Pasar al contenido principal

ONDAS ACUSTICAS EN CRISTALES, MEDIOS ESTRUCTURADOS Y METAMATERIALES

FIS2015-65998-C2-2-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stealth Acoustic Materials

  • Romero-García, Vicente|||0000-0002-3798-6454
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Lamothe, N.
  • Theocharis, G.
  • Richoux, O.
[EN] We report the experimental design of a one-dimensional stealth acoustic material, namely a material that suppresses the acoustic scattering for a given set of incident wave vectors. The material consists of multiple scatterers, rigid diaphragms, located in an air-filled acoustic waveguide. The position of the scatterers has been chosen such that in the Born approximation a suppression of the scattering for a broad range of frequencies is achieved and thus a broadband transparency. Experimental results are found in excellent agreement with the theory despite the presence of losses and the finite size of the material, features that are not captured in the theory. This robustness as well as the generality of the results motivates realistic potential applications for the design of transparent materials in acoustics and other fields of wave physics., This work has been funded by RFI Le Mans Acoustique (Region Pays de la Loire) in the framework of the APA-MAS project, by the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire as well as by the Ministerio de Economia y Competitividad (Spain) and European Union FEDER through project FIS2015-65998-C2-2-P. V. Romero-Garcia and L. M. Garcia-Raffi acknowledge the short-term scientific mission (STSM) funded by the COST (European Cooperation in Science and Technology) Action DENORMS - CA15125.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelización numérica y caracterización experimental de materiales absorbentes: competencias profesionales del ingeniero acústico, Numerical modeling and experimental characterization of absorbent materials: professional competencies of the acoustic engineer

  • Atiénzar Navarro, Roberto
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • del Rey, Romina|||0000-0001-5907-0677
[ES] En este trabajo se desarrollan de forma numérica modelos empíricos que permiten conocer el comportamiento acústico de materiales utilizados en soluciones constructivas en la edificación. Este trabajo se engloba dentro del Máster Universitario en Ingeniería Acústica (MIA) de la Escuela Politécnica Superior de Gandía en la Universitat Politècnica de València. El ingeniero acústico, para conseguir todas las competencias que se exigen en la titulación, necesita conocer el comportamiento acústico de materiales, o soluciones acústicas, así como también necesita desarrollar herramientas de simulación numérica. Se propone, en este estudio, una evaluación numérica de modelos empíricos que permita al alumnado combinar competencias de asignaturas diferentes para alcanzar un objetivo común, ofreciendo así al alumnado herramientas multidisciplinares que debe utilizar en su incorporación al mundo laboral., [EN] In this work, empirical models are developed in numerical form that allow to know the acoustic behavior of materials used in constructive solutions in the building. This work is included within the Master’s Degree in Acoustic Engineering of the Higher Polytechnic School of Gandia at the Universitat Politècnica de València. The acoustic engineer, in order to achieve all the competencies required, needs to know the acoustic behavior of materials, or acoustic solutions, and it also needs to develop numerical simulation tools. In this study, it is proposed a numerical evaluation of empirical models that allow students to combine competences of different subjects to achieve a common goal, thus offering to the students multidisciplinary tools that should be used in their incorporation into the world of work., Este trabajo está subvencionado por el Ministerio de Economía e Innovación (MINECO) y por el Fondo Europeo (FEDER) a través del proyecto FIS2015-65998-C2-2 y por los proyectos GVA AICO/2016/060 y ACIF/2017/073 por la Consellería de Educación, Investigación, Cultura y Deporte de la Generalitat Valenciana y con el apoyo del Fondo Social Europeo (ESF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fully Noncontact Hybrid NDT for 3D Defect Reconstruction Using SAFT Algorithm and 2D Apodization Window

