Pasar al contenido principal

PROCESADO DUAL DE VITRIMEROS: IMPRESION 3D

PID2020-115102RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dual-cured thermosets based on eugenol derivatives and thiol chemistry

  • Roig Gibert, Adriá
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • De la Flor López, Silvia
  • Serra Albet, Maria Àngels|||0000-0003-1387-0358
This paper aims to increase sustainability in thermosetting polymeric fields using bio-based monomers and environmentally friendly processing technologies based on dual-curing. Eugenol has been transformed into acrylate epoxy eugenol (AEEU) that can participate in thio-Michael additions and thiol-epoxy reactions. These reactions constitute the first and second steps of the sequential dual-curing process. A basic catalyst has been added to favor the kinetics of the curing process. We have selected three thiols with functionalities 3, 4, and 6, the first is derived from eugenol, and the others are derived from pentaerythritol, all can be obtained from renewable resources. To tailor and improve the intermediate material characteristics in the dual-curing process, we have added the triacrylate of glycerol. By changing its proportion, a liquid or a rubbery solid can be obtained as an intermediate, which allows a significant number of application technologies. Rheology, DSC, and FTIR were used to follow the evolution of both curing steps and to confirm the sequential character of the dual-curing. The thermal characteristics of intermediate and final materials have been evaluated by TGA and DMTA. Tensile tests at break were performed to evaluate the mechanical properties., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR. We acknowledge these grants, and we also thank the Generalitat de Catalunya (2021-SGR00154). Bruno Bock Thiochemicals is acknowledge for kindly giving us thiol monomers.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reprocessable disulfide-based vitrimers with adhesive properties

  • Moradi, Sasan|||0000-0002-3481-2889
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Valverde Bastidas, Javier Gonzalo
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
A family of disulfide (S–S) containing thiol–vinyl–epoxy dynamic networks are presented. The networks are obtained through a dual-curing mechanism wherein a photoinduced thiol–ene reaction at room temperature is followed by a thermally activated, tertiary amine catalyzed thiol–epoxy curing stage, enabling controlled network development. Cured materials show reprocessability thanks to heat-triggered disulfide bond exchange. The influence of catalyst structure on curing behavior, thermomechanical properties, stress relaxation, and this reprocessability is systematically investigated. These solvent-free materials with a unique ternary composition exhibit efficient network rearrangement and successful thermal reprocessing, demonstrating their potential as sustainable materials., The authors acknowledge funding by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). The authors thank Po.Int.Er S.R.L. for supplying the epoxy resin. The authors also thank Max Nadal for help with sample preparation. X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Eugenol-based dual-cured materials with multiple dynamic exchangeable bonds

  • Roig Gibert, Adriá
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • De la Flor López, Silvia
  • Serra Albet, Maria Àngels|||0000-0003-1387-0358
In the present work, the preparation of sustainable thermosets has been approached simultaneously from three different points of view: a) the use of bio-based monomers chemically modified through green methodologies, b) the adoption of dual curing through click-type reactions to implement more efficient manufacturing processes, and c) inclusion of interchangeable groups in the network, to enable the reuse and recycling of the material at the end of its useful life and avoid waste generation. The first goal has been approached by synthesizing in a greener way an acrylate-epoxy derivative of eugenol (AEEU) and a glycerol triacrylate (GTA), both biobased resources. Then, the second approach was addressed by using biobased cystamine as a crosslinker to obtain materials through a dual-curing procedure based on a first “click” aza-Michael reaction and a second “click” epoxy-amine reaction. Intermediate and final materials could be prepared with different tailorable properties by controlling the molar ratio of the AEEU and GTA. By using DSC and rheology, we could evaluate the sequentiality and the gelation of the curing process. Finally, the covalent adaptable networks (CANs) prepared contained three different types of dynamic bonds (disulfide, esters, and ß-aminoesters) and their thermomechanical properties were tested by DMA revealing Tgs above room temperature from 47 to 70 °C. Bending tests at break were performed to evaluate the mechanical properties reaching values up to 90 MPa of stress at break and 7 % of deformation. Stress relaxation tests showed that all materials could relax the stress at relatively low temperatures (120 °C) in less than 21 min. The associative and dissociative behavior of these materials was investigated through rheology revealing a clear drop of the modulus at high temperatures and frequencies when cystamine was used as a crosslinker. Moreover, their reprocessability was tested obtaining homogeneous samples with no significant changes in their chemical and thermal properties highlighting the great potential and wide range of possibilities in many different fields of these CANs., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/PRTR. We acknowledge these grants and we also thank to the Generalitat de Cat- alunya (2021-SGR-00154).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Critical analysis of the thermal stability of transesterification vitrimers for 3D-printing applications based on digital light processing

  • Romano, Angelo
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Román Concha, Frida Rosario|||0000-0001-7435-2402
  • Calventus Solé, Yolanda|||0000-0002-6216-5420
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Roppolo, Ignazio
  • Sangermano, Marco
3D-printable vitrimers processed by digital light processing (DLP) have been recently developed, based on the transesterification reaction of ß-hydroxyester structures from mono- and diacrylate monomers employed in the formulation. These materials show promising repairability and recyclability, in addition to other interesting features such as shape memory and shape reconfigurability. It has been reported that structural changes taking place due to transesterification promote network rearrangement and an enhancement of the thermomechanical properties. However, the elevated temperatures required for the network reconfiguration cast some doubts on their applicability in real-life scenarios. In this paper, we analyze the effect of the thermal treatment on the thermomechanical properties and relaxation behavior of these materials and discuss the underlying mechanism explaining the observed changes. We identify some critical issues related to use of a monoacrylate containing ß-hydroxyester moieties, and propose solutions to overcome the most relevant drawbacks., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI) through R&D project PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-154 and BASE3D). XF-F and OK acknowledge the Serra-Húnter program (Generalitat de Catalunya).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Recyclable dual-curing thiol-isocyanate-epoxy vitrimers with sequential relaxation profiles

  • Moradi, Sasan|||0000-0002-3481-2889
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Ramis Juan, Xavier|||0000-0003-2550-7185
Two series of poly(thiourethane)s-poly(thiol-epoxy) hybrids were prepared from dual-curing, stoichiometric thiol:isocyanate:epoxy mixtures. 1-methylimidazole (MI) was used as initiator for the thiol-isocyanate and thiol-epoxy curing reactions. A salt of tetraphenylborate derived from highly basic amine 1,5,7 triazabicyclo [4,4,0]dec-5-ene (TBD) was used as catalyst for the activation of bond exchange reactions. The curing kinetics and the glass transition temperature (Tg) of the samples were studied by differential scanning calorimetry (DSC). Thermal stability was characterized by thermogravimetric analysis (TGA). Stress relaxation dynamics related to the bond exchange reactions were studied by dynamic mechanical analysis (DMA). Recyclability of the fully cured samples according to the DMA results was carried out by hot-pressing at elevated temperatures. The results show that the curing process takes place in a controlled and sequential way: the thiol-isocyanate reaction takes place first, at moderate temperatures, followed by the thiol-epoxy reaction, which is completed at higher temperatures. The analysis of stress relaxation evidences a complex two-step relaxation behavior depending on the contribution of isocyanate and epoxy groups to the mixture. Isocyanate-rich materials show a simple relaxation process corresponding to the trans-thiocarbamoylation exchange reactions. Epoxy-rich materials show, in contrast, a two-step relaxation processes evidencing that trans-thiocarbamoylation alone may not be sufficient to relax the stress completely, due to an apparently permanent network structure. However, complete stress relaxation is possible for epoxy-rich materials through additional bond exchange reactions such as transesterification or dynamic thiol-Michael, but at a slower rate. Depending on the composition and the temperature, full recycling of the material can be achieved at moderate temperatures in a timescale of minutes to hours., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D project PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021- SGR-00154), Spain. X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tunable dual-curing acrylic/epoxy systems for 3D printing with enhanced joint performance via carbon nanotubes

