Pasar al contenido principal

HORMIGONES RECICLADOS AUTOCOMPACTANTES ROBUSTOS: REOLOGIA EN ESTADO FRESCO Y PROPIEDADES MECANICAS

BIA2014-58063-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDADE DA CORUÑA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Cajas de trabajabilidad como herramienta de diseño de hormigones autocompactantes con árido reciclado

  • González Taboada, Iris
  • González Fonteboa, Belén
  • Martinez Abella, Fernando
  • Varela Puga, Fernando
[ES] En este trabajo se diseñan siete hormigones autocompactantes convencionales y de cada uno de ellos se obtienen tres hormigones autocompactantes con árido grueso reciclado de hormigón (utilizando sustituciones del 20%, 50% y 100% en volumen). Las mezclas recicladas se fabrican utilizando el árido reciclado seco y con un 3% de humedad natural, añadiendo, en ambos casos, una cantidad de agua extra durante el amasado para compensar la elevada absorción de este tipo de árido. Todos los hormigones se ensayan en estado fresco mediante ensayos empíricos y reológicos a los 15 y 45 minutos del contacto entre cemento y agua. Los resultados indican que las relaciones entre diferentes parámetros de comportamiento en fresco en los hormigones autocompactantes reciclados (HACRs) siguen las mismas tendencias que las observadas en los hormigones autocompactantes convencionales. Para facilitar el diseño de estos HACRs, se proponen unas regiones de trabajabilidad definidas por aquellas mezclas que cumplen una serie de combinaciones de parámetros empíricos. Estas regiones permiten delimitar una caja de trabajabilidad (área en el reograma tensión de flujo estática y viscosidad plástica) en la que se garantiza que los HACRs que se sitúen en ella cumplen diferentes límites empíricos., Este estudio es parte de dos proyectos titulados: (a) “Investigación industrial sobre Hormigones para un Mercado Sostenible (InHorMeS)” financiado por la Axencia Galega de Innovación (Ref: IN852A 2013/57); (b) “Hormigones reciclados autocompactantes robustos: reología en estado fresco y propiedades mecánicas (HORREO)” financiado por el Ministerio de Economía y Competitividad (Ref: BIA2014-58063-R). Además, este trabajo fue posible gracias al apoyo de una beca predoctoral de la Xunta de Galicia (España).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de las variaciones en los materiales sobre la reología de hormigones autocompactantes reciclados

  • González Taboada, Iris
  • González Fonteboa, Belen
  • Martinez Abella, Fernando
  • Rojo López, Gemma
[ES] Este trabajo se centra en el análisis de la influencia de las variaciones de materiales sobre el comportamiento reológico de los hormigones autocompactantes fabricados con árido grueso reciclado. Se diseña un hormigón autocompactante patrón y tres reciclados con porcentajes de sustitución del 20%, 50% y 100% en volumen. Asimismo, en cada una de estas mezclas se aplican variaciones en el contenido de agua, superplastificante y cemento para simular los errores que se producen en las plantas de fabricación: ± 3% en el agua, ± 5% en el superplastificante y ± 3% en el cemento. Todos los hormigones se estudian en estado fresco mediante los ensayos reológicos stress growth test y flow curve test. Mediante reógrafos se evalúan los cambios reológicos que los incrementos o decrementos de agua, superplastificante o cemento pueden ocasionar. Los resultados permiten estudiar a qué variación de material es más sensible un hormigón autocompactante reciclado (HACR) y qué porcentajes de árido reciclado sería más recomendable utilizar para obtener un hormigón robusto., Este estudio es parte de los proyectos (a) “Investigación industrial sobre Hormigones para un Mercado Sostenible (InHorMeS)” financiado por la Axencia Galega de Innovación (Ref: IN852A 2013/57); y (b) “Hormigones reciclados autocompactantes robustos: reología en estado fresco y propiedades mecánicas (HORREO)” financiado por el Ministerio de Economía y Competitividad (Ref: BIA2014-58063-R). Además, este trabajo fue posible gracias al apoyo de una beca predoctoral de la Xunta de Galicia (España).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Rheology, Durability, and Mechanical Performance of Sustainable Self-Compacting Concrete With Metakaolin and Limestone Filler

