Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Segmentation and classification of road markings using MLS data

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Martínez Sánchez, Joaquín
  • Arias Sánchez, Pedro
Traffic signs are one of the most important safety elements in a road network. Particularly, road markings provide information about the limits and direction of each road lane, or warn the drivers about potential danger. The optimal condition of road markings contributes to a better road safety. Mobile Laser Scanning technology can be used for infrastructure inspection and specifically for traffic sign detection and inventory. This paper presents a methodology for the detection and semantic characterization of the most common road markings, namely pedestrian crossings and arrows. The 3D point cloud data acquired by a LYNX Mobile Mapper system is filtered in order to isolate reflective points in the road, and each single element is hierarchically classified using Neural Networks. State of the art results are obtained for the extraction and classification of the markings, with F-scores of 94% and 96% respectively. Finally, data from classified markings are exported to a GIS layer and maintenance criteria based on the aforementioned data are proposed., Ministerio de Economía y Competitividad | Ref. BES-2014-067736, Ministerio de Economía y Competitividad | Ref. TIN2013-46801-C4-4-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic parametrization and shadow analysis of roofs in urban areas from ALS point clouds with solar energy purposes

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Liñares Méndez, Patricia
  • Padín Beltrán, Marta
A basic feature of modern and smart cities is their energetic sustainability, using clean and renewable energies and, therefore, reducing the carbon emissions, especially in large cities. Solar energy is one of the most important renewable energy sources, being more significant in sunny climate areas such as the South of Europe. However, the installation of solar panels should be carried out carefully, being necessary to collect information about building roofs, regarding its surface and orientation. This paper proposes a methodology aiming to automatically parametrize building roofs employing point cloud data from an Aerial Laser Scanner (ALS) source. This parametrization consists of extracting not only the area and orientation of the roofs in an urban environment, but also of studying the shading of the roofs, given a date and time of the day. This methodology has been validated using 3D point cloud data of the city of Santiago de Compostela (Spain), achieving roof area measurement errors in the range of ±3%, showing that even low-density ALS data can be useful in order to carry out further analysis with energetic perspective., Ministerio de Economía y Competitividad | Ref. BES-2014-067736, Xunta de Galicia | Ref. ED431C2016‐038, Ministerio de Economía y Competitividad | Ref. TIN201346801-C4-4-R, Ministerio del Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Pointnet for the automatic classification of aerial point clouds

  • Soilán Rodríguez, Mario
  • Lindenbergh, R.
  • Riveiro Rodríguez, Belén
  • Sánchez Rodríguez, Ana
During the last couple of years, there has been an increased interest to develop new deep learning networks specifically for processing 3D point cloud data. In that context, this work intends to expand the applicability of one of these networks, PointNet, from the semantic segmentation of indoor scenes, to outdoor point clouds acquired with Airborne Laser Scanning (ALS) systems. Our goal is to of assist the classification of future iterations of a national wide dataset such as the Actueel Hoogtebestand Nederland (AHN), using a classification model trained with a previous iteration. First, a simple application such as ground classification is proposed in order to prove the capabilities of the proposed deep learning architecture to perform an efficient point-wise classification with aerial point clouds. Then, two different models based on PointNet are defined to classify the most relevant elements in the case study data: Ground, vegetation and buildings. While the model for ground classification performs with a F-score metric above 96%, motivating the second part of the work, the overall accuracy of the remaining models is around 87%, showing consistency across different versions of AHN but with improvable false positive and false negative rates. Therefore, this work concludes that the proposed classification of future AHN iterations is feasible but needs more experimentation, Ministerio de Economía y Competitividad | Ref. BES-2014-067736
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Safety assessment on pedestrian crossing environments using MLS data

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Sánchez Rodríguez, Ana
  • Arias Sánchez, Pedro
In the framework of infrastructure analysis and maintenance in an urban environment, it is important to address the safety of every road user. This paper presents a methodology for the evaluation of several safety indicators on pedestrian crossing environments using geometric and radiometric information extracted from 3D point clouds collected by a Mobile Mapping System (MMS). The methodology is divided in four main modules which analyze the accessibility of the crossing area, the presence of traffic lights and traffic signs, and the visibility between a driver and a pedestrian on the proximities of a pedestrian crossing. The outputs of the analysis are exported to a Geographic Information System (GIS) where they are visualized and can be further processed in the context of city management. The methodology has been tested on approximately 30 pedestrian crossings in cluttered urban environments of two different cities. Results show that MMS are a valid mean to assess the safety of a specific urban environment, regarding its geometric conditions. Remarkable results are presented on traffic light classification, with a global F-score close to 95%, Ministerio del Interior | Ref. SPIP2017-02122, Xunta de Galicia | Ref. ED431C2016‐038, Ministerio de Economía y Competitividad | Ref. BES-2014-067736
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic parametrization of urban areas using ALS data: the case study of Santiago de Compostela

