Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scattering Evaluation of Equivalent Surface Impedances of Acoustic Metamaterials in Large FDTD Volumes Using RLC Circuit Modelling

  • Ballestero, Eric
  • Hamilton, Brian
  • Romero-García, Vicent
  • Groby, Jean Philippe
  • Aygun, Haydar
  • Dance, Stephen
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Most simulations involving metamaterials often require complex physics to be solved through refined meshing grids. However, it can prove challenging to simulate the effect of local physical conditions created by said metamaterials into much wider computing sceneries due to the increased meshing load. We thus present in this work a framework for simulating complex structures with detailed geometries, such as metamaterials, into large Finite-Difference Time-Domain (FDTD) computing environments by reducing them to their equivalent surface impedance represented by a parallel-series RLC circuit. This reduction helps to simplify the physics involved as well as drastically reducing the meshing load of the model and the implicit calculation time. Here, an emphasis is made on scattering comparisons between an acoustic metamaterial and its equivalent surface impedance through analytical and numerical methods. Additionally, the problem of fitting RLC parameters to complex impedance data obtained from transfer matrix models is herein solved using a novel approach based on zero crossings of admittance phase derivatives. Despite the simplification process, the proposed framework achieves good overall results with respect to the original acoustic scatterer while ensuring relatively short simulation times over a vast range of frequencies., The collaboration between the authors of this article was made possible thanks to European Cooperation in Science and Technology (COST) Action CA15125 -Design in Noise Reducing Materials (DENORMS). This study was financed by the Royal Opera House, Covent Garden, and the United Kingdom Acoustics Network (UKAN). The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities through grant "Juan de la Cierva-Incorporacion" (IJC2018-037897-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental characterization of rigid-scatterer hyperuniform distributions for audible acoustics

  • Chéron, Élie
  • Groby, Jean Philippe
  • Pagneux, Vincent
  • Félix, Simon
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The wave transport properties of two-dimensional stealthy hyperuniform distributions of rigid scatterers embedded in a waveguide are experimentally characterized for scalar waves in airborne audible acoustics. The nonresonant nature of the scatterers allows us to directly link these properties to the geometric distribution of points through the structure factor. The transport properties are analyzed as a function of the stealthiness x of their hyperuniform point pattern and compared to those of a disordered material in the diffusive regime, which are characterized by the Ohm's law through both the classical mean free path and the corrected mean free path by the collective approximation considering the effects of correlation. Different scattering regimes are theoretically and numerically identified showing transparent regions, isotropic band gaps, and anisotropic scattering depending on x. The robustness of these scattering regimes to losses, which are unavoidable in audible acoustics is experimentally unveiled., This work has been funded by the project HYPERMETA funded under the program Étoiles Montantes of the Région Pays de la Loire and by the ANR-RGC METARoom (ANR-18-CE08-0021) project. This publication is part of the R&D&I Project/Grant No. PID2020-112759GB-I00 funded by MCIN/AEI/10.13039/501100011033/.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stealth and equiluminous materials for scattering cancellation and wave diffusion

  • Kuznetsova, S.
  • Groby, J. P.
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] We report a procedure to design two-dimensional acoustic structures with prescribed scattering properties. The structures are designed from targeted properties in the reciprocal space so that their structure factors, i.e. their scattering patterns under the Born approximation, exactly follow the desired scattering properties for a set of wavelengths. The structures are made of a distribution of rigid circular cross-sectional cylinders embedded in air. We demonstrate the efficiency of the procedure by designing two-dimensional stealth acoustic materials with broadband back-scattering suppression independent of the angle of incidence and equiluminous acoustic materials exhibiting broadband scattering of equal intensity also independent of the angle of incidence. The scattering intensities are described in terms of both single and multiple scattering formalisms, showing excellent agreement with each other, thus validating the scattering properties of each material., This work has been funded by the project Conseil Regional des Pays de la Loire HYPERMETA under the program Etoiles Montantes of the Region Pays de la Loire, by the project Agence Nationale de la Recherche ANR-RGC METARoom [grant number (ANR-18-CE08-0021)] and by the project PID2020112759GB-I00 of the Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of acoustic metamaterials made of Helmholtz resonators for perfect absorption by using the complex frequency plane

