripper is the crucial innovation within the robotic arm. A cephalopod-limb-inspired gripper functioning through the reversible flat-to-conical deformation of azimuthally aligned liquid crystal elastomer (LCE) films is proposed. The pressure-generating actuation mechanism of the gripper means that no external device is needed to operate the gripping function. Akin to natural systems, the in-tandem operation of the actuators in the soft robotic arm allows for multifactored tasks. Yet, the design achieves this through the use of a single material, which is not innate in natural archetypes., The authors thank financial support from CRT Starterspakket from ICMS, Eindhoven University of Technology, the Netherlands Organization for Scientific Research (NWO OCENW.KLEIN. 10854, START-UP 8872), the European Union's Horizon 2020 Research and Innovation Programmer under the Marie Sklodowska-Curie grant agreement no. 956150 (STORM-BOTS). C.S.S. thanks the Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) project PID2020-118485RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multimodal and multistimuli 4D-printed magnetic composite liquid crystal elastomer actuators

  • Espíndola-Pérez, Erick R.
  • Campo, Javier
  • Sánchez-Somolinos, Carlos
Liquid crystal elastomer (LCE)-based soft actuators are being studied for their significant shape-changing abilities when they are exposed to heat or light. Nevertheless, their relatively slow response compared with soft magnetic materials limits their application possibilities. Integration of magnetic responsiveness with LCEs has been previously attempted; however, the LCE response is typically jeopardized in high volumes of magnetic microparticles (MMPs). Here, a multistimuli, magnetically active LCE (MLCE), capable of producing programmable and multimodal actuation, is presented. The MLCE, composed of MMPs within an LCE matrix, is generated through extrusion-based 4D printing that enables digital control of mesogen orientation even at a 1:1 (LCE:MMPs) weight ratio, a challenging task to accomplish with other methods. The printed actuators can significantly deform when thermally actuated as well as exhibit fast response to magnetic fields. When combining thermal and magnetic stimuli, modes of actuation inaccessible with only one input are achieved. For instance, the actuator is reconfigured into various states by using the heat-mediated LCE response, followed by subsequent magnetic addressing. The multistimuli capabilities of the MLCE composite expand its applicability where common LCE actuators face limitations in speed and precision. To illustrate, a beam-steering device developed by using these materials is presented., The described research is part of the project STORM-BOTS. This project has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No 956150. The Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)’’ provided funding for this work through AEI/FEDER(UE) project PID2020-118485RB-I00 and by “European Regional Development Fund a way of making Europe” by the European Union; Gobierno de Aragón project LMP221_21, FEDER (EU) and through the “Fondo Social Europeo” (DGA E15_20R and DGA E11_23R). This research was also supported by CIBER (Consorcio Centro de Investigación Biomédica en Red) (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. C.S.S. thanks the FAB3D interdisciplinary platform (PTI-CSIC) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photochemically induced propulsion of a 4D printed liquid crystal elastomer biomimetic swimmer

  • Sartori, Paolo
  • Singh Yadav, Rahul
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape-changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene-containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate-intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four-lapped ephyra-like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate-intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light-fueled robotic LCE free-swimmers., The described research was part of the project STORM-BOTS. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 956150. Funding has also been received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00, PID2020-113003GB-I00, CTQ2017-84087-R and CNS2022-135887, Gobierno de Aragón project LMP221_21, FEDER (EU) and Fondo Social Europeo (DGA E15_20R). This research was also supported by the CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. This was partially supported also by MUR-PRIN 2022, project ABYSS: Accurate simulation of Bio-hYbrid Soft Swimmers, Grant No. 2022BN3RAC, CUP: D53D23003410006, funded by the European Union - Next Generation EU. C.S.S. would like to thank the FAB3D interdisciplinary platform (PTI-CSIC) for support. A.D.S. gratefully acknowledges support from the EU Horizon 2020 programme (ERC PoC Grant no. 101069 Stripe-o-Morph)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aligning and observing the liquid crystal director in 3D using small magnetic fields and a wedge-cell

