Pasar al contenido principal

DISEÑO A MEDIDA DE REDES POLIMERICAS COVALENTES DINAMICAS OBTENIDAS MEDIANTE CURADO DUAL PARA APLICACIONES FUNCIONALES

PID2023-147128OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reprocessable disulfide-based vitrimers with adhesive properties

  • Moradi, Sasan|||0000-0002-3481-2889
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Valverde Bastidas, Javier Gonzalo
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
A family of disulfide (S–S) containing thiol–vinyl–epoxy dynamic networks are presented. The networks are obtained through a dual-curing mechanism wherein a photoinduced thiol–ene reaction at room temperature is followed by a thermally activated, tertiary amine catalyzed thiol–epoxy curing stage, enabling controlled network development. Cured materials show reprocessability thanks to heat-triggered disulfide bond exchange. The influence of catalyst structure on curing behavior, thermomechanical properties, stress relaxation, and this reprocessability is systematically investigated. These solvent-free materials with a unique ternary composition exhibit efficient network rearrangement and successful thermal reprocessing, demonstrating their potential as sustainable materials., The authors acknowledge funding by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). The authors thank Po.Int.Er S.R.L. for supplying the epoxy resin. The authors also thank Max Nadal for help with sample preparation. X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tunable dual-curing acrylic/epoxy systems for 3D printing with enhanced joint performance via carbon nanotubes

  • Escribá Flores, Armando Alfredo
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ferrando Piera, Francesc|||0000-0003-4450-2734
  • Fabregat Sanjuan, Albert|||0000-0002-2878-1369
This study presents a novel dual-curing strategy for low-viscosity, high-performance acrylic/epoxy systems, which enables precise control over the final density of the co-network structure and its thermo-mechanical properties. Unlike conventional acrylate/epoxy dual-curing systems, this new strategy incorporates a long chain extender (polyethylene glycol) covalently bonded within the epoxy network to specifically reduce the crosslinking density achieved in the second curing stage. This allows for fine-tuning of the material's mechanical properties, facilitating adjustments to the elastic modulus from 3 MPa to 2500 MPa and achieving maximum tensile strength values of 80 MPa, while maintaining a low viscosity of less than 35 mPa s, making it ideal for 3D printing vat photopolymerization applications. Additionally, the material exhibits good thermal stability and excellent printed components resolution, thereby opening a wide range of design options for achieving optimal configurations related to mechanical preferences and precise geometric accuracy. The work further includes an analysis of tensile strength in bonded joints, which is a crucial parameter in structural design, particularly for the fabrication of large parts through bonding. Moreover, the project proposes the incorporation of functionalized multi-walled carbon nanotubes (MWCNT-COOH) to enhance interfacial adhesion between phases., This work was funded by the Spanish Ministry of Science and Inno vation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21, PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 154). Armando Escribá acknowledges to the Martí Franqués fellowship program (2021PMF-BS-08). X. Fernández-Francos acknowledges the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reprocessable epoxy-acrylate 3D-printing resins with improved compatibility

  • Casado Gómez, Jaime
  • Faja, Alba
  • Moradi, Sasan|||0000-0002-3481-2889
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
In this work, a practical approach is described to prepare acrylate-epoxy photo-thermal (dual) curing DLP 3-D printing resins that are reprocessable through transesterification. By choosing to perform the thermal cure before or after the photocure, the intermediate, partially-cured material can be obtained in different conditions, offering great flexibility for processing. The polyacrylate and polyepoxide phases are compatibilized by methacrylate-functional carboxylic acids that are initially added to the liquid resin. By employing methacrylate precursors with different chain lengths in the preparation of these coupling agents (CA), the final materials are obtained either as elastomeric or glassy solids. The glass transition temperatures ranged from 5 °C up to 100 °C and Young's moduli ranged from 13 MPa up to 2 GPa. The dynamic behavior was dictated by the choice of the anhydride precursor such that CAs prepared using glutaric anhydride lead to stress relaxation which was an order of magnitude faster than formulations prepared with bulkier anhydrides such as hexahydro-4-methyl phthalic anhydride. The Arrhenius activation energy of relaxation were in the range 90–120 kJ/mol typical of beta-hydroxyester vitrimers. The hot-press reprocessed materials showed near-complete or virtually complete recovery of and . Malleability performance of the materials was either good or excellent., The authors acknowledge the funding sources disclosed below. The authors thank Po.Int.ErS.R.L. for supplying the epoxy resin. The authors also thank Armando Escribá Flores for his help with the DLP-3D print ing. X. Fernández-Francos and O. Konuray acknowledge the Serra- Húnter programme (Generalitat de Catalunya). Funding: this work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quantitative prediction of stress relaxation kinetics in dissociative covalent adaptable networks