  • Romero-García, V.
  • Theocharis, G.
  • Achilleos, V.
  • Merkel, A.
  • Richoux, O.
  • Tournat, V.
  • Groby, J-P
  • Pagneux, V.
  • Jimenez, Noe|||0000-0002-6539-670X
[FR] Dans cette revue, nous présentons des résultats sur l'absorption acoustique parfaite sub-longueur d'onde faisant appel à des métamatériaux acoustiques avec des résonateurs Helmholtz pour différentes configurations. L'absorption parfaite à basse fréquence nécessite une augmentation du nombre d'états aux basses fréquences ainsi que de trouver les bonnes conditions pour une adaptation d'impédance avec le milieu environnant. Si en outre, on souhaite réduire les dimensions géométriques des structures proposées pour des questions pratiques, on peut utiliser des résonateurs locaux judicieusement conçus afin d'attendre une absorption parfaite sub-longueur d'onde. Les résonateurs de Helmholtz se sont révélés de bons candidats en raison de leur accordabilité aisée de la géométrie, donc de la fréquence de résonance, de la fuite d'énergie et des pertes intrinsèques. Lorsqu'ils sont branchés à un guide d'ondes ou à un milieu environnant, ils se comportent comme des systèmes ouverts, avec pertes et résonances caractérisés par leur fuite d'énergie et leurs pertes intrinsèques. L'équilibre entre ces deux aspects représente la condition de couplage critique et donne lieu à un maximum d'absorption d'énergie. Le mécanisme de couplage critique est ici représenté dans le plan de fréquence complexe afin d'interpréter la condition d'adaptation d'impédance. Dans cette revue, nous discutons en détail la possibilité d'obtenir une absorption parfaite par ces conditions de couplage critiques dans différents systèmes tels que la réflexion (à un port), la transmission (à deux ports) ou les systèmes à trois ports., [EN] In this review, we present the results on sub-wavelength perfect acoustic absorption using acoustic metamaterials made of Helmholtz resonators with different setups. Low frequency perfect absorption requires to increase the number of states at low frequencies and finding the good conditions for impedance matching with the background medium. If, in addition, one wishes to reduce the geometric dimensions of the proposed structures for practical issues, one can use properly designed local resonators and achieve subwavelength perfect absorption. Helmholtz resonators have been shown good candidates due to their easy tunability of the geometry, so of the resonance frequency, the energy leakage and the intrinsic losses. When plugged to a waveguide or a surrounding medium they behave as open, lossy and resonant systems characterized by their energy leakage and intrinsic losses. The balance between these two represents the critical coupling condition and gives rise to maximum energy absorption. The critical coupling mechanism is represented here in the complex frequency plane in order to interpret the impedance matching condition. In this review we discuss in detail the possibility to obtain perfect absorption by these critical coupling conditions in different systems such as reflection (one-port), transmission (two-ports) or three-ports systems., The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Étoiles Montantes of the Région Pays de la Loire. NJ acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) through grant ¿Juan de la Cierva-Incorporación¿ (IJC2018-037897- I). This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Slow sound based delay-line acoustic metamaterial

  • Malléjac, M.
  • Sheng, P.
  • Tournat, V.
  • Groby, J. P.
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] Periodic structures composed of quarter-wavelength or Helmholtz resonators have been widely used in the design of acoustic metamaterials. An interesting phenomenon achievable through hybridization in such structures is the slow sound, which results from the strong dispersion produced by the local resonances. It gives rise to many applications such as deep subwavelength sound absorbers or metadiffusers. All the applications proposed so far have been analyzed only in the frequency domain (steady state). In this work, we propose a passive treatment that can be used in room acoustics, which requires considering the time domain and all multiple reflections. We analytically design a delay line from a metasurface made of Helmholtz resonators, using slow-sound propagation. We prove numerically and experimentally that such structures can delay a pulse and thus reproduce the sound perception of a propagation over a given distance, larger than the actual size of the treatment. The limitations of real-time pulse propagation, dispersion, and losses on audio fidelity are discussed., This work is funded by the Metaroom Project No. ANR-18-CE08-0021 and co-funded by ANR and RCG.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zero-phase propagation in realistic plate-type acoustic metamaterials

