Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Fully Recyclable Pluripotent Networks for 3D Printing Enabled by Dissociative Dynamic Bonds

  • Caliari, Marco
  • Vidal Peña, Fernando
  • Mantione, Daniele
  • Seychal, Guillem
  • Campoy Quiles, Mariano
  • Irusta Maritxalar, María Lourdes
  • Fernández San Martín, Mercedes
  • López de Pariza Sanz, Xabier
  • Habets, Thomas
  • Aramburu Ocáriz, Nora
  • Raquez, Jean-Marie
  • Grignard, Bruno
  • Müller Sánchez, Alejandro Jesús
  • Sardon Muguruza, Haritz
Additive manufacturing (AM) has risen in popularity due to its ability to produce complex shapes in a material-efficient way. However, to produce objects with advanced properties, complex multimaterial strategies are often employed. This one-polymer-one-property paradigm significantly slows down the application of AM, and in particular of fused deposition modeling (FDM), for manufacturing of functional objects. In this study advantage of pluripotency in materials is taken, i.e., the ability to attain different properties from a single stock, to afford mechanically tunable 3D printed dynamic thermosets (moduli from 2 MPa – 3 GPa, 1500× increase, Stress at break from 2 to 70 MPa, 35× increase). To do so, FDM-compatible CO2-derived dissociative polymer networks are designed that undergo a dynamic reaction-induced phase-separation (DRIPS). This strategy enables the control of the size of the rigid phase with a simple post-printing thermal treatment, cascading in spatially patterned mechanical properties. This study showcases new directions for the 3D printing communities, with deep implications in soft robotics and compliant mechanics., The authors would like to express thanks for the financial support provided by the NIPU-EJD project; this project has received funding from the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie Grant Agreement No. 955700. C.D. is FNRS Research Director and thanks FNRS for financial support in the frame of the CO2Switch project under grant T.0075.20. A.J.M. acknowledges the financial support from the Basque Government through grant IT1503-22. The authors acknowledge grant TED2021-129852B-C22 funded by MCIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and the grant PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. D.M. thanks Ayuda RYC2021-031668-I funded by MCIN/AEI/10.13039/501100011033 and by EU NextGenerationEU/PRTR.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Enhanced and Reusable Poly(hydroxy urethane)-Based Low Temperature Hot-Melt Adhesives

  • Gómez López, Álvaro
  • Ayensa Serrano, Naroa
  • Grignard, Bruno
  • Irusta Maritxalar, María Lourdes
  • Calvo, Iñigo
  • Müller Sánchez, Alejandro Jesús
  • Detrembleur, Christophe
  • Sardon Muguruza, Haritz
[EN] Poly(hydroxy urethane)s (PHUs) based on 5-membered cyclic carbonates have emerged as sustainable alternatives to conventional isocyanate-based polyurethanes. However, while from the point of view of sustainability they represent an improvement, their properties are still not competitive with conventional polyurethanes. In this work, the potential of PHUs as reversible hot-melt adhesives is discussed. We found that with a judicious choice of reagents (ie., the dicyclic carbonate and diamine), the detrimental hydrogen bonding between the soft segment of the chains and the pendant hydroxyl groups was partially avoided, thus imparting PHUs with hot-melt adhesion properties (i.e., adhesion at elevated temperatures and cohesiveness at a temperature lower than T-g/T-m). The importance of a balanced hard to soft segment ratio, along with the relevance of the chain extender in the final properties, is highlighted. Addition of aliphatic diamines (HMDA, 1,12-DAD) resulted in rubbery materials, while the employment of cydoaliphatic (CBMA) or aromatic ones (MXDA, PXDA) led to materials with hot-melt adhesive properties. The thermoreversibility of all compositions was assessed by rebonding specimens after lap-shear tests. Lap-shear strength values that were comparable to the virgin adhesives were observed. The breaking and reformation of hydrogen bonding interactions was demonstrated by FTIR measurements at different temperatures, as well as by rheological frequency sweep experiments. In order to mitigate the negative impact of the low molar mass PHUs and to enhance the service temperature of the adhesives, a hybrid PHU was prepared by adding a small amount of an epoxy resin, which acts as a cross-linker. These hybrid PHUs maintain the thermoreversibility displayed by thermoplastic PHUs while providing better adhesion at elevated temperatures. We believe that this work provides some important insights into the design of PHU-based hot-melt adhesives., The authors would like to acknowledge the technical and human support provided by SGIker (UPV/EHU and ERDF, EU). A.G.-L. acknowledges the University of the Basque Country for the predoctoral fellowship received to carry out this work. The authors would also like to acknowledge the technical support provided by Amaia Agirre for the GPC analysis. ORIBAY Group Automotive also wants to acknowledge the HAZITEK program for the final support of the project n degrees ZL-2019/00193. This project has been partly supported by the European Union's Horizon 2020 research and innovation program under Marie Sklodowska-Curie grant agreement No. 955700. C.D. thanks FNRS for financial support. The authors of Liege thank the "Fonds National pour la Recherche Scientifique" (F.R.S.-FNRS) and the Fonds Wetenschappelijk Onderzoek-Vlaanderen (FWO) for financial support in the frame of the EOS project n degrees O019618F (ID EOS: 30902231). C.D. is F.R.S.-FNRS Research Director.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-Free Design of Biobased Non-isocyanate Polyurethanes with Ferroelectric Properties