  • Escribá Flores, Armando Alfredo
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ferrando Piera, Francesc|||0000-0003-4450-2734
  • Fabregat Sanjuan, Albert|||0000-0002-2878-1369
This study presents a novel dual-curing strategy for low-viscosity, high-performance acrylic/epoxy systems, which enables precise control over the final density of the co-network structure and its thermo-mechanical properties. Unlike conventional acrylate/epoxy dual-curing systems, this new strategy incorporates a long chain extender (polyethylene glycol) covalently bonded within the epoxy network to specifically reduce the crosslinking density achieved in the second curing stage. This allows for fine-tuning of the material's mechanical properties, facilitating adjustments to the elastic modulus from 3 MPa to 2500 MPa and achieving maximum tensile strength values of 80 MPa, while maintaining a low viscosity of less than 35 mPa s, making it ideal for 3D printing vat photopolymerization applications. Additionally, the material exhibits good thermal stability and excellent printed components resolution, thereby opening a wide range of design options for achieving optimal configurations related to mechanical preferences and precise geometric accuracy. The work further includes an analysis of tensile strength in bonded joints, which is a crucial parameter in structural design, particularly for the fabrication of large parts through bonding. Moreover, the project proposes the incorporation of functionalized multi-walled carbon nanotubes (MWCNT-COOH) to enhance interfacial adhesion between phases., This work was funded by the Spanish Ministry of Science and Inno vation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21, PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 154). Armando Escribá acknowledges to the Martí Franqués fellowship program (2021PMF-BS-08). X. Fernández-Francos acknowledges the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reprocessable epoxy-acrylate 3D-printing resins with improved compatibility

  • Casado Gómez, Jaime
  • Faja, Alba
  • Moradi, Sasan|||0000-0002-3481-2889
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
In this work, a practical approach is described to prepare acrylate-epoxy photo-thermal (dual) curing DLP 3-D printing resins that are reprocessable through transesterification. By choosing to perform the thermal cure before or after the photocure, the intermediate, partially-cured material can be obtained in different conditions, offering great flexibility for processing. The polyacrylate and polyepoxide phases are compatibilized by methacrylate-functional carboxylic acids that are initially added to the liquid resin. By employing methacrylate precursors with different chain lengths in the preparation of these coupling agents (CA), the final materials are obtained either as elastomeric or glassy solids. The glass transition temperatures ranged from 5 °C up to 100 °C and Young's moduli ranged from 13 MPa up to 2 GPa. The dynamic behavior was dictated by the choice of the anhydride precursor such that CAs prepared using glutaric anhydride lead to stress relaxation which was an order of magnitude faster than formulations prepared with bulkier anhydrides such as hexahydro-4-methyl phthalic anhydride. The Arrhenius activation energy of relaxation were in the range 90–120 kJ/mol typical of beta-hydroxyester vitrimers. The hot-press reprocessed materials showed near-complete or virtually complete recovery of and . Malleability performance of the materials was either good or excellent., The authors acknowledge the funding sources disclosed below. The authors thank Po.Int.ErS.R.L. for supplying the epoxy resin. The authors also thank Armando Escribá Flores for his help with the DLP-3D print ing. X. Fernández-Francos and O. Konuray acknowledge the Serra- Húnter programme (Generalitat de Catalunya). Funding: this work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Biobased imine vitrimers obtained by photo and thermal curing procedures-promising materials for 3D printing

  • Vilanova Pérez, Anna
  • De la Flor López, Silvia
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Serra Albet, Maria Àngels|||0000-0003-1387-0358
  • Roig Gibert, Adriá
Imine-based vitrimers were prepared from synthesized diimine-dimethacrylate monomer derived from biobased vanillin. First, a methacrylate derivative starting from vanillin was synthesized. The diimine derivative was synthesized by condensation of the aldehyde groups from two vanillin methacrylate units with the amine groups of hexamethylenediamine (HMDA). The synthesized product was used in formulations containing ethylene glycol phenyl ether methacrylate (EGPMA) as a reactive diluent for the customization of final material properties and cured by exposure to ultraviolet (UV)-light using suitable radical photoinitiators or else with temperature using a radical thermal initiator. Materials with glass transition temperatures (Tgs) ranging from 70 to 90 °C were prepared, showing good thermal stability and mechanical and thermomechanical properties. The evaluation of their vitrimeric characteristics revealed that all materials achieved a stress-relaxation factor (s = 0.37s0) in less than 130 s at 160 °C, with photocured materials exhibiting faster relaxation rates. The catalytic effect of phosphine oxide groups in imine metathesis has also been evidenced. All prepared materials could be mechanically recycled and completely solubilized in a two-step degradation process, putting evidence of their potential use for carbon fiber-reinforced composites (CFRCs). In addition, they demonstrated promising self-repairing abilities. Finally, as a proof of concept, it was established that these formulations could be effectively processed using a Digital Light Processing three-dimensional (3D) Printer (DLP), resulting in the fabrication of complex shapes with high resolution., This work is part of the R&D projects PID2020-115102RB- C21, PID2020-115102RB-C22, and TED2021-131102B−C22 funded by MCNI/AEI/10.13039/501100011033 and Euro- pean Union “NextGenerationEU”/PRTR. The authors ac- knowledge these grants and also thank the Generalitat de Catalunya (2021-SGR-00154).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quantitative prediction of stress relaxation kinetics in dissociative covalent adaptable networks

  • Mangialetto, Jessica|||0000-0001-8592-2351
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Moradi, Sasan|||0000-0002-3481-2889
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Brancart, Joost
  • Van den Brande, Niko
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Assche, Guy van|||0000-0003-0452-6272
A kinetic-structural model was developed to quantitatively describe the stress relaxation behavior of covalent adaptable networks based on the reversible Diels–Alder chemistry. The model draws on the analogy between stress relaxation and network de-cross-linking, where residual stress is attributed to elastically active network strands. A recursive network analysis, based on the Macosko–Miller approach, is coupled with a model that incorporates the reversible Diels–Alder reaction kinetics, stress-induced bond activation, and the reduced efficiency of bond exchanges during late-stage relaxation. The model was validated using rheological data from two Diels–Alder-based networks, with cross-linking kinetics and equilibrium conversions used to predict initial stresses. The stress relaxation behavior, including characteristic times and shape parameters across varying temperatures and cross-link densities, was accurately predicted using only two temperature-independent parameters. Beyond predictive capabilities, the model enables the extraction of kinetic and thermodynamic parameters from experimental data, supporting its use in both direct simulation and inverse design. Thanks to its low computational cost, the framework facilitates rapid exploration of compositional and structural scenarios, aiding the design of application-specific materials. This approach offers a robust and efficient tool for bridging the gap between dynamic covalent chemistries and the development of functional materials and their advanced processing., The authors from Universitat Politecnica de Catalunya acknowledge funding provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033) through the R&D projects PID2020- 115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). X.F.-F. and O.K. acknowledge the Serra-Hunter ́ Programme (Generalitat de Catalunya). The authors from Vrije Universiteit Brussel acknowledge funding provided by Research Foundation� Flanders (FWO-Vlaanderen) for the junior postdoctoral fellowship (1203524N) of J.M. and the senior postdoctoral fellowship (12E1123N) of J.B. The authors would like to acknowledge Prof. Dr. Jan Vermant of the Soft Materials laboratory of ETH Zürich for his support in the rheological analysis of these materials., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Structural design of CANs with fine-tunable relaxation properties: a theoretical framework based on network structure and kinetics modeling

  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
In this work, we present a model capable of reproducing the stress relaxation dynamics of a wide range of relaxation processes in covalent adaptable networks (CANs) produced by stepwise polymerization. The proposed model captures the effective elastic response of the material subject to an initial stress by analogy with a network decrosslinking process. The combination of a recursive structural model and a kinetic model for the bond exchange reaction makes it possible to predict the expected stress relaxation profile in simple and complex systems depending on the structure of the network, the rate of bond exchange of the different components, and the presence of permanent bonds. After the basic features of the model are analyzed, its prediction capabilities are validated by simulating a number of scenarios taken from the literature. The results show that tailoring of the network architecture enables unprecedented flexibility in the design of CAN-based materials., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D project PID2020-115102RB-C22 and also by Generalitat de Catalunya (2017-SGR-77). X. Fernández-Francos and O. Konuray acknowledge the Serra-Hunter ́ programme (Generalitat de Catalunya).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Preparation of poly(thiourethane) networks by using a novel acidic organocatalyst. Evaluation of their vitrimer-like behavior