  • Malléjac, M.
  • Merkel, A.
  • Christensen, J.
  • Tournat, V.
  • Groby, Jean-Philippe
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] We theoretically, numerically, and experimentally analyze the Density-Near-Zero (DNZ) regime of a one-dimensional acoustic metamaterial. This acoustic metamaterial is composed of thin elastic plates periodically clamped in an air-filled waveguide, and the effective dynamic zero mass density is obtained from the strong dispersion around the bandgaps associated with the resonances of the plates. We emphasize the importance of the impedance mismatch between the acoustic metamaterial and the surrounding waveguide at the frequency of the zero effective density in addition to the consequences of the inherent losses. As a result, the frequency of the zero phase propagation, i.e., the acoustic propagation with zero phase delay, is not exactly the frequency of the zero density and lies in the frequency bandgap where the effective density is negative. Considering these limitations, the zero phase propagation is still experimentally observed and a subwavelength acoustic dipole is numerically designed, thus demonstrating the possible realistic implementations of DNZ acoustic metamaterials., This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). This work was funded by the Metaroom Project No. ANR-18-CE08-0021 and co-funded by ANR and RCG. J. Christensen acknowledges the support from the MINECO through a Ramon y Cajal grant (Grant No. RYC-2015-17156). J. Sanchez-Dehesa acknowledges the support from the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental validation of deep-subwavelength diffusion by acoustic metadiffusers

  • Ballestero, Eric
  • Groby, J. P.
  • Dance, Stephen
  • Aygün, H.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] An acoustic metadiffuser is a subwavelength locally resonant surface relying on slow sound propagation. Its design consists of rigidly backed slotted panels, with each slit being loaded by an array of Helmholtz resonators. Due to the slow sound properties, the effective thickness of the panel can therefore be dramatically reduced when compared to traditional diffusers made of quarter-wavelength resonators. The aim of this work is to experimentally validate the concept of metadiffusers from the scattering measurements of a specific metadiffuser design, i.e., a quadratic residue metadiffuser. The experimental results reported herein are in close agreement with analytical and numerical predictions, therefore showing the potential of metadiffusers for controlling sound diffusion at very low frequencies., This article was based upon the work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). This study was financed by London South Bank University, the Royal Opera House, Covent Garden, and the United Kingdom Acoustics Network (UKAN). The authors gratefully acknowledge the ANR-RGC METARoom (No. ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the R egion Pays de la Loire. N.J. acknowledges the financial support from Generalitat Valenciana through Grant No. APOSTD/2017/042.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-locality of the Willis coupling in laminates

  • Malléjac, Matthieu
  • Cavalieri, Théo
  • Merkel, Aurélien
  • Torrent, Daniel
  • Christensen, Johan
  • Li, Jensen
  • Groby, Jean-Philippe
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The closed form expressions of the effective properties in periodic fluid laminates are derived thanks to the Pade approximation of the transfer matrix. A second-order Taylor expansion of the transfer matrix elements exhibits Willis coupling. This coupling is the sum of a local term and a nonlocal term. The nonlocal term arises from the apparent bulk modulus in quasi one-dimensional problems. The nonlocality directly impacts the governing equations modeling the acoustic wave propagation in these Willis materials, which then involve convolution products in space. As an example, a two-orthotropic porous material laminate is considered. The theoretically derived effective properties and scattering coefficients are found in excellent agreement with those numerically calculated. The Willis coupling widens the frequency range of validity and accuracy of the effective properties and thus of the calculated scattering coefficients when compared to classical homogenization results for which the Willis coupling is absent. This widening mostly relies on the effect of Willis coupling on the impedance of the fluid laminate. The effective properties are finally derived for a general laminate. (C) 2022 Elsevier B.V. All rights reserved., J.-P.G., M.M., T.C. and V.R.-G. would like to acknowledge the support of the ANR-RGC METARoom project (ANR-18-CE080021). J.L. would like to acknowledge the support of the Research Grants Council in Hong Kong (Grant No. 16302218). D.T. acknowledges financial support through the "Ramon y Cajal'' fellowship under grant number RYC-2016-21188.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wave transport in stealth hyperuniform materials: The diffusive regime and beyond

  • Chéron, Élie
  • Simon, Felix
  • Groby, Jean Philippe
  • Pagneux, Vincent
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] By varying the degree of correlation in stealthy hyperuniform (SHU) materials, the continuous evolution from uncorrelated disorder to periodic media is possible and allows us, as such, to study the fate of the bimodal distribution, the characteristic of a diffusive transport. Considering the wave transport through a SHU distribution of a given number of scatterers and at a given frequency, the transition from a diffusive to a transparent medium is clearly observed only below the Bragg frequency. This transition is characterized by a threshold value of the stealthiness at the vicinity of which the material abruptly changes from diffusive to transparent. In contrast, no such clear transition is observed at or above the Bragg frequency and, surprisingly, a seemingly bimodal distribution of the transmission eigenvalues still characterizes the SHU materials, even when strongly correlated., This work has been funded by the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire, by the ANR-RGC METARoom (No. ANR-18-CE08-0021) project. This work is also part of the R&D&I project/Grant No. PID2020-112759GB-I00 funded through No. MCIN/AEI/10.13039/501100011033/.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of bending wave reflection at beam terminations by thermally tunable subwavelength resonators

