Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rotational velocity for oblique structures (Boltaña anticline, Southern Pyrenees)

  • Mochales López, Tania
  • Casas-Sainz, Antonio M.
  • Pueyo Morer, Emilio Luis
  • Barnolas Cortina, Antonio
Review article, [EN] Despite the large amount of paleomagnetic and structural studies on fold and thrust belts, many key questions about rotational kinematics remain unsolved (pace of rotation, subsequent accommodation of the hanging wall, etc.). Excellent exposure conditions and syntectonic sedimentation related to the growth of oblique structures in the Southern Pyrenees allow an accurate investigation that sheds light on the rotational kinematics of thrust systems. Fifty-nine paleomagnetic sites (819 specimens) are homogeneously distributed in both limbs along the marine and continental sedimentary sequences contemporary with the uplift of the Boltaña anticline and its post-folding evolution. They indicate a clockwise rotation of about 52 during Ypresian to Priabonian times. Primary, stable (350 -580 C), pre-folding magnetization in the Eocene rocks is attested by a positive fold test and the antipodality proof, with magnetite and iron sulphide traces as magnetic carriers. Rotation velocity fits a logarithmic model and shows a low rate during the Ilerdian-Middle Lutetian interval (ca. 1 /m.y.) and much higher (up to 10 /m.y.) in the Late Lutetian-Priabonian interval. Most of the clockwise rotation of the Boltaña anticline can therefore be constrained within the 42e35 M.a. interval (partially post-folding), indicating a period of strong differential displacement in the southern Pyrenean Zone, probably related to the emplacement of the underlying External Sierras thrust sheets (Tozal-Alcanadre)., This work was sponsored by a fellowship from the Geological Survey of Spain (IGME). Research financial support comes from the projects Pmag3Drest (CGL-2006-2289-BTE MEC, CGL2009-14214 and CGL2008-00809/BTE MICINN), ChronoPyr (IGME-346) and 3DR3 (PI165/09 Gob. Aragón). Bases Europa (CAI-DGA) funded Tübingen and Rome stays., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chronostratigraphy of the Boltaña anticline and the Ainsa Basin (southern Pyrenees)

  • Mochales López, Tania
  • Barnolas Cortina, Antonio
  • Pueyo Morer, Emilio Luis
  • Serra Kiel, J.
  • Casas-Sainz, Antonio M.
  • Samsó, Josep Maria
  • Ramajo, Javier
  • Sanjuan, Josep
[EN] The Ainsa Basin (south-central Pyrenees) is an exceptional example of a syntectonic foreland basin where structures oblique to the Pyrenean trend are well preserved. The absence of a complete chronostratigraphic frame motivated us to perform a detailed magnetostratigraphic study in the Ainsa Basin, including the shallow-marine–continental transition. Three sections covering almost the entire Eocene sedimentary fi ll were sampled (Ara, Coscollar, and Mondot ), covering 2450 m of the sedimentary pile, with more than 1000 demagnetized specimens (sample spacing of 2.7 m). Data from previous magnetostratigraphic studies (Eripol section) allow us to complete the Eocene rec ord with an 840-m-long profi le within the Bartonian–Priabonian interval overlying the sampled sequence. Characteristic remanent magnetization (ChRM) directions were effectively isolated between 300 and 500 °C. Magnetite is the main magnetic carrier, with variable iron sulfi de content and occasional hematite. Fold tests indicate a prefolding magnetization. Biostratigraphy based on shallow benthic foraminifera (15 localities) and a locality with abundant charophyte gyrogonites help to constrain the local magnetostratigraphic record (20 reversals) between the early Ilerdian and the middle Priabonian. A global correlation based on a magnetostratigraphic composite section derived from this work allows us to propose a complete chronostratigraphic frame for the Ainsa Basin infi ll between 55 and 45 Ma. Accumulation rates range from 2 to 53 cm/k.y., responding to retrogradational to progradational features during the early Lutetian, and a progressive increase from the middle Lutetian onward related to overall continentalization of the basin. Westward migration of subsidence is associated with progressively younger synsedimentary structures nucleating westward of the older ones in the South Pyrenean Basin., This work was sponsored by a fellowship from the Geological Survey of Spain (IGME). Financial support for research comes from projects Pmag3Drest (CGL-2006-2289-BTE MEC, CGL2009-14214, and CGL2008-00809/BTE MICINN), ChronoPyr (IGME-346), and 3DR3 (PI165/09 Gob. Aragón)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinematic approach by means of AMS study in the Boltaña anticline (southern Pyrenees