  • Selim, H.
  • Trull, J.
  • Delgado, M.
  • Romeral, Luis
  • Cojocaru, C.
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] Nondestructive testing of metallic objects that may contain embedded defects of different sizes is an important application in many industrial branches for quality control. Most of these techniques allow defect detection and its approximate localization, but few methods give enough information for its 3D reconstruction. Here we present a hybrid laser-transducer system that combines remote, laser-generated ultrasound excitation and noncontact ultrasonic transducer detection. This fully noncontact method allows access to scan areas on different object's faces and defect details from different angles/perspectives. This hybrid system can analyze the object's volume data and allows a 3D reconstruction image of the embedded defects. As a novelty for signal processing improvement, we use a 2D apodization window filtering technique, applied along with the synthetic aperture focusing algorithm, to remove the undesired effects due to side lobes and wide-angle reflections of propagating ultrasound waves, thus enhancing the resulting 3D image of the defect. Finally, we provide both qualitative and quantitative volumetric results that yield valuable information about defect location and size., The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-1 and FIS2015-65998-C2-2 and by project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana. H. Selim, J. Trull and C. Cojocaru acknowledge partial support from US Army Research, Development, and Engineering Command (RDECOM) through project W911NF-16-1-0563.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Limits of flexural wave absorption by open lossy resonators: reflection and transmission problems

  • Leng, J.
  • Gautier, F.
  • Pelat, A.
  • Groby, J-P
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The limits of flexural wave absorption by open lossy resonators are analytically and numerically reported in this work for both the reflection and transmission problems. An experimental validation for the reflection problem is presented. The reflection and transmission of flexural waves in 1D resonant thin beams are analyzed by means of the transfer matrix method. The hypotheses, on which the analytical model relies, are validated by experimental results. The open lossy resonator, consisting of a finite length beam thinner than the main beam, presents both energy leakage due to the aperture of the resonators to the main beam and inherent losses due to the viscoelastic damping. Wave absorption is found to be limited by the balance between the energy leakage and the inherent losses of the open lossy resonator. The perfect compensation of these two elements is known as the critical coupling condition and can be easily tuned by the geometry of the resonator. On the one hand, the scattering in the reflection problem is represented by the reflection coefficient. A single symmetry of the resonance is used to obtain the critical coupling condition. Therefore the perfect absorption can be obtained in this case. On the other hand, the transmission problem is represented by two eigenvalues of the scattering matrix, representing the symmetric and anti-symmetric parts of the full scattering problem. In the geometry analyzed in this work, only one kind of symmetry can be critically coupled, and therefore, the maximal absorption in the transmission problem is limited to 0.5. The results shown in this work pave the way to the design of resonators for efficient flexural wave absorption., The authors thank Mathieu Secail-Geraud and Julien Nicolas for the development of the experimental set-up. The work has been founded by the RFI Le Mans Acoustic (Region Pays de la Loire) within the framework of the Metaplaque project. This article is based upon work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). The work was partly supported by the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2 and by project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interpretation of the Acoustic Black Hole effect based on the concept of critical coupling

  • Leng, J.
  • Pelat, A.
  • Groby, J.P.
  • GAUTIER, FRANÇOIS
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] An Acoustic Black Hole (ABH) in a one-dimensional (1D) beam is a passive vibration damping device based on a local reduction of the beam thickness attached to a thin layer of attenuating material. This work aims at revisiting the ABH effect by analysing the ABH trapped modes in the complex frequency plane. This analysis relies on an analytical model based on the one-dimensional thin beam theory and the transfer matrix method which assumes that the ABH termination is discretised by constant thickness piecewise elements. The model is validated with numerical simulations by the Finite Element Method. The reflection coefficients of several ABH terminations are studied. The results show that an ABH presents an infinite number of modes associated to an infinite number of poles and zeros of the reflection coefficient, the density and quality factor of which depend on the order of the ABH profile. By considering the ABH termination as an open lossy resonator, its damping efficiency results therefore from a balance between the energy leakage of each mode and its inherent losses, known as the critical coupling condition. In particular, the broadband absorption of the vibration energy is achieved for frequencies higher than that of the mode that is critically coupled. This type of analysis is used to interpret the ABH effect. It provides the losses needed to obtain the critical coupling condition, and is suitable for the optimisation of one-dimensional ABH terminations. (C) 2020 Elsevier Ltd. All rights reserved., This work has been funded by the RFI Le Mans Acoustic (Region Pays de la Loire) within the framework of the Metaplaque project. This article is based on work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). This work was partly supported by the Spanish Ministry of Economy and Innovation (MINECO), by the European Union FEDER through project FIS2015-65998-C2-2, by the project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana and by the project eTNAA ANR-17-CE08-0035-01 (projet ANR 2017-2010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reflection of sound by Sonic Crystals: an application to the aerospace engineering