  • Raybaud, Guillaume
  • Ouisse, Morvan
  • Leng, Julien
  • Pelat, Adrien
  • Groby, Jean Philippe
  • Gautier, François
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The perfect absorption of bending waves by thermally tunable subwavelength absorbers is analytically and experimentally demonstrated in this work for a reflection problem in beams. These absorbers are local resonators located at the end of a semi-infinite beam and consist of thin blades covered with a layer of Shape Memory Polymer (SMP), the stiffness and damping of which strongly depend on the temperature. The resonators therefore present both energy leakage from the absorbers to the beam and inherent losses thanks to the presence of the SMP. In particular, the situation in which the inherent losses balances the energy leakage is known as the critical coupling conditions and leads to the perfect absorption of the incident wave in the reflection problem. It is shown that these conditions can be simultaneously fulfilled for the different blades of the resonating system by tuning the temperature of the SMP and the geometry of the blades. The analytical results are based on the Impedance Matrix Method. The experimental validation highlights the possibility of achieving multi-frequency subwavelength absorption in the case of multi-blades configurations., The work has been founded by the Agence Nationale de la Recherche, France in the framework of the project eTNAA (ANR-17-CE08-0035-01, 2017-2021). This work also has been supported by the EIPHI Graduate school, France (contract ``ANR17-EURE-0002''). Jean-Philippe Groby and Vicent Romero-Garcia acknowlegde the financial support of the ANR-RGC METARoom, France (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire, France.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wave transport in 1D stealthy hyperuniform phononic materials made of non-resonant and resonant scatterers

  • Romero-García, Vicente|||0000-0002-3798-6454
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Chéron, É.
  • Kuznetsova, S.
  • Groby, J.-P.
  • Félix, S.
  • Pagneux, V.
[EN] Stealthy hyperuniform point patterns are characterized by a vanishing spatial Fourier transform around the origin of the reciprocal vector space. The long-range point density fluctuations are suppressed as well in materials consisting of such distribution of scatterers, opening up opportunities to control waves. Beside wave transport in such structured materials are driven by several elements, such as the acoustic properties of the host material, the scatterer characteristics, i.e., dimensions or resonant features, and the scatterer distribution patterns. The effects of these three basic elements on the wave transport properties are usually hard to discriminate. In this work, we analyze the transport properties of acoustic waves in one-dimensional phononic materials constituted of either non-resonant or resonant scatterers distributed along stealthy hyperuniform patterns in air. The pattern is controlled by the stealthiness, allowing us to continuously vary from random phononic materials to phononic crystals. The properties of the scatterers are controlled by their size and/or the resonant frequencies. The properties of the host material are controlled by the viscothermal losses. Transport properties of stealthy hyperuniform materials are found to be robust to both the scatterer dimensions and inherent viscothermal losses, while strongly affected by the scatterer resonances, which introduce sharp dips in the transmission coefficient., This work was funded by the project HYPERMETA under the program Etoiles Montantes of the Region Pays de la Loire,by the ANR-RGC METARoom (Grant No. ANR-18-CE08-0021) project, and by Project No. PID2020-112759GB-I00/AEI/10.13039/501100011033 of the Ministerio de Ciencia e Innovacion. The authors have no conflicts to disclose
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bidirectional Lambertian Scatterers Using Acoustic Holograms for the Simultaneous Control of Reflected and Transmitted Wavefronts

  • Ballestero, Eric
  • Groby, Jean Philippe
  • Rodríguez-Sendra, Josep|||0000-0001-5344-6602
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Acoustic holography enables the creation of tailored spatiotemporal wavefield distributions. In this study, the design of acoustic holograms that simultaneously control both the reflected and the transmitted fields are presented. This is accomplished through the use of a bidirectional metasurface, which encodes the phase of a desired wavefront in a discrete spatial distribution of monolithic sub-elements. This approach is employed in particular to design an optimized hologram that behaves as an ideal Lambertian scatter for both reflection and transmission. The design follows a quadratic-residue sequence, with theoretical results validated both numerically and experimentally. It is observed that this kind of structure produces a uniform scattering response, with a high diffusion coefficient of approximately 0.7 and a correlation scattering coefficient of 0.98 in both transmission and reflection. The hologram demonstrates the potential to significantly reduce imaging artefacts in ultrafast ultrasound techniques in strongly reverberating environments, as evidenced by examples., E.-B. and J.-P. G. contributed equally to this work. The collaboration between the authors of this article was made possible thanks to Institut d'Acoustique - Graduate School (IAGS) project (ANR-17-EURE-0014) from the Laboratoire d'Acoustique du l'Universite du Mans (LAUM) for the support and mobility. The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and N.J and V.R-G acknowledges financial support from Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana through project CIAICO/2022/052 of the Programa para la promocion de la investigacion cientifica, el desarrollo tecnologico y la innovacion en la Comunitat Valenciana. This research has been supported by the Ministerio Espanol de Ciencia e Innovacion grant RYC2021-034920-I and Agencia Estatal de Investigacion grants PID2022-142719OB-C21 and CNS2023-145707 funded by MCIN/AEI/10.13039/501100011033 and grant PID2023-146237NB-I00 funded by MICIU/AEI/ 10.13039/501100011033. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perfect Absorption in Mirror-Symmetric Acoustic Metascreens