  • Guerrero Ruiz, Federico
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Flor López, Sílvia de la|||0000-0002-6851-1371
  • Serra Albet, Maria Àngels|||0000-0003-1387-0358
In this work, a novel acidic catalyst, isopropyl methane sulfonate, has been tested for the preparation of a series of poly(thiourethane) thermosets (PTU)s. The advantage of this compound is that in addition to being free of metals, by heating at temperatures above 100 °C, it releases methane sulfonic acid, which is the true catalyst allowing to maintain the formulation liquid at room temperature for a longer time than when using the more common dibutyltin dilaurate (DBTDL) catalyst. The materials obtained were characterized by thermogravimetry and thermomechanical analysis, which allow determining higher initial degradation temperatures than using tetraphenyl borate amidinium salts as basic organic catalysts. The PTUs prepared with this catalyst show good vitrimeric-like characteristics, with faster relaxation on increasing the amount of catalyst. The materials could be recycled without losing their chemical structure and mechanical performance., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/ 10.13039/ 501100011033. We acknowledge these grants and to the Generalitat de Catalunya (2017-SGR-77 and BASE3D). F.G. thanks to MCNI/AEI for the grant PRE2018-084192.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Easily recycled thiol-ene elastomers with controlled creep

  • Alzubi, Hani Khaled Mohammad|||0000-0002-2199-963X
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Moradi, Sasan|||0000-0002-3481-2889
Starting from in-house synthesized allylic monomers containing dynamic disulfide (S–S) bonds, a set of vitrimeric thiol-ene elastomers were prepared and characterized with respect to their viscoelastic and tensile properties. A mixture of a disulfide-containing diallyl monomer and disulfide-free diallyl, namely diallyl phthalate, was combined stoichiometrically with a thiol crosslinker, trimethylolpropane tris (3-mercaptopropionate), to obtain soft thiol-ene thermosets with varying degrees of dynamic bond content. The materials were able to relax strain induced stress completely and rapidly at moderately high temperatures when the disulfide content was above a certain threshold, which was accurately predicted by a statistically-based network (de)crosslinking model. Relaxation of materials with disulfide content below this threshold required the activation of an additional transesterification bond exchange process by increasing the temperature. Recycling of the materials could be achieved by hot-press molding at convenient temperatures. Especially in low-disulfide containing materials, changes were observed in the material structure and properties with increasing number of reprocessing cycles. However, a significant reduction in ambient temperature creep was observed upon reducing the disulfide content. The disulfide content can be easily optimized to yield minimal loss of mechanical property and minimal creep. This work opens up new avenues for the cost-effective development of vitrimeric elastomers with minimal ambient temperature creep., The authors acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCNI/AEI) through R&D project PID2020- 115102RB-C22, and also by Generalitat de Catalunya (2021-SGR- 00154). O. Konuray and X. Fernández-Francos acknowledge the Serra- Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamic by design: unlocking full relaxation in disulfide epoxy networks

  • Fanlo, Paula|||0000-0002-2072-0318
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Ochoteco, Olaia
  • Ximenis, Marta
  • Rekondo, Alaitz
  • Grande, Hans Jürgen
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Sardon, Haritz
  • Ruiz de Luzuriaga, Alaitz|||0000-0001-6319-0532
Aromatic disulfide-containing epoxy networks offer a promising approach to achieving sustainable materials due to their reparable, recyclable, and reprocessable properties. However, in all cases, an excess of hardener is required to achieve full reparability. In this study, a theoretical analysis demonstrates that when aromatic disulfide is incorporated into the amine hardener, the resulting epoxy vitrimer does not fully relax due to epoxy group homopolymerization, which leads to the formation of non-dynamic crosslinks. To overcome this limitation, an epoxy monomer containing disulfide bonds was synthesized. This monomer enables complete relaxation, as the homopolymerized epoxy system also contributes to the formation of dynamic crosslinks. Using this new monomer, epoxy vitrimers were prepared that can relax without requiring an excess of amine. However, these materials exhibit inferior properties compared to those prepared with an aromatic disulfide-based diamine. To enhance their properties, a non-dynamic epoxy was introduced into the formulation. Both experimental and computational results demonstrate that up to 32% of non-dynamic epoxy can be incorporated without compromising dynamic features such as repairability, reprocessability, and recyclability, making this system significantly more suitable for industrial implementation., HS and MX acknowledge PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. MX acknowledges the grant from the Gipuzkoa Fellows Programme (G75067454). O. Konuray and X. Fernández-Francos acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, and also by Generalitat de Catalunya (2021-SGR-00154). O. Konuray and X. Fernández-Francos also acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The use of lanthanide triflates in the preparation of poly(thiourethane) covalent adaptable networks

  • Guerrero Ruiz, Federico
  • Gamardella, Francesco
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • De la Flor López, Silvia
  • Serra Albet, Maria Àngels|||0000-0003-1387-0358
Covalent adaptable networks (CANs) are new polymeric materials with the mechanical properties of thermosets and the possibility of being recycled like thermoplastics. Poly(thiourethane) networks have demonstrated vitrimeric-like behavior at high temperatures due to the trans-thiocarbamoylation process, which Lewis acids and bases can accelerate. In this study, we report the use of lanthanide triflates (La, Sm, Dy, Er, and Yb) as Lewis acid catalysts, a greener alternative to other metallic catalysts as dibutyltin dilaurate (DBTDL) widely used in poly (urethane) and poly(thiourethane) networks. Moreover, they are not as reactive as DBTDL, and the curing mixture can be manipulated for a longer time at room temperature. As monomers, trimethylolpropane tris(3- mercapto propionate) (S3), hexamethylene diisocyanate (HDI), and isophorone diisocyanate (IPDI) have been used. We have demonstrated that the materials prepared with lanthanum triflate present the lowest relaxation times than those prepared with other lanthanide triflates or DBTDL. Calorimetry (DSC) and infrared spectroscopy (FTIR) were applied to study the curing process. The materials obtained were fully characterized by thermog- ravimetric analysis (TGA) and thermomechanical tests (DMA)., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/10.13039/ 501100011033. We acknowledge these grants and to the Generalitat de Catalunya (2021-SGR-00154 and BASE3D). F.G. thanks to MCNI/AEI for the grant PRE2018-084192.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Complete relaxation of thiol-ene vitrimeric elastomers with drastically reduced dynamic content

  • Alzubi, Hani Khaled Mohammad|||0000-0002-2199-963X
  • Moradi, Sasan|||0000-0002-3481-2889
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
Establishing a balance between polymer flow for reprocessing and mechanical robustness at service temperatures presents a challenge in designing covalent adaptable networks (CANs). In this study, we present a series of thiol-ene vitrimeric materials whose dynamicity is based on disulfide and beta-hydroxyester bonds. Firstly, through a facile epoxy-acid reaction, either a disulfide-containing or disulfide-free allyl precursor was synthesized. Subsequently, the two allyls were mixed in varying proportions and cured by a trithiol crosslinker. A dithiol chain extender was also added into the formulation at varying proportions in order to modify the network architecture and thus regulate dynamicity. The resulting viscoelastic and vitrimeric behavior as influenced by the choice of monomer type and proportion was studied in depth. Results show that disulfide content of as low as 17 % is sufficient to impart full recyclability to these versatile materials. Our tests also revealed that the most significant factor for creep suppression is not the disulfide content but the network connectivity dictated by the average thiol functionality. The cured materials are easily recyclable by heating under pressure, yielding comparable mechanical and thermomechanical properties across several cycles., The authors acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 00154). O. Konuray and X. Fernández-Francos acknowledge the Serra- Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Harnessing disulfide and transesterification bond exchange reactions for recyclable and reprocessable 3D-printed vitrimers

  • Vilanova Pérez, Anna
  • Moradi, Sasan|||0000-0002-3481-2889
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Ramis Juan, Xavier|||0000-0003-2550-7185
  • Roig Gibert, Adriá
  • Fernández Francos, Xavier|||0000-0002-3492-2922
Two new vitrimeric materials have been studied for potential additive manufacturing applications such as 3D- printing. A monomer containing disulfide bonds and ß-hydroxyesters was easily synthesized from two low- cost and commercially available reagents. Another disulfide-containing monomer was synthesized for compar- ison purposes. Materials were prepared through a UV-light radical polymerization of methacrylates. The addition of two reactive diluents such as poly(ethylene glycol) methyl ether methacrylate (PEGMA) and ethylene glycol phenyl ether methacrylate (EGPMA) was necessary to achieve a suitable viscosity for the curing as well as for their printability. The curing process was controlled by FTIR. Thermomechanical properties were investigated by means of DMTA analysis revealing near-ambient Tg values. Stress relaxation tests revealed that both materials were capable to relax the 63% of the initial stress in less than 10 min at 110 ¿C. The recyclability of the materials was achieved, and the mechanical and thermomechanical properties of the recycled samples were compared to the virgin ones revealing a great recovery of the initial properties. Finally, Digital Light Processing (DLP) technique was used to print complex structures with high resolution highlighting the great potential of these vitrimeric materials in 3D printing., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-00154 and BASE3D). X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of the non-ideal crosslinking process in thiol-X “click” thermosets

