Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rainbow-trapping absorbers: Broadband, perfect and asymmetric sound absorption by subwavelength panels for transmission problems

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero García, Vicente
  • Pagneux, Vincent
  • Groby, J.P.
[EN] Perfect, broadband and asymmetric sound absorption is theoretically, numerically and experimentally reported by using subwavelength thickness panels in a transmission problem. The panels are composed of a periodic array of varying crosssection waveguides, each of them being loaded by Helmholtz resonators (HRs) with graded dimensions. The low cut-off frequency of the absorption band is fixed by the resonance frequency of the deepest HR, that reduces drastically the transmission. The preceding HR is designed with a slightly higher resonance frequency with a geometry that allows the impedance matching to the surrounding medium. Therefore, reflection vanishes and the structure is critically coupled. This results in perfect sound absorption at a single frequency. We report perfect absorption at 300¿Hz for a structure whose thickness is 40 times smaller than the wavelength. Moreover, this process is repeated by adding HRs to the waveguide, each of them with a higher resonance frequency than the preceding one. Using this frequency cascade effect, we report quasi-perfect sound absorption over almost two frequency octaves ranging from 300 to 1000¿Hz for a panel composed of 9 resonators with a total thickness of 11¿cm, i.e., 10 times smaller than the wavelength at 300¿Hz., The authors acknowledge fnancial support from the Metaudible Project No. ANR-13-BS09-0003, cofunded by ANR and FRAE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quasi-perfect absorption by sub-wavelength acoustic panels in transmission using accumulation of resonances due to slow sound

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Pagneux, Vincent
  • Groby, J.P.
[EN] We theoretically and experimentally report sub-wavelength resonant panels for low-frequency quasi-perfect sound absorption including transmission by using the accumulation of cavity resonances due to the slow sound phenomenon. The sub-wavelength panel is composed of periodic horizontal slits loaded by identical Helmholtz resonators (HRs). Due to the presence of the HRs, the propagation inside each slit is strongly dispersive, with near-zero phase velocity close to the resonance of the HRs. In this slow sound regime, the frequencies of the cavity modes inside the slit are down-shifted and the slit behaves as a subwavelength resonator. Moreover, due to strong dispersion, the cavity resonances accumulate at the limit of the bandgap below the resonance frequency of the HRs. Near this accumulation frequency, simultaneously symmetric and antisymmetric quasi-critical coupling can be achieved. In this way, using only monopolar resonators quasi-perfect absorption can be obtained in a material including transmission., This work has been funded by the Metaudible Project No. ANR-13-BS09-0003, cofunded by ANR and FRAE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perfect Absorption of Sound by Rigidly-Backed High-Porous Materials

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Groby, J.P.
[EN] We present the conditions to observe perfect sound absorption by rigidly-backed layers of rigid-frame highporous materials. We theoretically analyze different configurations of increasing complexity: a single layer of high-porous material, a layer of high-porous material with an air gap (air plenum), and an optimized multilayer structure. First, we show that to obtain normal incidence perfect sound absorption at the first so-called quarterwavelength resonance of a single rigidly-backed high-porous layer, the thickness of the material is strongly related to its flow resistivity. In particular, perfect sound absorption is observed when the quarter-wavelength resonance is around the characteristic Biot frequency of the high-porous media. We found that the optimal thickness of the layer is 4.64 smaller than the perfectly absorbed wavelength when using one-parameter empirical models for the effective parameters of the high-porous material. Then, we analyze the behavior of the structure for oblique angles of incidence, showing that perfect sound absorption is also produced for other incident angles and frequencies. Second, an air gap is introduced between the high-porous layer and the rigid backing. The gap allows to produce perfect sound absorption for structures thicker than the optimal one and for media with large intrinsic losses, i.e., for materials with high flow resistivity. Finally, optimized multilayer structures are proposed, which present broadband and perfect sound absorption. The existence of perfect absorption is related to the impedance matching, which is produced when the intrinsic losses of the system exactly compensate the leakage of the structure due to its resonance. Thus, to observe perfect sound absorption, in addition to and material properties, the total thickness of any multilayered porous structure is constrained to its quarter-wavelength resonance because of the lack of deep-subwavelength resonance in the system., The authors acknowledge financial support from the Metaudible Project No. ANR-13-BS09-0003, co funded by ANR and FRAE. This article is based upon work from COST Action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband quasi perfect absorption using chirped multi-layer porous materials

  • Jimenez, Noe|||0000-0002-6539-670X
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Romero García, Vicente
This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses, the system is designed to have broadband unidirectional and quasi perfect absorption. The transfer and scattering matrix formalism, together with numerical simulations based on the finite element method are used to demonstrate the results showing excellent agreement between them. The proposed system allows to construct broadband sound absorbers with improved absorption in the low frequency regime using less amount of material than the complete bulk porous layer. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)., This work has been funded by the Metaudible project ANR-13-BS09-0003, co-funded by ANR and FRAE, and also by Ministerio de Economia y Competitividad (Spain) and European Union FEDER through project FIS2015-65998-C2-2-P. We acknowledge project AICO/2016/060 by Consellera de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metadiffusers: Deep-subwavelength sound diffusers

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Cox, Trevor J.
  • Groby, J.P.
[EN] We present deep-subwavelength diffusing surfaces based on acoustic metamaterials, namely metadiffusers. These sound diffusers are rigidly backed slotted panels, with each slit being loaded by an array of Helmholtz resonators. Strong dispersion is produced in the slits and slow sound conditions are induced. Thus, the effective thickness of the panel is lengthened introducing its quarter wavelength resonance in the deep-subwavelength regime. By tuning the geometry of the metamaterial, the reflection coefficient of the panel can be tailored to obtain either a custom reflection phase, moderate or even perfect absorption. Using these concepts, we present ultra-thin diffusers where the geometry of the metadiffuser has been tuned to obtain surfaces with spatially dependent reflection coefficients having uniform magnitude Fourier transforms. Various designs are presented where, quadratic residue, primitive root and ternary sequence diffusers are mimicked by metadiffusers whose thickness are 1/46 to 1/20 times the design wavelength, i.e., between about a twentieth and a tenth of the thickness of traditional designs. Finally, a broadband metadiffuser panel of 3 cm thick was designed using optimization methods for frequencies ranging from 250 Hz to 2 kHz., This article is based upon work from COST Action DENORMS - CA15125, supported by COST (European Cooperation in Science and Technology). The authors acknowledge financial support from the Metaudible Project No. ANR-13-BS09-0003, cofunded by ANR and FRAE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultra-thin metamaterial for perfect and quasi-omnidirectional sound absorption

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Huang, Weichung
  • Pagneux, Vincent
  • Groby, J.P.
[EN] Using the concepts of slow sound and critical coupling, an ultra-thin acoustic metamaterial panel for perfect and quasi-omnidirectional absorption is theoretically and experimentally conceived in this work. The system is made of a rigid panel with a periodic distribution of thin closed slits, the upper wall of which is loaded by Helmholtz Resonators (HRs). The presence of resonators produces a slow sound propagation shifting the resonance frequency of the slit to the deep sub-wavelength regime (lambda/88). By controlling the geometry of the slit and the HRs, the intrinsic visco-thermal losses can be tuned in order to exactly compensate the energy leakage of the system and fulfill the critical coupling condition to create the perfect absorption of sound in a large range of incidence angles due to the deep subwavelength behavior., This work has been funded by the Metaudible Project No. ANR-13-BS09-0003, co-funded by ANR and FRAE.