Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nuevos materiales absorbentes acústicos obtenidos a partir de restosde botellas de plástico

  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Ramis Soriano, Jaime
  • Sanchis Rico, Vicente Jorge
In the building acoustics field usually fibrous materials are used as sound absorbing materials. Nowadays polyester fiber is one of the most used but the pure chip of polyester has a problem. Polyester is obtained of petroleum and its price was increasing last years. This paper, presents an alternative polyester wool which obtained by PET treatment (recycle of plastic bottle's). Absorption coefficient values at normal incidence measured in reverberation chamber were compared (new wool obtained by PET method and materials obtained from pure chip of polyester).Furthermore, this paper propound a empiric model that describe the acoustic performance of this new wool. The results have been good. The pure fiber has been replaced by recycle fiber in its manufacture process., This work has been funded by the Ministry of Education and Science, DG RESEARCH (BIA2007-C02-01 and BIA2007-C02-02) and by the Foreign Office, in the Inter-University Cooperation and Scientific Research Programme (A/023748/09).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aplicación del Método de los Elementos Finitos para la Simulación de las Transmisiones por Flanco en Uniones con Suelos Flotantes, Application of the Finite Elements Method for the Simulation of Flanking Transmissions in Joints with Floating Floors

  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Ramis Soriano, Jaime
  • Escuder Silla, Eva María
[EN] This paper presents the use of the finite elements method to study the flanking transmission through the use of the vibration reduction index, for the case of constructive solutions that use floating floors. On one side, the insertion of elastic interlayer in new building solutions is now a very common practice. On the other side, the test procedures for the acoustic study of this kind of sets (concrete floor with elastic interlayer) are very laborious and the existing empirical equations do not match reality in many cases. For this reason, the study of the problem using finite elements would allows giving numerical solution to a wide range of different constructive solutions and numerical prediction for the acoustical isolation could be improved., [ES] En este trabajo se plantea el uso del método de los elementos finitos para el estudio de las transmisiones laterales a través del índice de reducción de vibraciones, para el caso de soluciones constructivas con suelos flotantes. Por una parte, la inserción de láminas elásticas en nuevas soluciones constructivas es en la actualidad una práctica muy común. Por otra parte, los procedimientos de ensayo para el estudio acústico de este conjunto (forjado con lámina elástica) son muy laboriosos y las ecuaciones empíricas existentes no satisfacen la realidad en muchos de los casos. Es por este motivo que se plantea el estudio mediante los elementos finitos, lo que nos permitirá dar solución numérica a un gran conjunto de diferentes soluciones constructivas y poder así mejorar las predicciones numéricas para el aislamiento acústico., Este trabajo ha sido financiado por el Ministerio de Educación y Ciencia de España (BIA2007-68098-C02-01 y BIA2007-68098-C02-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prediction Models of Airbone Sound Insulation of multilayer Materials with Viscoelastic Thin Sheets

  • Alba, Jesus|||0000-0002-4188-854X
  • del Rey, Romina|||0000-0001-5907-0677
  • Marant, Vincent François
  • Aguilera, Juan Luis
  • Ramis Soriano, Jaime
[EN] The growing introduction of new insulation materials in building acoustics has caused an increase of the importance of the prediction tools. Appropriate simulations allow strictly necessary laboratory measurements to be identified. In this way, costs are reduced. The demands of new legislation has resulted in the appearance of various software designed to facilitate prediction. The prediction models are based on different hypotheses: adaptation of impedances, spatial behaviour of spectral components, statistical energy distribution, the Finite Element Method (FEM), etc. Each of these models and methods offer advantages and contain limitations. In this paper, different models for prediction of sound insulation of multi-layer systems, are analysed. A method, based on adaptation of impedances is considered, and the results are compared with those obtained from FEM and also from experimental results. Adjustments are proposed to the models, to improve the prediction in certain frequency ranges., This work has received financial support from the Ministerio de Educacion y Ciencia - D.G. Investigacion (BIA2007-68098-C02-01 and BIA2007-68098-C02-02)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Inverse Method to Obtain Porosity, Fibre Diameterand Density of Fibrous Sound Absorbing Materials

  • Alba, Jesus|||0000-0002-4188-854X
  • del Rey, Romina|||0000-0001-5907-0677
  • Ramis Soriano, Jaime
  • Arenas, Jorge P.
Characterization of sound absorbing materials is essential to predict its acoustic behaviour. The most commonly used models to do so consider the flow resistivity, porosity, and average fibre diameter as parameters to determine the acoustic impedance and sound absorbing coefficient. Besides direct experimental techniques, numerical approaches appear to be an alternative to estimate the material's parameters. In this work an inverse numerical method to obtain some parameters of a fibrous material is presented. Using measurements of the normal incidence sound absorption coefficient and then using the model proposed by Voronina, subsequent application of basic minimization techniques allows one to obtain the porosity, average fibre diameter and density of a sound absorbing material. The numerical results agree fairly well with the experimental data., This work has been supported by the Ministerio de Educacion y Ciencia-D.G. Investigacion (BIA2007-68098-C02-01 and BIA2007-68098-C02-02) and also from the Spanish Ministry of Foreign Affairs and Cooperation through the Inter-University and Scientific Research Cooperation Program (A/023748/09).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propuesta de Fórmula Empírica para el Factor de Pérdidas

