Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measuring the Weather s Impact on MAC Layer Over 2.4 GHz Outdoor Radio Links

  • Bri Molinero, Diana
  • García Pineda, Miguel
  • Jelena Misic
  • Lloret, Jaime|||0000-0002-0862-0533
The weather s impact on the performance of a radio link at the 2.4 GHz ISM (Industry, Scientific and Medical) band had not been yet studied in great detail up to now as it is generally believed that the ultra-high frequency band is not significantly affected by weather conditions. However, our study shows significant correlations between meteorological variables and control frame errors at MAC (Medium Access Control) layer of the IEEE 802.11b/g standard. This study is performed over an outdoor radio link setting which has been monitored for several months. Moreover, we check if link distance and so modulation scheme and data rate are also decisive features of such impact. Our real scenario is composed of a point-to-multipoint link, one longer distance s than the other one. Finally, we conclude that the weather impacts on the number of control frame errors, and so it should be taken into account to design and deploy outdoor radio links IEEE 802.11b/g. Moreover, we have showed that such impact depends on data rate and modulation scheme., This work has been supported in part by the Vicerrectorado de Investigacion, Innovacion y Transferencia of the Universitat Politecnica de Valencia (UPV) through the Programa de Movilidad e Internalizacion Academica (PMIA-2013) thanks the Programa Campus de Excelencia Internacional (VLC/CAMPUS) funded by the Ministerio de Educacion, Cultura y Deporte of Spain, and by the same Vicerrectorado through the Programa para la Formacion de Personal Investigador (FPI) subprograma 1. The authors would like to thank the Information and Communications Systems Office (ASIC) of the UPV for supporting the setting of this work, Borja Opticos Enterprise for providing meteorological data and Azimut Electronics Company for allowing us to use its head office as a point link.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tribocorrosion Mechanisms of Ti6Al4V in Artificial Saliva by Zero-Resistance Ammetry (ZRA) Technique

  • Licausi, Marie-Pierre
  • Igual Muñoz, Anna Neus
  • Espallargas, N.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Degradation mechanisms of biomedical alloys involve two different phenomena, corrosion and wear, which simultaneously act and may cause the failure of implants and prosthesis. In this work, tribocorrosion of Ti6Al4V biomedical alloy in artificial saliva is studied at open circuit potential (OCP) by a new electrochemical technique that allows measuring the galvanic potential and current between the wear track (anode) and the passive material (cathode) through zero-resistance ammetry. The experimental set-up was conceived for physically separating the depassivated area from the passive material, thus allowing to quantify the mechanically activated corrosion at OCP. Two different counterparts, SiC and Al2O3, were used against the Ti6Al4V alloy in order to analyse the influence of the initial contact pressure on the tribocorrosion mechanisms. A galvanic model based on the cathodic reaction kinetics can describe the current and the potential evolution with time during sliding. It has been observed that at the highest initial contact pressures, wear follows the Archard law, while at lower contact pressures, third body appeared and wear can not be described by the Archard law. Quantification of the evolution of the depassivated wear track with time was obtained and the deviation from the Archard predictions was analysed., The authors would like to thank the financial support from NTNU (Project Number 69450741) for performing the experiments of this work and Universitat Politècnica de Valencia VLC/Campus (PMIA-2013) for the mobility Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The finite-element time-domain method for elastic band-structure calculations

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Krattiger, Dimitri
  • Hussein, Mahmoud Ismail
[EN] The finite-element time-domain method for elastic band-structure calculations is presented in this paper. The method is based on discretizing the appropriate equations of motion by finite elements, applying Bloch boundary conditions to reduce the analysis to a single unit cell, and conducting a simulation using a standard time-integration scheme. The unit cell is excited by a wide-band frequency signal designed to enable a large number of modes to be identified from the time-history response. By spanning the desired wave-vector space within the Brillouin zone, the band structure is then robustly generated. Bloch mode shapes are computed using the well-known concept of modal analysis, especially as implemented in an experimental setting. The performance of the method is analyzed in terms of accuracy, convergence, and computation time, and is compared to the finite-difference time-domain method as well as to a direct finite-element (FE) solution of the corresponding eigenvalue problem. The proposed method is advantageous over FD-based methods for unit cells with complex geometries, and over direct FE in situations where the formulation of an eigenvalue problem is not straightforward. For example, the new method makes it possible to accurately solve a time-dependent Bloch problem, such as the case of a complex unit cell model of a topological insulator where an internal fluid flow or other externally controlled physical fields are present. (C) 2018 Elsevier B.V. All rights reserved., A.C. is grateful for the support of Programa de Ayudas de Investigacion y Desarrollo (PAID) and Programa de Movilidad e Internacionalizacion Academica (PMIA-2013) of the UPV. This research was partially funded by the funded by the Ministerio de Economia e Innovacion (MINECO), Spain through project FIS2015-65998-C2-2-P, and partially funded by the National Science Foundation (NSF), USA through grant number 1538596. The authors acknowledge Dr. Noe Jimenez for fruitful discussions.