Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Geopolymers based on spent catalyst residue from a fluid catalytic cracking (FCC) process

  • Rodriguez Martinez, Erich David
  • Bernal, Susan A.
  • Provis, John L.
  • Gehman, John D.
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
This paper assesses the use of alkali activation technology in the valorization of a spent fluid catalytic cracking (FCC) catalyst, which is a residue derived from the oil-cracking process, to produce geopolymer binders. In particular, the effects of activation conditions on the structural characteristics of the spent catalyst- based geopolymers are determined. The zeolitic phases present in the spent catalyst are the main phases participating in the geopolymerization reaction, which is driven by the conversion of the zeolitic material to a highly Al-substituted aluminosilicate binder gel. Higher alkali content and SiO2/Na2O ratio lead to a denser structure with a higher degree of geopolymer gel formation and increased degree of crosslinking, as identified through 29Si MAS NMR. These results highlight the feasibility of using spent FCC catalyst as a precursor for geopolymer production., This study was sponsored by research scholarship BES-2008-002440 and EEBB-2011-43847 from the Ministerio de Ciencia y Tecnologia of Spain, the European regional development fund (FEDER), and the Universitat Politecnica de Valencia (Spain). The participation of SAB and JLP was funded by the Australian Research Council through the Discovery Projects program, and also including partial funding through the Particulate Fluids Processing Centre, a Special Research Centre of the ARC. The authors wish to acknowledge the Advanced Microscopy Facility at The University of Melbourne for assistance with the electron microscopy experiments conducted in this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure of Portland Cement Pastes Blended with Sonicated Silica Fume

  • Rodriguez Martinez, Erich David
  • Bernal, Susan A.
  • Provis, John L.
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
[EN] Application of power ultrasound to enhance dispersion of commercial densified silica fume leads to increased compressive strengths and refinement of the pore structure in mortars, compared with those that are untreated. This was attributed to the enhanced pozzolanic reactivity achieved by particle dispersion through sonication, leading to higher consumption of portlandite during curing, and formation of a calcium silicate hydrate gel with a higher degree of cross-linking than is identified in specimens with densified silica fume. This suggests that with the use of sonicated silica fume, it is possible to reduce the required quantity of admixture in blended cements to achieve specified performance, with the additional advantage of the formation of a highly densified structure and refined pore network, contributing to potential improvements in durability., This study was sponsored by the Ministerio de Ciencia e Innovacion of Spain (Project SILISONIC BIA-2007-63252 and research scholarships BES-2008-002440 and EEBB-2011-43847), the European regional development fund (FEDER), and the Universitat Politecnica de Valencia (Spain). Participation of SAB and JLP was funded by the Australian Research Council (ARC), including partial funding through the Particulate Fluids Processing Centre, a Special Research Centre of the ARC. The authors thank Dr. John Gehman for support in conducting the NMR experiments at the Bio21 Institute, University of Melbourne, Australia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increase of the reactivity of densified silica fume by sonication treatment

  • Rodríguez Martínez, Erich David
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
Five silica fumes from different manufacturers were subjected to ultrasonic treatment in order to decrease particle agglomeration and improve particle dispersion. The effectiveness of the sonication was observed as a reduction in particle size distribution of sonicated silica fume (SSF) compared to non-sonicated silica fume. SSF was added to Portland cement, and then the hydrated paste was analysed by thermogravimetric analyses (TGA/DTG) and scanning electron microscopy (SEM/EDX). The results were compared with those of control pastes made with untreated densified silica fume (DSF), as well as a reference cement paste of ordinary Portland cement (OPC). A maximum grade of de-agglomeration by the sonication was obtained, with a high volume of particles of diameter less than 1 mu m. Images obtained by transmission electron microscopy (TEM) of the SSF showed sintered particles that could not be fragmented by the treatment. Micro-structural characterisation results showed an increase in the reactivity of the silica fume after the treatment. (C) 2012 Elsevier B.V. All rights reserved., Acknowledgments to Ministerio de Ciencia e Innovacion (Project BIA-2007-63252 and research scholarship BES-2008-002440 and EEBB-2011-43847) of Spain, European regional development fund (FEDER), and Ferroatlantica I + D for the support on the development of this research. A special acknowledgement is also due to the Centre of Electron Microscopy of the Universitat Politecnica de Valencia.