  • Belmonte Parra, Alberto|||0000-0002-0172-7557
  • De la Flor López, Silvia
  • Konuray, Ali Osman|||0000-0001-7281-006X
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ramis Juan, Xavier|||0000-0003-2550-7185
Thiol-click reactions are widely used in the preparation of thermosets. The network build-up process follows step-wise polymerization behavior, which is commonly analyzed assuming ideal step-wise behavior using well- known expressions such as the Flory-Stockmayer equation for the prediction of the gel point conversion. However, a number of factors contributing to departures from the expected ideal behavior can be identified: a) impurity of the reagents, b) complexity of the reaction mechanism and c) internal cyclization processes. In order to maximize the accuracy of predictions about the expected crosslinking behavior and therefore fine-tune the design of thermosets designed as dual-curing systems or covalent adaptable networks (CANs), it is necessary to take into consideration all these sources of non-ideality. In this work, we aim to describe the effects of such factors on the network build-up process of thiol-click thermosets, making use of the recursive methodology of Miller and Macosko. The contribution of each factor is analyzed separately and their overall combined effect is discussed in relation with real data reported in the literature and experimental results., This work was funded by the Spanish Ministry of Science and Inno- vation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-154). X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of the effect of coupling agent on the kinetic and mechanical properties of a 3D printable dual curing epoxy/acrylate system

  • Escribá Flores, Armando Alfredo
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Ferrando Piera, Francesc|||0000-0003-4450-2734
  • Fabregat Sanjuan, Albert|||0000-0002-2878-1369
In recent years, the use of vat photopolymerization in additive manufacturing technology has created a prominent potential in the world manufacturing industry due to its adaptability and quick production capabilities. However, a challenge faced by this technology is creating large-sized parts and ensuring the geometric versatility of processed parts. The physical and mechanical properties of existing materials limit their processing, affecting their final applications. Moreover, dual-curing systems allow new possibilities to 3D printing if shape geometry is changed after the first curing stage and fixed in the second curing stage. This study aims to address these challenges by developing a dual-curing system involving epoxy/acrylic resins. We assess the kinetic and mechanical behavior, focusing on variations in the network coupling agent. The initial curing stage of a low viscous formulation, achieved through processing on a DLP 3D printer (partially cured), produces a flexible material allowing deformations up to 160 %. The second curing stage, achieved through thermal treatment, transforms the material into a rigid system with an impressive maximum tensile strength close to 80 MPa. We compare the contribution of the bonding agent in partial and total cured states. Comprehensive mechanical tests have been performed, including tension and shear evaluations. Results have been favorably aligned with relevant literature. The dual-curing approach shows promise in expanding 3D printing vat photopolymerization applications, providing new design and manufacturing possibilities by enhancing material availability. Our findings emphasize the benefits of the dual-curing system, including low viscosity, shape manipulation during intermediate curing that allows complex geometries with fast procedures and without the need of supports and exceptional strength and durability achieved in the final curing phase. Results on mechanical characterization in joints show that dual curing resins could be attractive in applications where different parts must be joined and precise alignment and structural integrity are crucial. The main reason for that is the interaction with the bonding agent in each state of the dual curing., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-154). Armando Escribá acknowledges the Martí Franquès Research Fellowship Programme (2021PMFBS- 08). X. Fernández-Francos acknowledges the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Electro-responsive shape-memory composites obtained via dual-curing processing

  • Russo, Claudio
  • Ramirez Falo, José Luis
  • Fernández Francos, Xavier|||0000-0002-3492-2922
  • Flor López, Sílvia de la|||0000-0002-6851-1371
In this work, electro-responsive shape-memory actuators were developed by incorporating a conductive heater in a dual-curing thiol-acrylate-epoxy shape-memory polymer (SMP). A conductive heater, consisting of an electrically conductive silverink track printed on Kapton® substrate, was assembled to the SMP, taking advantage of the dual-curing processing. The shape-memory effect (SME) was activated by the heat dissipated by the Joule effect in the conductive track. Boron nitride agglomerates were dispersed in the thiol-acrylate-epoxy layers to increase thermal conductivity and achieve faster shape-recovery. A thermoelectric control unit was developed to control the shape recovery of the electro-responsive actuators and provide different activation strategies. The electrically activated SME was investigated and compared to a traditional SME based on an external heating source given by the dynamic mechanical analyzer (DMA) apparatus. Electro-responsive actuators were found extremely faster than the conventional SMPs based on external heating. The fastest recovery was obtained by the 15% boron nitride actuator, which recovered the 100% of the original shape in only 8 s. The thermoelectric controlling device provided an optimal control of the shape recovery speed based on the pulse width modulation of the heating current under the application of a low voltage (5 V)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biobased imine vitrimers obtained by photo and thermal curing procedures-promising materials for 3D printing

  • Vilanova Pérez, Anna
  • De la Flor López, Silvia
  • Fernández Francos, Xavier
  • Serra Albet, Maria Àngels
  • Roig Gibert, Adriá
Imine-based vitrimers were prepared from synthesized diimine-dimethacrylate monomer derived from biobased vanillin. First, a methacrylate derivative starting from vanillin was synthesized. The diimine derivative was synthesized by condensation of the aldehyde groups from two vanillin methacrylate units with the amine groups of hexamethylenediamine (HMDA). The synthesized product was used in formulations containing ethylene glycol phenyl ether methacrylate (EGPMA) as a reactive diluent for the customization of final material properties and cured by exposure to ultraviolet (UV)-light using suitable radical photoinitiators or else with temperature using a radical thermal initiator. Materials with glass transition temperatures (Tgs) ranging from 70 to 90 °C were prepared, showing good thermal stability and mechanical and thermomechanical properties. The evaluation of their vitrimeric characteristics revealed that all materials achieved a stress-relaxation factor (s = 0.37s0) in less than 130 s at 160 °C, with photocured materials exhibiting faster relaxation rates. The catalytic effect of phosphine oxide groups in imine metathesis has also been evidenced. All prepared materials could be mechanically recycled and completely solubilized in a two-step degradation process, putting evidence of their potential use for carbon fiber-reinforced composites (CFRCs). In addition, they demonstrated promising self-repairing abilities. Finally, as a proof of concept, it was established that these formulations could be effectively processed using a Digital Light Processing three-dimensional (3D) Printer (DLP), resulting in the fabrication of complex shapes with high resolution., This work is part of the R&D projects PID2020-115102RB- C21, PID2020-115102RB-C22, and TED2021-131102B−C22 funded by MCNI/AEI/10.13039/501100011033 and Euro- pean Union “NextGenerationEU”/PRTR. The authors ac- knowledge these grants and also thank the Generalitat de Catalunya (2021-SGR-00154)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reprocessable disulfide-based vitrimers with adhesive properties

  • Moradi, Sasan
  • Konuray, Ali Osman
  • Valverde Bastidas, Javier Gonzalo
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
A family of disulfide (S–S) containing thiol–vinyl–epoxy dynamic networks are presented. The networks are obtained through a dual-curing mechanism wherein a photoinduced thiol–ene reaction at room temperature is followed by a thermally activated, tertiary amine catalyzed thiol–epoxy curing stage, enabling controlled network development. Cured materials show reprocessability thanks to heat-triggered disulfide bond exchange. The influence of catalyst structure on curing behavior, thermomechanical properties, stress relaxation, and this reprocessability is systematically investigated. These solvent-free materials with a unique ternary composition exhibit efficient network rearrangement and successful thermal reprocessing, demonstrating their potential as sustainable materials., The authors acknowledge funding by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). The authors thank Po.Int.Er S.R.L. for supplying the epoxy resin. The authors also thank Max Nadal for help with sample preparation. X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tunable dual-curing acrylic/epoxy systems for 3D printing with enhanced joint performance via carbon nanotubes