  • Romero-García, V.
  • Groby, J.-P.
  • Merkel, A.
  • Tournat, V.
  • Theocharis, G.
  • Richoux, O.
  • Pagneux, V.
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Mirror-symmetric acoustic metascreens producing perfect absorption independently of the incidence side are theoretically and experimentally reported in this work. The mirror-symmetric resonant building blocks of the metascreen support symmetric and antisymmetric resonances that can be tuned to be at the same frequency (degenerate resonances). The geometry of the building blocks is optimized to critically couple both the symmetric and the antisymmetric resonances at the same frequency, allowing perfect absorption of sound from both sides of the metascreen. A hybrid analytical model based on the transfer-matrix method and the modal decomposition of the exterior acoustic field is developed to analyze the scattering properties of the metascreen. The resulting geometry is three-dimensionally printed and experimentally tested in an impedance tube. The experimental results agree well with the theoretical predictions, proving the efficiency of these metascreens for the perfect absorption of sound in ventilation problems., We gratefully acknowledge the Agence Nationale de la Recherche (ANR) - Research Grants Council (RGC) METARoom project (Grant No. ANR-18-CE08-0021) and the HYPERMETA project, funded under the program Étoiles Montantes of the Région Pays de la Loire. This paper is based upon work from European Cooperation in Science and Technology (COST) Action DENORMS (Designs for Noise Reducing Materials and Structures) Grant No. CA15125, supported by COST. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation, and Universities (MICINN) through the grant "Juan de la Cierva-Incorporación" (Grant No. IJC2018-037897-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aerogel-based metasurfaces for perfect acoustic energy absorption

  • Fernandez-Marin, Antonio A.
  • Groby, Jean-Philippe
  • Jimenez, Noe|||0000-0002-6539-670X
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is analyzed using the Argand diagram of the reflection coefficient, i.e., the trajectory of the reflection coefficient as a function of frequency in the complex plane. The lack or excess of losses in the system can be identified via this Argrand diagram in order to achieve the impedance matching condition. The universality of this tool can be further exploited to design more complex metasurfaces for perfect sound absorption, thus allowing the rapid design of novel and efficient absorbing metamaterials., This work was funded by the RFI Le Mans Acoustique, Region Pays de la Loire. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). N.J. acknowledges financial support from Generalitat Valenciana through Grant No. APOSTD/2017/042. J.-P.G and V.R.G. gratefully acknowledge the ANR-RGC METARoom (No. ANR-18-CE08-0021) project and the HYPERMETA project funded under the program Etoiles Montantes of the Region Pays de la Loire. J.S-D. acknowledges the support of the Ministerio de Economia y Competitividad of the Spanish government and the European Union FEDER through Project No. TEC2014-53088-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Underwater metamaterial absorber with impedance-matched composite

  • Qu, Sichao
  • Gao, Nan
  • Tinel, Alain
  • Morvan, Bruno
  • Groby, Jean-Philippe
  • Sheng, Ping
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] By using a structured tungsten-polyurethane composite that is impedance matched to water while simultaneously having a much slower longitudinal sound speed, we have theoretically designed and experimentally realized an underwater acoustic absorber exhibiting high absorption from 4 to 20 kHz, measured in a 5.6 m by 3.6 m water pool with the time-domain approach. The broadband functionality is achieved by optimally engineering the distribution of the Fabry-Perot resonances, based on an integration scheme, to attain impedance matching over a broad frequency range. The average thickness of the integrated absorber, 8.9 mm, is in the deep subwavelength regime (~¿/42 at 4 kHz) and close to the causal minimum thickness of 8.2 mm that is evaluated from the simulated absorption spectrum. The structured composite represents a new type of acoustic metamaterials that has high acoustic energy density and promises broad underwater applications., P.S. acknowledges the support of RGC grant A-HKUST601/18 and AoE/P-502/20-3 for this work. J.-P.G. and V.R.-G. acknowledge the support of the ANR-RGC METARoom project (ANR-18-CE08-0021) for this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fundamental constraints on broadband passive acoustic treatments in unidimensional scattering problems

