Pasar al contenido principal

FABRICACION AVANZADA DE RESINAS TOTALMENTE RECICLABLES MEDIANTE FOTOPOLIMERIZACION VAT

PID2022-138199NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully Recyclable Pluripotent Networks for 3D Printing Enabled by Dissociative Dynamic Bonds

  • Caliari, Marco
  • Vidal, Fernando
  • Mantione, Daniele
  • Seychal, Guillem
  • Campoy Quiles, Mariano
  • Irusta, Lourdes
  • Fernández, Mercedes
  • López de Pariza, Xabier
  • Habets, Thomas
  • Aramburu, Nora
  • Raquez, Jean-Marie
  • Grignard, Bruno
  • Müller, Alejandro J.
  • Detrembleur, Christophe
  • Sardon, Haritz
Additive manufacturing (AM) has risen in popularity due to its ability to produce complex shapes in a material-efficient way. However, to produce objects with advanced properties, complex multimaterial strategies are often employed. This one-polymer-one-property paradigm significantly slows down the application of AM, and in particular of fused deposition modeling (FDM), for manufacturing of functional objects. In this study advantage of pluripotency in materials is taken, i.e., the ability to attain different properties from a single stock, to afford mechanically tunable 3D printed dynamic thermosets (moduli from 2 MPa - 3 GPa, 1500× increase, Stress at break from 2 to 70 MPa, 35× increase). To do so, FDM-compatible CO2-derived dissociative polymer networks are designed that undergo a dynamic reaction-induced phase-separation (DRIPS). This strategy enables the control of the size of the rigid phase with a simple post-printing thermal treatment, cascading in spatially patterned mechanical properties. This study showcases new directions for the 3D printing communities, with deep implications in soft robotics and compliant mechanics., The authors would like to thank Prof. PhD Itziar Otaegi for their support in mechanical characterization and PhD Lucas Polo de Fonseca for the help in characterizing the phase behavior of the tandem materials. The authors thank for the technical and human support provided by SGIker (UPV/EHU/ ERDF, EU). The authors would like to express thanks for the financial support provided by the NIPU-EJD project; this project has received funding from the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie Grant Agreement No. 955700. C.D. is FNRS Research Director and thanks FNRS for financial support in the frame of the CO2Switch project under grant T.0075.20. A.J.M. acknowledges the financial support from the Basque Government through grant IT1503-22. The authors acknowledge grant TED2021-129852B-C22 funded by MCIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and the grant PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. D.M. thanks Ayuda RYC2021-031668-I funded by MCIN/AEI/10.13039/501100011033 and by EU NextGenerationEU/PRTR., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

4D-Printable Poly(Thio)urethane Photoresins With Reactive Oxygen Species Responsiveness and Anti-Inflammatory Functionality

  • Lopez de Pariza, Xabier
  • Arévalo-Lagos, Lolita
  • Breloy, Louise
  • Varela, Oihane
  • Larrañaga, Aitor
  • Cadavid-Vargas, Juan F.
  • Garagarza-Goienetxea, Olaia
  • Moya-Granados, Melissa
  • Bagnarello, Vanessa
  • Sardon, Haritz
  • Criado-González, Miryam
Stimuli-responsive polymers, particularly those sensitive to reactive oxygen and nitrogen species (RONS), are emerging as promising materials for 4D printing in regenerative medicine. Their ability to respond to oxidative stress makes them highly suitable for treating diseases like cancer, diabetes, spinal cord injury, etc., where RONS and inflammation contribute to severe tissue damage. Herein, we report the development of digital light processing (DLP) 3D printable poly(thio)urethane (PSU) thermosets through UV-light activated click-reaction between a thiol crosslinker, and difunctional aliphatic isocyanates based on polypropyleneglycol-di-isophorone diisocyanate (PPG-di-IPDI) or poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol)-di-isophorone diisocyanate (PluronicL35-di-IPDI), containing 50 wt.% of poly(ethylene glycol) (PEG), catalyzed by using a photobase generator system composed of a triazabicyclodecene tetraphenylborate salt (TBD·BPh<inf>4</inf>) and 2-isopropylthioxanthone (ITX). The PSU printed materials exhibit ROS-responsiveness, as they increase their hydrophilicity and flexibility in the presence of 1 mM H<inf>2</inf>O<inf>2</inf>. Finally, the cytotoxicity of PSU materials is evaluated in vitro with human fibroblasts (MRC-5) and murine microglia (BV-2). PSU materials containing 100 wt.% PPG in the network (PSU1) are non-cytotoxic, showing metabolic activities comparable to the control and good cell viability. In contrast, PEG-containing PSU materials, with 25 and 50 wt.% PEG (PSU2 and PSU3 respectively), exhibit reduced cell compatibility. In addition, PSU1 materials effectively reduce nitric oxide production and TNF-α levels in LPS-stimulated BV-2 cells up to basal levels, ≈ 1 µM nitrites and ≈ 4.8 pg mL<sup>−</sup><sup>1</sup> TNF-α. These findings pave the way for the development of 4D printable scaffolds with built-in anti-inflammatory properties for tissue engineering avoiding traditional radical mediated fabrication methods on DLP manufacturing., The authors acknowledge grant TED2021-129852B-C22 funded byMCIN/AEI/10.13039/501100011033 and by the European UnionNextGenerationEU/PRTR and the grant PID2022-138199NB-I00 funded by MCIN/AEI/10.13039/501100011033. The authors thank forthe technical and human support provided by SGIker (UPV/EHU/ERDF, EU). M.C-G. thanks Grant RYC2022-036380-I funded byMICIU/AEI /10.13039/501100011033 and FSE+ and the Emakikerprogram of POLYMAT (UPV/EHU). A.L. is thankful for funds fromthe Basque Government, Department of Education (IT-1766-22). A.L.also acknowledges support from the María de Maeztu ExcellenceUnit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamic by design: unlocking full relaxation in disulfide epoxy networks