  • Escribá Flores, Armando Alfredo
  • Fernández Francos, Xavier
  • Ferrando Piera, Francesc
  • Fabregat Sanjuan, Albert
This study presents a novel dual-curing strategy for low-viscosity, high-performance acrylic/epoxy systems, which enables precise control over the final density of the co-network structure and its thermo-mechanical properties. Unlike conventional acrylate/epoxy dual-curing systems, this new strategy incorporates a long chain extender (polyethylene glycol) covalently bonded within the epoxy network to specifically reduce the crosslinking density achieved in the second curing stage. This allows for fine-tuning of the material's mechanical properties, facilitating adjustments to the elastic modulus from 3 MPa to 2500 MPa and achieving maximum tensile strength values of 80 MPa, while maintaining a low viscosity of less than 35 mPa s, making it ideal for 3D printing vat photopolymerization applications. Additionally, the material exhibits good thermal stability and excellent printed components resolution, thereby opening a wide range of design options for achieving optimal configurations related to mechanical preferences and precise geometric accuracy. The work further includes an analysis of tensile strength in bonded joints, which is a crucial parameter in structural design, particularly for the fabrication of large parts through bonding. Moreover, the project proposes the incorporation of functionalized multi-walled carbon nanotubes (MWCNT-COOH) to enhance interfacial adhesion between phases., This work was funded by the Spanish Ministry of Science and Inno vation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21, PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 154). Armando Escribá acknowledges to the Martí Franqués fellowship program (2021PMF-BS-08). X. Fernández-Francos acknowledges the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Synthesis and characterization of new fully bio-based poly(acylhydrazone) vanillin vitrimers

  • Roig, Adrià
  • Petrauskaité, Aina
  • Flor López, Sílvia de la
  • Ramis Juan, Xavier
  • Serra Albet, Maria Àngels
In the present century the need to recycle thermosets to reach a sustainable environment has led a huge number of researchers to develop new reshapable networked polymers. In this scenario, vitrimers, materials able to change their topology via exchange of the covalent bonds, usually activated by thermal stimulus, are attracting growing interest. They can potentially be reshaped, self-welded, repaired and recycled at high temperature without appreciable degradation [1]. These materials behave as thermosets at room temperature but becomes malleable at high temperature when the exchange reaction occurs, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Appplication of renewable thiols in the preparation of poly(thiourethane) covalent adaptable networks

  • Guerrero, Federico
  • Ramis Juan, Xavier
  • Flor López, Sílvia de la
  • Serra Albet, Maria Àngels
One of the industries most dependent on fossil fuels is the polymer industry: over 99% of polymer production uses monomers derived from oil and gas. For this reason, polymers derived from biomass (biopolymers) are widely developed. Different monomers derived from biomass have been proposed in the last decades: lignin, saccharides, vegetable oils, and terpenes, among others. On the other hand, thermosetting polymers are advantageous in a broad range of industrial applications due to their chemical and thermal resistance and excellent mechanical performance. However, once finished their useful life, due to the impossibility of being recycled, they become an environmental problem, being incineration or landfill the only solutions. A new family of polymeric materials is being developed to solve thermosetting recycling issues, starting from renewable materials. They present a covalent adaptable network structure (vitrimeric materials) whose topology can be changed by thermally activated reversible chemical processes. These reversible reactions allow this type of cross-linked polymers' reprocessing and recycling and exhibit other excellent characteristics such as self-healing or self-welding properties, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electro-responsive shape-memory composites obtained via dual-curing processing

  • Russo, Claudio
  • Ramirez Falo, José Luis
  • Fernández Francos, Xavier
  • Flor López, Sílvia de la
In this work, electro-responsive shape-memory actuators were developed by incorporating a conductive heater in a dual-curing thiol-acrylate-epoxy shape-memory polymer (SMP). A conductive heater, consisting of an electrically conductive silverink track printed on Kapton® substrate, was assembled to the SMP, taking advantage of the dual-curing processing. The shape-memory effect (SME) was activated by the heat dissipated by the Joule effect in the conductive track. Boron nitride agglomerates were dispersed in the thiol-acrylate-epoxy layers to increase thermal conductivity and achieve faster shape-recovery. A thermoelectric control unit was developed to control the shape recovery of the electro-responsive actuators and provide different activation strategies. The electrically activated SME was investigated and compared to a traditional SME based on an external heating source given by the dynamic mechanical analyzer (DMA) apparatus. Electro-responsive actuators were found extremely faster than the conventional SMPs based on external heating. The fastest recovery was obtained by the 15% boron nitride actuator, which recovered the 100% of the original shape in only 8 s. The thermoelectric controlling device provided an optimal control of the shape recovery speed based on the pulse width modulation of the heating current under the application of a low voltage (5 V)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New bio-based poly(acylhydrazone) vitrimers: synthesis and characterization

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of the effect of coupling agent on the kinetic and mechanical properties of a 3D printable dual curing epoxy/acrylate system

  • Escribá Flores, Armando Alfredo
  • Fernández Francos, Xavier
  • Ferrando Piera, Francesc
  • Fabregat Sanjuan, Albert
In recent years, the use of vat photopolymerization in additive manufacturing technology has created a prominent potential in the world manufacturing industry due to its adaptability and quick production capabilities. However, a challenge faced by this technology is creating large-sized parts and ensuring the geometric versatility of processed parts. The physical and mechanical properties of existing materials limit their processing, affecting their final applications. Moreover, dual-curing systems allow new possibilities to 3D printing if shape geometry is changed after the first curing stage and fixed in the second curing stage. This study aims to address these challenges by developing a dual-curing system involving epoxy/acrylic resins. We assess the kinetic and mechanical behavior, focusing on variations in the network coupling agent. The initial curing stage of a low viscous formulation, achieved through processing on a DLP 3D printer (partially cured), produces a flexible material allowing deformations up to 160 %. The second curing stage, achieved through thermal treatment, transforms the material into a rigid system with an impressive maximum tensile strength close to 80 MPa. We compare the contribution of the bonding agent in partial and total cured states. Comprehensive mechanical tests have been performed, including tension and shear evaluations. Results have been favorably aligned with relevant literature. The dual-curing approach shows promise in expanding 3D printing vat photopolymerization applications, providing new design and manufacturing possibilities by enhancing material availability. Our findings emphasize the benefits of the dual-curing system, including low viscosity, shape manipulation during intermediate curing that allows complex geometries with fast procedures and without the need of supports and exceptional strength and durability achieved in the final curing phase. Results on mechanical characterization in joints show that dual curing resins could be attractive in applications where different parts must be joined and precise alignment and structural integrity are crucial. The main reason for that is the interaction with the bonding agent in each state of the dual curing., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-154). Armando Escribá acknowledges the Martí Franquès Research Fellowship Programme (2021PMFBS- 08). X. Fernández-Francos acknowledges the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The use of lanthanide triflates in the preparation of poly(thiourethane) covalent adaptable networks

  • Guerrero Ruiz, Federico
  • Gamardella, Francesco
  • Ramis Juan, Xavier
  • De la Flor López, Silvia
  • Serra Albet, Maria Àngels
Covalent adaptable networks (CANs) are new polymeric materials with the mechanical properties of thermosets and the possibility of being recycled like thermoplastics. Poly(thiourethane) networks have demonstrated vitrimeric-like behavior at high temperatures due to the trans-thiocarbamoylation process, which Lewis acids and bases can accelerate. In this study, we report the use of lanthanide triflates (La, Sm, Dy, Er, and Yb) as Lewis acid catalysts, a greener alternative to other metallic catalysts as dibutyltin dilaurate (DBTDL) widely used in poly (urethane) and poly(thiourethane) networks. Moreover, they are not as reactive as DBTDL, and the curing mixture can be manipulated for a longer time at room temperature. As monomers, trimethylolpropane tris(3- mercapto propionate) (S3), hexamethylene diisocyanate (HDI), and isophorone diisocyanate (IPDI) have been used. We have demonstrated that the materials prepared with lanthanum triflate present the lowest relaxation times than those prepared with other lanthanide triflates or DBTDL. Calorimetry (DSC) and infrared spectroscopy (FTIR) were applied to study the curing process. The materials obtained were fully characterized by thermog- ravimetric analysis (TGA) and thermomechanical tests (DMA)., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/10.13039/ 501100011033. We acknowledge these grants and to the Generalitat de Catalunya (2021-SGR-00154 and BASE3D). F.G. thanks to MCNI/AEI for the grant PRE2018-084192., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reprocessable epoxy-acrylate 3D-printing resins with improved compatibility