  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Juliá Sanchis, Ernesto|||0000-0003-2940-3906
  • Segura Alcaraz, Jorge Gabriel|||0000-0001-8296-3609
  • Ramis Soriano, Jaime
[EN] Noise transmitted by the sidewalls of buildings is essential to study the overall airborne sound insulation. For the determination of the lateral transmissions we must determine a parameter known as vibration reduction index. To obtain the value of the vibration reduction index to know the acoustic behaviour of the whole constructive, it is necessary to know the velocity level difference and the structural reverberation time. The indeterminations in the velocity level difference, or in the structural reverberation time will add diversions in the global determination of the isolation of the whole constructive. In the Standard UNE EN 12354-1:2000 there are empirical expressions for obtained the structural reverberation time. In the Standard UNE-EN ISO 10848-1:2007 there is a detailed procedure to determine experimentally the velocity level difference and the structural reverberation time, and to know the sidewalls transmissions. In this work, it is compared the structural reverberation time obtained by empirical expression and the structural reverberation time obtained experimentally, applying the normalized procedure. Based on this comparison we readjusted the empirical equations with a fundamental parameter; the loss factor. It is observed that the estimates do not reflect reality if we consider the same loss factor for all the structural elements, as it is allowed in the predictions of UNE EN 12354. © 2011 CIMNE (Universitat Politècnica de Catalunya). Published by Elsevier España, S.L. All rights reserved., [ES] La evaluación del ruido transmitido por flancos en edificación es esencial para el estudio del aislamiento a ruido aéreo. Desde el punto de vista numérico, para la determinación de las transmisiones laterales es necesario conocer un parámetro conocido como índice de reducción vibracional. Para obtener este parámetro con el objetivo de conocer el comportamiento acústico de todo el conjunto constructivo, es necesario conocer la diferencia de niveles de velocidad y el tiempo de reverberación estructural. Indeterminaciones bien en la diferencia de niveles de velocidad, bien en el tiempo de reverberación estructural supondrán desviaciones en la determinación del aislamiento global de todo el conjunto constructivo. Existen normativas (UNE EN 12354-1:2000) que ofrecen expresiones empíricas para obtener el tiempo de reverberación estructural. Otras (UNE-EN ISO 10848-1:2007) ofrecen un procedimiento detallado para determinar experimentalmente la diferencia de niveles de velocidad y el tiempo de reverberación estructural, y así poder conocer las transmisiones por flancos. En este trabajo se compara el tiempo de reverberación estructural que se obtiene mediante las expresiones empíricas con el tiempo de reverberación estructural que se obtiene experimentalmente, aplicando el procedimiento de medida normalizado. Basándonos en estas comparaciones se reajustan las ecuaciones empíricas con un parámetro fundamental: el factor de pérdidas. Se observa que las estimaciones no reflejan la realidad si tenemos en cuenta el mismo factor de pérdidas para todos los distintos elementos estructurales, tal y como se permite en las predicciones de la UNE EN 12354. © 2011 CIMNE (Universitat Politècnica de Catalunya). Publicado por Elsevier España, S.L. Todos los derechos reservados., Este trabajo ha sido financiado por el Ministerio de Educación y Ciencia (BIA2007-68098-C02-01 y BIA2007-68098-C02-02) y por el Ministerio de Ciencia e Innovación (BIA2010-17723).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nuevos materiales absorbentes acústicos basados en fibra de kenaf

  • Ramis Soriano, Jaime
  • Escuder Silla, Eva María
  • Sanchis Rico, Vicente Jorge
  • Alba, Jesus|||0000-0002-4188-854X
  • del Rey, Romina|||0000-0001-5907-0677
Acoustic Standards in the building are responsible for, companies and individuals, propose new acoustic materials for the sound isolation. This paper presents a new sound-absorbent material, it is based on natural fibres, particularly fibres of kenaf. It also proposes an empirical model for this material, this models depends on the frequency. There are accepted models from the scientific community about mineral wool, glass wool, rock wool, foam or polyester fibre. Several of these models are empirical. They are obtained from the equation adjustments about the acoustic impedance and propagation constant behaviour, depending upon the flow resistivity, fibre's diameter and density. There are even standards like UNE-EN 12354-6 where these models are accepted under certain limitations like the fundamental basis as in the materials' acoustics behaviour prediction. From the various tests conducted in the laboratory, empirical equations are proposed for this new acoustic material. In addition, there has been a first approach to validate this model in combination with a micro-structural model, based on the steps taken by Bies-Hansen (1), which allows us to obtain the value of the resistance to flow., This project has been funded by the Ministry of Education and Science. DG Research (BIA2007-C02-01 y BIA2007-C02-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of impervious layers using scale models and an inverse method

