Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photochemically induced propulsion of a 4D printed liquid crystal elastomer biomimetic swimmer

  • Sartori, Paolo
  • Singh Yadav, Rahul
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape-changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene-containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate-intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four-lapped ephyra-like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate-intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light-fueled robotic LCE free-swimmers., The described research was part of the project STORM-BOTS. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 956150. Funding has also been received from Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” through AEI/FEDER(UE) PID2020-118485RB-I00, PID2020-113003GB-I00, CTQ2017-84087-R and CNS2022-135887, Gobierno de Aragón project LMP221_21, FEDER (EU) and Fondo Social Europeo (DGA E15_20R). This research was also supported by the CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. This was partially supported also by MUR-PRIN 2022, project ABYSS: Accurate simulation of Bio-hYbrid Soft Swimmers, Grant No. 2022BN3RAC, CUP: D53D23003410006, funded by the European Union - Next Generation EU. C.S.S. would like to thank the FAB3D interdisciplinary platform (PTI-CSIC) for support. A.D.S. gratefully acknowledges support from the EU Horizon 2020 programme (ERC PoC Grant no. 101069 Stripe-o-Morph)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Delayed crosslinking enables ultra-high-resolution melt electrowriting of responsive liquid crystal elastomers

  • Javadzadeh, Mehrzad
  • Fernández-Melero, María
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
Melt electrowriting (MEW) enables the fabrication of finely structured scaffolds with sub-micrometer resolution. However, reducing the inter-fiber distance (IFD) in MEW remains challenging due to electrostatic interactions between the charged polymer jet and previously deposited fibers, often leading to fiber bridging. Recently, we demonstrated that MEW of reactive liquid crystalline inks, followed by ultraviolet (UV) photopolymerization, enables the fabrication of digitally positioned liquid crystal elastomer (LCE) structures. Building on this, we demonstrate that tuning the UV light intensity during photopolymerization significantly improves the achievable resolution range. Lower UV intensities produce smaller minimum IFDs without fiber bridging, enabling the fabrication of highly ordered structures with IFDs down to 11 µm for 5 µm-diameter fibers, a feature that, to the best of our knowledge, surpasses the smallest IFDs previously reported for MEW. We hypothesize that slower crosslinking kinetics extend the time window for charge dissipation, reducing electrostatic interactions between the jet and the previously deposited fibers. Although the mechanism remains unclear, local variations in material flow or curing-induced surface morphology may also affect electric field distribution. Beyond resolution improvements, this strategy enables defect-free fabrication of stimuli-responsive LCEs with programmable shape transformation and actuation. UV light intensity thus emerges as a critical design parameter for MEW, with implications for other photo-crosslinkable systems., The described research is part of the project PRIME. This project received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 829010 (PRIME). Funding had also been received from the Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” MICIU/AEI/10.13039/501100011033, grants PID2020-118485RB-I00 and CEX2023-001286-S, and through grant CNS2022-135887 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, Gobierno de Aragón project PROY_E28_24, FEDER (EU) and Fondo Social Europeo (DGA E15_20R and E47_20R). This research was also supported by CIBER – Consorcio Centro de Investigación Biomédica en Red – (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. M. F.M. acknowledges Gobierno de Aragón for a predoctoral fellowship (2023–2027). The authors would like to acknowledge the use of the Laboratorio de Microscopias Avanzadas and the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. C. S. S. acknowledges the FAB3D interdisciplinary platform (PTI-CSIC) for support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photochemically Induced Propulsion of a 4D Printed Liquid Crystal Elastomer Biomimetic Swimmer

  • Sartori, Paolo
  • Yadav, Rahul Singh
  • Barrio, Jesús del
  • DeSimone, Antonio
  • Sánchez-Somolinos, Carlos
Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape‐changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene‐containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate‐intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four‐lapped ephyra‐like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate‐intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light‐fueled robotic LCE free‐swimmers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Delayed crosslinking enables ultra-high-resolution melt electrowriting of responsive liquid crystal elastomers

  • Javadzadeh, Mehrzad
  • Fernández-Melero, María
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
Melt electrowriting (MEW) enables the fabrication of finely structured scaffolds with sub-micrometer resolution. However, reducing the inter-fiber distance (IFD) in MEW remains challenging due to electrostatic interactions between the charged polymer jet and previously deposited fibers, often leading to fiber bridging. Recently, we demonstrated that MEW of reactive liquid crystalline inks, followed by ultraviolet (UV) photopolymerization, enables the fabrication of digitally positioned liquid crystal elastomer (LCE) structures. Building on this, we demonstrate that tuning the UV light intensity during photopolymerization significantly improves the achievable resolution range. Lower UV intensities produce smaller minimum IFDs without fiber bridging, enabling the fabrication of highly ordered structures with IFDs down to 11 µm for 5 µm-diameter fibers, a feature that, to the best of our knowledge, surpasses the smallest IFDs previously reported for MEW. We hypothesize that slower crosslinking kinetics extend the time window for charge dissipation, reducing electrostatic interactions between the jet and the previously deposited fibers. Although the mechanism remains unclear, local variations in material flow or curing-induced surface morphology may also affect electric field distribution. Beyond resolution improvements, this strategy enables defect-free fabrication of stimuli-responsive LCEs with programmable shape transformation and actuation. UV light intensity thus emerges as a critical design parameter for MEW, with implications for other photo-crosslinkable systems.