  • Mochales López, Tania
  • Pueyo Morer, Emilio Luis
  • Casas-Sainz, Antonio M.
  • Barnolas Cortina, Antonio
[EN] In this work we present AMS results obtained from several profiles in the Lutetian, carbon-ate-slope sequence located in the eastern limb of the Boltaña anticline. The AMS analyses allow us todefine the deformational events related to the formation of the Boltaña anticline and its progressiverotation during Eocene (Late Lutetian) times, acting as a passive marker of the deformation, after a veryearly record of LPS during diagenesis., Research financial support comes from the projects Pmag3Drest (CGL-2006-2289-BTE MEC and CGL2009-14214 MICINN), 3DR3 & GeoPyrDatabases (PI165/09 and CTPP01/07 Gob, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic magnetic susceptibility record of the kinematics of the Boltaña Anticline (Southern Pyrenees)

  • Mochales López, Tania
  • Pueyo Morer, Emilio Luis
  • Casas-Sainz, Antonio M.
  • Barnolas Cortina, Antonio
  • Oliva-Urcia, Belén
[EN] Anisotropic magnetic susceptibility (AMS) analysis of 1454 samples evenly distributed along an 1800 m section in the South Pyrenean Zone is presented. The sampled rocks are pre- and syn-tectonic limestones, marls and sandstones of Ypresian-Lutetian age. They are weakly deformed rocks sampled from both limbs of the N–S trending Boltaña Anticline (oblique to the WNW–ESE main Pyrenean trend). Rock magnetism analyses, including low temperature and high field magnetic susceptibility measurements confirm a dominant paramagnetic signal and hence allow the interpretation of AMS in terms of preferred rock fabric or finite strain orientation. Therefore, this study was focused on obtaining an independent kinematic information from a vast set of AMS data from particular structural positions. The three directional maxima for the maximum axis of the magnetic ellipsoid (KMAX, magnetic lineation) can be tentatively related to major tectonic events in the Central Pyrenees. A first stage (recording a N–S magnetic lineation) is related to an oblique ramp of the Cotiella Thrust, emplaced during Ypresian times. A pseudo-progressive variation turns into a second stage (linked to a NW–SE KMAX orientation maximum) that can be related to Pyrenean compression. Both stages witness a far-field imprint of active structures on the foreland sediments. Once the Boltaña Anticline was nucleated (during the Lutetian), a predominant, more constant NW–SE trend is observed, this near-field magnetic fabric being the only lineation imprinted in the rocks. A final stage arrived in the course of vertical axis rotation during the Late Lutetian-Bartonian. This latest event was responsible for the present configuration of the Boltaña Anticline (N–S)., This work was supported by projects (CGL-2006-2289-BTE & CGL-2006-05817 of the Dirección General de Investigación, the ChronoPyr (2006-2009-IGME I+D 446) and CGL 2006-05817 of the Spanish Ministry of Science and Technology and a pre-doctoral grant from the Instituto Geológico y Minero de España to Tania Mochales., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A computed tomography approach for understanding 3D deformation patterns in complex folds

  • Ramón, M.
  • Pueyo, E. L.
  • Rodríguez-Pintó, A.
  • Ros, L. H.
  • Pocoví, A.
  • Briz, J. L.
  • Ciria, J. C.
Analog models are an important tool for understanding complexly folded and faulted geological structures. In this paper, we propose the use of X-ray computed tomography to accurately reconstruct the geometry of analog models using an orthogonal reference system and to completely characterize deformation patterns within the modeled structure in 3D. The rheology and radiological contrast of various different materials have been studied showing that EVA sheets are a good choice to model buckling layers. After considering various possibilities to define the reference system, we opted to screen-print two orthogonal sets of parallel lines on the surfaces using minium (lead tetroxide). The model was then built with gOcad using a series of CT slices that can be closely spaced. This kind of model allows us to reconstruct the volume distribution of strain ellipsoids and can be very accurate and useful to ascertain the orientation of folded lineations in complex structures as well as to characterize the expected deformation on the surfaces. We have built a simple analog model inspired in the Balzes Anticline (located in the External Sierras, Southern Pyrenees) to illustrate the potential of the technique and to analyze the deformation patterns of this complex curved fold that has accommodated significant magnitudes of vertical axis rotation during its formation.