  • Fanlo, Paula|||0000-0002-2072-0318
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Ochoteco, Olaia
  • Ximenis, Marta
  • Rekondo, Alaitz
  • Grande, Hans Jürgen
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Sardon, Haritz
  • Ruiz de Luzuriaga, Alaitz|||0000-0001-6319-0532
Aromatic disulfide-containing epoxy networks offer a promising approach to achieving sustainable materials due to their reparable, recyclable, and reprocessable properties. However, in all cases, an excess of hardener is required to achieve full reparability. In this study, a theoretical analysis demonstrates that when aromatic disulfide is incorporated into the amine hardener, the resulting epoxy vitrimer does not fully relax due to epoxy group homopolymerization, which leads to the formation of non-dynamic crosslinks. To overcome this limitation, an epoxy monomer containing disulfide bonds was synthesized. This monomer enables complete relaxation, as the homopolymerized epoxy system also contributes to the formation of dynamic crosslinks. Using this new monomer, epoxy vitrimers were prepared that can relax without requiring an excess of amine. However, these materials exhibit inferior properties compared to those prepared with an aromatic disulfide-based diamine. To enhance their properties, a non-dynamic epoxy was introduced into the formulation. Both experimental and computational results demonstrate that up to 32% of non-dynamic epoxy can be incorporated without compromising dynamic features such as repairability, reprocessability, and recyclability, making this system significantly more suitable for industrial implementation., HS and MX acknowledge PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. MX acknowledges the grant from the Gipuzkoa Fellows Programme (G75067454). O. Konuray and X. Fernández-Francos acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, and also by Generalitat de Catalunya (2021-SGR-00154). O. Konuray and X. Fernández-Francos also acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic by design: unlocking full relaxation in disulfide epoxy networks

  • Fanlo, Paula
  • Konuray, Ali Osman
  • Ochoteco, Olaia
  • Ximenis, Marta
  • Rekondo, Alaitz
  • Grande, Hans Jürgen
  • Fernández Francos, Xavier
  • Sardon, Haritz
  • Ruiz de Luzuriaga, Alaitz
Aromatic disulfide-containing epoxy networks offer a promising approach to achieving sustainable materials due to their reparable, recyclable, and reprocessable properties. However, in all cases, an excess of hardener is required to achieve full reparability. In this study, a theoretical analysis demonstrates that when aromatic disulfide is incorporated into the amine hardener, the resulting epoxy vitrimer does not fully relax due to epoxy group homopolymerization, which leads to the formation of non-dynamic crosslinks. To overcome this limitation, an epoxy monomer containing disulfide bonds was synthesized. This monomer enables complete relaxation, as the homopolymerized epoxy system also contributes to the formation of dynamic crosslinks. Using this new monomer, epoxy vitrimers were prepared that can relax without requiring an excess of amine. However, these materials exhibit inferior properties compared to those prepared with an aromatic disulfide-based diamine. To enhance their properties, a non-dynamic epoxy was introduced into the formulation. Both experimental and computational results demonstrate that up to 32% of non-dynamic epoxy can be incorporated without compromising dynamic features such as repairability, reprocessability, and recyclability, making this system significantly more suitable for industrial implementation., HS and MX acknowledge PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. MX acknowledges the grant from the Gipuzkoa Fellows Programme (G75067454). O. Konuray and X. Fernández-Francos acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, and also by Generalitat de Catalunya (2021-SGR-00154). O. Konuray and X. Fernández-Francos also acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)