  • Gulati, Lovish
  • Sánchez-Somolinos, Carlos
  • Giesselmann, Frank
  • Fischer, Peer
The mechanical and optical properties of liquid crystalline materials are largely dependent on the director profile. More complex soft robotic functions and programmed optical properties require spatially varying director profiles, ideally in 3D. However, it is challenging to achieve arbitrary director orientation with most established alignment techniques, as one needs to overcome surface interactions, use high electric or magnetic field strengths and temperatures. Another experimental difficulty is that there is a lack of suitable techniques that can be used to characterize the director in 3D. Here, this study first shows that the addition of 5CB to reactive mesogens permits cross-linked liquid crystalline materials to be fabricated with a spatially varying 3D director profile using weak magnetic fields (0.13 T). This study also shows, how these can be characterized with an optical technique that uses a wedge cell to visualize the programmed 3D director profile. Interestingly, the method also permits the real-time observation of the director. This work shows that it is possible to precisely control the director in 3D with low magnetic fields and that the dynamics can be directly observed, which facilitates potential applications of soft liquid crystalline (LC) gels and potentially also elastomers., The described research is part of the project STORM-BOTS. This project has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No 956150. Funding has also been received by Grant PID2020-118485RB-I00 funded by MCIN/AEI/10.13039/ 501100011033, and by CIBER-Consorcio Centro de Investigacioń Biomed́ica en Red (CB16/01/00263), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). This work has been supported by Gobierno de Aragón, FEDER (EU) and Fondo Social Europeo (DGA E15_20R)., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-photochemically responsive liquid crystal elastomer for underwater actuation

  • Nemati, Yasaman
  • Yang, Qi
  • Sohrabi, Fereshteh
  • Timonen, Jaakko V.I.
  • Sánchez-Somolinos, Carlos
  • Honkanen, Mari
  • Zeng, Hao
  • Priimagi, Arri
The quest for small-scale, remotely controlled soft robots has led to the exploration of magnetic and optical fields for inducing shape morphing in soft materials. Magnetic stimulus excels when navigation in confined or optically opaque environments is required. Optical stimulus, in turn, boasts superior spatial precision and individual control over multiple objects. Herein, we bring these two methodologies together and present a monolithic liquid crystal elastomer (LCE) system that synergistically combines magnetic and photochemical actuation schemes. The resultant composite material showcases versatile possibilities for underwater actuation, and we demonstrate robotic functionalities where the optical and magnetic response can be leveraged in different tasks (object gripping and object translocation, respectively) or where light can be used as a control signal to tune the magnetically induced actuation. Combining these two remote actuation methods offers powerful, dual-mode control in wireless, small-scale robotics, especially in submersed environments due to their isothermal nature., This work is financially supported by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement 956150 (STORM-BOTS) and by the European Research Council (Starting Grant project ONLINE, No. 101076207, for H.Z. and Consolidator Grant project MULTIMODAL, No. 101045223, for A.P.). We gratefully acknowledge the support from the Academy of Finland through Center of Excellence Life-Inspired Hybrid Materials (LIBER, No. 346107, 346112, 364206) and the Flagship Programme on Photonics Research and Innovation, No. 320165. C.S.S. acknowledges funding received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00, Gobierno de Aragón, FEDER (EU) and Fondo Social Europeo (DGA E15_20R). C.S.S. is also supported by CIBER─Consorcio Centro de Investigación Biomédica en Red─(CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. Q.Y. acknowledges the support from China Scholarship Council (CSC). The authors thank Tero-Petri Ruoko for assistance with the function generator. SEM-EDS work made use of Tampere Microscopy Center facilities at Tampere University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Holographic whole-object photopolymerization preserving director alignment in liquid crystalline actuators