  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Salmerón-Contreras, L. J.
  • Herrero-Durá, Iván
  • Staliunas, K.
[EN] From the acoustical point of view one of the most extreme events is the lift-off of a rocket. In such events, an enormous amount of energy is liberated in the form of acoustic waves that are reflected in the launch pad, coming back over the rocket and affecting both the rocket and the load contained in the fairing. Here we propose a possible solution to reduce the sound pressure level in the area of the spacecraft-launcher: placing structures based on Sonic Crystals (SCs) at the launch pad to control waves reflecting on it. In this work preliminary reults, in linear regime and without considering dissipation, about the use of SCs to control the reflected waves in a broadband range of frequencies are presented. This proof of concept is experimentally tested in a sub-scale system, that works at ultrasonic frequencies in water. Different types of SCs and different geometries of the reflecting backing are tested. In particular, geometries that mimic that of the VEGA's launch pad of the European Space Agency (ESA)., Authors acknowledge the support of the European Space Agency under contract "Sonic Crystals For Noise Reduction At The Launch Pad" ESA ITT 1-7094 (ITI) and the 441-2015 Co-Sponsored PhD "Acoustic Reduction Methods for the Launch Pad". The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defect reconstruction by non-destructive testing with laser induced ultrasonic detection

  • Selim, Hossam
  • Delgado-Prieto, Miguel
  • Trull, Jose
  • Romeral, Luis
  • Cojocaru, Crina
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] This work envisages a detailed study of two-dimensional defect localization and reconstruction, using laser generated ultrasound and its application as a remotely controlled non-destructive testing method. As an alternative to full ultrasonic or full optical approaches, we propose a hybrid configuration where ultrasound is generated by impact of laser pulses, while the detection is done with conventional transducers. We implement this approach for defect reconstruction in metallic elements and show that it combines advantages of both photonic and ultrasonic devices, reducing the drawbacks of both methods. We combine our experimental results with a high-resolution signal processing procedure based on the synthetic aperture focusing technique for the benefit of the final two-dimensional visualization of the defects., The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-1 and FIS2015-65998-C2-2 and by project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The finite-element time-domain method for elastic band-structure calculations

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Krattiger, Dimitri
  • Hussein, Mahmoud Ismail
[EN] The finite-element time-domain method for elastic band-structure calculations is presented in this paper. The method is based on discretizing the appropriate equations of motion by finite elements, applying Bloch boundary conditions to reduce the analysis to a single unit cell, and conducting a simulation using a standard time-integration scheme. The unit cell is excited by a wide-band frequency signal designed to enable a large number of modes to be identified from the time-history response. By spanning the desired wave-vector space within the Brillouin zone, the band structure is then robustly generated. Bloch mode shapes are computed using the well-known concept of modal analysis, especially as implemented in an experimental setting. The performance of the method is analyzed in terms of accuracy, convergence, and computation time, and is compared to the finite-difference time-domain method as well as to a direct finite-element (FE) solution of the corresponding eigenvalue problem. The proposed method is advantageous over FD-based methods for unit cells with complex geometries, and over direct FE in situations where the formulation of an eigenvalue problem is not straightforward. For example, the new method makes it possible to accurately solve a time-dependent Bloch problem, such as the case of a complex unit cell model of a topological insulator where an internal fluid flow or other externally controlled physical fields are present. (C) 2018 Elsevier B.V. All rights reserved., A.C. is grateful for the support of Programa de Ayudas de Investigacion y Desarrollo (PAID) and Programa de Movilidad e Internacionalizacion Academica (PMIA-2013) of the UPV. This research was partially funded by the funded by the Ministerio de Economia e Innovacion (MINECO), Spain through project FIS2015-65998-C2-2-P, and partially funded by the National Science Foundation (NSF), USA through grant number 1538596. The authors acknowledge Dr. Noe Jimenez for fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Formation of high-order acoustic Bessel beams by spiral diffraction gratings