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • González-Taboada, Iris
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] This study analyzed the performance of self-compacting concrete with a paste composition that includes limestone filler and metakaolin replacing cement to design binary (75% cement and 25% limestone filler) and ternary binders (60% cement, 25% limestone filler and 15% metakaolin). Furthermore, to analyze the effect of the solid volume fraction (volume of sand and coarse aggregate) on concrete rheology, the concretes were designed using four volumes of paste (350 l, 400 l, 450 l and 500 l). Rheological tests were performed at three resting times to measure the viscosity and yield stress over time. The results indicated that the viscosity decreased by 43.3% when the cement was replaced by limestone filler and increased by 73.1% when the cement was replaced by 15% metakaolin while maintaining the limestone filler. These values were obtained as 27.6% and 62.2%, respectively, when the yield stress was analyzed. In addition, the hardened properties (mechanical behavior and durability) were studied by measuring the strengths at 28 days, as well as the electrical resistivity and ultrasonic pulse velocity over time. In this case, at 28 days the use of binary binder reduces the strength and resistivity (about 20%) and the employment of ternary binder reduces strength (15%) while increases the resistivity up to the double (when compared to the 100 C concrete). Moreover, to measure the efficiency of the concrete, a material index was designed that considers the fresh behavior, mechanical performance, durability, cost, and environmental impact. Self-compacting concretes with ternary binders provided the highest indices. The use of alternative materials, particularly metakaolin has been proven to be a good option to enhance concrete sustainable performance., The study is part of two projects entitled: “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (Ref: BIA2014-58063-R)” and “Sustainable High Performance Self-Compacting Concrete using low clinker cement, and integral curing and self-healing agents (HACCURACEM) (BIA2017-85657-R)” funded by MINECO. Moreover, this work was also made possible by the financial support of a pre-doctoral grant of MINECO (FPI 2015- ref BES-2015-071919) and two grants for international pre-doctoral stays: (a) FPI 2015 and (b) IACOBUS program for “Galicia–North of Portugal Euroregion”
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Thixotropy and interlayer bond strength of self-compacting recycled concrete

  • González-Taboada, Iris
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Seara Paz, Sindy
Versión aceptada de https://doi.org/10.1016/j.conbuildmat.2017.11.157, [Abstract:] This work is focused on assessing the thixotropy of self-compacting recycled concrete (SCRC) and on evaluating the interlayer bond strength. To do so, four SCRC mixes with 0%, 20%, 50%, and 100% of recycled coarse aggregate (by volume) were studied. This aggregate was used in dry-state conditions and an extra quantity of water was added during mixing in order to compensate its absorption. Three testing methods were used to assess the degree of thixotropy of SCRC: structural breakdown curves at various rotational speeds, hysteresis loop flow curves and yield stress at rest. To evaluate the effect of the structural build-up at rest on SCRC interlayer bond strength, two methods were used: flexural tests and water permeability tests. The results indicate that the increase of thixotropy and interlayer bond strength with the replacement percentage is due to the difference in the effective w/c ratio, result of the non–compensated water absorption, to the higher amount of fines in the recycled aggregates and generated from the old adhered mortar and also to the higher internal friction of recycled aggregates. Moreover, as water absorption is compensated in the mixing protocol, changes over time in the effective w/c ratio are negligible. Therefore, the thixotropic changing rate is similar in all studied mixes., The study is part of three projects entitled: (a) “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties” (Ref: BIA2014-58063-R)” funded by MINECO; (b) “Valorisation of thermal coal ashes throughout the development of materials and products in the field of the civil engineering and building eco-construction (CENICIENTA)”; (c) “Design of Eco-products made with cement-base materials. Application to inside building furniture (DECOCEM)”. This work was also possible by the financial support of a pre-doctoral grant of Xunta de Galicia (Spain), including the INDITEX-UDC 2015 grant for international pre-doctoral stays and the UDC grant for international post-doctoral stays.
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

Research and New Smart Techniques on the Characterisation of New Self-compacting Concrete with Industrial Wastes and Fibres to Increase its Sustainability and Service Life, Investigación e novas técnicas intelixentes na caracterización de novos formigóns autocompactantes con residuos industriais e fibras para aumentar a súa sustentabilidade e vida útil