  • Casado Gómez, Jaime
  • Faja, Alba
  • Moradi, Sasan
  • Ramis Juan, Xavier
  • Konuray, Ali Osman
  • Fernández Francos, Xavier
In this work, a practical approach is described to prepare acrylate-epoxy photo-thermal (dual) curing DLP 3-D printing resins that are reprocessable through transesterification. By choosing to perform the thermal cure before or after the photocure, the intermediate, partially-cured material can be obtained in different conditions, offering great flexibility for processing. The polyacrylate and polyepoxide phases are compatibilized by methacrylate-functional carboxylic acids that are initially added to the liquid resin. By employing methacrylate precursors with different chain lengths in the preparation of these coupling agents (CA), the final materials are obtained either as elastomeric or glassy solids. The glass transition temperatures ranged from 5 °C up to 100 °C and Young's moduli ranged from 13 MPa up to 2 GPa. The dynamic behavior was dictated by the choice of the anhydride precursor such that CAs prepared using glutaric anhydride lead to stress relaxation which was an order of magnitude faster than formulations prepared with bulkier anhydrides such as hexahydro-4-methyl phthalic anhydride. The Arrhenius activation energy of relaxation were in the range 90–120 kJ/mol typical of beta-hydroxyester vitrimers. The hot-press reprocessed materials showed near-complete or virtually complete recovery of and . Malleability performance of the materials was either good or excellent., The authors acknowledge the funding sources disclosed below. The authors thank Po.Int.ErS.R.L. for supplying the epoxy resin. The authors also thank Armando Escribá Flores for his help with the DLP-3D print ing. X. Fernández-Francos and O. Konuray acknowledge the Serra- Húnter programme (Generalitat de Catalunya). Funding: this work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Easily recycled thiol-ene elastomers with controlled creep

  • Alzubi, Hani Khaled Mohammad
  • Konuray, Ali Osman
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
  • Moradi, Sasan
Starting from in-house synthesized allylic monomers containing dynamic disulfide (S–S) bonds, a set of vitrimeric thiol-ene elastomers were prepared and characterized with respect to their viscoelastic and tensile properties. A mixture of a disulfide-containing diallyl monomer and disulfide-free diallyl, namely diallyl phthalate, was combined stoichiometrically with a thiol crosslinker, trimethylolpropane tris (3-mercaptopropionate), to obtain soft thiol-ene thermosets with varying degrees of dynamic bond content. The materials were able to relax strain induced stress completely and rapidly at moderately high temperatures when the disulfide content was above a certain threshold, which was accurately predicted by a statistically-based network (de)crosslinking model. Relaxation of materials with disulfide content below this threshold required the activation of an additional transesterification bond exchange process by increasing the temperature. Recycling of the materials could be achieved by hot-press molding at convenient temperatures. Especially in low-disulfide containing materials, changes were observed in the material structure and properties with increasing number of reprocessing cycles. However, a significant reduction in ambient temperature creep was observed upon reducing the disulfide content. The disulfide content can be easily optimized to yield minimal loss of mechanical property and minimal creep. This work opens up new avenues for the cost-effective development of vitrimeric elastomers with minimal ambient temperature creep., The authors acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCNI/AEI) through R&D project PID2020- 115102RB-C22, and also by Generalitat de Catalunya (2021-SGR- 00154). O. Konuray and X. Fernández-Francos acknowledge the Serra- Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quantitative prediction of stress relaxation kinetics in dissociative covalent adaptable networks

  • Mangialetto, Jessica
  • Konuray, Ali Osman
  • Moradi, Sasan
  • Fernández Francos, Xavier
  • Brancart, Joost
  • Van den Brande, Niko
  • Ramis Juan, Xavier
  • Assche, Guy van
A kinetic-structural model was developed to quantitatively describe the stress relaxation behavior of covalent adaptable networks based on the reversible Diels–Alder chemistry. The model draws on the analogy between stress relaxation and network de-cross-linking, where residual stress is attributed to elastically active network strands. A recursive network analysis, based on the Macosko–Miller approach, is coupled with a model that incorporates the reversible Diels–Alder reaction kinetics, stress-induced bond activation, and the reduced efficiency of bond exchanges during late-stage relaxation. The model was validated using rheological data from two Diels–Alder-based networks, with cross-linking kinetics and equilibrium conversions used to predict initial stresses. The stress relaxation behavior, including characteristic times and shape parameters across varying temperatures and cross-link densities, was accurately predicted using only two temperature-independent parameters. Beyond predictive capabilities, the model enables the extraction of kinetic and thermodynamic parameters from experimental data, supporting its use in both direct simulation and inverse design. Thanks to its low computational cost, the framework facilitates rapid exploration of compositional and structural scenarios, aiding the design of application-specific materials. This approach offers a robust and efficient tool for bridging the gap between dynamic covalent chemistries and the development of functional materials and their advanced processing., The authors from Universitat Politecnica de Catalunya acknowledge funding provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033) through the R&D projects PID2020- 115102RB-C22 and PID2023-147128OB-C21, as well as by the Generalitat de Catalunya (2021-SGR-00154). X.F.-F. and O.K. acknowledge the Serra-Hunter ́ Programme (Generalitat de Catalunya). The authors from Vrije Universiteit Brussel acknowledge funding provided by Research Foundation� Flanders (FWO-Vlaanderen) for the junior postdoctoral fellowship (1203524N) of J.M. and the senior postdoctoral fellowship (12E1123N) of J.B. The authors would like to acknowledge Prof. Dr. Jan Vermant of the Soft Materials laboratory of ETH Zürich for his support in the rheological analysis of these materials., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dual-cured thermosets based on eugenol derivatives and thiol chemistry

  • Roig Gibert, Adriá
  • Ramis Juan, Xavier
  • De la Flor López, Silvia
  • Serra Albet, Maria Àngels
This paper aims to increase sustainability in thermosetting polymeric fields using bio-based monomers and environmentally friendly processing technologies based on dual-curing. Eugenol has been transformed into acrylate epoxy eugenol (AEEU) that can participate in thio-Michael additions and thiol-epoxy reactions. These reactions constitute the first and second steps of the sequential dual-curing process. A basic catalyst has been added to favor the kinetics of the curing process. We have selected three thiols with functionalities 3, 4, and 6, the first is derived from eugenol, and the others are derived from pentaerythritol, all can be obtained from renewable resources. To tailor and improve the intermediate material characteristics in the dual-curing process, we have added the triacrylate of glycerol. By changing its proportion, a liquid or a rubbery solid can be obtained as an intermediate, which allows a significant number of application technologies. Rheology, DSC, and FTIR were used to follow the evolution of both curing steps and to confirm the sequential character of the dual-curing. The thermal characteristics of intermediate and final materials have been evaluated by TGA and DMTA. Tensile tests at break were performed to evaluate the mechanical properties., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR. We acknowledge these grants, and we also thank the Generalitat de Catalunya (2021-SGR00154). Bruno Bock Thiochemicals is acknowledge for kindly giving us thiol monomers., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Toward the recyclability of thermosetting polymers

  • Gamardella, Francesco
  • Flor López, Sílvia de la
  • Ramis Juan, Xavier
  • Serra Albet, Maria Àngels
Polymers, commonly known with the generic term “plastics,” are nowadays key materials in many industrial sectors and in our daily life. The word “polymer” is derived from the Greek words “polis” (many) and “meros” (part). Therefore, polymers are materials which consist of large molecules whose structure is made up of several smaller repeating units called monomers. They are used in a great number of applications and fields such as packaging, textile, automotive, building, aerospace or pharmacy. The broad applicability of these materials is due to their low cost and high performances, which arise from the combination of several properties, among others: easy processing, versatility, durability and high strength to weight ratio. The production of plastics has continuously increased over the last 60 years from the 1.7 million metric tons (Mt) produced in 1950 to 348 Mt in 2017 [1]. However, the mismatch between the increasing production rate and an adequate result in waste management has led to serious environmental problems [2, 3]. For this reason, in 2018, the European Commission communicated the “European Strategy for Plastics in a Circular Economy,” emphasizing the need for improved design and production of plastics to facilitate reuse, repair and recycling [4, 5]. From the data provided by Geyer et al. [6], approximately 6,000 Mt of plastic waste has been produced since 1950, and around 5,000 Mt of them has been discarded in landfills or in the natural environment, as it is shown in the following graph, Peer Reviewed, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recyclable dual-curing thiol-isocyanate-epoxy vitrimers with sequential relaxation profiles