  • Sessini, Valentina
  • Thai, Cuong Nguyen
  • Amorín, Harvey
  • Jiménez, Ricardo
  • Samuel, Cédric
  • Caillol, Sylvain
  • Cornil, Jérôme
  • Hoyas, Sébastien
  • Barrau, Sophie
  • Dubois, Philippe
  • Leclère, Philippe
  • Raquez, Jean-Marie
[EN] Increasing energy autonomy and lowering dependence on lithium-based batteries are more and more appealing to meet our current and future needs of energy-demanding applications such as data acquisition, storage, and communication. In this respect, energy harvesting solutions from ambient sources represent a relevant solution by unravelling these challenges and giving access to an unlimited source of portable/renewable energy. Despite more than five decades of intensive study, most of these energy harvesting solutions are exclusively designed from ferroelectric ceramics such as Pb(Zr,Ti)O3 and/or ferroelectric polymers such as polyvinylidene fluoride and its related copolymers, but the large implementation of these piezoelectric materials into these technologies is environmentally problematic, related with elevated toxicity and poor recyclability. In this work, we reveal that fully biobased non-isocyanate polyurethane-based materials could afford a sustainable platform to produce piezoelectric materials of high interest. Interestingly, these non-isocyanate polyurethanes (NIPUs) with ferroelectric properties could be successfully synthesized using a solvent-free reactive extrusion process on the basis of an aminolysis reaction between resorcinol bis-carbonate and different diamine extension agents. Structure-property relationships were established, indicating that the ferroelectric behavior of these NIPUs depends on the nanophase separation inside these materials. These promising results indicate a significant potential for fulfilling the requirements of basic connected sensors equipped with low-power communication technologies., Spanish Ministerio de Economía y Competitividad (MINECO) forfinancial support through projects MAT2017-88788-R and MAT2016-76851-R. This project has received funding from European Union’s Horizon 2020 research and innovation programmeunder the Marie Skłodowska-Curie grant agreement no.955700.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully Recyclable Pluripotent Networks for 3D Printing Enabled by Dissociative Dynamic Bonds

  • Caliari, Marco
  • Vidal, Fernando
  • Mantione, Daniele
  • Seychal, Guillem
  • Campoy Quiles, Mariano
  • Irusta, Lourdes
  • Fernández, Mercedes
  • López de Pariza, Xabier
  • Habets, Thomas
  • Aramburu, Nora
  • Raquez, Jean-Marie
  • Grignard, Bruno
  • Müller, Alejandro J.
  • Detrembleur, Christophe
  • Sardon, Haritz
Additive manufacturing (AM) has risen in popularity due to its ability to produce complex shapes in a material-efficient way. However, to produce objects with advanced properties, complex multimaterial strategies are often employed. This one-polymer-one-property paradigm significantly slows down the application of AM, and in particular of fused deposition modeling (FDM), for manufacturing of functional objects. In this study advantage of pluripotency in materials is taken, i.e., the ability to attain different properties from a single stock, to afford mechanically tunable 3D printed dynamic thermosets (moduli from 2 MPa - 3 GPa, 1500× increase, Stress at break from 2 to 70 MPa, 35× increase). To do so, FDM-compatible CO2-derived dissociative polymer networks are designed that undergo a dynamic reaction-induced phase-separation (DRIPS). This strategy enables the control of the size of the rigid phase with a simple post-printing thermal treatment, cascading in spatially patterned mechanical properties. This study showcases new directions for the 3D printing communities, with deep implications in soft robotics and compliant mechanics., The authors would like to thank Prof. PhD Itziar Otaegi for their support in mechanical characterization and PhD Lucas Polo de Fonseca for the help in characterizing the phase behavior of the tandem materials. The authors thank for the technical and human support provided by SGIker (UPV/EHU/ ERDF, EU). The authors would like to express thanks for the financial support provided by the NIPU-EJD project; this project has received funding from the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie Grant Agreement No. 955700. C.D. is FNRS Research Director and thanks FNRS for financial support in the frame of the CO2Switch project under grant T.0075.20. A.J.M. acknowledges the financial support from the Basque Government through grant IT1503-22. The authors acknowledge grant TED2021-129852B-C22 funded by MCIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and the grant PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. D.M. thanks Ayuda RYC2021-031668-I funded by MCIN/AEI/10.13039/501100011033 and by EU NextGenerationEU/PRTR., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed