Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Variable rate application of plant protection products in vineyard using ultrasonic sensors

  • Gil Moya, Emilio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
  • Val, Luis
The changes in the shape and size of vines during the growing season require a continuous adjustment of the applied dose to optimize spray application efficiency. Target detection with ultrasonic sensors can be used to adapt the applied dose following the principles of the variable rate technology. A multi-nozzle air-blast sprayer was fitted with three ultrasonic sensors and three electro-valves, to modify the flow rate from the nozzles in real time, in relation to the variability of crop width. A constant application rate of 300 l ha−1 was compared with a variable rate application using the tree row volume principle at a 0.095 l m−3 canopy. The total flow rate sprayed by the nozzles was modified according to the variations of crop width measured by the ultrasonic sensors. On average 58% less liquid was applied compared to the constant rate application, with similar deposition on leaves with both treatments. A detailed analysis of savings indicates differences between the lower, middle and top part of the crop, in accordance with the leaf area distribution with crop height. No significant differences between treatments were detected in uniformity of liquid distribution and capability to reach the inner parts of the crop. This important reduction in spray volume could be followed by an equivalent reduction of plant protection products but further research work is needed to guarantee biological efficacy of a reduced dose., This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research project AGL2002-04260-C04-03
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Design of a decision support method to determine volume rate for vineyard spraying

  • Gil Moya, Emilio
  • Escolà i Agustí, Alexandre
Dose determination in crops such as grapevine, which develops a large canopy within a relatively short period of time, becomes a key factor on the final success of plant protection product (PPP) application. Efficacy of PPP applications depends on many factors. Based on multiple data obtained over several years in real working conditions using different types of sprayers in vineyards, and by adding a complete data base about crop characteristics (structure, crop stage, leaf area, LAI, etc.), the objective of this work has been to develop an easy and useful tool, DOSAVIÑA, able to determine the optimal volume rate in spray applications in vineyards. DOSAVIÑA, based on a spreadsheet (Microsoft Excel ), allows quantifying all the parameters involved in the application process (sprayer type, crop characteristics, working conditions, weather, etc.), and to determine the efficiency of the application. By selecting and choosing the different options for each parameter (crop, pesticide, working conditions, weather conditions, sprayer, and droplet characteristics) the program calculates the theoretical volume rate (L ha‐1) based on two different methods, the Optimal Coverage Method and the Tree‐Row‐Volume method. Results obtained with DOSAVIÑA allow reducing the recommended volume rate in comparison with traditional application rate selection managed for farmers. In order to make a complete and useful tool, the program includes the possibility to calculate the final working parameters (pressure, nozzle type, and size) according to the recommendations on volume rate (L ha‐1) obtained., This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research projects AGL2002‐04260‐C04‐03 and AGL2007‐66093‐ C04‐02/AGR
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Variable rate application of plant protection products in vineyard using ultrasonic sensors

  • Gil Moya, Emilio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Planas de Martí, Santiago
  • Val, Luis
The changes in the shape and size of vines during the growing season require a continuous adjustment of the applied dose to optimize spray application efficiency. Target detection with ultrasonic sensors can be used to adapt the applied dose following the principles of the variable rate technology. A multi-nozzle air-blast sprayer was fitted with three ultrasonic sensors and three electro-valves, to modify the flow rate from the nozzles in real time, in relation to the variability of crop width. A constant application rate of 300 l ha−1 was compared with a variable rate application using the tree row volume principle at a 0.095 l m−3 canopy. The total flow rate sprayed by the nozzles was modified according to the variations of crop width measured by the ultrasonic sensors. On average 58% less liquid was applied compared to the constant rate application, with similar deposition on leaves with both treatments. A detailed analysis of savings indicates differences between the lower, middle and top part of the crop, in accordance with the leaf area distribution with crop height. No significant differences between treatments were detected in uniformity of liquid distribution and capability to reach the inner parts of the crop. This important reduction in spray volume could be followed by an equivalent reduction of plant protection products but further research work is needed to guarantee biological efficacy of a reduced dose., This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research project AGL2002-04260-C04-03
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design of a decision support method to determine volume rate for vineyard spraying

  • Gil Moya, Emilio
  • Escolà i Agustí, Alexandre
Dose determination in crops such as grapevine, which develops a large canopy within a relatively short period of time, becomes a key factor on the final success of plant protection product (PPP) application. Efficacy of PPP applications depends on many factors. Based on multiple data obtained over several years in real working conditions using different types of sprayers in vineyards, and by adding a complete data base about crop characteristics (structure, crop stage, leaf area, LAI, etc.), the objective of this work has been to develop an easy and useful tool, DOSAVIÑA, able to determine the optimal volume rate in spray applications in vineyards. DOSAVIÑA, based on a spreadsheet (Microsoft Excel ), allows quantifying all the parameters involved in the application process (sprayer type, crop characteristics, working conditions, weather, etc.), and to determine the efficiency of the application. By selecting and choosing the different options for each parameter (crop, pesticide, working conditions, weather conditions, sprayer, and droplet characteristics) the program calculates the theoretical volume rate (L ha‐1) based on two different methods, the Optimal Coverage Method and the Tree‐Row‐Volume method. Results obtained with DOSAVIÑA allow reducing the recommended volume rate in comparison with traditional application rate selection managed for farmers. In order to make a complete and useful tool, the program includes the possibility to calculate the final working parameters (pressure, nozzle type, and size) according to the recommendations on volume rate (L ha‐1) obtained., This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research projects AGL2002‐04260‐C04‐03 and AGL2007‐66093‐ C04‐02/AGR