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Liñares Méndez, Patricia
  • Pérez Rivas, Andrea
Nowadays, gathering accurate and meaningful information about the urban environment with the maximum efficiency in terms of cost and time has become more relevant for city administrations, as this information is essential if the sustainability or the resilience of the urban structure has to be improved. This work presents a methodology for the automatic parametrization and characterization of different urban typologies, for the specific case study of Santiago de Compostela (Spain), using data from Aerial Laser Scanners (ALS). This methodology consists of a number of sequential processes of point cloud data, using exclusively their geometric coordinates. Three of the main elements of the urban structure are assessed in this work: intersections, building blocks, and streets. Different geometric and contextual metrics are automatically extracted for each of the elements, defining the urban typology of the studied area. The accuracy of the measurements is validated against a manual reference, obtaining average errors of less than 3%, proving that the input data is valid for this assessment., Ministerio de Economía, Industria y Competitividad | Ref. BES-2014-067736, Xunta de Galicia | Ref. ED431C2016‐038
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Traffic sign detection in MLS acquired point clouds for geometric and image-based semantic inventory

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Martínez Sánchez, Joaquín
  • Arias Sánchez, Pedro
Nowadays, mobile laser scanning has become a valid technology for infrastructure inspection. This technology permits collecting accurate 3D point clouds of urban and road environments and the geometric and semantic analysis of data became an active research topic in the last years. This paper focuses on the detection of vertical traffic signs in 3D point clouds acquired by a LYNX Mobile Mapper system, comprised of laser scanning and RGB cameras. Each traffic sign is automatically detected in the LiDAR point cloud, and its main geometric parameters can be automatically extracted, therefore aiding the inventory process. Furthermore, the 3D position of traffic signs are reprojected on the 2D images, which are spatially and temporally synced with the point cloud. Image analysis allows for recognizing the traffic sign semantics using machine learning approaches. The presented method was tested in road and urban scenarios in Galicia (Spain). The recall results for traffic sign detection are close to 98%, and existing false positives can be easily filtered after point cloud projection. Finally, the lack of a large, publicly available Spanish traffic sign database is pointed out., Ministerio de Economía y Competitividad | Ref. TIN201346801-C4-4-R, Xunta de Galicia | Ref. CN2012/269, Ministerio del Interior | Ref. SPIP20151500, Ministerio de Economía y Competitividad | Ref. BES-2014-067736
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Comparison of heuristic and deep learning-based methods for ground classification from aerial point clouds

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Balado Frías, Jesús
  • Arias Sánchez, Pedro
The automatic definition of the ground from 3D point clouds has been a common process for the last two decades, with many different approaches and applications that can be found in a vast literature. This paper presents a comparison of three different methodological concepts for ground classification, in order to establish the advantages and drawbacks of each method. First, a heuristic method, based on previous knowledge of the geometry and context of the 3D data. Secondly, a Deep Convolutional Network based on SegNet that classifies 2D images generated from the 3D point cloud. Finally, the third method applies a Deep Learning classification based on PointNet, which takes 3D points directly as inputs. To validate each method and compare them, public and labelled point clouds frothe m the Actueel Hoogtebestand Nederland dataset are employed. Furthermore, the three methods are validated against the ISPRS 3D Semantic Labeling Contest benchmark. The results obtained show that the deep learning based approaches outperform the heuristic method, with F-scores above 96%. The best results were obtained using a shallower version of SegNet, with F-score above 97%., Ministerio de Economía y Competitividad | Ref. BES-2014-067736, Xunta de Galicia | Ref. ED431C2016-038
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Application of MLS data to the assessment of safety-related features in the surrounding area of automaticallly detected pedestrian crossings