  • Meng, Yang
  • Gabard, Gwénaël
  • Groby, Jean-Philippe
  • Bricault, Charlie
  • Goudé, Sébastien
  • Sheng, Ping
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] In a passive lossy acoustical system, sum rules derived from passivity explicitly relate the broadband response to the spatial dimension of the system, which provide important design criteria as well. In this work, the theory of Herglotz function is applied systematically to derive sum rules for unidimensional scattering problems relying on passive acoustic treatments which are generally made of rigid, motionless and subwavelength structures saturated by air. The rigid-boundary reflection, soft-boundary reflection and transmission problems are analysed. The derived sum rules are applied for guiding the designs of passive absorbers and mufflers: the required minimum space is directly predicted from the target (i.e. the desired absorption or transmission-loss spectra) without any specific design. Besides, it is possible to break this type of sum rules and fundamental constraints in particular cases. This property, if well used, could result in ultra-compact absorbers working at long wavelength up to infinity., This work is supported by Valeo company and the ANR-RGC METARoom project (grant nos. ANR-18-CE08-0021 and RGC A-HKUST601/18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Perfect acoustic absorption in deep sub-wavelength structures for the ventilation problems with degenerate resonators

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Jimenez, Noe|||0000-0002-6539-670X
  • Richoux, Olivier
  • Theocharis, Georgios
  • Groby, Jean-Philippe
  • Pagneux, Vincent
[EN] In this work we report a mechanisms providing symmetric perfect acoustic absorption by sub-wavelength structures in the ventilation problem. While in the problem of reflection the mechanism consists in critically coupling a single resonance independently of its nature, the problem of transmission becomes more complicated and a degenerate resonator with symmetric and antisymmetric resonances should be designed with both resonances critically coupled. The system analyzed in this work is made by a panel with a periodic distribution of slits, the upper wall of which are loaded by Helmholtz Resonators. The propagation in the slit is highly dispersive due to the presence of the resonators, producing a slow sound propagation before the resonance, and down shifting it to low frequencies. By controlling the geometry of the resonator, the visco-thermal losses can be tuned in order to compensate the leakage of the system and fulfill the critical coupling condition so activating the perfect absorption of sound. In the case of transmission, a double slit is needed, one acting as symmetric and the other one as antisymmetric resonators., The authors gratefully acknowledge the ANR-RGC META- Room (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program E?toiles Montantes of the Région Pays de la Loire. This article is based upon work from COST (European Cooperation in Science and Technology) Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Subwavelength Broadband Perfect Absorption for Unidimensional Open-Duct Problems

  • Meng, Yang
  • Gabard, Gwénaël
  • Groby, Jean-Philippe
  • Bricault, Charlie
  • Goudé, Sébastien
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] Passive metamaterials provide efficient solutions for sound absorption in the low-frequency regime with deep subwavelength dimensions. They have been extensively applied in unidimensional reciprocal problems considering that an incident wave is either reflected or transmitted at the outlet boundary. However, the generalized problem with impedance boundary condition is not well understood yet. This work presents a general design methodology of metamaterial absorbers for open-duct problems, which is a special case of impedance outlet boundary encountered in broad practical applications, for example, noise-attenuation problems in heat ventilation and air conditioning systems. By properly using monopolar point scatterers made of arrays of Helmholtz resonators, the design process is significantly simplified; the transfer matrix modeling is sufficiently accurate to describe the acoustic response of the system. A single monopolar point scatterer is insufficient to attenuate both the reflected and radiated waves; a frequency-dependent maximum absorption exists and is derived analytically. To go beyond this absorption bound and achieve perfect absorption, at least two point scatterers are necessary. Specific designs are provided and validated experimentally for maximum or perfect absorption, either at single frequencies or over specific frequency bands., All the authors gratefully acknowledge the support of Valeo. J.-P.G. and V.R.-G. would like to acknowledge the support of the ANR-RGC METARoom project (ANR-18-CE08-0021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metadiffusers for quasi-perfect and broadband sound diffusion