  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Romero García, Vicente
  • Staliünas, Kestutis
The formation of high-order Bessel beams by a passive acoustic device consisting of an Archimedes' spiral diffraction grating is theoretically, numerically, and experimentally reported in this paper. These beams are propagation-invariant solutions of the Helmholtz equation and are characterized by an azimuthal variation of the phase along its annular spectrum producing an acoustic vortex in the near field. In our system, the scattering of plane acoustic waves by the spiral grating leads to the formation of the acoustic vortex with zero pressure on axis and the angular phase dislocations characterized by the spiral geometry. The order of the generated Bessel beam and, as a consequence, the size of the generated vortex can be fixed by the number of arms in the spiral diffraction grating. The obtained results allow for obtaining Bessel beams with controllable vorticity by a passive device, which has potential applications in low-cost acoustic tweezers and acoustic radiation force devices., We acknowledge financial support from MINECO of the Spanish Government under Grants No. MTM2012-36740-C02-02, No. FIS2015-65998-C2-1-P, and No. FIS2015-65998-C2-2-P. N.J. acknowledges financial support from PAID-2011 Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound absorption of textile fabrics doped with microcapsules

  • Atiénzar-Navarro, Roberto
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
  • del Rey, Romina|||0000-0001-5907-0677
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The use of microcapsules is increasing in the textile industry and play an important role in the field of acoustical porous materials in order to adopt solutions for the control of noise. In this work, we present an experimental study of the acoustic effect of woven textile fabrics doped with microcapsules by using the padding technique. For this purpose, measurements with the fabric backed by an air-cavity or by a rigid wall in the impedance tube have been done. A comparative analysis of acoustic effect by using cotton fabrics with the same yarn density but different doping percentage is presented. We have investigated the influence of the sound damping effect of doping six different textile woven fabrics with the same concentration of microcapsules. The results show that the variation on the sound absorption coefficient of doped woven fabrics depends on the type of fabric, the concentration of microcapsules and the experimental setup., Authors acknowledge the support of the Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2 and by projects AICO/2016/060 and ACIF/2017/073 by Regional Ministry of Education, Culture and Sport of the Generalitat Valenciana and with the support of European Structural Investment Funds (ESIF-European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound absorption of doped cotton textile fabrics with microcapsules

  • Atiénzar-Navarro, Roberto
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
  • del Rey, Romina|||0000-0001-5907-0677
  • Picó Vila, Rubén|||0000-0003-3537-9658
[ES] El desarrollo de nuevos tejidos textiles con microcápsulas depositadas en sus fibras está en auge dentro de la industria textil. El objetivo de este estudio se centra en analizar la influencia del dopaje de diferentes tejidos textiles de algodón con microcápsulas en el coeficiente de absorción sonora. Para determinar las propiedades acústicas de los nuevos materiales de absorción sonora, se utilizaron técnicas clásicas para la caracterización de materiales: el coeficiente de absorción sonora en incidencia normal y la resistencia al flujo de aire basada en el trabajo de Ingard&Dear. Se presenta un análisis comparativo entre la absorción sonora de tejidos de algodón con la misma densidad de hilo y diferente concentración de microcápsulas y diferentes densidades de hilo con el mismo porcentaje de dopaje. Los resultados muestran que la concentración de microcápsulas en correlación con la densidad de hilo tiene una influencia significativa en el coeficiente de absorción sonora., [EN] The development of new textile fabrics with microcapsules deposited on their fibers is on the rise within the textile industry. The aim of this study is focused on analyzing the influence of doping different cotton textile fabrics with microcapsules on the sound absorption coefficient. In order to determine the acoustic properties of the new sound absorbing materials, classical techniques for materials characterization were used: the sound absorption coefficient at normal incidence and the airflow resistance based on the Ingard&Dear work. A comparative analysis between the acoustic absorption of cotton fabrics with the same yarn density and different concentration of microcapsules and different yarn densities with the same doping percentage is presented. Results show that the concentration of microcapsules in correlation with the yarn density has a significant influence in the sound absorption coefficient., Authors acknowledge the support of the Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2 and by projects AICO/2016/060 and ACIF/2017/073 by Regional Ministry of Education, Culture and Sport of the Generalitat Valenciana and with the support of European Structural Investment Funds (ESIF-European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modulated-nonlinearity in phononic crystals: From extremely linear to effective cubic nonlinear media

