Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibration of overtopping roughness factors for concrete armor units in non-breaking conditions using the CLASH database

  • Molines, Jorge|||0000-0001-7850-0759
  • Medina, Josep R.|||0000-0001-5007-7426
The roughness factor (γf) is a parameter used in overtopping estimators to account for the effects of armor unit geometry, the number of layers in the armor and other structural characteristics. Different values of γf for the same armors are given in the literature; however, in this study, the value of γf was calibrated for each overtopping estimator using the best available overtopping data. A methodology based on a bootstrapping technique is proposed to statistically characterize the roughness factors which best fit each formula. For each selected armor unit and overtopping formula, three percentiles (10%, 50% and 90%) of γf are given. Five sets of γf are given for five different overtopping estimators, calibrated using overtopping data from the CLASH database and additional tests with Cubipod armors in non-breaking conditions. The results indicate differences up to 20% in the optimum values of γf compared to those given in the literature. Optimum roughness factors are provided for the CLASH neural network (CLNN); the CLNN was found to be a better overtopping estimator than the other four overtopping formulas compared in this study. The γf is dependent on both the overtopping estimator and the dataset used. Armor porosity affects not only armor roughness and overtopping but also armor hydraulic stability; thus, recommended packing densities must be followed to avoid changes in porosity during lifetime. The sensitivity of the overtopping prediction to the roughness factor depends on the relative crest freeboard (Rc/Hm0); the greater the Rc/Hm0, the higher the sensitivity., The authors are grateful for financial support from Spanish Ministerio de Economia y Competitividad (Grant BIA2012-33967). The first author was funded through the FPU program (Formacion del Profesorado Universitario, Grant AP2010-4366) by the Spanish Ministerio de Educacion, Cultura y Deporte. The authors also thank Debra Westall for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of armour porosity on the hydraulic stability of cube armour layers

  • Medina, Josep R.|||0000-0001-5007-7426
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
Armour placement and packing density directly affect construction costs and hydraulic performance of mound breakwaters. In this paper, the literature concerning the influence of armour porosity on the hydraulic stability of single- and double-layer armours is discussed. Qualitative and quantitative estimations for the influence of armour porosity and packing density on the hydraulic stability are given for the most common concrete armour units. The analysis focuses on specific 2D hydraulic stability tests of double-layer randomly-placed cube armours with different armour porosities and permeable core. The stability number showed a 1.2-power relationship with the packing density for double-layer randomly-placed cube armours considering armour unit extraction and Heterogeneous Packing. The literature review and experimental results with small-scale breakwater models protected with a variety of armour units clearly indicate that a significant increase in armour porosity above the recommended values substantially decreases armour hydraulic stability. To avoid uncontrolled model effects, packing density should be routinely measured in small-scale tests, and armour placement techniques should be monitored at prototype scale. The actual packing density obtained in small-scale models and prototypes has to be explicitly reported, because packing density significantly affects hydraulic stability during service time. (C) 2014 Elsevier Ltd. All rights reserved., The authors are grateful for financial support from European FEDER and Spanish Ministerio de Economia y Competitividad (Grant BIA2012-33967) and CDTI (CUBIPOD and CLIOMAR Projects). The second author was funded through the FPU program (Formacion del Profesorado Universitario, Grant AP2010-4366) by the Spanish Ministerio de Educacion, Cultura y Deporte. The authors also thank Debra Westall for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Explicit wave overtopping formula for mound breakwaters with crown walls using CLASH neural network-derived data

  • Molines, Jorge|||0000-0001-7850-0759
  • Medina, Josep R.|||0000-0001-5007-7426
Based on the Crest Level Assessment of Coastal Structures (CLASH) Neural Network Overtopping prediction method, a new 16-parameter overtopping estimator (Q6) was developed for conventional mound breakwaters with crown walls, both with and without toe berms. Q6 was built up using the overtopping estimations given by the CLASH Neural Network and checked using the CLASH database. Q6 was compared to other conventional overtopping formulas, and the Q6 obtained the lowest prediction errors. Q6 provides overtopping predictions similar to the CLASH Neural Network for conventional mound breakwaters but using only six explanatory dimensionless variables (Rc=Hm0; Ir; Rc=h;Gc=Hm0; Ac=Rc, and a toe berm variable based on Rc=h) and two reduction factors (g f and g b ). Q6 describes explicit relationships between input variables and overtopping discharge, and hence it facilitates use in engineering design to identify costeffective solutions and to quantify the influence of variations in wave and structural parameters., The authors are grateful for financial support from the Spanish Ministerio de Economia y Competitividad (Grant BIA2012-33967). The first author was funded through the FPU program (Formacion del Profesorado Universitario, Grant AP2010-4366) by the Spanish Ministerio de Educacion, Cultura y Deporte. The authors also thank Debra Westall for revising the manuscript.