  • Mangialetto, Jessica|||0000-0001-8592-2351
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Moradi, Sasan|||0000-0002-3481-2889
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Brancart, Joost
  • Van den Brande, Niko
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Assche, Guy van|||0000-0003-0452-6272
A kinetic-structural model was developed to quantitatively describe the stress relaxation behavior of covalent adaptable networks based on the reversible Diels–Alder chemistry. The model draws on the analogy between stress relaxation and network de-cross-linking, where residual stress is attributed to elastically active network strands. A recursive network analysis, based on the Macosko–Miller approach, is coupled with a model that incorporates the reversible Diels–Alder reaction kinetics, stress-induced bond activation, and the reduced efficiency of bond exchanges during late-stage relaxation. The model was validated using rheological data from two Diels–Alder-based networks, with cross-linking kinetics and equilibrium conversions used to predict initial stresses. The stress relaxation behavior, including characteristic times and shape parameters across varying temperatures and cross-link densities, was accurately predicted using only two temperature-independent parameters. Beyond predictive capabilities, the model enables the extraction of kinetic and thermodynamic parameters from experimental data, supporting its use in both direct simulation and inverse design. Thanks to its low computational cost, the framework facilitates rapid exploration of compositional and structural scenarios, aiding the design of application-specific materials. This approach offers a robust and efficient tool for bridging the gap between dynamic covalent chemistries and the development of functional materials and their advanced processing., The authors from Universitat Politecnica de Catalunya acknowledge funding provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033) through the R&D projects PID2020- 115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). X.F.-F. and O.K. acknowledge the Serra-Hunter ́ Programme (Generalitat de Catalunya). The authors from Vrije Universiteit Brussel acknowledge funding provided by Research Foundation� Flanders (FWO-Vlaanderen) for the junior postdoctoral fellowship (1203524N) of J.M. and the senior postdoctoral fellowship (12E1123N) of J.B. The authors would like to acknowledge Prof. Dr. Jan Vermant of the Soft Materials laboratory of ETH Zürich for his support in the rheological analysis of these materials., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamic by design: unlocking full relaxation in disulfide epoxy networks

  • Fanlo, Paula|||0000-0002-2072-0318
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Ochoteco, Olaia
  • Ximenis, Marta
  • Rekondo, Alaitz
  • Grande, Hans Jürgen
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Sardon, Haritz
  • Ruiz de Luzuriaga, Alaitz|||0000-0001-6319-0532
Aromatic disulfide-containing epoxy networks offer a promising approach to achieving sustainable materials due to their reparable, recyclable, and reprocessable properties. However, in all cases, an excess of hardener is required to achieve full reparability. In this study, a theoretical analysis demonstrates that when aromatic disulfide is incorporated into the amine hardener, the resulting epoxy vitrimer does not fully relax due to epoxy group homopolymerization, which leads to the formation of non-dynamic crosslinks. To overcome this limitation, an epoxy monomer containing disulfide bonds was synthesized. This monomer enables complete relaxation, as the homopolymerized epoxy system also contributes to the formation of dynamic crosslinks. Using this new monomer, epoxy vitrimers were prepared that can relax without requiring an excess of amine. However, these materials exhibit inferior properties compared to those prepared with an aromatic disulfide-based diamine. To enhance their properties, a non-dynamic epoxy was introduced into the formulation. Both experimental and computational results demonstrate that up to 32% of non-dynamic epoxy can be incorporated without compromising dynamic features such as repairability, reprocessability, and recyclability, making this system significantly more suitable for industrial implementation., HS and MX acknowledge PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. MX acknowledges the grant from the Gipuzkoa Fellows Programme (G75067454). O. Konuray and X. Fernández-Francos acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, and also by Generalitat de Catalunya (2021-SGR-00154). O. Konuray and X. Fernández-Francos also acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Complete relaxation of thiol-ene vitrimeric elastomers with drastically reduced dynamic content