  • Moradi, Sasan
  • Fernández Francos, Xavier
  • Konuray, Ali Osman
  • Ramis Juan, Xavier
Two series of poly(thiourethane)s-poly(thiol-epoxy) hybrids were prepared from dual-curing, stoichiometric thiol:isocyanate:epoxy mixtures. 1-methylimidazole (MI) was used as initiator for the thiol-isocyanate and thiol-epoxy curing reactions. A salt of tetraphenylborate derived from highly basic amine 1,5,7 triazabicyclo [4,4,0]dec-5-ene (TBD) was used as catalyst for the activation of bond exchange reactions. The curing kinetics and the glass transition temperature (Tg) of the samples were studied by differential scanning calorimetry (DSC). Thermal stability was characterized by thermogravimetric analysis (TGA). Stress relaxation dynamics related to the bond exchange reactions were studied by dynamic mechanical analysis (DMA). Recyclability of the fully cured samples according to the DMA results was carried out by hot-pressing at elevated temperatures. The results show that the curing process takes place in a controlled and sequential way: the thiol-isocyanate reaction takes place first, at moderate temperatures, followed by the thiol-epoxy reaction, which is completed at higher temperatures. The analysis of stress relaxation evidences a complex two-step relaxation behavior depending on the contribution of isocyanate and epoxy groups to the mixture. Isocyanate-rich materials show a simple relaxation process corresponding to the trans-thiocarbamoylation exchange reactions. Epoxy-rich materials show, in contrast, a two-step relaxation processes evidencing that trans-thiocarbamoylation alone may not be sufficient to relax the stress completely, due to an apparently permanent network structure. However, complete stress relaxation is possible for epoxy-rich materials through additional bond exchange reactions such as transesterification or dynamic thiol-Michael, but at a slower rate. Depending on the composition and the temperature, full recycling of the material can be achieved at moderate temperatures in a timescale of minutes to hours., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D project PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021- SGR-00154), Spain. X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Harnessing disulfide and transesterification bond exchange reactions for recyclable and reprocessable 3D-printed vitrimers

  • Vilanova Pérez, Anna
  • Moradi, Sasan
  • Konuray, Ali Osman
  • Ramis Juan, Xavier
  • Roig Gibert, Adriá
  • Fernández Francos, Xavier
Two new vitrimeric materials have been studied for potential additive manufacturing applications such as 3D- printing. A monomer containing disulfide bonds and ß-hydroxyesters was easily synthesized from two low- cost and commercially available reagents. Another disulfide-containing monomer was synthesized for compar- ison purposes. Materials were prepared through a UV-light radical polymerization of methacrylates. The addition of two reactive diluents such as poly(ethylene glycol) methyl ether methacrylate (PEGMA) and ethylene glycol phenyl ether methacrylate (EGPMA) was necessary to achieve a suitable viscosity for the curing as well as for their printability. The curing process was controlled by FTIR. Thermomechanical properties were investigated by means of DMTA analysis revealing near-ambient Tg values. Stress relaxation tests revealed that both materials were capable to relax the 63% of the initial stress in less than 10 min at 110 ¿C. The recyclability of the materials was achieved, and the mechanical and thermomechanical properties of the recycled samples were compared to the virgin ones revealing a great recovery of the initial properties. Finally, Digital Light Processing (DLP) technique was used to print complex structures with high resolution highlighting the great potential of these vitrimeric materials in 3D printing., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-00154 and BASE3D). X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of the non-ideal crosslinking process in thiol-X “click” thermosets

  • Belmonte Parra, Alberto
  • De la Flor López, Silvia
  • Konuray, Ali Osman
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
Thiol-click reactions are widely used in the preparation of thermosets. The network build-up process follows step-wise polymerization behavior, which is commonly analyzed assuming ideal step-wise behavior using well- known expressions such as the Flory-Stockmayer equation for the prediction of the gel point conversion. However, a number of factors contributing to departures from the expected ideal behavior can be identified: a) impurity of the reagents, b) complexity of the reaction mechanism and c) internal cyclization processes. In order to maximize the accuracy of predictions about the expected crosslinking behavior and therefore fine-tune the design of thermosets designed as dual-curing systems or covalent adaptable networks (CANs), it is necessary to take into consideration all these sources of non-ideality. In this work, we aim to describe the effects of such factors on the network build-up process of thiol-click thermosets, making use of the recursive methodology of Miller and Macosko. The contribution of each factor is analyzed separately and their overall combined effect is discussed in relation with real data reported in the literature and experimental results., This work was funded by the Spanish Ministry of Science and Inno- vation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-154). X. Fernández-Francos and O. Konuray acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic by design: unlocking full relaxation in disulfide epoxy networks

  • Fanlo, Paula
  • Konuray, Ali Osman
  • Ochoteco, Olaia
  • Ximenis, Marta
  • Rekondo, Alaitz
  • Grande, Hans Jürgen
  • Fernández Francos, Xavier
  • Sardon, Haritz
  • Ruiz de Luzuriaga, Alaitz
Aromatic disulfide-containing epoxy networks offer a promising approach to achieving sustainable materials due to their reparable, recyclable, and reprocessable properties. However, in all cases, an excess of hardener is required to achieve full reparability. In this study, a theoretical analysis demonstrates that when aromatic disulfide is incorporated into the amine hardener, the resulting epoxy vitrimer does not fully relax due to epoxy group homopolymerization, which leads to the formation of non-dynamic crosslinks. To overcome this limitation, an epoxy monomer containing disulfide bonds was synthesized. This monomer enables complete relaxation, as the homopolymerized epoxy system also contributes to the formation of dynamic crosslinks. Using this new monomer, epoxy vitrimers were prepared that can relax without requiring an excess of amine. However, these materials exhibit inferior properties compared to those prepared with an aromatic disulfide-based diamine. To enhance their properties, a non-dynamic epoxy was introduced into the formulation. Both experimental and computational results demonstrate that up to 32% of non-dynamic epoxy can be incorporated without compromising dynamic features such as repairability, reprocessability, and recyclability, making this system significantly more suitable for industrial implementation., HS and MX acknowledge PID2022-138199NB-I00 funded by MCIU/AEI/10.13039/501100011033. MX acknowledges the grant from the Gipuzkoa Fellows Programme (G75067454). O. Konuray and X. Fernández-Francos acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023-147128OB-C21, and also by Generalitat de Catalunya (2021-SGR-00154). O. Konuray and X. Fernández-Francos also acknowledge the Serra-Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Critical analysis of the thermal stability of transesterification vitrimers for 3D-printing applications based on digital light processing

  • Romano, Angelo
  • Konuray, Ali Osman
  • Román Concha, Frida Rosario
  • Calventus Solé, Yolanda
  • Fernández Francos, Xavier
  • Roppolo, Ignazio
  • Sangermano, Marco
3D-printable vitrimers processed by digital light processing (DLP) have been recently developed, based on the transesterification reaction of ß-hydroxyester structures from mono- and diacrylate monomers employed in the formulation. These materials show promising repairability and recyclability, in addition to other interesting features such as shape memory and shape reconfigurability. It has been reported that structural changes taking place due to transesterification promote network rearrangement and an enhancement of the thermomechanical properties. However, the elevated temperatures required for the network reconfiguration cast some doubts on their applicability in real-life scenarios. In this paper, we analyze the effect of the thermal treatment on the thermomechanical properties and relaxation behavior of these materials and discuss the underlying mechanism explaining the observed changes. We identify some critical issues related to use of a monoacrylate containing ß-hydroxyester moieties, and propose solutions to overcome the most relevant drawbacks., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI) through R&D project PID2020-115102RB-C22, and also by Generalitat de Catalunya (2021-SGR-154 and BASE3D). XF-F and OK acknowledge the Serra-Húnter program (Generalitat de Catalunya)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Preparation of New Vitrimeric Materials Based on Glycidyl Vanillin-imines