  • Rojo-López, Gemma
[Resumo] Este traballo aborda o desenvolvemento de mesturas autocompactantes coa incorporación de materiais suplementarios procedentes de residuos industriais como substitutos de cemento para aumentar a sustentabilidade, así como a introdución de fibras para aumentar a vida útil das mesturas. Estes materiais propostos son cinza de biomasa e po de granito, que se consideran residuos industriais na "Eurorrexión Galicia-Norte de Portugal" e son abundantes. Dada a crecente presión social cara á xestión sostible dos residuos e a eficiencia dos recursos, o uso destes materiais suplementarios procedentes de residuos industriais axuda a alcanzar os obxectivos de mitigación de CO2 avanzando cara a unha economía circular. Neste sentido, este estudo desenvolveuse a nivel de pasta, morteiro e formigón, deseñando diferentes mesturas de base cemento e analizando o seu comportamento mediante técnicas de extracción de coñecemento e reoloxía para obter parámetros óptimos de dosificación. Ademais, para aumentar a vida útil das mesturas propostas, estudouse a inclusión de fibras metálicas e de polipropileno. Os resultados obtidos permitiron concluír que o uso de materiais cementantes suplementarios para aumentar a sustentabilidade das mesturas autocompactantes é unha boa opción. Ademais, a inclusión de fibras proporciona beneficios tanto ambientais como económicos sen inconvenientes significativos no comportamento fresco e endurecido dos formigóns., [Resumen] Este trabajo aborda el desarrollo de mezclas autocompactantes con la incorporación de materiales suplementarios procedentes de residuos industriales como sustitutos de cemento para aumentar la sostenibilidad, así como la introducción de fibras para aumentar la vida útil. Estos materiales propuestos son ceniza de biomasa y polvo de granito, que se consideran residuos industriales en la "Eurorregión Galicia-Norte de Portugal" y son abundantes. Dada la creciente presión social hacia la gestión sostenible de los residuos y la eficiencia de los recursos, el uso de estos materiales suplementarios procedentes de residuos industriales ayuda a alcanzar los objetivos de mitigación de CO2 avanzando hacia una economía circular. En este sentido, este estudio se ha desarrollado a nivel de pasta, mortero y hormigón, diseñando diferentes mezclas de base cemento y analizando su comportamiento mediante técnicas de extracción de conocimiento y reología para obtener parámetros óptimos de dosificación. Además, para aumentar la vida útil de las mezclas propuestas, se estudió la inclusión de fibras metálicas y de polipropileno. Los resultados obtenidos permitieron concluir que el uso de materiales cementantes suplementarios para aumentar la sostenibilidad de las mezclas autocompactantes es una buena opción. Además, la inclusión de fibras proporciona beneficios tanto medioambientales como económicos sin inconvenientes significativos en el comportamiento fresco y endurecido de los hormigones., [Abstract] This work addresses the development of self-compacting mixtures with the incorporation of supplementary materials from industrial waste as cement substitutes to increase sustainability, as well as the introduction of fibres to increase the service life of the mixtures. These proposed materials are biomass ash and granite powder, which are abundantly available and considered wastes from the local industry in the “Galicia–North of Portugal Euroregion”. Given the rising social pressure towards sustainable waste management and resource efficiency, the use of supplementary cementitious materials coming from industrial wastes helps to achieve CO2 mitigation goals advancing towards a circular economy. In this regard, this study was developed at the paste, mortar and concrete level, designing different cement-based mixtures and analysing their performance through knowledge extraction techniques and rheology to obtain the optimum dosage parameters. In addition, to increase the service life of the proposed mixtures, the inclusion of metallic and polypropylene fibres was studied. The results obtained led to the conclusion that the use of supplementary cementitious materials to increase the sustainability of self-compacting mixes is a good option. Moreover, the inclusion of fibres provides both environmental and economic gains without significant drawbacks in the fresh and hardened behaviour of the concretes., Este traballo desenvolveuse no marco do proxecto HORREO (Hormigones reciclados autocompactantes robustos: reología en estado fresco y propiedades mecánicas-BIA2014-58063-R) financiado polo Ministerio de Economía e Competitividade que contaba tamén con un contrato predoutoral para a formación de doutores (FPI, BES-2015-071919) que puiden desfrutar durante 4 anos. Para acadar a mención internacional teño que agradecer ao programa de estadías breves da FPI e ao programa IACOBUS pola financiación recibida para realizar dúas estadías de 3 meses na Facultade de Engenheria da Universidade do Porto (FEUP). Ademais, este traballo enmárcase tamén nos seguintes proxectos: Eco3DConcrete (Diseño de hormigón más sostenible para impresión 3D basado en la reología y el control de propiedades a muy cortas edades - PID2020-115433RB-I00), PREHEALING (Diseño de prefabricados de hormigón empleando estrategias sostenibles de auto reparación para incremento de su vida útil - PDC2021-121660-I00) e 3DHealConcrete (Aprovechamiento de sinergias entre las tecnologías de impresión 3D y estrategias de autorreparacion con bacterias para el diseño de hormigones sostenibles y durables -TED2021-129757B-I00) todos eles financiados polo Ministerio de Economía e Competitividade.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Valorização de resíduos de biomassa e da extração de pedra natural no fabrico de betão autocompactável, Valorisation of biomass ash and granite powder in the production of self-compacting concrete