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Tournat, Vincent
[EN] In solids, the constitutive relations between strain and stress lead in most cases to a dominant quadratic nonlinear response. However, there exist some solid materials that exhibit negative quadratic nonlinearity, as occurs in common glasses as borosilicate glass or fused silica. In this work, we present the dynamical response of a phononic crystal with modulated nonlinearity. In particular, we analyze a 1D phononic crystal composed of layers of alternating properties with quadratic nonlinearity, each layer presenting an alternating (positive and negative) nonlinear parameter value. First, we observe that the common distortion produced by the nonlinear steepening can be almost compensated. Thus, the propagation through the phononic crystal can be extended far beyond the shock formation distance, avoiding common saturation effects. Second, we show that in the absence of dispersion the artificial material exhibits weakly-cubic nonlinear effective properties. The structure presented here can be employed to avoid nonlinear distortion in waveguides, or to design metamaterials with effective cubic nonlinear properties using quadratic nonlinear building blocks., The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2. NJ acknowledge financial support from Generalitat Valenciana through grant APOSTD-2017-042
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Asymmetric propagation using enhanced self-demodulation in a chirped phononic crystal

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Romero García, Vicente
Asymmetric propagation of acoustic waves is theoretically reported in a chirped phononic crystal made of the combination of two different nonlinear solids. The dispersion of the system is spatially dependent and allows the rainbow trapping inside the structure. Nonlinearity is used to activate the self-demodulation effect, which is enhanced due to the particular dispersion characteristics of the system. The performed numerical study reveals an efficient generation of the demodulated wave, up to 15% in terms of the pressure amplitude, as well as strong attenuation for undesired frequency components above the cut-off frequency. The obtained energy rectification ratio is in the order of 104 for the whole range of amplitudes employed in this work, indicating the robustness of the asymmetry and non-reciprocity of the proposed device for a wide operational range. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)., This work was supported by Ministerio de Economa y Competitividad (Spain) and European Union FEDER through project FIS2015-65998-C2-2-P, and by PROPASYM project funded by the Region Pays-dela-Loire and by project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana. NJ acknowledges financial support from PAID-2011 of the Universitat Politcnica de Valncia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound Absorption Properties of Perforated Recycled Polyurethane Foams Reinforced with Woven Fabric

  • Atiénzar-Navarro, Roberto
  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The acoustic properties of recycled polyurethane foams are well known. Such foams are used as a part of acoustic solutions in different fields such as building or transport. This paper aims to seek improvements in the sound absorption of these recycled foams when they are combined with fabrics. For this aim, foams have been drilled with cylindrical perforations, and also combined with different fabrics. The effect on the sound absorption is evaluated based on the following key parameters: perforation rate (5% and 20%), aperture size (4 mm and 6 mm), and a complete perforation depth. Experimental measurements were performed by using an impedance tube for the characterization of its acoustic behavior. Sound absorption of perforated samples is also studied¿numerically by finite element simulations, where the viscothermal losses were considered; and analytically by using models for the perforated foam and the fabric. Two textile fabrics were used in combination with perforated polyurethane samples. Results evidence a modification of the sound absorption at mid frequencies employing fabrics that have a membrane-type acoustic response., This research was financially supported by the Ministry of Economy and Innovation (MINECO) and the European Union FEDER through project FIS2015-65998-C2-2 and by projects AICO/2016/060 and ACIF/2017/073 by Regional Ministry of Education, Culture and Sport of the Generalitat Valenciana and with the support of European Structural Investment Funds (ESIF-European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonlinear dispersive waves in repulsive lattices