  • Gulati, Lovish
  • Junhee, Lee
  • Norouzikudiani, Reza
  • Li, Jianfeng
  • Sánchez-Somolinos, Carlos
  • DeSimone, Antonio
  • Melde, Kai
  • Song, Alexander
  • Fischer, Peer
Liquid crystalline (LC) crosslinked polymeric structures are promising for soft robotic applications, as their actuation profile is intrinsically encoded and results from the structure's shape and the LC molecular orientation (director). However, it remains challenging to fabricate 3D objects and at the same time control the director orientation within the 3D structure. Liquid crystalline molecules are commonly aligned using modified surfaces or electric/magnetic fields. However, additive manufacturing methods may locally distort the director, when fabricating 3D objects. Here, holographic microlithography is employed to form entire connected 3D objects in a single exposure by cross-linking the LC, while allowing the director orientation within the object to be freely controlled. This enables us to independently choose a global director orientation and then realize complex 3D geometries in a single fabrication step. This approach avoids the director distortion present in sequential 3D printing and lithography methods, and allows for complex actuation profiles that are directly linked to the 3D director orientation. The method presented herein permits the rapid fabrication of complex 3D connected LC structures while preserving the molecular order, and thereby enables the fabrication of more complex 3D soft actuators., The research is part of the project STORM-BOTS, and the authors acknowledge funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 956150. J.L. and K.M. acknowledge funding by the Carl–Zeiss–Stiftung (Nexus grant no. P2022-04-073). J.Li acknowledges the support from Deutsche Forschungsgemeinschaft (DFG) under Excellence Cluster 3D Matter Made to Order (EXC-2082/1–390761711). C.S.S. acknowledges MICIU/AEI/10.13039/501100011033, grants PID2020-118485RB-I00 and CEX2023-001286-S, Gobierno de Aragón project PROY_E28_24, FEDER (EU) and Fondo Social Europeo (DGA E15_20R), CIBER–Consorcio Centro de Investigación Biomédica en Red–(CB06/01/00263)., Open access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multimodal and Multistimuli 4D-Printed Magnetic Composite Liquid Crystal Elastomer Actuators

  • Espíndola-Pérez, Erick R.
  • Campo, Javier
  • Sánchez-Somolinos, Carlos
Liquid crystal elastomer (LCE)-based soft actuators are being studied for their significant shape-changing abilities when they are exposed to heat or light. Nevertheless, their relatively slow response compared with soft magnetic materials limits their application possibilities. Integration of magnetic responsiveness with LCEs has been previously attempted; however, the LCE response is typically jeopardized in high volumes of magnetic microparticles (MMPs). Here, a multistimuli, magnetically active LCE (MLCE), capable of producing programmable and multimodal actuation, is presented. The MLCE, composed of MMPs within an LCE matrix, is generated through extrusion-based 4D printing that enables digital control of mesogen orientation even at a 1:1 (LCE:MMPs) weight ratio, a challenging task to accomplish with other methods. The printed actuators can significantly deform when thermally actuated as well as exhibit fast response to magnetic fields. When combining thermal and magnetic stimuli, modes of actuation inaccessible with only one input are achieved. For instance, the actuator is reconfigured into various states by using the heat-mediated LCE response, followed by subsequent magnetic addressing. The multistimuli capabilities of the MLCE composite expand its applicability where common LCE actuators face limitations in speed and precision. To illustrate, a beam-steering device developed by using these materials is presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photochemically Induced Propulsion of a 4D Printed Liquid Crystal Elastomer Biomimetic Swimmer

  • Sartori, Paolo
  • Yadav, Rahul Singh
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape‐changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene‐containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate‐intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four‐lapped ephyra‐like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate‐intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light‐fueled robotic LCE free‐swimmers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aligning and Observing the Liquid Crystal Director in 3D Using Small Magnetic Fields and a Wedge-Cell

