Pasar al contenido principal

ESTUDIO DEL COMPORTAMIENTO NO LINEAL DE ONDAS MECANICAS PARA LA CARACTERIZACION DE MATERIALES BASADOS EN CEMENTO Y SU DURABILIDAD

BES-2011-044624

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Formación de Recursos Humanos de Investigación
Subprograma subprograma de Formación de Personal Investigador (FPI)
Convocatoria Contratos Predoctorales
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Formación e Incorporación de Investigadores
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The effects of moisture and micro-structural modifications in drying mortars on vibration-based NDT methods

  • Eiras Fernández, Jesús Nuño
  • Popovics, John Sandor
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
In this paper, we investigate the utility of vibration-based NDT tests to detect the subtle microstructural modifications and cracking damage in Portland cement mortars subjected to oven drying treatment. Both linear (resonant mode frequency and damping) and nonlinear (nonlinear hysteretic behavior) vibration test data are reported, collected from samples having a range of water to cement ratios and at two different aggregate contents. All test data are affected by the drying treatments, but it appears that the resonant mode frequency response is dominated by the reduction in internal moisture content with drying and changing aggregate cement ratio of the mixture. On the other hand, the linear mode damping, and more so the nonlinear hysteretic parameter, are more influenced by the microstructural modification and cracking damage caused by drying. In particular it appears that the nonlinear hysteretic parameter is very sensitive to internal damage and microstructural modifications caused by oven drying, but not notably sensitive to pore moisture content, and water to cement and aggregate to cement ratios. (C) 2015 Elsevier Ltd. All rights reserved., The authors want to acknowledge the financial support of the Ministerio de Economia y Competitividad (MINECO), Spain, and FEDER funding (Ondacem Project: BIA 2010-19933). J.N. Eiras wants to acknowledge the financial support provided by Ministerio de Economia y Competitividad (MINECO), Spain, grant BES-2011-044624 and grants EEBB I-13-06609, and EEBB-I-14-08993 for supporting extended visits to the University of Illinois.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic acousto-elastic test using continuous probe wave and transient vibration to investigate material nonlinearity

  • Eiras Fernández, Jesús Nuño
  • Vu, Quang Ahn
  • Lott, Martin
  • Garnier, Vincent
  • Payan, Cédric
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
This study demonstrates the feasibility of the dynamic acousto-elastic effect of a continuous high frequency wave for investigating the material nonlinearity upon transient vibration. The approach is demonstrated on a concrete sample measuring 15 15 60 cm3 . Two ultrasonic transducers (emitter and receiver) are placed at its middle span. A continuous high frequency wave of 500 kHz propagates through the material and is modulated with a hammer blow. The position of the hammer blow on the sample is configured to promote the first bending mode of vibration. The use of a continuous wave allows discrete time extraction of the nonlinear behavior by a short-time Fourier transform approach, through the simultaneous comparison of a reference non-modulated signal and an impact-modulated signal. The hammer blow results in phase shifts and variations of signal amplitude between reference and perturbed signals, which are driven by the resonant frequency of the sample. Finally, a comprehensive analysis of the relaxation mechanisms (modulus and attenuation recovery) is conducted to untangle the coupled fast and slow hysteretic effects. 2016 Elsevier B.V. All rights reserved., The authors want to acknowledge the financial support of the Ministerio de Economia y Competitividad (MINECO), Spain and FEDER funding (Ondacem Project: BIA 2010-19933). J.N. Eiras is grateful to the Ministerio de Economia y Competitividad (MINECO), Spain, Grant BES-2011-044624 and Grant EEBB I-15-10178, in support of an extended visit to the Aix-Marseille Universite. The French National Research Agency is also thanked for support under the EVADEOS (Grant ANR-11-VILD-0002) and ENDE (Grant ANR-11 RSNR 0009) programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-Classical nonlinear feature extraction from standard resonance vibration data for damage detection

