RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Artículo científico (JournalArticle)
Lime/pozzolan/geopolymer systems: Performance in pastes and mortars
[EN] Use of lime as construction material is limited mainly by low initial strength. These properties can be
improved by adding pozzolanic materials, but the evolution of the reaction usually needs older ages than
7 days. Alkali-activated materials, or geopolymers, are good-performance materials that can be produced
with residual waste. The combination of traditional and new materials can lead to new uses of lime mortars.
This paper studies a lime/pozzolan and geopolymer mixture. The chosen pozzolan is fluid catalytic
cracking catalyst residue (FCC), a material employed as a precursor in alkali-activated material. FCC is
activated by two activators: a mixture of NaOH and waterglass; a mixture of NaOH and rice husk ash
(RHA). The new materials were studied in microstructure and mechanical behaviour terms. The results
demonstrated that lime/pozzolan/geopolymer obtained superior compressive strengths after 1 curing
day to that obtained for the corresponding lime/pozzolan mortar after 90 days. An improvement in compressive
strength of around 145% was achieved for the mortar with 40% geopolymer compared to the
mortar with only lime/pozzolan at 28 curing days., This research was supported by Centro de Cooperacion al Desarrollo (CCD) of the Universitat Politecnica de Valencia, ADSIDEO-COOPERACION 2017 Program "Reutilizacion de residuos agricolas e industriales para la fabricacion de conglomerantes sostenibles en paises en desarrollo (AD1708)". The investigation is framed within the ECOSOST (RTI2018-097612-B-C21-AR) project supported by MINECO and FEDER funds. The authors are grateful to the Electron Microscopy Service of the Universitat Politecnica de Valencia, Dacsa Group S.A., Cales Pascual S.L. and BP Oil Espana S.A.U.