Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure of Portland Cement Pastes Blended with Sonicated Silica Fume

  • Rodriguez Martinez, Erich David
  • Bernal, Susan A.
  • Provis, John L.
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
[EN] Application of power ultrasound to enhance dispersion of commercial densified silica fume leads to increased compressive strengths and refinement of the pore structure in mortars, compared with those that are untreated. This was attributed to the enhanced pozzolanic reactivity achieved by particle dispersion through sonication, leading to higher consumption of portlandite during curing, and formation of a calcium silicate hydrate gel with a higher degree of cross-linking than is identified in specimens with densified silica fume. This suggests that with the use of sonicated silica fume, it is possible to reduce the required quantity of admixture in blended cements to achieve specified performance, with the additional advantage of the formation of a highly densified structure and refined pore network, contributing to potential improvements in durability., This study was sponsored by the Ministerio de Ciencia e Innovacion of Spain (Project SILISONIC BIA-2007-63252 and research scholarships BES-2008-002440 and EEBB-2011-43847), the European regional development fund (FEDER), and the Universitat Politecnica de Valencia (Spain). Participation of SAB and JLP was funded by the Australian Research Council (ARC), including partial funding through the Particulate Fluids Processing Centre, a Special Research Centre of the ARC. The authors thank Dr. John Gehman for support in conducting the NMR experiments at the Bio21 Institute, University of Melbourne, Australia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of sonication on the reactivity of silica fume in portland cement mortars

  • Martínez Velandia, Diego Alfonso
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
Currently, the use of silica fume for the production of mortars and high-performance concrete is of great importance to the construction materials sector. Different applications of silica fume have generated extensive studies about its high reactivity as a pozzolanic material, in addition to its effect on the properties of some materials within which it is incorporated. In this study a sonication process was applied by means of which the deagglomeration of the larger particles of densi¿ed silica fume (CSF) was achieved. The result is a CSF treated with the ultrasound probe, which is obtained for different tests where the parameters of sonication such as sonication power level and sonication time are varied. This treatment makes it possible to increase the quantity of submicrometric particles in the sample. The effect of sonication process on CSF produces a greater quantity of very ¿ne particles, which improve the pozzolanic reactivity of silica fume and increase the ¿xation of hydrated lime. This behaviour also produces higher mechanical strength in mortars manufactured with sonicated silica fume (SSF). The mechanical strengths of SSF mortars were greater than those for control and CSF mortar. Different percentages of cement were substituted (between 0 and 15% by weight), and in all cases the SSF mortars showed important differences from the CSF mortar. It was observed that for the longest sonication times and highest sonication power levels, mechanical strengths were increased., The authors are grateful to the Spanish company Ferroatlantica S.L. for their financial support; to the Spanish Agency of International Cooperation and Development (AECID) for the doctorate grant to D.M.-V.; to the Spanish government for their support to the project BIA 2007-63252; and to FEDER for its financial support to our research projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increase of the reactivity of densified silica fume by sonication treatment

  • Rodríguez Martínez, Erich David
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
Five silica fumes from different manufacturers were subjected to ultrasonic treatment in order to decrease particle agglomeration and improve particle dispersion. The effectiveness of the sonication was observed as a reduction in particle size distribution of sonicated silica fume (SSF) compared to non-sonicated silica fume. SSF was added to Portland cement, and then the hydrated paste was analysed by thermogravimetric analyses (TGA/DTG) and scanning electron microscopy (SEM/EDX). The results were compared with those of control pastes made with untreated densified silica fume (DSF), as well as a reference cement paste of ordinary Portland cement (OPC). A maximum grade of de-agglomeration by the sonication was obtained, with a high volume of particles of diameter less than 1 mu m. Images obtained by transmission electron microscopy (TEM) of the SSF showed sintered particles that could not be fragmented by the treatment. Micro-structural characterisation results showed an increase in the reactivity of the silica fume after the treatment. (C) 2012 Elsevier B.V. All rights reserved., Acknowledgments to Ministerio de Ciencia e Innovacion (Project BIA-2007-63252 and research scholarship BES-2008-002440 and EEBB-2011-43847) of Spain, European regional development fund (FEDER), and Ferroatlantica I + D for the support on the development of this research. A special acknowledgement is also due to the Centre of Electron Microscopy of the Universitat Politecnica de Valencia.