  • Rojo-López, Gemma
  • Nunes, Sandra
  • Martínez-Abella, Fernando
  • González-Fonteboa, Belén
[Resumo] O presente trabalho visa explorar a viabilidade da incorporação simultânea de cinzas da biomassa e de pó-de-pedra em betão autocompactável, ambos resíduos gerados por setores industriais instalados na Eurorregião Galiza-Norte de Portugal. Foi desenvolvido um programa experimental segundo um plano fatorial, ao nível da argamassa, como uma fase do estudo que antecede o estudo ao nível do betão. Para cada mistura do plano, foram analisadas diversas propriedades da argamassa, nomeadamente, para caraterizar a respetiva trabalhabilidade, resistência mecânica e durabilidade. Com este estudo demonstrou-se que o pó-de-pedra e a cinza da biomassa podem ser incorporados em conjunto para produzir BACs de elevada deformabilidade, sem risco de segregação. Simultaneamente, ao substituir uma parte do cimento por metacaulino foi possível melhorar significativamente as propriedades do BAC no estado endurecido (maior resistência à compressão, maior resistividade e menor porosidade acessível à àgua), enquanto se reduzem as emissões de CO2 pelo uso de menos cimento., [Abstract] The present work aims to explore the feasibility of incorporating biomass ash and granite powder, wastes generated by two industrial sectors operating in the Galicia-North of Portugal Euroregion, in self-compacting concrete. An experimental program was developed according to a factorial plan, at the mortar level, as a step before the study at the concrete level. For each mixture in the plan, several properties of the mortar were analysed, namely to characterise the workability, mechanical strength and durability. This study shows granite powder and biomass ash can be incorporated together to produce SCCs of high deformability, without risk of segregation. At the same time, by replacing a fraction of the cement with metakaolin, it was possible to significantly improve the properties of SCC in the hardened state (higher compressive strength, higher resistivity and lower porosity accessible to water), while reducing CO2 emissions due to lower cement content., Este trabalho foi financiado por: Unidade de Investigação UID/ECI/04708/2019 – CONSTRUCT - Instituto de I&D em Estruturas e Construções – financiada por fundos nacionais através da FCT/MCTES (PIDDAC). Este trabalho foi apoiado pelo programa IACOBUS - Programa de Cooperação Cultural, Científica e Pedagógica para Mobilidade Pré-doutoral, e pelos projetos BIA 2014-58063-R (HORREO) e BIA 2017-85657-R (HACCURACEM) del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, MINECO., Portugal. Instituto de I&D em Estruturas e Construções; UID/ECI/04708/2019
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Flexural performance of reinforced concrete beams made with recycled concrete coarse aggregate

  • Seara Paz, Sindy
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Eiras López, Javier
Versión aceptada de https://doi.org/10.1016/j.engstruct.2017.11.015, [Abstract:] This work deals with the flexural performance of recycled concrete subjected to increasing loads up to failure. For this purpose, eight reinforced concrete beams were made with recycled coarse aggregates using two different water to cement ratios (0.50 and 0.65) and four replacement percentages (0%, 20%, 50% and 100%). Firstly, the basic concrete properties were determined (mechanical strengths and modulus of elasticity) and then, beam specimens were loaded up to failure using a four-point bending test at 28 days. As a result, bending moments, deflections, strains and curvatures were obtained at different load levels (cracking, service, yielding and ultimate state conditions), and also, the crack pattern. On the basis of these results, it can be noted that service, yielding and ultimate state of recycled concrete exhibits, in general, a similar trend to that of conventional concrete. However, the cracking behaviour shows differences between recycled and conventional concrete. Finally, code-based expressions were used to calculate bending moments and deflections under flexural load, taking into account the different content of recycled coarse aggregate., The study is part of the projects entitled: CLEAM: Clean, efficient and nice construction along its life cycle” funded by the Centre for the Technology and Industrial Development (CDTI) and led by the Group of Economical Interest CLEAM-CENIT, AIE comprising by the country’s largest construction companies (Acciona, Dragados, Ferrovial, FCC, Isolux Corsán, OHL and Sacyr) and some PYME (Informática 68, Quilosa and Martínez Segovia y asociados). HORREO “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (Ref: BIA2014-58063-R)” funded by MINECO.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Evaluation of self-compacting recycled concrete robustness by statistical approach