  • Mehrem, Ahmed
  • Salmerón-Contreras, L. J.
  • García-Andrés, Francesc Xavier
  • Jimenez, Noe|||0000-0002-6539-670X
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] The propagation of nonlinear waves in a lattice of repelling particles is studied theoretically and experimentally. A simple experimental setup is proposed, consisting of an array of coupled magnetic dipoles. By driving harmonically the lattice at one boundary, we excite propagating waves and demonstrate different regimes of mode conversion into higher harmonics, strongly influenced by dispersion and discreteness. The phenomenon of acoustic dilatation of the chain is also predicted and discussed. The results are compared with the theoretical predictions of $\alpha$-FPU equation, describing a chain of masses connected by nonlinear quadratic springs and numerical simulations. The results can be extrapolated to other systems described by this equation., The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through Project No. FIS2015- 65998-C2-2 and by Project No. AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana. L.J.S.-C. gratefully acknowledge the support of PAID-01-14 at Universitat Politscnica de Valsncia. A. M. gratefully acknowledge to Generalitat Valenciana (Santiago Grisolia program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Fabric Folding Geometry on the Sound Absorption

  • Atiénzar-Navarro, Roberto
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • del Rey, Romina|||0000-0001-5907-0677
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Bou-Belda, Eva|||0000-0003-1461-9296
[EN] Textile materials used without any other structures show low absorption throughout the operating frequency range, and they are currently used for interior decoration. These fabrics can play an important role in the development of acoustic materials considering folding techniques in the design phase. The folding of a cotton fabric not only affects the esthetic appearance but also directly influences the total absorption surface and the volumetric density. The aim of this research was to establish the influence of geometric design parameters, such as the number of folds and the textile length on the sound absorption properties. Experimental measurements were performed by using an impedance tube considering only incident plane waves. The diffuse-field sound absorption coefficient of several fabric configurations placed in front of a rigid backing forming an air-cavity between them was also measured in the small-sized reverberation chamber. A semi-empirical model based on the spacing between the fabric to the backing wall and the folding geometry was used in order to predict the diffuse-field sound absorption in reverberation room. Results showed a very good agreement between measured and predicted sound absorption coefficients., This research was financially supported by the Ministry of Economy and Innovation (MINECO) and the European Union FEDER through project FIS2015-65998-C2-2 and by project ACIF/2017/073 by Regional Ministry of Education, Culture and Sport of the Generalitat Valenciana and with the support of European Structural Investment Funds (ESIFEuropean Union);European Structural Investment Funds [ACIF/2017/073]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Gap Solitons in acoustic layered media

  • Salmerón Contreras, Luis José
  • Mehrem, Ahmed
  • Staliunas, K.
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] In this work we study numerically the existence of gap solitons in an acoustic media. To approach the problem a set of coupled-mode equations are given. In order to obtain a solitary wave in a real media, it is necessary of two phenomena, dispersion and nonlinearity. Acoustic media, usually can present nonlinearity but also low dispersions. To increase dispersion, it is proposed to use a multi-layered medium, a kind of sonic crystal in 1D, that it is demonstrated to have high dispersion near some frequency bands. In this kind of media, it is possible to observe soliton waves, This research was partially supported by Ministerio de Economía y ompetitividad under grant FIS2015-65998-C2-2. LJSC and AM acknowledge UPV for redoctoral contract FPI-Subprograma 1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sharp acoustic vortex focusing by Fresnel-spiral zone plates

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Staliunas, Kestutis
[EN] We report the optimal focusing of acoustic vortex beams by using flat lenses based on a Fresnelspiral diffraction grating. The flat lenses are designed by spiral-shaped Fresnel zone plates composed of one or several arms. The constructive and destructive interferences of the diffracted waves by the spiral grating result in sharp acoustic vortex beams, following the focal laws obtained in analogy with the Fresnel zone plate lenses. In addition, we show that the number of arms determines the topological charge of the vortex, allowing the precise manipulation of the acoustic wave field by flat lenses. The experimental results in the ultrasonic regime show excellent agreement with the theory and full-wave numerical simulations. A comparison with beam focusing by Archimedean spirals also showing vortex focusing is given. The results of this work may have potential applications for particle trapping, ultrasound therapy, imaging, or underwater acoustic transmitters., This work was supported by the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through Project Nos. FIS2015-65998-C2-1 and FIS2015-65998-C2-2. N.J. acknowledges financial support from Generalitat Valenciana through Grant No. APOSTD-2017-042.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband quasi perfect absorption using chirped multi-layer porous materials