  • Alzubi, Hani Khaled Mohammad|||0000-0002-2199-963X
  • Moradi, Sasan|||0000-0002-3481-2889
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
Establishing a balance between polymer flow for reprocessing and mechanical robustness at service temperatures presents a challenge in designing covalent adaptable networks (CANs). In this study, we present a series of thiol-ene vitrimeric materials whose dynamicity is based on disulfide and beta-hydroxyester bonds. Firstly, through a facile epoxy-acid reaction, either a disulfide-containing or disulfide-free allyl precursor was synthesized. Subsequently, the two allyls were mixed in varying proportions and cured by a trithiol crosslinker. A dithiol chain extender was also added into the formulation at varying proportions in order to modify the network architecture and thus regulate dynamicity. The resulting viscoelastic and vitrimeric behavior as influenced by the choice of monomer type and proportion was studied in depth. Results show that disulfide content of as low as 17 % is sufficient to impart full recyclability to these versatile materials. Our tests also revealed that the most significant factor for creep suppression is not the disulfide content but the network connectivity dictated by the average thiol functionality. The cured materials are easily recyclable by heating under pressure, yielding comparable mechanical and thermomechanical properties across several cycles., The authors acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 00154). O. Konuray and X. Fernández-Francos acknowledge the Serra- Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Thiol-isocyanate-epoxy covalent adaptable networks with versatile dual-curing processing and tunable stress relaxation

  • Moradi, Sasan|||0000-0002-3481-2889
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Telatin, Tommaso
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Flor López, Sílvia de la|||0000-0002-6851-1371
  • Ramis Juan, Xavier|||0000-0003-2550-7185
Dual-curing covalent adaptable networks (CANs) provide a powerful platform to tailor thermomechanical properties through controlled network architecture and dynamic bond exchange. In this work, a thiol-isocyanate-epoxy system is employed to construct networks via a sequential photo- and thermally activated curing strategy, enabling precise control over intermediate and final network structures. The resulting materials exhibit composition-dependent stress relaxation behavior governed by the interplay of transthiocarbamoylation and transesterification mechanisms. By systematically varying the stoichiometric ratios, the relative contribution of each dynamic process is tuned, providing insight into structure-dynamics relationships in dual-curing networks. A simplified structural model is evaluated against experimental stress relaxation data, demonstrating its ability to capture key trends while highlighting its limitations in systems involving multiple concurrent exchange mechanisms. This work establishes a framework for the design of dual-curing CANs with tunable relaxation behavior and reprocessing capabilities., This work is part of the R&D projects PID2023-147128OB-C21, PID2023-147128OB-C22, and TED2021-131102B-C22 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR, as well as by the Generalitat de Catalunya (2021-SGR-00154). Xavier Fernández-Francos and Osman Konuray acknowledge the Serra-Húnter program (Generalitat de Catalunya)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reprocessable disulfide-based vitrimers with adhesive properties

  • Moradi, Sasan
  • Konuray, Ali Osman
  • Valverde Bastidas, Javier Gonzalo
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
A family of disulfide (S–S) containing thiol–vinyl–epoxy dynamic networks are presented. The networks are obtained through a dual-curing mechanism wherein a photoinduced thiol–ene reaction at room temperature is followed by a thermally activated, tertiary amine catalyzed thiol–epoxy curing stage, enabling controlled network development. Cured materials show reprocessability thanks to heat-triggered disulfide bond exchange. The influence of catalyst structure on curing behavior, thermomechanical properties, stress relaxation, and this reprocessability is systematically investigated. These solvent-free materials with a unique ternary composition exhibit efficient network rearrangement and successful thermal reprocessing, demonstrating their potential as sustainable materials., The authors acknowledge funding by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). The authors thank Po.Int.Er S.R.L. for supplying the epoxy resin. The authors also thank Max Nadal for help with sample preparation. X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tunable dual-curing acrylic/epoxy systems for 3D printing with enhanced joint performance via carbon nanotubes

  • Escribá Flores, Armando Alfredo
  • Fernández Francos, Xavier
  • Ferrando Piera, Francesc
  • Fabregat Sanjuan, Albert
This study presents a novel dual-curing strategy for low-viscosity, high-performance acrylic/epoxy systems, which enables precise control over the final density of the co-network structure and its thermo-mechanical properties. Unlike conventional acrylate/epoxy dual-curing systems, this new strategy incorporates a long chain extender (polyethylene glycol) covalently bonded within the epoxy network to specifically reduce the crosslinking density achieved in the second curing stage. This allows for fine-tuning of the material's mechanical properties, facilitating adjustments to the elastic modulus from 3 MPa to 2500 MPa and achieving maximum tensile strength values of 80 MPa, while maintaining a low viscosity of less than 35 mPa s, making it ideal for 3D printing vat photopolymerization applications. Additionally, the material exhibits good thermal stability and excellent printed components resolution, thereby opening a wide range of design options for achieving optimal configurations related to mechanical preferences and precise geometric accuracy. The work further includes an analysis of tensile strength in bonded joints, which is a crucial parameter in structural design, particularly for the fabrication of large parts through bonding. Moreover, the project proposes the incorporation of functionalized multi-walled carbon nanotubes (MWCNT-COOH) to enhance interfacial adhesion between phases., This work was funded by the Spanish Ministry of Science and Inno vation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21, PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 154). Armando Escribá acknowledges to the Martí Franqués fellowship program (2021PMF-BS-08). X. Fernández-Francos acknowledges the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reprocessable epoxy-acrylate 3D-printing resins with improved compatibility