  • González-Taboada, Iris
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Seara Paz, Sindy
Versión aceptada de https://doi.org/10.1016/j.conbuildmat.2018.05.059, [Abstract:] The use of self-compacting recycled concrete appears as to be a very interesting technology for the sustainable construction future. However, one of the major obstacles to a more widespread use of self-compacting concrete is to obtain a robust material. Therefore, the emphasis of this work is placed on analysing both practice and theory to understand the properties that control and assess self-compacting recycled concrete robustness. Hence, forty-nine different mixes were produced with several replacement percentages of recycled concrete coarse aggregate (0, 20, 50 or 100%) and with two different mixing procedures (all aggregates in dry-state conditions or recycled aggregate with a 3% of natural moisture). The experimental program consisted of making, in the fresh state, rheological tests (a stress growth test and a flow curve test) and empirical characterization tests (slump flow, V-funnel, L-box, J-Ring and sieve segregation) at 15, 45 and 90 min from cement-water contact. In the hardened state, compressive strength was measured at 3, 7 and 28 days. All results were analysed using a statistical approach based on Kendall’s coefficient of concordance and Spearman’s rank correlation. This approach allowed us to successfully identify six key properties that can be measured to evaluate SCRC robustness (capacity of the material to tolerate certain variations in material characteristics and mixture parameters). For each mix, a ranking that defines its robustness category was obtained by considering all properties. Also, it showed that water control is the key factor that affects SCRC robustness., The study is part of two projects entitled: (a) “Industrial Investigation about Concrete for a Sustainable Market (InHorMeS)” funded by the Innovation Galician Agency; (b) “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (Ref: BIA2014-58063-R)” funded by MINECO.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Quaternary blends of portland cement, metakaolin, biomass ash and granite powder for production of self-compacting concrete

  • Rojo-López, Gemma
  • Nunes, Sandra
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
[Abstract:] Given the rising societal pressure towards sustainable waste management and resource efficiency, in a more circular economy, an increased use and diversification of supplementary cementitious materials (SCM) will be necessary to achieve the CO2 mitigation goals. The current study addresses the development of self-compacting concrete, replacing part of the cement (the primary source of CO2 emissions) by metakaolin and wastes derived from two industrial sectors operating in the “Galicia–North of Portugal Euroregion”: wood manufacturing and natural stone quarrying. A study was carried out at the mortar level to investigate the effect of the mix design variables on several engineering properties of the self-compacting concrete. Statistically designed experiments reveal that an increase in water/powder volume ratio has a dominant effect on the fresh state properties, whereas the water/cement weight ratio has a dominant effect on the hardened state properties. A like-for-like comparison of the proposed quaternary blends and previously studied binary/ternary blends indicates that these mixtures exhibit improved self-compacting ability, greater compressive strength, and can offer interesting opportunities to reduce the unit cost and environmental impact of self-compacting concrete per m3. Four different mortar mixtures were optimised to achieve excellent self-compacting ability yet with distinct compressive strength levels at 28 days (65, 70, 75, and 80 MPa). A single measure of the material efficiency is proposed herein to reflect the engineering properties improvement (workability, compressive strength, and durability) over its economic (unit cost) and environmental impact., This work was financially supported by: Base Funding - UIDB/04708/2020 and Programmatic Funding - UIDP/04708/2020 of the CONSTRUCT - Instituto de I&D em Estruturas e Construções - funded by national funds through the FCT / MCTES (PIDDAC); by the INBRAIL project - POCI-01-0247-FEDER-033990 funded by FEDER funds through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI) and Programa Operacional da Região de Lisboa within Sistema de Incentivos à Investigação e Desenvolvimento (SI IDT) from Portugal (2020) “Projetos I&DT Empresas em Co promoção”. The study is part of two projects entitled: “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (Ref: BIA2014-58063-R)” and “Sustainable High Performance Self-Compacting Concrete using low clinker cement, and integral curing and self-healing agents (HACCURACEM) (BIA2017-85657-R)” funded by MINECO. Moreover, this work was also made possible by the financial support of a pre-doctoral grant of MINECO (FPI 2015) and two grants for international pre-doctoral stays: (a) FPI 2015 and (b) IACOBUS program for “Galicia–North of Portugal Euroregion”., Portugal. Instituto de I&D em Estruturas e Construções; UIDB/04708/2020, Portugal. Instituto de I&D em Estruturas e Construções; UIDP/04708/2020, Portugal. Programa Operacional Competitividade e Internacionalização; POCI-01-0247-FEDER-033990
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Robustness of self-compacting recycled concrete: analysis of sensitivity parameters

