Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

UAV payload with collision mitigation for contact inspection

  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • González Jorge, Higinio
  • Navarro Medina, Fermín
  • Arias Sánchez, Pedro
This document presents a payload designed to perform semi-autonomous collision-mitigation inspection tasks on UAVs. This system features no external aid positioning the UAV such as the motion capture systems or the Global Navigation Satellite System (GNSS), which makes these inspections possible in the GNSS-denied areas. The payload is composed of two distance measuring units that calculate the range and angle between the UAV and the structure. The payload controller uses this information to calculate the pitch and yaw signal to control approach and contact. A hybrid automaton has been implemented, which represents the corresponding UAV states during the approach and the contact with different control strategies for each one. For this study, an ultrasonic contact sensor was used as an inspection sensor, but the system can work with any other contact sensor. This sensor measures the thickness of the metal sheets when is in contact with it. Various tests have been performed on the system with accurate results, demonstrating that the system can maintain stable contact with a vertical structure., Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Scan planning optimization for outdoor archaeological sites

  • Díaz Vilariño, Lucía
  • Frías Nores, Ernesto
  • Previtali, Mattia
  • Scaioni, Marco
  • Balado Frías, Jesús
The protection and management of archaeological sites require from a deep documentation and analysis, and although hand measuring and documentation is the cheapest way for collecting data, laser scanner has been gradually integrated for the geometrical data capture since point clouds have a high quality in terms of accuracy, precision and resolution. Although acquisition with laser scanner is considered a quick process, scan planning is of high relevance when considering outdoor archaeological sites because of their large size and complexity. In this paper, an automatic methodology to optimize the number and position of scans in order to obtain a point cloud of high quality in terms of data completeness is proposed. The aim of the methodology is to minimize the number of scans, minimizing at the same time the estimated surveying time and the amount of repetitive acquired data. Scan candidates are generated by using a grid-based and a triangulation-based distribution, and results show a faster analysis when triangulation is implemented. The methodology is tested into two real case studies from Italy and Spain, showing the applicability of scan planning in archaeological sites, Xunta de Galicia | Ref. ED481B 2016/079-0, Xunta de Galicia | Ref. ED431C 2016-038, Universidade de Vigo | Ref. 00VI 131H 641.02, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7, European Cooperation in Science and Technology (COST) | Ref. CA15201
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

New discretization method applied to NBV problem: semioctree

  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • González Jorge, Higinio
  • Díaz Vilariño, Lucía
  • Riveiro Rodríguez, Belén
This paper presents a discretization methodology applied to the NBV (Next Best View) problem, which consists of determining the heuristical best position of the next scan. This new methodology is a hybrid process between a homogenous voxelization and an octree structure that preserves the advantages of both methods. An octree structure is not directly applicable to the NBV problem: As the point cloud grows with every successive scanning, the limits and position of the discretization, octree structure must coincide, in order to transfer the information from one scan to the next. This problem is solved by applying a first coarse voxelization, followed by the division of each voxel in an octree structure. In addition, a previous methodology for solving the NBV problem has been adapted to make use of this novel approach. Results show that the new method is three times faster than the homogenous voxelization for a maximum resolution of 0.2m. For this target resolution of 0.2m, the number of voxels/octants in the discretization is reduced approximately by a 400%, from 35.360 to 8.937 for the study case presented., Xunta de Galicia | Ref. ED481B 2016/079-0, Ministerio de Economia, Industria y Competitividad | Ref. TIN2016- 77158-C4-2-R, Ministerio de Interior | Ref. SPIP2017-02122, Xunta de Galicia | Ref. ED431C 2016-038, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Autonomous point cloud acquisition of unknown indoor scenes

  • González De Santos, Luis Miguel
  • Díaz Vilariño, Lucía
  • Balado Frías, Jesús
  • Martínez Sánchez, Joaquín
  • González Jorge, Higinio
  • Sánchez Rodríguez, Ana
This paper presents a methodology for the automatic selection of heuristic scanning positions in unknown indoor environments. The surveying is carried out by a robotic system following a stop-and-go procedure. Starting with a random scan position in the room, the point cloud is discretized in voxels and they are submitted to a two-step classification and are labelled as occupied, occluded, empty, window, door, or exterior based on a visibility analysis. The main objective of the methodology is to obtain a complete point cloud of the indoor space and accordingly, the next best position is the scan position minimizing occluded voxels. Because the method locates doors and windows, the room can be delimited and the scan can continue for adjacent rooms. This approach has been tested in a real case study, in which three scans were developed., Xunta de Galicia | Ref. ED481B 2016/079-0, Ministerio de Economia, Industria y Competitividad | Ref. RTC-2016-5257-7, Ministerio de Economia, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Point clouds to direct indoor pedestrian pathfinding