  • Eiras Fernández, Jesús Nuño
  • Kundu, T.
  • Popovics, J.S.
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Dynamic non-classical nonlinear analyses show promise for improved damage diagnostics in materials that exhibit such structure at the mesoscale, such as concrete. In this study, nonlinear non-classical dynamic material behavior from standard vibration test data, using pristine and frost damaged cement mortar bar samples, is extracted and quantified. The procedure is robust and easy to apply. The results demonstrate that the extracted nonlinear non-classical parameters show expected sensitivity to internal damage and are more sensitive to changes owing to internal damage levels than standard linear vibration parameters., The authors acknowledge the financial support of the Ministerio de Ciencia e Innovacion MICINN, Spain, FEDER funding (Ondacem Project: BIA 2010-19933) and BES-2011-044624.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nondestructive monitoring of ageing of Alkali resistant Glass fiber reinforced cement (GRC)

  • Eiras Fernández, Jesús Nuño
  • Kundu, Tribikram
  • Bonilla Salvador, María Mercedes
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Glass fiber reinforced cement (GRC) is a composite material made of portland cement mortar and alkali resistant (AR) fibers. AR fibers are added to portland cement to give the material additional flexural strength and toughness. However, ageing deteriorates the fibers and as a result the improvement in the mechanical properties resulted from the fiber addition disappears as the structure becomes old. The aim of this paper is monitoring GRC ageing by nondestructive evaluation (NDE) techniques. Two different NDE techniques (1) nonlinear impact resonant acoustic spectroscopy analysis and (2) propagating ultrasonic guided waves are used for this purpose. Both techniques revealed a reduction of the nonlinear behavior in the GRC material with ageing. Specimens are then loaded to failure to obtain their strength and stiffness. Compared to the un-aged specimens, the aged specimens are found to exhibit more linear behavior, have more stiffness but less toughness. Finally, undisturbed fragments on the fracture surface from mechanical tests are inspected under the electron microscope, to understand the fundamental mechanisms that cause the change in the GRC behavior with ageing., The authors want to acknowledge the financial support of the Ministerio de Ciencia e Innovacion MICINN, Spain, and FEDER funding (Ondacem Project: BIA 2010-19933) and BES-2011-044624. Also thanks to PAID-02-11 Program from Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of carbonation on the linear and nonlinear dynamic properties of cement-based materials

  • Eiras Fernández, Jesús Nuño
  • Kundu, Tribikram
  • Popovics, John Sandor
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Carbonation causes a physicochemical alteration of cement-based materials, leading to a decrease of porosity and an increase of material hardness and strength. However, carbonation will decrease the pH of the internal pore water solution, which may depassivate the internal reinforcing steel, giving rise to structural durability concerns. Therefore, the proper selection of materials informed by parameters sensitive to the carbonation process is crucial to ensure the durability of concrete structures. The authors investigate the feasibility of using linear and nonlinear dynamic vibration response data to monitor the progression of the carbonation process in cement-based materials. Mortar samples with dimensions of 40 x 40 x 160 mm were subjected to an accelerated carbonation process through a carbonation chamber with 55% relative humidity and >95% of CO2 atmosphere. The progress of carbonation in the material was monitored using data obtained with the test setup of the standard resonant frequency test (ASTM C215-14), from a pristine state until an almost fully carbonated state. Linear dynamic modulus, quality factor, and a material nonlinear response, evaluated through the upward resonant frequency shift during the signal ring-down, were investigated. The compressive strength and the depth of carbonation were also measured. Carbonation resulted in a modest increase in the dynamic modulus, but a substantive increase in the quality factor (inverse attenuation) and a decrease in the material nonlinearity parameter. The combined measurement of the vibration quality factor and nonlinear parameter shows potential as a sensitive measure of material changes brought about by carbonation. (C) 2015 Society of Photo-Optical Instrumentation Engineers (SPIE), The authors want to acknowledge the financial support of the Ministerio de Economia y Competitividad (MINECO), Spain, and FEDER funding (Ondacem Project: BIA 2010-19933). Jesus N. Eiras wants to acknowledge the financial support provided by Ministerio de Economia y Competitividad (MINECO), Spain, grant BES-2011-044624.