  • González-Taboada, Iris
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Roussel, Nicolas
This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1617/s11527-017-1136-1, Esta versión del artículo ha sido aceptada para su publicación, después de la revisión por pares (cuando proceda) y está sujeta a las condiciones de uso de AM de Springer Nature, pero no es la Versión del Registro y no refleja las mejoras posteriores a la aceptación, ni ninguna corrección. La versión oficial está disponible en línea en: https://doi.org/10.1617/s11527-017-1136-1, [Abstract:] This work is focused on understanding the origin of the lower robustness detected in self-compacting recycled concretes and on identifying the parameters affecting this property to a greater extent. A reference concrete (0%) and three recycled concretes were studied. The replacement percentages of natural with recycled coarse aggregate were 20, 50 and 100% (by volume). Each baseline mix was modified using two levels of water (± W: − 3, + 3%), two levels of superplasticizer (± S: − 5, + 5%) and two levels of cement (± C: − 3, + 3%). The analysis is focused on the sensitivity parameters calculated with the variations of the results of different tests obtained with the modified mixes. Four industrial tests and two rheological tests were made at a mix age of 15 and 45 min. It could be concluded that self-compacting recycled concretes present the “Rheological parameter—∅/∅max” curves with higher slope than the ones of conventional self-compacting concrete. Then, when high percentages of recycled coarse aggregate are used, and when long term self-compacting behaviour is required, there is a greater possibility to reach the high slope region of high slope curves causing high rheological changes and low robustness., The study is part of two projects entitled: (a) “Industrial Investigation about Concrete for a Sustainable Market (InHorMeS)” funded by the Innovation Galician Agency (Ref: IN852A 2013/57); (b) “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (Ref: BIA2014-58063-R)” funded by MINECO. Moreover, this work was also possible by the financial support of a pre-doctoral grant of Xunta de Galicia (Spain), also including the INDITEX-UDC 2015 grant for international pre-doctoral stays., Xunta de Galicia; IN852A 2013/57
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Long-term flexural performance of reinforced concrete beams with recycled coarse aggregates

  • Seara Paz, Sindy
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Carro-López, Diego
[Abstract:] The aim of this study is to investigate the behaviour of recycled aggregate concrete subjected to sustained loading. For the tests, eight reinforced concrete beams were manufactured with recycled coarse aggregate, using water-to-cement ratios of 0.50 and 0.65, and four replacement percentages: 0%, 20%, 50%, and 100%. First, the basic concrete properties, mechanical strength and modulus of elasticity, were determined after 28 d, and at the ageing load. The beam specimens were then loaded at 42 d, using a four-point bending test. Bending moments and deformations were obtained during the loading process, when cracking and serviceability conditions were reached, as well as the long-term deformations of recycled concrete beams up to 1000 d. Based on these results, it can be reported that long-term deformations are greater for recycled aggregate concrete than for conventional concrete, regarding both strain and deflection. Furthermore, a direct relationship was found between these deformations and the replacement percentage used. Lastly, code-based expressions were used to calculate the long-term deflections of RC beams subjected to sustained loading, which included the recycled coarse aggregate content and corrections previously proposed to predict the mechanical properties, creep, and shrinkage of recycled aggregate concrete., The study has been funded by: “CLEAM: Clean, efficient and nice construction along its life cycle” funded by the Centre for the Technology and Industrial Development (CDTI) and led by the Group of Economical Interest CLEAM-CENIT, AIE comprising by the country’s largest construction companies (Acciona, Dragados, Ferrovial, FCC, Isolux Corsán, OHL and Sacyr) and some PYME (Informática 68, Quilosa and Martínez Segovia y asociados). “HORREO: Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (BIA2014-58063-R)” funded by the Ministry of Economy and Competitiveness. The authors declare that they have no conflict of interest.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Alkali-activated slag concrete: Fresh and hardened behaviour