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Sánchez Rodríguez, Ana
  • González De Santos, Luis Miguel
During the last few years, there has been a huge methodological development regarding the automatic processing of 3D point cloud data acquired by both terrestrial and aerial mobile mapping systems, motivated by the improvement of surveying technologies and hardware performance. This paper presents a methodology that, in a first place, extracts geometric and semantic information regarding the road markings within the surveyed area from Mobile Laser Scanning (MLS) data, and then employs it to isolate street areas where pedestrian crossings are found and, therefore, pedestrians are more likely to cross the road. Then, different safety-related features can be extracted in order to offer information about the adequacy of the pedestrian crossing regarding its safety, which can be displayed in a Geographical Information System (GIS) layer. These features are defined in four different processing modules: Accessibility analysis, traffic lights classification, traffic signs classification, and visibility analysis. The validation of the proposed methodology has been carried out in two different cities in the northwest of Spain, obtaining both quantitative and qualitative results for pedestrian crossing classification and for each processing module of the safety assessment on pedestrian crossing environments., Ministerio del Interior | Ref. SPIP-2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598, Ministerio de Economía y Competitividad | Ref. BES-2014-067736
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic extraction of road features in urban environments using dense ALS data

  • Soilán Rodríguez, Mario
  • Truong Hong, Linh
  • Riveiro Rodríguez, Belén
  • Laefer, Debra
This paper describes a methodology that automatically extracts semantic information from urban ALS data for urban parameterization and road network definition. First, building façades are segmented from the ground surface by combining knowledge-based information with both voxel and raster data. Next, heuristic rules and unsupervised learning are applied to the ground surface data to distinguish sidewalk and pavement points as a means for curb detection. Then radiometric information was employed for road marking extraction. Using high-density ALS data from Dublin, Ireland, this fully automatic workflow was able to generate a F-score close to 95% for pavement and sidewalk identification with a resolution of 20 cm and better than 80% for road marking detection., Ministerio de Economía y Competitividad | Ref. TIN2013-46801-C4-4-R, Ministerio de Economía y Competitividad | Ref. BES-2014-067736, Fundación Barrié
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Automatic Parametrization and Shadow Analysis of Roofs in Urban Areas from ALS Point Clouds with Solar Energy Purposes

  • Soilán, Mario
  • Riveiro, Belén
  • Liñares-Méndez, Patricia
  • Padín Beltrán, Marta
[Abstract]: A basic feature of modern and smart cities is their energetic sustainability, using clean and renewable energies and, therefore, reducing the carbon emissions, especially in large cities. Solar energy is one of the most important renewable energy sources, being more significant in sunny climate areas such as the South of Europe. However, the installation of solar panels should be carried out carefully, being necessary to collect information about building roofs, regarding its surface and orientation. This paper proposes a methodology aiming to automatically parametrize building roofs employing point cloud data from an Aerial Laser Scanner (ALS) source. This parametrization consists of extracting not only the area and orientation of the roofs in an urban environment, but also of studying the shading of the roofs, given a date and time of the day. This methodology has been validated using 3D point cloud data of the city of Santiago de Compostela (Spain), achieving roof area measurement errors in the range of ±3%, showing that even low-density ALS data can be useful in order to carry out further analysis with energetic perspective., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through the project HERMES:S3D—Healthy and Efficient Routes in Massive Open-data based Smart Cities (Ref.: TIN201346801-C4-4-R) and Human Resources program FPI (Grant BES-2014-067736), Spanish Ministry of Interior (Grant SPIP2017-02122), Spanish Ministry of Economy, Industry and Competitiveness (Grant: EUIN2017-87598), and Xunta de Galicia through grant ED431C2016-038., Ministerio de Interior; SPIP2017-02122, Xunta de Galicia; ED431C2016-038
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Automatic Parametrization of Urban Areas Using ALS Data: The Case Study of Santiago de Compostela

  • Soilán, Mario
  • Riveiro, Belén
  • Liñares-Méndez, Patricia
  • Pérez Rivas, Andrea
[Abstract]: Nowadays, gathering accurate and meaningful information about the urban environment with the maximum efficiency in terms of cost and time has become more relevant for city administrations, as this information is essential if the sustainability or the resilience of the urban structure has to be improved. This work presents a methodology for the automatic parametrization and characterization of different urban typologies, for the specific case study of Santiago de Compostela (Spain), using data from Aerial Laser Scanners (ALS). This methodology consists of a number of sequential processes of point cloud data, using exclusively their geometric coordinates. Three of the main elements of the urban structure are assessed in this work: intersections, building blocks, and streets. Different geometric and contextual metrics are automatically extracted for each of the elements, defining the urban typology of the studied area. The accuracy of the measurements is validated against a manual reference, obtaining average errors of less than 3%, proving that the input data is valid for this assessment., This work has been partially supported by Human Resources program FPI (Grant BES-2014-067736), and Xunta de Galicia through grant ED431C2016-038., Xunta de Galicia; ED431C2016-038