  • Gulati, Lovish
  • Sánchez-Somolinos, Carlos
  • Giesselmann, Frank
  • Fischer, Peer
The mechanical and optical properties of liquid crystalline materials are largely dependent on the director profile. More complex soft robotic functions and programmed optical properties require spatially varying director profiles, ideally in 3D. However, it is challenging to achieve arbitrary director orientation with most established alignment techniques, as one needs to overcome surface interactions, use high electric or magnetic field strengths and temperatures. Another experimental difficulty is that there is a lack of suitable techniques that can be used to characterize the director in 3D. Here, this study first shows that the addition of 5CB to reactive mesogens permits cross‐linked liquid crystalline materials to be fabricated with a spatially varying 3D director profile using weak magnetic fields (0.13 T). This study also shows, how these can be characterized with an optical technique that uses a wedge cell to visualize the programmed 3D director profile. Interestingly, the method also permits the real‐time observation of the director. This work shows that it is possible to precisely control the director in 3D with low magnetic fields and that the dynamics can be directly observed, which facilitates potential applications of soft liquid crystalline (LC) gels and potentially also elastomers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Holographic Whole‐Object Photopolymerization Preserving Director Alignment in Liquid Crystalline Actuators

  • Gulati, Lovish
  • Lee, Junhee
  • Norouzikudiani, Reza
  • Li, Jianfeng
  • Sánchez Somolinos, Carlos
  • DeSimone, Antonio
  • Melde, Kai
  • Song, Alexander
  • Fischer, Peer
Liquid crystalline (LC) crosslinked polymeric structures are promising for soft robotic applications, as their actuation profile is intrinsically encoded and results from the structure's shape and the LC molecular orientation (director). However, it remains challenging to fabricate 3D objects and at the same time control the director orientation within the 3D structure. Liquid crystalline molecules are commonly aligned using modified surfaces or electric/magnetic fields. However, additive manufacturing methods may locally distort the director, when fabricating 3D objects. Here, holographic microlithography is employed to form entire connected 3D objects in a single exposure by cross‐linking the LC, while allowing the director orientation within the object to be freely controlled. This enables us to independently choose a global director orientation and then realize complex 3D geometries in a single fabrication step. This approach avoids the director distortion present in sequential 3D printing and lithography methods, and allows for complex actuation profiles that are directly linked to the 3D director orientation. The method presented herein permits the rapid fabrication of complex 3D connected LC structures while preserving the molecular order, and thereby enables the fabrication of more complex 3D soft actuators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Programming of Complex Magnetic Profiles Enforced by 4D Printed Magnetic LCE Actuators

  • Espíndola-Pérez, Erick R.
  • Goyal, Rahul
  • Gulati, Lovish
  • López-Valdeolivas, María
  • Fischer, Peer
  • Sánchez-Somolinos, Carlos
Magnetic soft actuators enable untethered, contact‐free actuation yet they are fundamentally limited by the difficulty of programming complex, three‐dimensional (3D), spatially non‐uniform magnetic profiles. Here, we introduce a four‐dimensional (4D) printing‐enabled magnetic programming strategy that overcomes this challenge by magnetizing magnetically active liquid crystal elastomers (MLCEs) in thermally actuated target states. Digitally prescribed director architectures define deterministic 3D deformations at elevated temperature, which serve as intrinsic programming templates during magnetization under a spatially uniform magnetic field. Upon cooling, relaxation of the thermomechanical deformation transforms the initially uniform magnetization into a complex, spatially varying magnetic profile that encodes the target shape as a magnetically favoured configuration. This approach enables the recovery of thermally defined shapes at room temperature under low magnetic fields and allows bidirectional and multistate actuation via simple reversal of field direction. By integrating spatial magnetic programming with controlled geometric asymmetry, we demonstrate frequency‐tunable linear locomotion and chirality‐encoded clockwise or anticlockwise rotational motion in multimaterial soft robotic architectures. This strategy decouples magnetic profile complexity from magnetization hardware, providing a scalable, template‐free route to fully 3D magnetic programming for soft robotics and untethered actuators operating under low‐field conditions.