  • Casado Gómez, Jaime
  • Faja, Alba
  • Moradi, Sasan
  • Ramis Juan, Xavier
  • Konuray, Ali Osman
  • Fernández Francos, Xavier
In this work, a practical approach is described to prepare acrylate-epoxy photo-thermal (dual) curing DLP 3-D printing resins that are reprocessable through transesterification. By choosing to perform the thermal cure before or after the photocure, the intermediate, partially-cured material can be obtained in different conditions, offering great flexibility for processing. The polyacrylate and polyepoxide phases are compatibilized by methacrylate-functional carboxylic acids that are initially added to the liquid resin. By employing methacrylate precursors with different chain lengths in the preparation of these coupling agents (CA), the final materials are obtained either as elastomeric or glassy solids. The glass transition temperatures ranged from 5 °C up to 100 °C and Young's moduli ranged from 13 MPa up to 2 GPa. The dynamic behavior was dictated by the choice of the anhydride precursor such that CAs prepared using glutaric anhydride lead to stress relaxation which was an order of magnitude faster than formulations prepared with bulkier anhydrides such as hexahydro-4-methyl phthalic anhydride. The Arrhenius activation energy of relaxation were in the range 90–120 kJ/mol typical of beta-hydroxyester vitrimers. The hot-press reprocessed materials showed near-complete or virtually complete recovery of and . Malleability performance of the materials was either good or excellent., The authors acknowledge the funding sources disclosed below. The authors thank Po.Int.ErS.R.L. for supplying the epoxy resin. The authors also thank Armando Escribá Flores for his help with the DLP-3D print ing. X. Fernández-Francos and O. Konuray acknowledge the Serra- Húnter programme (Generalitat de Catalunya). Funding: this work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quantitative prediction of stress relaxation kinetics in dissociative covalent adaptable networks

  • Mangialetto, Jessica
  • Konuray, Ali Osman
  • Moradi, Sasan
  • Fernández Francos, Xavier
  • Brancart, Joost
  • Van den Brande, Niko
  • Ramis Juan, Xavier
  • Assche, Guy van
A kinetic-structural model was developed to quantitatively describe the stress relaxation behavior of covalent adaptable networks based on the reversible Diels–Alder chemistry. The model draws on the analogy between stress relaxation and network de-cross-linking, where residual stress is attributed to elastically active network strands. A recursive network analysis, based on the Macosko–Miller approach, is coupled with a model that incorporates the reversible Diels–Alder reaction kinetics, stress-induced bond activation, and the reduced efficiency of bond exchanges during late-stage relaxation. The model was validated using rheological data from two Diels–Alder-based networks, with cross-linking kinetics and equilibrium conversions used to predict initial stresses. The stress relaxation behavior, including characteristic times and shape parameters across varying temperatures and cross-link densities, was accurately predicted using only two temperature-independent parameters. Beyond predictive capabilities, the model enables the extraction of kinetic and thermodynamic parameters from experimental data, supporting its use in both direct simulation and inverse design. Thanks to its low computational cost, the framework facilitates rapid exploration of compositional and structural scenarios, aiding the design of application-specific materials. This approach offers a robust and efficient tool for bridging the gap between dynamic covalent chemistries and the development of functional materials and their advanced processing., The authors from Universitat Politecnica de Catalunya acknowledge funding provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033) through the R&D projects PID2020- 115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). X.F.-F. and O.K. acknowledge the Serra-Hunter ́ Programme (Generalitat de Catalunya). The authors from Vrije Universiteit Brussel acknowledge funding provided by Research Foundation� Flanders (FWO-Vlaanderen) for the junior postdoctoral fellowship (1203524N) of J.M. and the senior postdoctoral fellowship (12E1123N) of J.B. The authors would like to acknowledge Prof. Dr. Jan Vermant of the Soft Materials laboratory of ETH Zürich for his support in the rheological analysis of these materials., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic by design: unlocking full relaxation in disulfide epoxy networks