  • Roig, Adrià
  • Petrauskaité, Aina
  • Ramis Juan, Xavier
  • Flor López, Sílvia de la
  • Serra Albet, Maria Àngels
The current exponential growth of the human population is associated with a degradation of the environment. In terms of lack of degradability and persistence in the environment, increasing attention is being paid to polymers. Among them, thermosets, that become hardened in the curing, lead to infusible networks with high strength and solvent resistance and superior mechanical and thermal properties. On the downside, their use raises a severe environmental concern because the covalent linkages in the network are irreversible, preventing recycling. An alternative that overcomes this issue is the use of dynamic covalent chemistry, which relies on chemical processes causing reversible formation and breaking of covalent bonding in response to stimuli and allows obtaining easily recyclable thermosets while retaining the overall polymer structure. Incorporating reversible groups like imines in the network structure can allow the reprocessing and recycling of these materials, maintaining their mechanical performance. The associative mechanism of the imine interchange leads to these materials being included in the group of vitrimers. In our work, the inclusion of the imine groups in the network is based on the use of a diglycidyl diimine obtained from vanillin. This renewable product is condensed with 4,4’-oxydianiline to form the bisphenol-diimine, and then it is reacted with epichlorohydrin to obtain the epoxy-imine monomer with the following structure., Peer Reviewed, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Nous politiouretans hibrids tipus vitrimèric. sintesi i caracterització

  • Guerrero, Federico
  • Flor López, Sílvia de la
  • Ramis Juan, Xavier
  • Serra Albet, Maria Àngels
La preparació de materials híbrids orgànics-inorgànics és una de les estratègies utilitzades per millorar les propietats mecàniques i obtenir materials polimèrics d’altes prestacions. Aquest materials combinen la duresa i resistència de la fase inorgànica, i l’elasticitat i la rigidesa de la matriu orgànica. D’altra banda els vitrimers son polímers entrecreuats amb grups funcionals intercanviables, que permeten llur reciclatge, llur canvi de forma i en molt casos l’autoreparació., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Preparation of poly(thiourethane) networks by using a novel acidic organocatalyst. Evaluation of their vitrimer-like behavior

  • Guerrero Ruiz, Federico
  • Ramis Juan, Xavier
  • Flor López, Sílvia de la
  • Serra Albet, Maria Àngels
In this work, a novel acidic catalyst, isopropyl methane sulfonate, has been tested for the preparation of a series of poly(thiourethane) thermosets (PTU)s. The advantage of this compound is that in addition to being free of metals, by heating at temperatures above 100 °C, it releases methane sulfonic acid, which is the true catalyst allowing to maintain the formulation liquid at room temperature for a longer time than when using the more common dibutyltin dilaurate (DBTDL) catalyst. The materials obtained were characterized by thermogravimetry and thermomechanical analysis, which allow determining higher initial degradation temperatures than using tetraphenyl borate amidinium salts as basic organic catalysts. The PTUs prepared with this catalyst show good vitrimeric-like characteristics, with faster relaxation on increasing the amount of catalyst. The materials could be recycled without losing their chemical structure and mechanical performance., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/ 10.13039/ 501100011033. We acknowledge these grants and to the Generalitat de Catalunya (2017-SGR-77 and BASE3D). F.G. thanks to MCNI/AEI for the grant PRE2018-084192., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Eugenol-based dual-cured materials with multiple dynamic exchangeable bonds

  • Roig Gibert, Adriá
  • Ramis Juan, Xavier
  • De la Flor López, Silvia
  • Serra Albet, Maria Àngels
In the present work, the preparation of sustainable thermosets has been approached simultaneously from three different points of view: a) the use of bio-based monomers chemically modified through green methodologies, b) the adoption of dual curing through click-type reactions to implement more efficient manufacturing processes, and c) inclusion of interchangeable groups in the network, to enable the reuse and recycling of the material at the end of its useful life and avoid waste generation. The first goal has been approached by synthesizing in a greener way an acrylate-epoxy derivative of eugenol (AEEU) and a glycerol triacrylate (GTA), both biobased resources. Then, the second approach was addressed by using biobased cystamine as a crosslinker to obtain materials through a dual-curing procedure based on a first “click” aza-Michael reaction and a second “click” epoxy-amine reaction. Intermediate and final materials could be prepared with different tailorable properties by controlling the molar ratio of the AEEU and GTA. By using DSC and rheology, we could evaluate the sequentiality and the gelation of the curing process. Finally, the covalent adaptable networks (CANs) prepared contained three different types of dynamic bonds (disulfide, esters, and ß-aminoesters) and their thermomechanical properties were tested by DMA revealing Tgs above room temperature from 47 to 70 °C. Bending tests at break were performed to evaluate the mechanical properties reaching values up to 90 MPa of stress at break and 7 % of deformation. Stress relaxation tests showed that all materials could relax the stress at relatively low temperatures (120 °C) in less than 21 min. The associative and dissociative behavior of these materials was investigated through rheology revealing a clear drop of the modulus at high temperatures and frequencies when cystamine was used as a crosslinker. Moreover, their reprocessability was tested obtaining homogeneous samples with no significant changes in their chemical and thermal properties highlighting the great potential and wide range of possibilities in many different fields of these CANs., This work is part of the R&D projects PID2020-115102RB-C21 and PID2020-115102RB-C22 funded by MCNI/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/PRTR. We acknowledge these grants and we also thank to the Generalitat de Cat- alunya (2021-SGR-00154)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Structural design of CANs with fine-tunable relaxation properties: a theoretical framework based on network structure and kinetics modeling

  • Konuray, Ali Osman
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
In this work, we present a model capable of reproducing the stress relaxation dynamics of a wide range of relaxation processes in covalent adaptable networks (CANs) produced by stepwise polymerization. The proposed model captures the effective elastic response of the material subject to an initial stress by analogy with a network decrosslinking process. The combination of a recursive structural model and a kinetic model for the bond exchange reaction makes it possible to predict the expected stress relaxation profile in simple and complex systems depending on the structure of the network, the rate of bond exchange of the different components, and the presence of permanent bonds. After the basic features of the model are analyzed, its prediction capabilities are validated by simulating a number of scenarios taken from the literature. The results show that tailoring of the network architecture enables unprecedented flexibility in the design of CAN-based materials., This work was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D project PID2020-115102RB-C22 and also by Generalitat de Catalunya (2017-SGR-77). X. Fernández-Francos and O. Konuray acknowledge the Serra-Hunter ́ programme (Generalitat de Catalunya)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Stress-relaxing thermosets with easily regulated bond exchange kinetics

  • Konuray, Ali Osman
  • Moradi, Sasan
  • Fernández Francos, Xavier
  • Serra Albet, Maria Àngels
  • Ramis Juan, Xavier
  • Morancho Llena, José María
We have carried out stress-relaxation experiments on poly(acrylate) and poly(thiol-ene) based thermosets prepared from in-house synthesized epoxy-acid adducts with acrylate (for the former) and ene functionalities (for the latter). The adducts contain disulphide bonds at their center which allow their cured thermosets to undergo disulphide metathesis when heated above a certain temperature [1]. The possibility of concurrent transesterification, albeit at a significantly lower rate, between ester and hydroxyl moieties present in the components is not discarded, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Complete relaxation of thiol-ene vitrimeric elastomers with drastically reduced dynamic content

  • Alzubi, Hani Khaled Mohammad
  • Moradi, Sasan
  • Konuray, Ali Osman
  • Fernández Francos, Xavier
  • Ramis Juan, Xavier
Establishing a balance between polymer flow for reprocessing and mechanical robustness at service temperatures presents a challenge in designing covalent adaptable networks (CANs). In this study, we present a series of thiol-ene vitrimeric materials whose dynamicity is based on disulfide and beta-hydroxyester bonds. Firstly, through a facile epoxy-acid reaction, either a disulfide-containing or disulfide-free allyl precursor was synthesized. Subsequently, the two allyls were mixed in varying proportions and cured by a trithiol crosslinker. A dithiol chain extender was also added into the formulation at varying proportions in order to modify the network architecture and thus regulate dynamicity. The resulting viscoelastic and vitrimeric behavior as influenced by the choice of monomer type and proportion was studied in depth. Results show that disulfide content of as low as 17 % is sufficient to impart full recyclability to these versatile materials. Our tests also revealed that the most significant factor for creep suppression is not the disulfide content but the network connectivity dictated by the average thiol functionality. The cured materials are easily recyclable by heating under pressure, yielding comparable mechanical and thermomechanical properties across several cycles., The authors acknowledge the funds provided by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through R&D projects PID2020-115102RB-C22 and PID2023- 147128OB-C21, and also by Generalitat de Catalunya (2021-SGR- 00154). O. Konuray and X. Fernández-Francos acknowledge the Serra- Húnter programme (Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)