  • Alba, Jesus|||0000-0002-4188-854X
  • del Rey, Romina|||0000-0001-5907-0677
  • Escuder Silla, Eva María
  • Ramis Soriano, Jaime
We describe a novel procedure that uses an inverse method to determine unknown parameters for impervious layers used in multilayer structures. The proposed model of the multilayer structure is limited to an ideal double plate separated by an unbonded, fibrous, sound-absorbing material. Experimental data were obtained by nearfield acoustic holography for the calculation of the transmission loss of various multilayer structures mounted in a window in a wooden box designed specifically for this purpose. We used the Trochidis and Kalaroutis forecast model of acoustic insulation for multilayer structures, which is based on a spatial Fourier transform. The experimental pressure and velocity data were used as input data in the inverse method. By applying the Trochidis and Kalaroutis model and using numerical methods to adjust the variables that define the impervious layers of the system, the values of the unknown parameters of the layers could then be calculated. For validation, the results were compared with results obtained using the Ookura and Saito model, based on impedance coupling between layers and using the statistical-energy-analysis model, which subdivides the system into subsystems. We evaluate the measurement errors associated with the construction of a hologram by nearfield acoustic holography, i.e., errors due to sensor mismatch and position mismatch, in terms of their probabilities. © 2009 Elsevier Ltd. All rights reserved., This work was supported by the Ministry of Education and Science (BIA2007-68098-C02-01 and BIA2007-68098-C0202), by Conselleria de Empresa, Universidad y Ciencia (APOSTD/2007/112) and by Conselleria de Educacion de la Generalitat Valenciana (GVPRE/2008/115).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influencia del ángulo limite en la predicción del índice de reducción sonora

  • Alba, Jesus|||0000-0002-4188-854X
  • del Rey, Romina|||0000-0001-5907-0677
  • Ramis Soriano, Jaime
  • Escuder Silla, Eva María
[ES] Este trabajo se inscribe en el contexto del esfuerzo por acotar incertidumbres en las predicciones del aislamiento acústico. El objeto del mismo es cuantificar la incertidumbre asociada a la elección del ángulo límite al realizar predicciones del Índice de reducción sonora de una partición. En él se realiza una valoración de la incertidumbre, tanto en función de la frecuencia, como del parámetro ponderado global en decibelios A. El estudio se concreta para el caso de materiales de uso común en la edificación y para el caso de una placa delgada, infinita y elástica, de forma que separa dos regiones del espacio sin que haya conexión alguna entre ambas. La importancia de este término queda reflejada en la cuantificación que se realiza de la incertidumbre para ciertos materiales y ángulos para los cuales puede ser del orden de 3 dB(A)., [EN] This work is done in the context of trying to limit the uncertainties in the predictions of the acoustic isolation. Our aim is to quantify the uncertainty due to the choice of the limit angle on the prediction of the Transmission Loss of a partition. We have evaluated how this uncertainty depends on the frequency and on the weighted global parameter in dB(A). Specifically, we have studied in this work material of common use in building and the case of a thin, infinite, and elastic plate that separates two regions of the space without connection between them. The importance of the choice of the limit angle is reflected in the quantification of the uncertainty for certain materials and angles, for which it can be of the order of 3 dB(A)., Este trabajo ha sido financiado por el MINISTERIO DE EDUCACION Y CIENCIA -D.G. INVESTIGACION (BIA2007-68098-C02-01 y BIA2007-68098-C02-02)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vibration Reduction Index of a T-Junction With a Flexible Interlayer

  • Alba, Jesus|||0000-0002-4188-854X
  • del Rey, Romina|||0000-0001-5907-0677
  • Escuder Silla, Eva María
  • Ramis Soriano, Jaime
  • Segovia, Enrique
[EN] This paper describes the procedure followed to evaluate the vibration reduction index for T-junctions with inserted flexible elements and proposes new equations to complement the standard EN 12354-1:2000. The experiment described in this work is based on a 1:3 scale model of a T-junction with a flexible interlayer. It was used to obtain a significant reduction in the cost of the configurations under study. We chose to carry out vibration measurements by near-field acoustic holography (NAH) in order to avoid the risk of accelerometer interference. Flanking transmission was determined for different elastic layers with the objective of quantifying the effect of the flexible interlayer and to compare the results obtained with predictive formulas. The results enabled us to propose new equations to complement EN 12354-1:2000 for the reliable prediction of the apparent sound reduction index. The uncertainty associated with the different average velocity levels is determined according to the Guide for the Expression of Uncertainty of Measurement (GUM). © 2012 American Society of Mechanical Engineers., This work was supported by the Spanish Ministry of Science and Innovation (BIA2007-68098-C02-01 and BIA2007-68098-C02-02) and also by the Conselleria de Empresa Universidad y Ciencia (APOSTD/2007/112).