  • Ballestero, E.
  • Groby, J.-P.
  • Aygun, H.
  • Dance, S.
  • Romero-García, V.
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Sound diffusion refers to the ability of a surface to evenly scatter sound energy in both time and space. However, omni-directional radiation of sound, or perfect diffusion, can be impractical or difficult to reach under traditional means. This is due to the considerable size required, and the lack of tunability, of typical quarter-wavelength scattering strategies necessary for producing the required complexity of the surface acoustic impedance. As such, it can be a challenge to design sound diffusing structures that can display near perfect diffusion performance within slim dimensions. In this work, we propose a method for obtaining quasi-perfect and broadband sound diffusion coefficients using deep-subwavelength acoustic diffusers, i.e., metadiffusers. The relation among the geometry of the metasurface, the bandwidth, and the diffusion performance is analytically and numerically studied. For moderate bandwidths, around 1/3 of an octave, the method results in nearly perfect sound diffusion, while for a bandwidth of 2.5 octaves, a normalized diffusion coefficient of 0.8 was obtained using panels 1/30th thinner than traditional phase-grating designs. The ratio between the wavelength and the size of the unit cell was identified as a limitation of the performance. This work demonstrates the versatility and effectiveness of metadiffusers to generate diffuse reflections outperforming those of classical sound diffusers., The collaboration between the authors of this article was made possible thanks to the European Cooperation in Science and Technology (COST) Action CA15125-Design in Noise Reducing Materials (DENORMS). This study was financed by the Royal Opera House, Covent Garden, and the United Kingdom Acoustics Network (UKAN). The authors gratefully acknowledge the ANR-RGC METARoom (No. ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire. N.J. acknowledges financial support from Generalitat Valenciana through Grant No. APOSTD/2017/042.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sub-Diffractive Acoustic Vortices by Nonlinear Mixing

  • Jimenez, Noe|||0000-0002-6539-670X
  • Ealo, Joao
  • Muelas-Hurtado, Rubén
  • Duclos, Aroune
  • Romero-García, Vicent
[EN] Vortex beams, characterized by a collimated wavefront with a phase dislocation at their principal axis, have found practical applications to construct acoustic tweezers for particle trapping and manipulation, or underwater communications. However, the natural diffraction of the wavefront limits the size of the vortex. This result in vortices whose bright core is larger than the wavelength, limiting their use for practical applications such as long-range underwater communications. In this work, we synthesize a vortex beam of sub-wavelength size at a distance beyond Rayleigh diffraction length using the nonlinear mixing of two confocal, high-frequency and detuned vortex beams of different topological charges. By using the nonlinear mixing of two confocal vortices, it was generated a low-frequency (1 kHz) focused vortex beam of integer topological charge whose distance between magnitude maxima is about 18 times smaller than its wavelength at a distance about 3 times the Rayleigh diffraction length. Sub-wavelength vortices emerge as a result of the spatiotemporal interference of two primary vortex beams due to the conservation of angular momentum during nonlinear wave-mixing. This mechanism opens new paths to design directive parametric antennas for vortex transceivers or particle manipulation systems at scales well below the diffraction limit., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva Incorporacion (IJC2018-037897-I) and PID2019-111436RB-C22, and by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016. This article is based upon work from COST Action DENORMS CA15125. JPG and VRG gratefully acknowledge projects ANR-RGC METARoom (ANR-18-CE08- 0021) and the HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Natural sonic crystal absorber constituted of seagrass (Posidonia Oceanica) fibrous spheres

  • Barguet, L.
  • Romero-García, V.
  • Groby, J.-P.
  • Jimenez, Noe|||0000-0002-6539-670X
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] We present a 3-dimensional fully natural sonic crystal composed of spherical aggregates of fibers (called Aegagropilae) resulting from the decomposition of Posidonia Oceanica. The fiber network is first acoustically characterized, providing insights on this natural fiber entanglement due to turbulent flow. The Aegagropilae are then arranged on a principal cubic lattice. The band diagram and topology of this structure are analyzed, notably via Argand representation of its scattering elements. This fully natural sonic crystal exhibits excellent sound absorbing properties and thus represents a sustainable alternative that could outperform conventional acoustic materials., This article is based upon work from COST Action DENORMS CA15125, supported by COST(European Cooperation in Science and Technology). The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project, the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire, and the project PID2019-109175GB-C22 funded by the Spanish Ministry of Science and Innovation. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) through grant "Juan de la Cierva - Incorporacion" (IJC2018-037897-I). The authors would like to thank V. Pagneux and R. Pico Vila for useful discussions and J. Barber and C. Dordoni for their help in collecting the samples.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spiral sound-diffusing metasurfaces based on holographic vortices