  • Fanlo, Paula
  • Konuray, Ali Osman
  • Ochoteco, Olaia
  • Ximenis, Marta
  • Rekondo, Alaitz
  • Grande, Hans Jürgen
  • Fernández Francos, Xavier
  • Sardon, Haritz
  • Ruiz de Luzuriaga, Alaitz
Aromatic disulfide-containing epoxy networks offer a promising approach to achieving sustainable materials due to their reparable, recyclable, and reprocessable properties. However, in all cases, an excess of hardener is required to achieve full reparability. In this study, a theoretical analysis demonstrates that when aromatic disulfide is incorporated into the amine hardener, the resulting epoxy vitrimer does not fully relax due to epoxy group homopolymerization, which leads to the formation of non-dynamic crosslinks. To overcome this limitation, an epoxy monomer containing disulfide bonds was synthesized. This monomer enables complete relaxation, as the homopolymerized epoxy system also contributes to the formation of dynamic crosslinks. Using this new monomer, epoxy vitrimers were prepared that can relax without requiring an excess of amine. However, these materials exhibit inferior properties compared to those prepared with an aromatic disulfide-based diamine. To enhance their properties, a non-dynamic epoxy was introduced into the formulation. Both experimental and computational results demonstrate that up to 32% of non-dynamic epoxy can be incorporated without compromising dynamic features such as repairability, reprocessability, and recyclability, making this system significantly more suitable for industrial implementation., HS and MX acknowledge PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. MX acknowledges the grant from the Gipuzkoa Fellows Programme (G75067454). O. Konuray and X. Fernández-Francos acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, and also by Generalitat de Catalunya (2021-SGR-00154). O. Konuray and X. Fernández-Francos also acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Complete relaxation of thiol-ene vitrimeric elastomers with drastically reduced dynamic content

  • Alzubi, Hani Khaled Mohammad
  • Moradi, Sasan
  • Konuray, Ali Osman
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
Establishing a balance between polymer flow for reprocessing and mechanical robustness at service temperatures presents a challenge in designing covalent adaptable networks (CANs). In this study, we present a series of thiol-ene vitrimeric materials whose dynamicity is based on disulfide and beta-hydroxyester bonds. Firstly, through a facile epoxy-acid reaction, either a disulfide-containing or disulfide-free allyl precursor was synthesized. Subsequently, the two allyls were mixed in varying proportions and cured by a trithiol crosslinker. A dithiol chain extender was also added into the formulation at varying proportions in order to modify the network architecture and thus regulate dynamicity. The resulting viscoelastic and vitrimeric behavior as influenced by the choice of monomer type and proportion was studied in depth. Results show that disulfide content of as low as 17 % is sufficient to impart full recyclability to these versatile materials. Our tests also revealed that the most significant factor for creep suppression is not the disulfide content but the network connectivity dictated by the average thiol functionality. The cured materials are easily recyclable by heating under pressure, yielding comparable mechanical and thermomechanical properties across several cycles., The authors acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 00154). O. Konuray and X. Fernández-Francos acknowledge the Serra- Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thiol-isocyanate-epoxy covalent adaptable networks with versatile dual-curing processing and tunable stress relaxation

  • Moradi, Sasan
  • Fernández Francos, Xavier
  • Telatin, Tommaso
  • Konuray, Ali Osman
  • Flor López, Sílvia de la
  • Ramis Juan, Xavier
Dual-curing covalent adaptable networks (CANs) provide a powerful platform to tailor thermomechanical properties through controlled network architecture and dynamic bond exchange. In this work, a thiol-isocyanate-epoxy system is employed to construct networks via a sequential photo- and thermally activated curing strategy, enabling precise control over intermediate and final network structures. The resulting materials exhibit composition-dependent stress relaxation behavior governed by the interplay of transthiocarbamoylation and transesterification mechanisms. By systematically varying the stoichiometric ratios, the relative contribution of each dynamic process is tuned, providing insight into structure-dynamics relationships in dual-curing networks. A simplified structural model is evaluated against experimental stress relaxation data, demonstrating its ability to capture key trends while highlighting its limitations in systems involving multiple concurrent exchange mechanisms. This work establishes a framework for the design of dual-curing CANs with tunable relaxation behavior and reprocessing capabilities., This work is part of the R&D projects PID2023-147128OB-C21, PID2023-147128OB-C22, and TED2021-131102B-C22 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR, as well as by the Generalitat de Catalunya (2021-SGR-00154). Xavier Fernández-Francos and Osman Konuray acknowledge the Serra-Húnter program (Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)