Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic parametrization and shadow analysis of roofs in urban areas from ALS point clouds with solar energy purposes

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Liñares Méndez, Patricia
  • Padín Beltrán, Marta
A basic feature of modern and smart cities is their energetic sustainability, using clean and renewable energies and, therefore, reducing the carbon emissions, especially in large cities. Solar energy is one of the most important renewable energy sources, being more significant in sunny climate areas such as the South of Europe. However, the installation of solar panels should be carried out carefully, being necessary to collect information about building roofs, regarding its surface and orientation. This paper proposes a methodology aiming to automatically parametrize building roofs employing point cloud data from an Aerial Laser Scanner (ALS) source. This parametrization consists of extracting not only the area and orientation of the roofs in an urban environment, but also of studying the shading of the roofs, given a date and time of the day. This methodology has been validated using 3D point cloud data of the city of Santiago de Compostela (Spain), achieving roof area measurement errors in the range of ±3%, showing that even low-density ALS data can be useful in order to carry out further analysis with energetic perspective., Ministerio de Economía y Competitividad | Ref. BES-2014-067736, Xunta de Galicia | Ref. ED431C2016‐038, Ministerio de Economía y Competitividad | Ref. TIN201346801-C4-4-R, Ministerio del Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automated calibration of FEM models using LiDAR point clouds

  • Riveiro Rodríguez, Belén
  • Cubreiro, G.
  • Conde Carnero, Borja
  • Cabaleiro Alfaya, María
  • Lindenbergh, R.
  • Soilán Rodríguez, Mario
  • Caamaño Martinez, Jose Carlos
In present work it is pretended to estimate elastic parameters of beams through the combined use of precision geomatic techniques (laser scanning) and structural behaviour simulation tools. The study has two aims, on the one hand, to develop an algorithm able to interpret automatically point clouds acquired by laser scanning systems of beams subjected to different load situations on experimental tests; and on the other hand, to minimize differences between deformation values given by simulation tools and those measured by laser scanning. In this way we will proceed to identify elastic parameters and boundary conditions of structural element so that surface stresses can be estimated more easily., Ministerio de Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017- 87598, Ministerio de Educación, Cultura y Deporte | Ref. CAS15/00126, Xunta de Galicia | Ref. ED431C2016‐038
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Application of MLS data to the assessment of safety-related features in the surrounding area of automaticallly detected pedestrian crossings

  • Soilán Rodríguez, Mario
  • Riveiro Rodríguez, Belén
  • Sánchez Rodríguez, Ana
  • González De Santos, Luis Miguel
During the last few years, there has been a huge methodological development regarding the automatic processing of 3D point cloud data acquired by both terrestrial and aerial mobile mapping systems, motivated by the improvement of surveying technologies and hardware performance. This paper presents a methodology that, in a first place, extracts geometric and semantic information regarding the road markings within the surveyed area from Mobile Laser Scanning (MLS) data, and then employs it to isolate street areas where pedestrian crossings are found and, therefore, pedestrians are more likely to cross the road. Then, different safety-related features can be extracted in order to offer information about the adequacy of the pedestrian crossing regarding its safety, which can be displayed in a Geographical Information System (GIS) layer. These features are defined in four different processing modules: Accessibility analysis, traffic lights classification, traffic signs classification, and visibility analysis. The validation of the proposed methodology has been carried out in two different cities in the northwest of Spain, obtaining both quantitative and qualitative results for pedestrian crossing classification and for each processing module of the safety assessment on pedestrian crossing environments., Ministerio del Interior | Ref. SPIP-2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598, Ministerio de Economía y Competitividad | Ref. BES-2014-067736
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic measurement of water height in the As Conchas (Spain) reservoir using sentinel 2 and aerial LiDAR data

  • González Jorge, Higinio
  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • Sánchez Rodríguez, Ana
  • Lorenzo Cimadevila, Henrique Remixio
A methodology for the measurement of height in water reservoirs is developed. It is based on Sentinel 2 imagery and aerial LiDAR data. The methodology is automatized using Matlab software and focused on image processing techniques (equalization, binarization, and edge detection) combined with LiDAR data processing (near neighbour search and height averaging). It is applied in a region of interest selected by the user characterized by a water–land interface. Results are validated in the As Conchas water reservoir (Spain) using an in situ sensing system provided by the Hydrographic Miño-Sil Confederation. The duration of the experiment was one year. The Sentinel 2 bands B2, B3, B4, and B8 were tested during this study. The best results for water height evaluation were obtained for band B8 (842 nm) with an error of 0.20 m and a standard deviation of 0.17 m. The time resolution of the technique depends on the Sentinel 2 revisit time. The time resolution and height accuracy could be improved using complementary satellite systems, Xunta de Galicia | Ref. ED431C2016‐038, Ministerio de Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Automatic Parametrization and Shadow Analysis of Roofs in Urban Areas from ALS Point Clouds with Solar Energy Purposes

  • Soilán, Mario
  • Riveiro, Belén
  • Liñares-Méndez, Patricia
  • Padín Beltrán, Marta
[Abstract]: A basic feature of modern and smart cities is their energetic sustainability, using clean and renewable energies and, therefore, reducing the carbon emissions, especially in large cities. Solar energy is one of the most important renewable energy sources, being more significant in sunny climate areas such as the South of Europe. However, the installation of solar panels should be carried out carefully, being necessary to collect information about building roofs, regarding its surface and orientation. This paper proposes a methodology aiming to automatically parametrize building roofs employing point cloud data from an Aerial Laser Scanner (ALS) source. This parametrization consists of extracting not only the area and orientation of the roofs in an urban environment, but also of studying the shading of the roofs, given a date and time of the day. This methodology has been validated using 3D point cloud data of the city of Santiago de Compostela (Spain), achieving roof area measurement errors in the range of ±3%, showing that even low-density ALS data can be useful in order to carry out further analysis with energetic perspective., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through the project HERMES:S3D—Healthy and Efficient Routes in Massive Open-data based Smart Cities (Ref.: TIN201346801-C4-4-R) and Human Resources program FPI (Grant BES-2014-067736), Spanish Ministry of Interior (Grant SPIP2017-02122), Spanish Ministry of Economy, Industry and Competitiveness (Grant: EUIN2017-87598), and Xunta de Galicia through grant ED431C2016-038., Ministerio de Interior; SPIP2017-02122, Xunta de Galicia; ED431C2016-038