Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interpretation of the Acoustic Black Hole effect based on the concept of critical coupling

  • Leng, J.
  • Pelat, A.
  • Groby, J.P.
  • GAUTIER, FRANÇOIS
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] An Acoustic Black Hole (ABH) in a one-dimensional (1D) beam is a passive vibration damping device based on a local reduction of the beam thickness attached to a thin layer of attenuating material. This work aims at revisiting the ABH effect by analysing the ABH trapped modes in the complex frequency plane. This analysis relies on an analytical model based on the one-dimensional thin beam theory and the transfer matrix method which assumes that the ABH termination is discretised by constant thickness piecewise elements. The model is validated with numerical simulations by the Finite Element Method. The reflection coefficients of several ABH terminations are studied. The results show that an ABH presents an infinite number of modes associated to an infinite number of poles and zeros of the reflection coefficient, the density and quality factor of which depend on the order of the ABH profile. By considering the ABH termination as an open lossy resonator, its damping efficiency results therefore from a balance between the energy leakage of each mode and its inherent losses, known as the critical coupling condition. In particular, the broadband absorption of the vibration energy is achieved for frequencies higher than that of the mode that is critically coupled. This type of analysis is used to interpret the ABH effect. It provides the losses needed to obtain the critical coupling condition, and is suitable for the optimisation of one-dimensional ABH terminations. (C) 2020 Elsevier Ltd. All rights reserved., This work has been funded by the RFI Le Mans Acoustic (Region Pays de la Loire) within the framework of the Metaplaque project. This article is based on work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). This work was partly supported by the Spanish Ministry of Economy and Innovation (MINECO), by the European Union FEDER through project FIS2015-65998-C2-2, by the project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana and by the project eTNAA ANR-17-CE08-0035-01 (projet ANR 2017-2010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal absorption of flexural energy in thin plates by critically coupling a locally resonant grating

  • Leng, J.
  • Gautier, F.
  • Pelat, A.
  • Groby, J. -P.
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The optimal absorption of flexural energy by the critical coupling of a locally resonant grating embedded in a thin plate is reported in this work for the reflection and transmission problems. The grating is made of a 1D-periodic array of local resonators. A viscoelastic coating is also placed on top of each resonator to control the intrinsic losses of the system. The scattering matrices for the propagative waves of both problems are obtained by means of the Layered Multiple Scattering Theory and validated by the Finite Element Method. In this work, we find that the perfect absorption can be obtained in the reflection problem and the maximal absorption in the transmission problem is limited to 50% by tuning the losses only. These results agree with the theoretical predictions since the eigenvalues reduce to the reflection coefficient in the reflection problem and only one of the two eigenvalues of the scattering matrix is critically coupled in the transmission problem. These results highlight the adaptability of the critical coupling method to optimize the absorption of locally resonant materials for flexural waves in 2D transmission and reflection problems, and pave the way to the design of resonators for efficient flexural wave absorption., This work has been funded by the RFI Le Mans Acoustique (Region Pays de la Loire) within the framework of the MetaplaQ project. This article is based upon work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). This work was partly supported by the project HYPERMETA funded under the program Etoiles Montantes de la Region Pays de la Loire and by the project eTNAA ANR-17-CE08-0035-01 (projet ANR 2017-2021). The authors also acknowledge support from the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project PID2019-109175GB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of bending wave reflection at beam terminations by thermally tunable subwavelength resonators

  • Raybaud, Guillaume
  • Ouisse, Morvan
  • Leng, Julien
  • Pelat, Adrien
  • Groby, Jean Philippe
  • Gautier, François
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The perfect absorption of bending waves by thermally tunable subwavelength absorbers is analytically and experimentally demonstrated in this work for a reflection problem in beams. These absorbers are local resonators located at the end of a semi-infinite beam and consist of thin blades covered with a layer of Shape Memory Polymer (SMP), the stiffness and damping of which strongly depend on the temperature. The resonators therefore present both energy leakage from the absorbers to the beam and inherent losses thanks to the presence of the SMP. In particular, the situation in which the inherent losses balances the energy leakage is known as the critical coupling conditions and leads to the perfect absorption of the incident wave in the reflection problem. It is shown that these conditions can be simultaneously fulfilled for the different blades of the resonating system by tuning the temperature of the SMP and the geometry of the blades. The analytical results are based on the Impedance Matrix Method. The experimental validation highlights the possibility of achieving multi-frequency subwavelength absorption in the case of multi-blades configurations., The work has been founded by the Agence Nationale de la Recherche, France in the framework of the project eTNAA (ANR-17-CE08-0035-01, 2017-2021). This work also has been supported by the EIPHI Graduate school, France (contract ``ANR17-EURE-0002''). Jean-Philippe Groby and Vicent Romero-Garcia acknowlegde the financial support of the ANR-RGC METARoom, France (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire, France.