  • Jimenez, Noe|||0000-0002-6539-670X
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Romero García, Vicente
This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses, the system is designed to have broadband unidirectional and quasi perfect absorption. The transfer and scattering matrix formalism, together with numerical simulations based on the finite element method are used to demonstrate the results showing excellent agreement between them. The proposed system allows to construct broadband sound absorbers with improved absorption in the low frequency regime using less amount of material than the complete bulk porous layer. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)., This work has been funded by the Metaudible project ANR-13-BS09-0003, co-funded by ANR and FRAE, and also by Ministerio de Economia y Competitividad (Spain) and European Union FEDER through project FIS2015-65998-C2-2-P. We acknowledge project AICO/2016/060 by Consellera de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Acoustic behavior of the VEGA launch pad environment

  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Herrero-Durá, Iván
  • Salmerón-Contreras, L. J.
[EN] The acoustic pressure levels experienced by the spacecraft and launchers during the lift-off is due among other factor by the reflection of the sound waves on the launch pad. The acoustic load distribution in the area of the launcher depends on the geometric, mechanical and acoustic characteristics of the ground facilities. This work is intended to study the acoustic environment of the launch pad. A numerical and experimental investigation is developed in order to study in the linear regime the acoustic behaviour of a subscale model of the VEGA's launch pad. The acoustic measurements are performed in an anechoic chamber using an electroacoustic source that emits incoherent noise, mimicking the real acoustic source. The acoustic pressure field is measured at different positions in front of the launch pad mock-up, in the area where the acoustic waves are reflected. Among the future perspectives of this work is to study and develop new methods for the mitigation of the sound pressure levels., Authors acknowledge the support of the European Space Agency under contract ¿Sonic Crystals For Noise Reduction At The Launch Pad¿ ESA ITT 1-7094 (ITI) and the 441-2015 Co-Sponsered PhD ¿Acoustic Reduction Methods for the Launch Pad¿. The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2. Authors aknowledge Dhéric Mutel, Cyril Bernard and Clément Jost for their contribution to this work
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy localization and shape transformations in semiflexible polymer rings

  • Gaididei, Yu. B.
  • Archilla, J. F. R.
  • Gorria, Carlos
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
Shape transformations in driven and damped molecular chains are considered. Closed chains of weakly coupled molecular subunits under the action of spatially homogeneous time-periodic external field are studied. The coupling between the internal excitations and the bending degrees of freedom of the chain modifies the local bending rigidity of the chain. In the absence of driving the array takes a circular shape.When the energy pumped into the system exceeds some critical value the chain undergoes a nonequilibrium phase transition: The circular shape of the aggregate becomes unstable and the chain takes the shape of an ellipse or, in general, of a polygon. The excitation energy distribution becomes spatially nonuniform: It localizes in such places where the chain is more flat. The weak interaction of the chain with a flat surface restricts the dynamics to a flat manifold., Y.B.G. acknowledges partial financial support from a special program of the National Academy of Sciences of Ukraine, and is thankful to the Department of Applied Mathematics and Computer Science and the Department of Physics, Technical University of Denmark as well as the University of Seville for hospitality. J.F.R.A acknowledges Grant No. 2011/FQM-280 from CEICE, Junta de Andalucia Spain. J.F.R.A. and V.J.S.-M. acknowledge financial support from Project No. FIS2015-65998-C2-2-P from MINECO, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solitary waves in nonlinear phononic crystals

  • Mehrem, A.
  • Salmerón-Contreras, L. J.
  • Staliunas, K.
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] We discuss two possible regimes of solitary wave formation in acoustic layered media. In the weakly dispersive limit, KdV-type solitons are formed, consisting of broad pulses with a width much larger than the lattice periodicity. Such KdV solitons are shown to exist even far from the weakly dispersive conditions. On the other hand, in the strongly dispersive regime, gap acoustic solitons are demonstrated. They are formed by a fast carrier wave inside the band-gap of the structure, near the Bragg frequency (whose propagation is not allowed in the case of linear waves), modulated by a wide envelope, whose width lies inside the gap. Gap solitons propagate slower than linear waves, or can be even reach a stationary non-propagating state within the medium. The parameters for a realistic acoustic medium supporting both types of solitary waves are discussed, The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband reduction of the specular reflections by using sonic crystals: A proof of concept for noise mitigation in aerospace applications