  • Puertas, Francisca
  • González-Fonteboa, Belén
  • González-Taboada, Iris
  • Alonso López, María del Mar
  • Torres Carrasco, Manuel
  • Rojo-López, Gemma
  • Martínez-Abella, Fernando
Versión aceptada de: https://doi.org/10.1016/j.cemconcomp.2017.10.003, [Abstract:] The behaviour of fresh and hardened alkali-activated slag (AAS) and OPC concretes was compared and the effect of mixing time assessed. OPC and AAS concrete slump and rheological results proved to differ, particularly when the slag was activated with waterglass (WG). The nature of the alkaline activator was the key determinant in AAS concrete rheology. Bingham models afforded a good fit to all the OPC and AAS concretes. In OPC and NaOH-activated AAS concretes, longer mixing had an adverse effect on rheology while improving hardened performance only slightly. In WG-AAS concrete, longer mixing times, improved mechanical properties and also rheological behaviour was enhanced, in which those conditions were required to break down the microstructure. Longer mixing raised thixotropy in OPC and NaOH-activated AAS concretes, but lowered the value of this parameter in waterglass-activated slag concrete., This study was funded by the Spanish Ministry of the Economy under Projects BIA2013-47876-C2-1-P and BIA2014-58063-R.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Tools for the study of self-compacting recycled concrete fresh behaviour: Workability and rheology

  • González-Taboada, Iris
  • González-Fonteboa, Belén
  • Eiras López, Javier
  • Rojo-López, Gemma
[Abstract] This work studies the fresh behaviour of self-compacting recycled concrete (SCRC) with different replacement percentages of recycled concrete coarse aggregate (20, 50 and 100%). To control the high absorption of recycled aggregate, three different mixing methods are also used in each studied concrete: M1 (dry aggregate and extra water), M2 (pre-soaked aggregate) and M3 (aggregate with a 3% of natural moisture and extra water). The fresh-state properties are measured with empirical and rheological tests, both carried out at 15, 45 and 90 min from the water-cement contact. Results obtained lead to conclude that rheology is the best tool to control fresh state behaviour of SCRC mixes and that Bingham 5-lowest is the suitable model to describe their rheological behaviour. Additionally, it has been concluded that the best method to produce SCRC is to compensate the recycled aggregate absorption during mixing using an extra quantity of water. With this method, self-compacting behaviour can be maintained with all replacement percentages until 45 min, and even until 90 min when the replacement ratio does not exceed 50%. Moreover, the use of the recycled coarse aggregate with a previous moisture content involves a greater difficulty to control workability and rheology than its use in dry-state condition., The study is part of two projects entitled: (a) “Industrial Investigation about Concrete for a Sustainable Market (InHorMeS)” funded by the Innovation Galician Agency; (b) “Robust self-compacting recycled concretes: rheology in fresh state and mechanical properties (Ref: BIA2014-58063-R)” funded by MINECO. Moreover, this work was also possible by the financial support of a pre-doctoral grant of Xunta de Galicia (Spain), also including the INDITEX-UDC 2015 grant for international pre-doctoral stays.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alkali-activated slag concrete: Fresh and hardened behaviour

  • Puertas, Francisca
  • González-Fonteboa, B.
  • González-Taboada, I.
  • Alonso López, M. del Mar
  • Torres-Carrasco, Manuel
  • Rojo, G.
  • Martínez Abella, Fernando
The behaviour of fresh and hardened alkali-activated slag (AAS) and OPC concretes was compared and the effect of mixing time assessed. OPC and AAS concrete slump and rheological results proved to differ, particularly when the slag was activated with waterglass (WG). The nature of the alkaline activator was the key determinant in AAS concrete rheology. Bingham models afforded a good fit to all the OPC and AAS concretes. In OPC and NaOH-activated AAS concretes, longer mixing had an adverse effect on rheology while improving hardened performance only slightly. In WG-AAS concrete, longer mixing times, improved mechanical properties and also rheological behaviour was enhanced, in which those conditions were required to break down the microstructure. Longer mixing raised thixotropy in OPC and NaOH-activated AAS concretes, but lowered the value of this parameter in waterglass-activated slag concrete., This study was funded by the Spanish Ministry of the Economy under Projects BIA2013-47876-C2-1-P and BIA2014-58063-R., Peer reviewed