  • Jimenez, Noe|||0000-0002-6539-670X
  • Groby, Jean-Philippe
  • Romero-García, Vicent
[EN] In this work, we show that scattered acoustic vortices generated by metasurfaces with chiral symmetry present broadband unusual properties in the far-field. These metasurfaces are designed to encode the holographic field of an acoustical vortex, resulting in structures with spiral geometry. In the near field, phase dislocations with tuned topological charge emerge when the scattered waves interference destructively along the axis of the spiral metasurface. In the far field, metasurfaces based on holographic vortices inhibit specular reflections because all scattered waves also interfere destructively in the normal direction. In addition, the scattering function in the far field is unusually uniform because the reflected waves diverge spherically from the holographic focal point. In this way, by triggering vorticity, energy can be evenly reflected in all directions except to the normal. As a consequence, the designed metasurface presents a mean correlation-scattering coefficient of 0.99 (0.98 in experiments) and a mean normalized diffusion coefficient of 0.73 (0.76 in experiments) over a 4 octave frequency band. The singular features of the resulting metasurfaces with chiral geometry allow the simultaneous generation of broadband, diffuse and non-specular scattering. These three exceptional features make spiral metasurfaces extraordinary candidates for controlling acoustic scattering and generating diffuse sound reflections in several applications and branches of wave physics as underwater acoustics, biomedical ultrasound, particle manipulation devices or room acoustics., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Grant "Juan de la Cierva-Incorporacion" (IJC2018-037897-I) and PID2019-111436RB-C22, and by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). JPG and VRG gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Explicit Modeling and Optimization of Acoustic Metalenses for Baffled Sources

  • Cavalieri, Théo
  • Melon, Manuel
  • Groby, Jean-Philippe
  • Chamard, Jean-Christophe
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The steering and the focusing of acoustic beams are of increasing interest for personalized-sound-zone applications. Sound zones require the generation of a strong contrast in sound pressure level between different regions of the space. A way to do so is to control and steer the acoustic field radiated from a source with use of metamaterial-based acoustic lenses. Predictive models based on numerical approaches such as the finite-element method are commonly used, but they are generally cumbersome and time-consuming. In contrast, explicit models rely on Snell's law of refraction and phase gratings but do not account for the couplings between the metamaterial atoms. In this work, a metamaterial-based acoustic lens is proposed as a solution to steer and focus acoustic sources, with use of slits loaded with periodic Helmholtz resonators. We control the radiation of a baffled duct by a metalens located at the output of the waveguide and excited at the other end by a loudspeaker. A fully explicit two-dimensional predictive model is developed on the basis of the mode-matching technique, accounting for thermoviscous losses, interslit evanescent coupling, and high-order modes in the baffled duct. The pressure radiated by the metalens outside the baffled duct is then explicitly derived. The semianalytical results show excellent agreement when compared with the solutions obtained by the finite-element method, both in the near field and in the far field over a wide frequency range. An optimization strategy is then proposed, and the beam steering and focusing are reported experimentally on a three-dimensionally-printed prototype., This research was funded by Stellantis. J.-P.G. and V.R.-G, also acknowledge the support of the ANR-RGC METARoom project (ANR-18-CE08-002) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental evidence of a hiding zone in a density-near-zero acoustic metamaterial

  • Malléjac, M.
  • Merkel, A.
  • Christensen, J.
  • Tournat, V.
  • Groby, J.-P.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] This paper examines the feasibility of cloaking an obstacle using Plate-type Acoustic Metamaterials (PAMs). We present two distinct strategies to cloak this obstacle, using either the near-zero-density regime of a periodic arrangement of plates or the acoustic doping phenomenon to achieve simultaneous zero-phase propagation and impedance matching. The strong limitations induced by viscothermal and viscoelastic losses that cannot be avoided in such a system are studied. A hiding zone is reported analytically, numerically, and experimentally. In contrast to cloaking, where zero-phase propagation must be accompanied by total transmission and zero reflection, the hiding configuration requires that the scattering properties of the hiding device must not be affected by the presence of the obstacle embedded in it. Contrary to cloaking, the hiding phenomenon is achievable even with a realistic PAM possessing unavoidable losses., This article is based upon the work from COST Action DENORMS (No. CA15125), supported by COST (European Cooperation). The authors would like to thank the support of the ANR-RGC METARoom (No. ANR-18-CE08-0021) project. J. Christensen acknowledges the support from the European Research Council (ERC) through the Starting Grant No. 714577 PHONOMETA and from the MINECO through a Ramon y Cajal Grant (No. RYC-2015-17156).