  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Salmerón-Contreras, L.J.
  • Herrero-Durá, Iván
  • Staliunas, Kestutis
  • Adkins, N.J.
[EN] The broadband reduction of the specular reflections by sonic crystals (SCs) is theoretically and experimentally reported in this work. The analysed system consists of a sound source radiating a SC made of acoustically rigid scatterers embedded in water partially covering an open cavity. By comparison with a reference flat reflector, we observe that reflected waves spread in space as a consequence of the spatially modulated properties of the SC. Moreover, due to the different working frequency ranges of the SC a significant noise reduction is produced in a broadband region. Therefore, due to the spreading of the reflected waves, the system produces a broadband noise reduction in the area of the source. In particular, the noise reduction is close to 2 dB for the two octaves emitted by our source, which represents a decrease of 37% of the acoustic energy. The results shown in this work constitute a proof of concept for the use of SCs as broadband-noise reduction systems at the launch pad. An approach to the geometry of the Vega launch vehicle the European Space Agency is proposed and the limitations of the study are discussed. (C) 2017 Elsevier Masson SAS. All rights reserved., Authors acknowledge the support of the European Space Agency under contract "Sonic Crystals For Noise Reduction At The Launch Pad", ESA ITT 1-7094 (ITI) and the 441-2015 Co-Sponsored PhD "Acoustic Reduction Methods for the Launch Pad". The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-1 and FIS2015-65998-C2-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Second harmonic propagation in Coupled Oscillators

  • Mehrem, Ahmed
  • Salmerón Contreras, Luis José
  • García-Andrés, Francesc Xavier
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • García-Raffi, L. M.|||0000-0003-3985-8453
[EN] In this work, we studied numerically, analytically and experimentally the nonlinear dynamics for a chain of magnates. Propagation the second harmonic depends on the medium parameters and the excitation signal (amplitude and frequency). From the experimental results which have a good agreement with the theoretical results, several phenomenons in nonlinear behavior can be study. The experiment also shows the generation of subharmonics., This research was partially supported by Ministerio de Economía y ompetitividad under grant FIS2015-65998-C2-2. LJSC and AM acknowledge UPV for predoctoral contract FPI-Subprograma 1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Absorción acústica de nuevos tejidos textiles

  • Atiénzar-Navarro, Roberto
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • del Rey, Romina|||0000-0001-5907-0677
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
[ES] El presente estudio tiene como objetivo poder evaluar nuevos materiales absorbentes de sonido provenientes de la ingeniería textil. Para la caracterización del comportamiento acústico de los tejidos textiles se hace uso del tubo de Kundt: por una parte, se hace una campaña de mediciones de coeficiente de absorción sonora a incidencia normal; por otra, se realizan mediciones de resistencia al flujo basado en el trabajo de Ingard&Dear. Se presenta un análisis comparativo entre la absorción acústica de las telas no dopadas, con las mismas, dopadas con microcápsulas antimicrobianas. Además, se hace uso de un plenum con objeto de mejorar la absorción acústica de estos tejidos., [EN] The aim of this study is to evaluate new sound absorbing materials from the textile engineering. For the characterization of the acoustic behavior of the textile fabrics, the Kundt tube is used: on the one hand, a campaign of sound absorption coefficient measurements are made at normal incidence; on the other hand, flow resistance measurements are made based on Ingard & Dear work. A comparative analysis is presented between the acoustic absorption of non-doped fabrics with the same doped with antimicrobial microcapsules. In addition, a plenum is used in order to improve the acoustic absorption of these fabrics, Este trabajo está subvencionado por el Ministerio de Economía e Innovación (MINECO) y por el Fondo Europeo (FEDER) a través del proyecto FIS2015-65998-C2-2 y por los proyectos GVA AICO/2016/060 y ACIF/2017/073 por la Consellería de Educación, Investigación, Cultura y Deporte de la Generalitat Valenciana.