  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Arias Sánchez, Pedro
  • Frías Nores, Ernesto
Increase in building complexity can cause difficulties orienting people, especially people with reduced mobility. This work presents a methodology to enable the direct use of indoor point clouds as navigable models for pathfinding. Input point cloud is classified in horizontal and vertical elements according to inclination of each point respect to n neighbour points. Points belonging to the main floor are detected by histogram application. Other floors at different heights and stairs are detected by analysing the proximity to the detected main floor. Then, point cloud regions classified as floor are rasterized to delimit navigable surface and occlusions are corrected by applying morphological operations assuming planarity and taking into account the existence of obstacles. Finally, point cloud of navigable floor is downsampled and structured in a grid. Remaining points are nodes to create navigable indoor graph. The methodology has been tested in two real case studies provided by the ISPRS benchmark on indoor modelling. A pathfinding algorithm is applied to generate routes and to verify the usability of generated graphs. Generated models and routes are coherent with selected motor skills because routes avoid obstacles and can cross areas of non-acquired data. The proposed methodology allows to use point clouds directly as navigation graphs, without an intermediate phase of generating parametric model of surfaces, Universidade de Vigo | Ref. 00VI 131H 641.02, Xunta de Galicia | Ref. ED481B 2016/079-0, Xunta de Galicia | Ref. ED431C 2016-038, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Scan planning and route optimization for control of execution of as-designed BIM

  • Díaz Vilariño, Lucía
  • Frías Nores, Ernesto
  • Balado Frías, Jesús
  • González Jorge, Higinio
Abstract. Scan-to-BIM systems have been recently proposed for the dimensional and quality assessment of as-built construction components with planned works. The procedure is generally based on the geometric alignment and comparison of as-built laser scans with as-designed BIM models. A major concern in Scan-to-BIM procedures is point cloud quality in terms of data completeness and consequently, the scanning process should be designed in order to obtain a full coverage of the scene while avoiding major occlusions. This work proposes a method to optimize the number and scan positions for Scan-to-BIM procedures following stop & go scanning. The method is based on a visibility analysis using a ray-tracing algorithm. In addition, the optimal route between scan positions is formulated as a travelling salesman problem and solved using a suboptimal ant colony optimization algorithm. The distribution of candidate positions follows a grid-based structure, although other distributions based on triangulation or tessellation can be implemented to reduce the number of candidate positions and processing time., Xunta de Galicia | Ref. ED481B 2016/079-0, Xunta de Galicia | Ref. ED431C 2016- 038, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158- C4-2-R, Ministerio de Economia, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

From BIM to scan planning and optimization for construction control

  • Frías Nores, Ernesto
  • Díaz Vilariño, Lucía
  • Balado Frías, Jesús
  • Lorenzo Cimadevila, Henrique Remixio
Scan planning of buildings under construction is a key issue for an efficient assessment of work progress. This work presents an automatic method aimed to determinate the optimal scan positions and the optimal route based on the use of Building Information Models (BIM) and considering data completeness as stopping criteria. The method is considered for a Terrestrial Laser Scanner mounted on a mobile robot following a stop & go procedure. The method starts by extracting floor plans from the BIM model according to the planned construction status, and including geometry and semantics of the building elements considered for construction control. The navigable space is defined from a binary map considering a security distance to building elements. After a grid-based and a triangulation-based distribution are implemented for generating scan position candidates, a visibility analysis is carried out to determine the optimal number and position of scans. The optimal route to visit all scan positions is addressed by using a probabilistic ant colony optimization algorithm. The method has been tested in simulated and real buildings under very dissimilar conditions and structural construction elements. The two approaches for generating scan position candidates are evaluated and results show the triangulation-based distribution as the more efficient approach in terms of processing and acquisition time, especially for large-scale buildings., Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7, Xunta de Galicia | Ref. ED481B 216/079-0
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic measurement of water height in the As Conchas (Spain) reservoir using sentinel 2 and aerial LiDAR data

  • González Jorge, Higinio
  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • Sánchez Rodríguez, Ana
  • Lorenzo Cimadevila, Henrique Remixio
A methodology for the measurement of height in water reservoirs is developed. It is based on Sentinel 2 imagery and aerial LiDAR data. The methodology is automatized using Matlab software and focused on image processing techniques (equalization, binarization, and edge detection) combined with LiDAR data processing (near neighbour search and height averaging). It is applied in a region of interest selected by the user characterized by a water–land interface. Results are validated in the As Conchas water reservoir (Spain) using an in situ sensing system provided by the Hydrographic Miño-Sil Confederation. The duration of the experiment was one year. The Sentinel 2 bands B2, B3, B4, and B8 were tested during this study. The best results for water height evaluation were obtained for band B8 (842 nm) with an error of 0.20 m and a standard deviation of 0.17 m. The time resolution of the technique depends on the Sentinel 2 revisit time. The time resolution and height accuracy could be improved using complementary satellite systems, Xunta de Galicia | Ref. ED431C2016‐038, Ministerio de Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7